Search

The crustal structure of the NE Flemish Cap margin was determined along a 460-km-long refraction/wide-angle reflection seismic transect (FLAME Line) to define the thickness, structure and composition of the crust and uppermost mantle along the line. A P-wave velocity model was developed from forward and inverse modelling of dense airgun shots recorded by 19 ocean bottom seismometers. A coincident multichannel seismic profile was used to guide the modelling as reflections could be identified down to Moho. The model displays a sediment cover of up to 3.6-km-thick, subdivided into three layers with velocities of 1.8-1.9 km s, 2.8-3.1 km s and 4.7-4.8 km s. For the western part of the FLAME Line over Flemish Cap, the P-wave velocity model displays an up to 32-km-thick, three-layer continental crust. The continental crust has velocities of 5.8-6.1 km s, 6.3-6.45 km s and 6.65-6.85 km s and thicknesses of about 5 km, 7 km and 20 km in the upper, middle and lower layers, respectively. The thick continental crust thins to a two-layer, 6-km-thick crust (upper layer is 5.55-6.0 km s and the layer below is 6.65-6.8 km s) over a distance of 45 km. S-wave velocities are determined in the upper layer of the thick continental crust over Flemish Cap and the transition zone by assigning Poisson's ratios in the P-wave velocity model. Comparison of calculated to observed arrival times gives a Poisson's ratio of 0.27 in the upper layer and 0.28 in the layer below, which suggests that the composition of the crust is primarily continental in both the thick crust and the thin crust of the transition zone. The thin continental crust is stretched over a width of 80 km and is underlain by a layer with velocities of 7.5-7.9 km s. We interpret this layer as partially serpentinized mantle, which is consistent with observations from the Newfoundland margin to the south. The serpentinized mantle terminates 30 km seaward of the thick continental crust. At the seaward-most end of the thin continental crust, a prominent ridge feature is observed. The seismic refraction and multichannel seismic data results indicate a mixed character between serpentinized mantle with volcanic extrusions or continental crust. The reflection seismic data show a high relief basement from the ridge feature and seaward. The FLAME Line crosses magnetic anomaly 34 and extends another ∼50 km seaward well into oceanic crust. The ridge is flanked seaward by a two-layer oceanic crust. The upper layer (Layer 2) has velocities of 4.8-5.0 km s for the landward-most 35 km of oceanic crust and 4.8-6.2 km s for the seaward 60 km. The average thickness of Layer 2 is ∼2 km. The lower layer (Layer 3) has velocities of 6.7-7.2 km s and a thickness of ∼3.5 km. The velocity model is consistent with a sharp onset of seafloor spreading seaward of the ridge feature. [ABSTRACT FROM AUTHOR]

A P-wave velocity model along a 565-km-long profile across the Grand Banks–Newfoundland Basin rifted margin is presented. Continental crust ∼36 km thick beneath the Grand Banks is divided into upper (5.8–6.25 km s−1), middle (6.3–6.53 km s−1) and lower crust (6.77–6.9 km s−1), consistent with velocity structure of Avalon zone Appalachian crust. Syn-rift sediment sequences 6–7 km thick occur in two primary layers within the Jeanne d'Arc and the Carson basins (∼3 km s−1 in upper layer; ∼5 km s−1 in lower layer). Abrupt crustal thinning (Moho dip ∼35°) beneath the Carson basin and more gradual thinning seaward forms a 170-km-wide zone of rifted continental crust. Within this zone, lower and middle continental crust thin preferentially seawards until they are completely removed, while very thin (<3 km) upper crust continues ∼60 km farther seawards. Adjacent to the continental crust, high-velocity gradients (0.5–1.5 s−1) define an 80-km-wide zone of transitional basement that can be interpreted as exhumed, serpentinized mantle or anomalously thin oceanic crust, based on its velocity model alone. We prefer the exhumed-mantle interpretation after considering the non-reflective character of the basement and the low amplitude of associated magnetic anomalies, which are atypical of oceanic crust. Beneath both the transitional basement and thin (<6 km) continental crust, a 200-km-wide zone with reduced mantle velocities (7.6–7.9 km s−1) is observed, which is interpreted as partially (<10 per cent) serpentinized mantle. Seawards of the transitional basement, 2- to 6-km-thick crust with layer 2 (4.5–6.3 km s−1) and layer 3 (6.3–7.2 km s−1) velocities is interpreted as oceanic crust. Comparison of our crustal model with profile IAM-9 across the Iberia Abyssal Plain on the conjugate Iberia margin suggests asymmetrical continental breakup in which a wider zone of extended continental crust has been left on the Newfoundland side. [ABSTRACT FROM AUTHOR]

New multichannel seismic reflection data were collected over a 565 km transect covering the non-volcanic rifted margin of the central eastern Grand Banks and the Newfoundland Basin in the northwestern Atlantic. Three major crustal zones are interpreted from west to east over the seaward 350 km of the profile: (1) continental crust; (2) transitional basement and (3) oceanic crust. Continental crust thins over a wide zone (∼160 km) by forming a large rift basin (Carson Basin) and seaward fault block, together with a series of smaller fault blocks eastwards beneath the Salar and Newfoundland basins. Analysis of selected previous reflection profiles (Lithoprobe 85-4, 85-2 and Conrad NB-1) indicates that prominent landward-dipping reflections observed under the continental slope are a regional phenomenon. They define the landward edge of a deep serpentinized mantle layer, which underlies both extended continental crust and transitional basement. The 80-km-wide transitional basement is defined landwards by a basement high that may consist of serpentinized peridotite and seawards by a pair of basement highs of unknown crustal origin. Flat and unreflective transitional basement most likely is exhumed, serpentinized mantle, although our results do not exclude the possibility of anomalously thinned oceanic crust. A Moho reflection below interpreted oceanic crust is first observed landwards of magnetic anomaly M4, 230 km from the shelf break. Extrapolation of ages from chron M0 to the edge of interpreted oceanic crust suggests that the onset of seafloor spreading was ∼138 Ma (Valanginian) in the south (southern Newfoundland Basin) to ∼125 Ma (Barremian–Aptian boundary) in the north (Flemish Cap), comparable to those proposed for the conjugate margins. [ABSTRACT FROM AUTHOR]

The central Nova Scotia margin off Eastern Canada is located at a transition from a volcanic margin in the south to a non-volcanic margin in the north. In order to study this transition, a wide-angle refraction seismic line with dense airgun shots was acquired across the central Nova Scotia margin. The 500-km-long transect is coincident with previous deep reflection profiles across the Lahave Platform and extending into the Sohm Abyssal Plain. A P-wave velocity model was developed from forward and inverse modelling of the wide-angle data from 21 ocean bottom seismometers and coincident normal-incidence reflection profiles. The velocity model shows that the continental crust is divided into three layers with velocities of 5.5–6.9 km s−1. The maximum thickness is 36 km. A minor amount (∼5 km) of thinning occurs beneath the outer shelf, while the major thinning to a thickness of 8 km occurs over the slope region. The seaward limit of the continental crust consists of 5-km-thick highly faulted basement. There is no evidence for magmatic underplating beneath the continental crust. On the contrary, a 4-km-thick layer of partially serpentinized mantle (7.6–7.95 km s−1) begins beneath the highly faulted continental crust, and extends ∼200 km seawards, forming the lower part of the ocean-continent transition zone. The upper part of the transition zone consists of the highly faulted continental crust and 4- to 5-km-thick initial oceanic crust. The continent–ocean boundary is moved ∼50 km farther seawards compared to an earlier interpretation based only on reflection seismic data. The oceanic crust in the transition zone consists of layer 2 and a high-velocity lower crustal layer. Layer 2 is 1–3 km thick with velocities of 5.6–6.0 km s−1. The high-velocity lower crustal layer is 1–2 km thick with velocities of 7.25–7.4 km s−1, suggesting a composite layer of serpentinized peridotite and gabbroic layer 3. Oceanic crust with normal thickness of 5–7 km and more typical layer 3 with velocities of 6.95–7.3 km s−1 is observed at the seaward end of the profile. [ABSTRACT FROM AUTHOR]

Our 2‐D‐layered velocity model along strike northeastern Nova Scotian margin, constrained by wide‐angle seismic Profile OCTOPUS and coincident 9‐km streamer Profile GXT‐5100, displays highly variable basement structures interpreted to define four distinct zones within the continent‐ocean transition: Zone I, with thin (1–2 km) and laterally uniform upper crust (5.2–5.5 km/s) and high‐velocity lower crust (6.5–7.7 km/s); Zone II, with velocities of 5.5–7.5 km/s and a high vertical velocity gradient (∼1.1/s) characteristic of exhumed serpentinized (up to 90%) mantle (ESM) above ∼3.5‐km‐thick slightly (<30%) serpentinized mantle layer of reduced mantle velocities (7.5–8.0 km/s); Zone III, with 1‐ to 2‐km‐thick upper crust and velocity of ∼5.2 km/s above a ∼6‐km‐thick, moderately (<60%) serpentinized mantle layer (velocity ∼6.4–7.9 km/s); and Zone IV, with lower crust (∼0.7–3.0 km thick and with velocity of 6.1–6.6 km/s) between upper crust (velocity ∼5.0–5.4 km/s) and a slightly serpentinized mantle layer (<40%; velocity ∼7.3–8.0 km/s). These continent‐ocean transition structures represent embryonic oceanic or rifted continental crust, and ESM. By combining our results with those from two dip‐oriented crossing profiles, we map a regional track of non‐ESM landward of Profile OCTOPUS with mostly uniform along‐dip width, but a limited extent and variable width section of ESM seaward. Our results indicate that there can be a remarkable amount of short‐wavelength (e.g., 50 km) lateral structural variability within individual rifted margin segments but that mapping it requires a grid of modern wide‐angle profiles. Key Points: Continent‐ocean transition at the northeastern Nova Scotia Margin displays highly variable short‐wavelength tectonic structures along strikeWidespread serpentinized mantle is found beneath the transitional crust with exhumed serpentinized mantle present only locallyCapturing structural changes relevant to detailed rift tectonic studies requires a dense grid of high‐resolution wide‐angle seismic profiles [ABSTRACT FROM AUTHOR]