Search

Based on Hertz elastic contact theory, the contact mechanics model of two cosine wave is established. The mechanical characteristics of the model in the elastic, elastic-plastic, and plastic stages were studied. The influence of load on contact deformation and other characteristics is considered. The finite element method is used to analyze the deformation process of the model, and the results are compared with those of the mechanical model. The effects of amplitude and wavelength of cosine wave on its mechanical characteristics are discussed. The results show that the model reflects the relationship between the load and the mechanical characteristics of the model, and the difference of amplitude and wavelength will affect this characteristic. [ABSTRACT FROM AUTHOR]

Based on Hertz contact theory, an elastic-plastic contact mechanics model of outer cylinder under different contact angles of axis is proposed. The relationship among contact angle, load and contact deformation, contact stiffness and contact area is established. The finite element method is used to simulate the elastic-plastic contact process of the cylinder. The influence of the load and radius of the cylinder model on the contact deformation and the contact stiffness is compared and analyzed under different contact angles. The error of the analysis results of the finite element and the mechanical model is within 9%. On this basis, the influence of contact deformation, contact area and contact angle on the contact stiffness of the outer cylinder in elastic and plastic stage is explored. The results show that in the stage of elastic and plastic deformation, the amount of contact deformation and contact area increase with the increase of load. The contact stiffness decreases with the increase of contact angle and increases with the increase of cylinder radius. The amount of contact deformation decreases with the increase of cylinder radius, and tends to constant gradually. In the elastic stage, the contact stiffness increases with the increase of load. The contact area decreases with the increase of contact angle and increases with the increase of cylinder radius. In the plastic stage, the contact stiffness is constant with the increase of load, and the contact area is independent of contact angle and cylinder radius. [ABSTRACT FROM AUTHOR]