Search

Background: Early detection of marginal bone loss is vital for treatment planning and prognosis of teeth and implant. This study was conducted to assess diagnostic accuracy of CBCT compared to intra-oral (IO) radiography for detection, classification, and measurement of peri-implant bone defects in an animal model., Methods: Fifty-four mandible blocks with implants were harvested from nine male health adult beagle dogs with acquisition of IO, CBCT and micro-CT images from all samples. Peri-implant bone defects from 16 samples were diagnosed using micro-CT and classified into 3 defect categories: dehiscence (n = 5), infrabony defect (n = 3) and crater-like defect (n = 8). Following training and calibration of the observers, they asked to detect location (mesial, distal, buccal, lingual) and shape of the defect (dehiscence, horizontal defect, vertical defect, carter-like defect) utilizing both IO and CBCT images. Both observers assessed defect depth and width on IO, CBCT and micro-CT images at each side of peri-implant bone defect via CT-analyzer software. Data were analyzed using SPSS software and a p value of < 0.05 was considered as statistically significant., Results: Overall, there was a high diagnostic accuracy for detection of bone defects with CBCT images (sensitivity: 100%/100%), while IO images showed a reduction in accuracy (sensitivity: 69%/63%). Similarly, diagnostic accuracy for defect classification was significantly higher for CBCT, whereas IO images were unable to correctly identify vestibular dehiscence, with incorrect assessment of half of the infrabony defects. For accuracy of measuring defect depth and width, a higher correlation was observed between CBCT and gold standard micro-CT (r = 0.91, 95% CI 0.86-0.94), whereas a lower correlation was seen for IO images (r = 0.82, 95% CI 0.67-0.91)., Conclusions: The diagnostic accuracy and reliability of CBCT was found to be superior to IO imaging for the detection, classification, and measurement of peri-implant bone defects. The application of CBCT adds substantial information related to the peri-implant bone defect diagnosis and decision-making which cannot be achieved with conventional IO imaging.

Assessing the possible biological effects of exposure to low doses of ionizing radiation (IR) is one of the prime challenges in radiation protection, especially in medical imaging. Today, radiobiological data on cone beam CT (CBCT) related biological effects are scarce. In children and adults, the induction of DNA double strand breaks (DSBs) in buccal mucosa cells and 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxo-dG) and antioxidant capacity in saliva samples after CBCT examination were examined. No DNA DSBs induction was observed in children nor adults. In children only, an increase in 8-oxo-dG levels was observed 30 minutes after CBCT. At the same time an increase in antioxidant capacity was observed in children, whereas a decrease was observed in adults. Our data indicate that children and adults react differently to IR doses associated with CBCT. Fully understanding these differences could lead to an optimal use of CBCT in different age categories as well as improved radiation protection guidelines.

Objectives: Cone-beam CT (CBCT) is a medical imaging technique used in dental medicine. However, there are no conclusive data available indicating that exposure to X-ray doses used by CBCT are harmless. We aim, for the first time, to characterize the potential age-dependent cellular and subcellular effects related to exposure to CBCT imaging. Current objective is to describe and validate the protocol for characterization of cellular and subcellular changes after diagnostic CBCT., Methods: Development and validation of a dedicated two-part protocol: 1) assessing DNA double strand breaks (DSBs) in buccal mucosal (BM) cells and 2) oxidative stress measurements in saliva samples. BM cells and saliva samples are collected prior to and 0.5 h after CBCT examination. BM cells are also collected 24 h after CBCT examination. DNA DSBs are monitored in BM cells via immunocytochemical staining for γH2AX and 53BP1. 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxo-dG) and total antioxidant capacity are measured in saliva to assess oxidative damage., Results: Validation experiments show that sufficient BM cells are collected (97.1 ± 1.4 %) and that γH2AX/53BP1 foci can be detected before and after CBCT examination. Collection and analysis of saliva samples, either sham exposed or exposed to IR, show that changes in 8-oxo-dG and total antioxidant capacity can be detected in saliva samples after CBCT examination., Conclusion: The DIMITRA Research Group presents a two-part protocol to analyze potential age-related biological differences following CBCT examinations. This protocol was validated for collecting BM cells and saliva and for analyzing these samples for DNA DSBs and oxidative stress markers, respectively.

Objective:: To develop and validate an automated classification method that determines the trabecular bone pattern at implant site based on three-dimensional bone morphometric parameters derived from CBCT images., Methods:: 25 human cadaver mandibles were scanned using CBCT clinical scanning protocol. Volumes-of-interest comprising only the trabecular bone of the posterior regions were selected and segmented for three-dimensional morphometric parameters calculation. Three experts rated all bone regions into one of the three trabecular pattern classes (sparse, intermediate and dense) to generate a reference classification. Morphometric parameters were used to automatically classify the trabecular pattern with linear discriminant analysis statistical model. The discriminatory power of each morphometric parameter for automatic classification was indicated and the accuracy compared to the reference classification. Repeated-measures analysis of variances were used to statistically compare morphometric indices between the three classes. Finally, the outcome of the automatic classification was evaluated against a subjective classification performed independently by four different observers., Results:: The overall correct classification was 83% for quantity-, 86% for structure-related parameters and 84% for the parameters combined. Cross-validation showed a 79% model prediction accuracy. Bone volume fraction (BV/TV) had the most discriminatory power in the automatic classification. Trabecular bone patterns could be distinguished based on most morphometric parameters, except for trabecular thickness (Tb.Th) and degree of anisotropy (DA). The interobserver agreement between the subjective observers was fair (0.25), while the test-retest agreement was moderate (0.46). In comparison with the reference standard, the overall agreement was moderate (0.44)., Conclusion:: Automatic classification performed better than subjective classification with a prediction model comprising structure- and quantity-related morphometric parameters., Advances in Knowledge:: Computer-aided trabecular bone pattern assessment based on morphometric parameters could assist objectivity in clinical bone quality classification.

Objectives: The objective of the study is to assess the correlation between the mandibular canal tracing done on cone beam CT (CBCT) data, with the size, shape, and position of the neurovascular bundle (NB) obtained by magnetic resonance imaging (MRI)., Material and Methods: Six human cadaver mandibles were scanned with a CBCT Promax® scanner (Planmeca, Helsinki, Finland) and with an Ingenia® 3.0 T MR system (Philips, Amsterdam, The Netherlands). The NB was segmented from the MRI dataset, while the mandibular canal (MC) tracing was done on the CBCT images. Quantitative 3D analysis was made for the full-segmented nerves and for three defined regions of specific clinical interest, namely angle, body, and mental region., Results: From the 3D MRI analysis, the nerve thickness (for the angle, body, and mental region) ranges from 0.8 to 5.2 mm, while the thickness of the mandibular canal tracing is approximately 2.00 mm on both sides as chosen in the tracing software. The mean volume of the NB on the left is 828.49 ± 215.54 mm 3 and on the right 792.98 ± 264.57 mm 3 . For the nerve tracing, the mean value is 351.92 ± 16.42 and 339.69 ± 16.12 mm 3 on the left and right sides, respectively. Wilcoxon signed-rank test showed significant differences between NB and MC volume measurements (p = 0.0005). The Bland-Altman plots show an increasing slope for thickness and volume, indicating that the absolute differences between neurovascular bundle, estimated by MRI, and the mandibular canal, drawn on the CBCT images, increase with larger mean values., Conclusions: Surgeons should be aware of the shortcomings of nerve tracing in the different regions of the mandible., Clinical Relevance: Tracing of the inferior alveolar nerve (IAN) underestimates shape and volume. Whenever nerve tracing instead of well-recognizable anatomical bony landmarks is used for surgical planning that need precision, a wider safe margin is recommended.

Objectives: The aim of this study was to assess the influence of the number of basis images and the orientation of the skull on the evaluation of cortical alveolar bone in cone beam computed tomography (CBCT)., Study Design: Eleven skulls with a total of 59 anterior teeth were selected. CBCT images were acquired by using 4 protocols, by varying the rotation of the tube-detector arm and the orientation of the skull (protocol 1: 360°/0°; protocol 2: 180°/0°; protocol 3: 180°/90°; protocol 4: 180°/180°). Observers evaluated cortical bone as absent, thin, or thick. Direct observation of the skulls was used as the gold standard. Intra- and interobserver agreement, as well as agreement of scoring between the 3 bone thickness classifications, were calculated by using the κ statistic. The Wilcoxon signed-rank test was used to compare the 4 protocols., Results: For lingual cortical bone, protocol 1 showed no statistical difference from the gold standard. Higher reliability was found in protocol 3 for absent (κ = 0.80) and thin (κ = 0.47) cortices, whereas for thick cortical bone, protocol 2 was more consistent (κ = 0.60). In buccal cortical bone, protocol 1 obtained the highest agreement for absent cortices (κ = 0.61), whereas protocol 4 was better for thin cortical plates (κ = 0.38) and protocol 2 for thick cortical plates (κ = 0.40)., Conclusions: No consistent effect of the number of basis images or head orientation for visual detection of alveolar bone was detected, except for lingual cortical bone, for which full rotation scanning showed improved visualization., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Objective: The aim of this study was to assess whether cone beam computed tomography (CBCT) may be used for clinically reliable alveolar bone quality assessment in comparison to its clinical alternatives, multislice computed tomography and the gold standard (micro-CT)., Materials and Methods: Six dentate mandibular bone samples were scanned with seven CBCT devices (ProMax 3D Max, NewTom GiANO, Cranex 3D, 3D Accuitomo 170, Carestream 9300, Scanora 3D, I-CAT Next generation), one micro-CT scanner (SkyScan 1174) and one MSCT machine (Somatom Definition Flash) using two protocols (standard and high-resolution). MSCT and CBCT images were automatically spatially aligned on the micro-CT scan of the corresponding sample. A volume of interest was manually delineated on the micro-CT image and overlaid on the other scanning devices. Alveolar bone structures were automatically extracted using the adaptive thresholding algorithm. Based on the resulting binary images, an automatic 3D morphometric quantification was performed in a CT-Analyser (Bruker, Kontich, Belgium). The reliability and measurement errors were calculated for each modality compared to the gold standard micro-CT., Results: Both MSCT and CBCT were associated with a clinically and statistically (P <0.05) significant measurement error. Bone quantity-related morphometric indices (bone volume fraction 8.41% min to 17.90% max, bone surface density -0.47 mm-1 min to 0.16 mm-1 max and trabecular thickness 0.15 mm min to 0.31 mm max) were significantly (P <0.05) overestimated, resulting in significantly (P <0.05) closer trabecular pores (total porosity percentage -8.41% min to -17.90% max and fractal dimension 0.08 min to 0.17 max) in all scanners compared to micro-CT. However, the structural pattern of the alveolar bone remained similar compared to that of the micro-CT for the ProMax 3D Max, NewTom GiANO, Cranex 3D, 3D Accuitomo 170 and Carestream 9300. On the other hand, the Scanora 3D, i-CAT Next Generation, standard and high-resolution MSCT displayed an overrated bone quantity and aberrant structural pattern compared to other scanning devices. The calculation of morphometric indices had an overall high reliability (intraclass correlation coefficient [ICC] 0.62 min to 0.99 max), except for the i-CAT Next Generation CBCT (ICC 0.26 min to 0.86 max) and standard resolution MSCT (ICC 0.10 min to 0.62 max)., Conclusions: This study demonstrated that most CBCT machines may be able to quantitatively assess alveolar bone quality, with a level of accuracy and reliability that approaches micro-CT. One may therefore propose to extrapolate this to clinical CBCT imaging, certainly when there is a need for implant rehabilitation in dentate jaw bones. Conflict-of-interest statement: There is no conflict of interest to declare., Funding: Fellowship support was received from Research Foundation Flanders (FWO) from the Belgian government and from the Coordination for the Improvement of Higher Education Personnel (CAPES) programme, Science without Borders, from the Brazilian government.

Objectives: To develop a novel 3D landmark reference system that is specific for mandibular midline cephalometric landmarks and to assess its repeatability and reproducibility., Methods: Cone-beam computed tomography (CBCT) scans (3D Accuitomo® 170) were performed on 26 dry human skulls. The CBCT data were exported into DICOM files and imported to Maxilim® software to create 3D surface models. Two observers identified five landmarks to create a specific mid-sagittal mandibular plane: two mandibular foramina, two molar landmarks and one interincisive landmark. On this mid-sagittal mandibular plane, four mandibular cephalometric landmarks were marked: Point B, Pogonion, Gnathion and Menton. All observations were repeated by the two observers after an interval of 4 weeks. The coordinates (x, y, z) of each landmark were exported, and statistical analyses were performed to evaluate inter- and intra-rater precision., Results: The intra-observer median precision in locating all landmarks ranged between 0.17 and 0.61mm. The intra-observer repeatability was generally good with a precision under 1mm in more than 50 per cent. The overall median inter-observer precision was 0.26-2.30mm. The mandibular foramina showed the best inter-observer reproducibility. The general inter-observer reproducibility was moderate to good, except for Pogonion and Point B., Limitations: Dry human skulls may not represent anatomical conditions found in living patients, thus the system should be validated using patients' data., Conclusion: The novel reference system offered good precision and generally good to moderate repeatability and reproducibility for mandibular midline cephalometric landmark identification in three dimensions. These findings will be useful for further improvement of 3D cephalometric systems., (© The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Purpose: To determine the accuracy of the latest cone beam computed tomography (CBCT) machines in comparison to multi-slice computer tomography (MSCT) and micro computed tomography (micro-CT) for objectively assessing trabecular and cortical bone quality prior to implant placement., Materials and Methods: Eight edentulous human mandibular bone samples were scanned with seven CBCT scanners (3D Accuitomo 170, i-CAT Next Generation, ProMax 3D Max, Scanora 3D, Cranex 3D, Newtom GiANO and Carestream 9300) and one MSCT system (Somatom Definition Flash) using the clinical exposure protocol with the highest resolution. Micro-CT (SkyScan 1174) images served as a gold standard. A volume of interest (VOI) comprising trabecular and cortical bone only was delineated on the micro-CT. After spatial alignment of all scan types, micro-CT VOIs were overlaid on the CBCT and MSCT images. Segmentation was applied and morphometric parameters were calculated for each scanner. CBCT and MSCT morphometric parameters were compared with micro-CT using mixed-effect models. Intraclass correlation analysis was used to grade the accuracy of each scanner in assessing trabecular and cortical quality in comparison with the gold standard. Bone structure patterns of each scanner were compared with micro-CT in 2D and 3D to facilitate the interpretation of the morphometric analysis., Results: Morphometric analysis showed an overestimation of the cortical and trabecular bone quantity during CBCT and MSCT evaluation compared to the gold standard micro-CT. The trabecular thickness (Tb.Th) was found to be significantly (P < 0.05) different and the smallest overestimation was found for the ProMax 3D Max (180 µm), followed by the 3D Accuitomo 170 (200 µm), Carestream 9300 (220 µm), Newtom GiANO (240 µm), Cranex 3D (280 µm), Scanora 3D (300 µm), high resolution MSCT (310 µm), i-CAT Next Generation (430 µm) and standard resolution MSCT (510 µm). The underestimation of the cortical thickness (Ct.Th) in ProMax 3D Max (-10 µm), the overestimation in Newtom GiANO (10 µm) and the high resolution MSCT (10 µm) were neglible. However, a significant overestimation (P < 0.05) was found for 3D Accuitomo 170 (110 µm), Scanora 3D (140 µm), standard resolution MSCT (150 µm), Carestream 9300 (190 µm), Cranex 3D (190 µm) and i-CAT Next Generation (230 µm). Comparison of the 2D network and 3D surface distance confirmed the overestimation in bone quantity, but only demonstrated a deviant trabecular network for the i-CAT Next Generation and the standard resolution MSCT. Intraclass correlation coefficients (ICCs) showed a significant (P < 0.05) high intra-observer reliability (ICC > 0.70) in morphometric evaluation between micro-CT and commercially available CBCT scanners (3D Accuitomo 170, Newtom GiANO and ProMax 3D Max). The ICC for Tb.Th and Ct.Th were 0.72 and 0.98 (3D Accuitomo 170), 0.71 and 0.96 (Newtom GiANO), and 0.87 and 0.92 (ProMax 3D Max), respectively., Conclusions: High resolution CBCT offers a clinical alternative to MSCT to objectively determine the bone quality prior to implant placement. However, not all tested CBCT machines have sufficient resolution to accurately depict the trabecular network or cortical bone. Conflict-of-interest statement: There is no conflict of interest to declare., Funding: Fellowship support came from Research Foundation Flanders (FWO) from the Belgian government, and Coordination for the Improvement of Higher Education Personnel (CAPES) program and Science without borders from the Brazilian government.

Background: The aim of this study was to evaluate the accuracy of linear measurements on three imaging modalities: lateral cephalograms from a cephalometric machine with a 3 m source-to-mid-sagittal-plane distance (SMD), from a machine with 1.5 m SMD and 3D models from cone-beam computed tomography (CBCT) data., Methods: Twenty-one dry human skulls were used. Lateral cephalograms were taken, using two cephalometric devices: one with a 3 m SMD and one with a 1.5 m SMD. CBCT scans were taken by 3D Accuitomo® 170, and 3D surface models were created in Maxilim® software. Thirteen linear measurements were completed twice by two observers with a 4 week interval. Direct physical measurements by a digital calliper were defined as the gold standard. Statistical analysis was performed., Results: Nasion-Point A was significantly different from the gold standard in all methods. More statistically significant differences were found on the measurements of the 3 m SMD cephalograms in comparison to the other methods. Intra- and inter-observer agreement based on 3D measurements was slightly better than others., Limitations: Dry human skulls without soft tissues were used. Therefore, the results have to be interpreted with caution, as they do not fully represent clinical conditions., Conclusions: 3D measurements resulted in a better observer agreement. The accuracy of the measurements based on CBCT and 1.5 m SMD cephalogram was better than a 3 m SMD cephalogram. These findings demonstrated the linear measurements accuracy and reliability of 3D measurements based on CBCT data when compared to 2D techniques. Future studies should focus on the implementation of 3D cephalometry in clinical practice., (© The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Purpose: To develop a method for characterizing trabecular bone microarchitecture using cone beam computed tomography (CBCT) and to evaluate trabecular bone changes after rehabilitation using immediate versus delayed implant protocols., Materials and Methods: Six mongrel dogs randomly received 27 titanium implants in the maxillary incisor or mandibular premolar areas, following one of four protocols: (1) normal extraction socket healing; (2) immediate implant placement and immediate loading; (3) delayed implant placement and delayed loading; (4) delayed implant placement and immediate loading. The animals were euthanized at 8 weeks, and block biopsies were scanned using high resolution CBCT. Standard bone structural variables were assessed in coronal, middle, and apical levels., Results: Coronal and middle regions had more compact, more platelike, and thicker trabeculae. Protocols (2), (3), and (4) had significantly higher values (p < 0.001) than protocol (1) for bone surface density, bone surface volume ratio, and connectivity density, while significantly lower values (p < 0.001) were found for trabecular separation and fractal dimension. However, protocols (2), (3), and (4) did not show significantly different bone remodeling., Conclusions: Compared with normal extraction healing, the implant protocols have an improved bone structural integration. Results do not suggest a different bone remodeling pattern when a delayed versus an immediate implant protocol is used., (© 2013 Wiley Periodicals, Inc.)

Purpose: To provide more information to clinicians planning sinus grafting and maxillofacial surgical interventions, the present study evaluated the prevalence, diameter and location of the superior alveolar canals (SAC) using CBCT images., Methods: The maxillary sinus CBCT scans (i-CAT Classic(®), ISI, USA) of 100 adult patients (67 women and 33 men) aged 20-79 years [mean (SD) 40 (15)] were examined. A dentomaxillofacial radiologist observed the SAC based on CBCT image data and more specifically the parasagittal views to assess SAC's diameter and location., Results: The anterior and posterior SAC, double ASAC, intraosseous anastomoses and the extension of the anterior SAC to the piriform aperture were observed in 100, 73, 24.5, 38.5 and 84 % of the cases, respectively. The anastomosis was located between canine and first premolar in 43 % of the cases. The SAC diameters were in 80 % of the cases ≤1 mm, remaining canals had a diameter between 1 and 2 mm. The distance of the SAC to the alveolar crest ranged between 2.42 and 44.6 mm. The anterior SAC was more prevalent in the upper (53 %) and middle (44 %) thirds of the maxillary sinus, while the posterior SAC was more prevalent in the middle (36 %) and lower thirds (64 %). The distance was significantly bigger in men in some tooth positions., Conclusions: Based on the present findings, one-fifth of the patients may have a diameter of the SAC >1 mm, large enough to cause bleeding and/or paraesthesia. CBCT imaging may assist surgeons to plan grafting and osteotomy procedures, while avoiding these neurovascular structures.

Some anatomic patterns formed by the anterior border of the ascending ramus relative to the mandibular canal can cause nerve complications during surgery. We determined the frequency of obstructive anatomy in patients undergoing jaw surgery, and we described a perioperative method for a bilateral sagittal split osteotomy that ensured inferior alveolar nerve (IAN) protection. The anatomy of the anterior border of the ascending ramus of the mandible was examined on axial and cross-sectional cone beam computed tomographic images of 114 consecutive patients undergoing bilateral sagittal split osteotomies. The thickness of the anterior border of the ascending ramus determined whether the mandibular foramen could be visualized (pattern A) or was obscured (pattern B). Patients with pattern B anatomy received a perioperative procedure. Direct visualization of the mandibular foramen was achieved in 100% of patients with pattern A anatomy. We examined 228 anterior borders of the ascending ramus of the mandible relative to the mandibular foramen in 114 patients. Pattern A was observed in 146 cases (64%); pattern B, in 82 (36%) cases. The use of the nerve hook resulted in no injuries to the IAN in all cases. The described procedure ensured direct visualization of the IAN, which prevented inadvertent damage to the IAN during instrumentation and surgical procedures at the mandibular foramen.

Objective: To compare the outcome of cone beam computed tomography (CBCT)-based surgical planning and transfer technique for tooth autotransplantation versus conventional autotransplantation., Study Design: The study material comprised 40 pediatric subjects in whom 48 teeth were transplanted following a case-control design. While the study group (mean age 11 years) underwent CBCT imaging for surgical planning and transfer via stereolithographic tooth replica fabrication, the historical control group (mean age 12 years) was subjected to conventional autotransplantation., Results: The CBCT-based preoperative planning and the use of a tooth replica decreased the extra-alveolar time and reduced the number of positioning trials with the donor tooth. In the control group, 6 patients showed 1 or more complications, while this was noticed for only 2 study patients., Conclusion: CBCT-based surgical planning of tooth autotransplantation may benefit from a shorter surgical time, while being a less invasive technique, causing fewer failures than a conventional approach., (Copyright © 2013 Elsevier Inc. All rights reserved.)

Aims: To compare image quality and visibility of anatomical structures in the mandible between five Cone Beam Computed Tomography (CBCT) scanners and one Multi-Slice CT (MSCT) system., Materials and Methods: One dry mandible was scanned with five CBCT scanners (Accuitomo 3D, i-CAT, NewTom 3G, Galileos, Scanora 3D) and one MSCT system (Somatom Sensation 16) using 13 different scan protocols. Visibility of 11 anatomical structures and overall image noise were compared between CBCT and MSCT. Five independent observers reviewed the CBCT and the MSCT images in the three orthographic planes (axial, sagittal and coronal) and assessed image quality on a five-point scale., Results: Significant differences were found in the visibility of the different anatomical structures and image noise level between MSCT and CBCT and among the five CBCT systems (p=0.0001). Delicate structures such as trabecular bone and periodontal ligament were significantly less visible and more variable among the systems in comparison with other anatomical structures (p=0.0001). Visibility of relatively large structures such as mandibular canal and mental foramen was satisfactory for all devices. The Accuitomo system was superior to MSCT and all other CBCT systems in depicting anatomical structures while MSCT was superior to all other CBCT systems in terms of reduced image noise., Conclusions: CBCT image quality is comparable or even superior to MSCT even though some variability exists among the different CBCT systems in depicting delicate structures. Considering the low radiation dose and high-resolution imaging, CBCT could be beneficial for dentomaxillofacial radiology., (Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.)

Aim: The study aim was to compare the geometric accuracy of three-dimensional (3D) surface model reconstructions between five Cone Beam Computed Tomography (CBCT) scanners and one Multi-Slice CT (MSCT) system., Materials and Methods: A dry human mandible was scanned with five CBCT systems (NewTom 3G, Accuitomo 3D, i-CAT, Galileos, Scanora 3D) and one MSCT scanner (Somatom Sensation 16). A 3D surface bone model was created from the six systems. The reference (gold standard) 3D model was obtained with a high resolution laser surface scanner. The 3D models from the five systems were compared with the gold standard using a point-based rigid registration algorithm., Results: The mean deviation from the gold standard for MSCT was 0.137 mm and for CBCT were 0.282, 0.225, 0.165, 0.386 and 0.206 mm for the i-CAT, Accuitomo, NewTom, Scanora and Galileos, respectively., Conclusion: The results show that the accuracy of CBCT 3D surface model reconstructions is somewhat lower but acceptable comparing to MSCT from the gold standard., (Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.)

Abstract Introduction Regenerative endodontic procedures (REP) are a novel treatment modality to restore the function of necrotic pulp tissue via stimulation or transplantation of stem cells into the root canal. This study aimed to investigate the immunohistologic outcome of 3 extracted teeth because of sequelae of trauma and unsatisfactory REP outcomes. Methods Three immature permanent maxillary central incisors of 3 female patients (6–9 years) were extracted 5.5–22 months after REP. Additionally, 1 sound permanent immature central maxillary incisor of 1 of the included patients was extracted for orthodontic reasons. The teeth were immunohistologically stained with Masson's trichrome, neurofilament (NF), pan cytokeratin, dentin sialophosphoprotein, and Gram+/-. Results The REP-teeth presented intracanalar vascularized connective/mineralized reparative tissue (RT), which was less organized than the pulp tissue of the sound tooth. Moderate to considerable calcification was observed below the Portland cement used during REP. In 1 case, the RT was NF+; in the 2 other cases, the periodontal ligament and apical granuloma/papilla were NF+. All teeth were Gram+/- negative; nevertheless, inflammatory cells were present in 2 cases. The pan cytokeratin and dentin sialophosphoprotein stainings were not specific enough for 2 cases. Conclusions This immunohistologic study of failed REP cases resulted in bacteria-free intracanalar RT and biomaterial-induced calcification. Nevertheless, the presence of inflammatory cells revealed a persistent inflammation. Hence, the clinical and radiographic signs were decisive for tooth survival and multidisciplinary outcome determination. [ABSTRACT FROM AUTHOR]