Search

Summary In this paper, an optimal energy dissipation control algorithm is applied into a semi-active suspension-type tuned mass damper (SA-STMD) to suppress excessive vibration by means of variable pendulum length. The SA-STMD mechanism consists of a mass block, a suspension rope, and a movable fulcrum that can be a short tube driven by a linear motor to vertically move along the suspension rope. As the fulcrum goes up, the pendulum length is extended, resulting in a smaller stiffness of the SA-STMD, and vice versa. Accordingly, the restoring force in the SA-STMD can be adjusted by varying the fulcrum positions. In the case where the energy dissipation ability by the original STMDs is insufficient, the movable fulcrum in the SA-STMD system can compensate the STMDs for stiffness according to the proposed optimal energy dissipation control algorithm to provide controllable restoring forces. The controllable restoring forces are designed to act as viscous dampers that can make up for the lack of energy dissipation capacity. The numerical results from the time domain and frequency domain analyses show that the proposed approach utilizing the optimal energy dissipation control algorithm to adjust the pendulum length can induce controllable restoring forces with a butterfly-shaped hysteresis loop, supplying a sufficient energy dissipation capacity to reduce responses to the unexpectedly large external vibration. Another potential benefit is cost reduction because of use of a less number of conventional viscous dampers in the STMD system. Copyright © 2016 John Wiley & Sons, Ltd.

The present study aims at proposing an innovative phase control methodology for semi-active tuned mass dampers (SA-TMDs) that intend to minimize the off-tuned problems associated with passive tuned mass dampers (P-TMDs). The phase control algorithm is first developed, the essential of which is to apply the variable friction force to slow down the mass block at specific moments when the phase lag of the SA-TMD with respect to the structure is different from 90°, resulting in the SA-TMD back to the desired phase lag, i.e., −90° phase deviation, so that the SA-TMD has the maximum power flow to reduce the structural vibration. The feasibility of the application of the phase control in SA-TMDs is verified by performing numerical analyses of a simplified Taipei 101 structure model with a SA-TMD subjected to sinusoidal loads and design level wind loads. The numerical simulation results show that the SA-TMD implemented with phase control can enable the mass block to vibrate in a manner with a phase lag close to the −90° when the structure model is under sinusoidal excitations with frequencies different from the structural fundamental mode. The SA-TMD with phase control not only exhibits better performance than the optimal P-TMD in terms of suppressing the structural vibration, but also enhances its robustness, particularly when the SA-TMD is off-tuned to the structure.

SUMMARY Optimal design for tuned mass dampers (TMDs) with linear or nonlinear viscous damping is formulated in order for design practitioners to directly compute the optimal parameters of a TMD in a damped structure subjected to wind excitations. The optimal TMD tuning frequency ratio and damping coefficient for a viscous TMD system installed in a damped structure under 10 white noise excitations are determined by using the time-domain optimization procedure, which minimizes the structural response. By applying a sequence of curve-fitting schemes to the obtained optimal values, design formulas for optimal TMDs are then derived. These are expressed as a function of the mass ratio and damping power-law exponent of the TMD as well as the damping ratio of the structure. The feasibility of the proposed optimal design formulas is verified in terms of formulary accuracy and of comparisons with existing formulas from previous research works. In addition, one numerical example of the Taipei 101 building with a nonlinear TMD, which is redesigned according to the proposed optimal formulas, is illustrated in effort to describe the use of the formulas in the TMD design procedure and to investigate the effectiveness of the optimal TMD. The results indicate that the proposed optimal design formulas provide a convenient and effective approach for designing a viscous TMD installed in a wind-excited damped structure. Copyright © 2011 John Wiley & Sons, Ltd.

Optimal design theory for linear tuned mass dampers (TMD) has been thoroughly investigated, but is still under development for nonlinear TMDs. In this paper, optimization procedures in the time domain are proposed for design of a TMD with nonlinear viscous damping. A dynamic analysis of a structure implemented with a nonlinear TMD is conducted first. Optimum design parameters for the nonlinear TMD are searched using an optimization method to minimize the performance index. The feasibility of the proposed optimization method is illustrated numerically by using the Taipei 101 structure implemented with TMD. The sensitivity analysis shows that the performance index is less sensitive to the damping coefficient than to the frequency ratio. Time history analysis is conducted using the Taipei 101 structure implemented with different TMDs under wind excitation. For both linear and nonlinear TMDs, the comfort requirements for building occupants are satisfied as long as the TMD is properly designed. It was found that as the damping exponent increases, the relative displacement of the TMD decreases but the damping force increases.