Search

Objective: Sight-threatening infections can be caused by pathogenic micro-organisms colonising the cornea, leading to microbial keratitis (MK). These micro-organisms can be introduced to the eye via improper contact lens use and care. MK can also result from ineffective contact lens care solutions (CLCs), even if the patient is following best practice guidelines. Therefore, it is critical to understand the differences between the effectiveness of popular CLCs on the global market., Methods and Analysis: Following the International Standards Organisation standards 14 729 and 18259, bacteria ( Pseudomonas aeruginosa, Serratia marcescens, Staphylococcus aureus ), fungi ( Candida albicans, Fusarium strains) and Acanthamoeba strains were inoculated into each CLC with and without contact lenses, and held for the manufacturer's stated disinfection time. Plate counts were conducted to determine the number of surviving micro-organisms., Results: All CLCs examined met the primary log reduction criteria during stand-alone testing for Pseudomonas, Staphylococcus, Candida and Fusarium . renu Multiplus, All Clean Soft, and Kombilösung Super did not meet the primary criteria when challenged with Serratia . Only OPTI-FREE Express exceeded 4 log reduction for both strains of Acanthamoeba tested. We noted a substantial reduction in disinfection efficacy when CLCs were challenged with Fusarium in the presence of lenses and cases versus stand-alone testing. OPTI-FREE Express demonstrated significantly less net log reduction loss than the other four CLCs tested., Conclusion: Of the popular CLCs on the global market, the product which relies on dual biocides polyquaternium-1 and myristamidopropyl dimethylamine demonstrated the highest disinfection efficacy in microbial disinfection challenges in the absence and presence of contact lenses., Competing Interests: Competing interests: All authors are/were employees of Alcon Research., (© Author(s) (or their employer(s)) 2022. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Acanthamoeba keratitis is a sight-threatening infection of the cornea which is extremely challenging to treat. Understanding this organism's responses during contact lens contact and disinfection could enhance our understanding of how Acanthamoebae colonize contact lens cases, better inform us on contact lens care solution (CLC) efficacy, and help us better understand the efficacy required of CLC products. To explore this gap in knowledge, we used Acanthamoeba ATCC 30461 and ATCC 50370 trophozoites to examine Acanthamoeba behavior during and after CLC disinfection. Amoebae were added to sterile aluminum flow cells and flow cell solutions were changed to Ringer's solution (control), or one of four CLCs based on biocides (PHMB, PAPB/Polyquad, Polyquad/Aldox, or Polyquad/Alexidine) for 6 h. Each flow cell solution was then changed to axenic culture media (AC6) for 12 h to determine the behavior of amoebae following disinfection. Distance, speed, and displacement were calculated for each organism. As compared to the control of one-quarter Ringer's solution, each CLC significantly impacted Acanthamoeba motility in both the CLC and AC6 conditions. However, the amoebae challenged with the PHMB CLC traveled a significantly greater total distance than with the other three CLCs, indicating differences in effectiveness between biocides. Furthermore, amoebae regaining motility post-disinfection by CLCs were observed to travel considerable distances and thus could be considered dangerous to ocular health. We determined that while all CLCs produced a substantial or complete cessation of movement vs. the control condition during disinfection, those which relied on the Polyquad biocides were the most effective, and that any amoebae which survived disinfection were able to recover motility. Future examinations of these findings should include direct correlations between motility and viability, and how infectivity and motility may be related. [ABSTRACT FROM AUTHOR]

Introduction: Acanthamoeba keratitis is often caused when Acanthamoeba contaminate contact lenses and infect the cornea. Acanthamoeba is pervasive in the environment as a motile, foraging trophozoite or biocide resistant and persistent cyst. As contact lens contamination is a potential first step in infection, we studied Acanthamoeba’s behavior and interactions on different contact lens materials. We hypothesized that contact lenses may induce aggregation, which is a precursor to encystment, and that aggregated encystment would be more difficult to disinfect than motile trophozoites. Methods: Six clinically and/or scientifically relevant strains of Acanthamoeba (ATCC 30010, ATCC 30461, ATCC 50370, ATCC 50702, ATCC 50703, and ATCC PRA-115) were investigated on seven different common silicone hydrogel contact lenses, and a no-lens control, for aggregation and encystment for 72 h. Cell count and size were used to determine aggregation, and fluorescent staining was used to understand encystment. RNA seq was performed to describe the genome of Acanthamoeba which was individually motile or aggregated on different lens materials. Disinfection efficacy using three common multi-purpose solutions was calculated to describe the potential disinfection resistance of trophozoites, individual cysts, or spheroids. Results: Acanthamoeba trophozoites of all strains examined demonstrated significantly more aggregation on specific contact lens materials than others, or the no-lens control. Fluorescent staining demonstrated encystment in as little as 4 hours on contact lens materials, which is substantially faster than previously reported in natural or laboratory settings. Gene expression profiles corroborated encystment, with significantly differentially expressed pathways involving actin arrangement and membrane complexes. High disinfection resistance of cysts and spheroids with multi-purpose solutions was observed. Discussion: Aggregation/encystment is a protective mechanism which may enable Acanthamoeba to be more disinfection resistant than individual trophozoites. This study demonstrates that some contact lens materials promote Acanthamoeba aggregation and encystment, and Acanthamoeba spheroids obstruct multi-purpose solutions from disinfecting Acanthamoeba. [ABSTRACT FROM AUTHOR]

Microbial keratitis (MK) is an eye infection caused by opportunistic bacteria or fungi, which may lead to sight-threatening corneal ulcers. These microorganisms can be introduced to the eye via improper contact lens usage or hygiene, or ineffective multipurpose solutions (MPSs) to disinfect daily wear contact lenses. Thus, the patient's choice and use of these MPSs is a known risk factor for the development of MK. It is then critical to determine the efficacy of popular MPSs against ubiquitous ocular microorganisms. Therefore, we compare the efficacy of nine major MPSs on the global market against four different microorganism species, and with four different common contact lenses. In accordance with International Standards Organization protocol 14729 and 18259, the microorganisms were inoculated into each MPS with and without contact lenses, and held for the manufacturer's disinfection time, 24 h, and 7 days after challenge with Serratia marcescens or Fusarium spp. Plates were incubated for 2–7 days and plate counts were conducted to determine the number of surviving microorganisms. The majority of MPSs demonstrated significantly higher disinfection efficacies without contact lenses. Broadly, among the microorganisms tested, the OPTI-FREE products (Puremoist, Express, and Replenish) maintained the highest disinfection efficacies at the manufacturer's stated disinfection time when paired with any contact lens, compared with other MPSs. These were followed closely by RevitaLens and renu Advanced. MPSs containing dual biocides polyquaternium-1 and myristamidopropyl dimethylamine possessed the highest disinfection efficacy against multiple ocular pathogens. [ABSTRACT FROM AUTHOR]

Acanthamoeba keratitis is a serious ocular infection which is challenging to treat and can lead to blindness. While this pathogen is ubiquitous and can contaminate contact lenses after contact with water, its habits remain elusive. Understanding this organism's natural behavior will better inform us on how Acanthamoeba colonize contact lens care systems. Acanthamoeba trophozoites were allowed to adhere to either a glass coverslip or non-nutrient agar (NNA) within a flow cell with nutrients (Escherichia coli or an axenic culture medium (AC6)) or without nutrients (Ringer's solution). Images were taken once every 24 s over 12 h and compiled, and videos were analyzed using ImageJ Trackmate software. Acanthamoeba maintained continuous movement for the entire 12 h period. ATCC 50370 had limited differences between conditions and surfaces throughout the experiment. Nutrient differences had a noticeable impact for ATCC 30461, where E. coli resulted in the highest total distance and speed during the early periods of the experiment but had the lowest total distance and speed by 12 h. The Ringer's and AC6 conditions were the most similar between strains, while Acanthamoeba in the E. coli and NNA conditions demonstrated significant differences between strains (p < 0.05). These results indicate that quantifiable visual tracking of Acanthamoeba may be a novel and robust method for identifying the movement of Acanthamoeba in relation to contact lens care products. The present study indicates that Acanthamoeba can undertake sustained movement for at least 12 h with and without nutrients, on both rough and smooth surfaces, and that different strains have divergent behavior. [ABSTRACT FROM AUTHOR]

Acanthamoeba keratitis (AK) is a serious ocular infection caused by a ubiquitous free-living amoeba, Acanthamoeba. This infection often results in extensive corneal damage and blindness, and is notoriously difficult to cure. While Acanthamoeba is an abundant organism, AK is most associated with contact lens hygiene noncompliance and inadequate contact lens care (CLC) disinfection regimens. Thus, accurate and timely antimicrobial efficacy testing of CLC solutions is paramount. Published methods for antimicrobial efficacy testing of Acanthamoeba trophozoites requires 14 days for results. Presently, alternate and/or rapid methods for evaluating CLC products rarely demonstrate equivalent results compared to commonly-reported methods. Propidium iodide is a cellular stain that can only bind to cells with damaged outer membranes. We evaluated propidium iodide staining as an alternative method for determining the relative antimicrobial efficacy of 11 different CLC products against Acanthamoeba trophozoites. Following exposure to a CLC product, the fluorescence intensity of propidium iodide in an Acanthamoeba population demonstrated a strong correlation to the log reduction determined by established, growth-based Acanthamoeba testing used to evaluate the antimicrobial efficacy of CLC products. Thus, propidium iodide was found to be an effective rapid tool for determining cell death in Acanthamoeba trophozoites following exposure to CLC solutions. [ABSTRACT FROM AUTHOR]