Search

Selected results of investigations focused on the changes to some mechanical properties of palladium and several palladium-based alloys caused by exposure to hydrogen have been collected and presented. The findings indicate that the mechanical properties of pure palladium are highly susceptible to alteration upon exposure to hydrogen. In the cases of alloying palladium with silver and copper, the alloys, as compared to palladium, appear to resist changes to mechanical properties. In the case of alloying palladium with manganese, the interesting order–disorder phenomenon plays an important role on the effects of hydrogen exposure on their mechanical properties. [ABSTRACT FROM AUTHOR]

The yield strength, ultimate strength, and elongation/ductility properties of a series of palladium–copper alloys were characterized as a function of the temperature at which each alloy underwent absorption and desorption of hydrogen. The alloys studied ranged in copper content from 5 weight percent copper to 25 wt.% copper. Compared to alloy specimens that had been well-annealed in a vacuum and never exposed to hydrogen, alloys with copper content up to 15 wt.% showed strengthening and loss of ductility due to hydrogen exposure. In these alloys, it was found that the degree of strengthening and loss of ductility was dependent on the hydrogen exposure temperature, though this dependence decreased as the copper content of the alloy increased. For alloys with copper contents greater than 15 wt.%, hydrogen exposure had no discernible effect on the strength and ductility properties compared to the vacuum-annealed alloys, over the entire temperature range studied. [ABSTRACT FROM AUTHOR]

Strength, hardness, and ductility characteristics were determined for a series of palladiumcopper alloys that compositionally vary from 5 to 25 weight percent copper. Alloy specimens subjected to vacuum annealing showed clear evidence of solid solution strengthening. These specimens showed, as a function of increasing copper content, increased yield strength, ultimate strength, and Vickers microhardness, while their ductility was little affected by compositional differences. Annealed alloy specimens subsequently subjected to exposure to hydrogen at 323 K and PH2 = 1 atm showed evidence of hydrogen embrittlement up to a composition of ~15 wt. % Cu. The magnitude of the hydrogen embrittlement decreased with increasing copper content in the alloy. [ABSTRACT FROM AUTHOR]