Search

The atomic-level structure of interfaces between Pt and a transition form of Al2O3 were studied using a combination of electron microscopy and first principles calculations. A model system of Pt nanoprecipitates in Al2O3 were formed in sapphire wafers via high-energy ion implantation of Pt followed by thermal annealing at 1000 °C in air. The Pt nanoparticles took the form of tetrahedra and truncated tetrahedra primarily bound by {111}Pt facets. The high prevalence of these facets motivated the development of density functional theory (DFT) based models of (111)Pt interfaces with six different chemical terminations of (2¯01) θ-alumina. The atomic-level structure of the Pt/Al2O3 interfaces was characterized with aberration-corrected scanning transmission electron microscopy (STEM) and the experimental images were compared to STEM image simulations of the DFT models. The model interface with Pt bonded to oxygen-terminated θ-Al2O3, with the Pt located on top of the O and with an underlying layer of octahedral Al, provided the best match to the experimental images. This interfacial termination is also the most stable for the thermal annealing conditions used based on thermodynamic calculations of the interfacial energy as a function of temperature and oxygen partial pressure. This experimentally verified model provides a basis for improving models of Pt/γ-alumina interfaces.

The atomic-level structure of platinum/γ-alumina interfaces is characterized in a model system of dense γ-alumina embedded with faceted Pt NPs produced by implantation of platinum ions into sapphire followed by thermal annealing in air at 800 °C. Aberration-corrected scanning transmission electron microscopy (STEM) was used to collect atomic-resolution images, which are compared to STEM image simulations of two experimentally-based bulk models of γ-alumina by Smrčok et al. and Zhou and Snyder. A density functional theory (DFT) based model of (111) interfaces with different chemical terminations (O, Al1, Al2) of the γ-alumina developed by Oware Sarfo et al. is also compared to experimental STEM data from Pt/γ-alumina interfaces. The Smrčok γ-alumina model provides a better fit than the Zhou structure to the bulk of the γ-alumina. The oxygen-terminated Oware Sarfo model best fits the experimental data and is a very good model close to the interface. However, the fit of the interface model to the experimental data is poorer beyond the third atomic layer in the γ-alumina. This is attributed to compromises required in the design of the model to limit the cell size and computational time for DFT calculations. Understanding the accuracy and limits of the structural models of γ-alumina and Pt/γ-alumina interfaces is important to further the understanding of the structure/property relationships in this system.

Nanostructured ferritic alloys (NFAs) contain an ultra-high density of 2–4 nm fcc pyrochlore Y2Ti2O7 nano-oxides (NOs) embedded in a bcc Fe-14Cr ferritic matrix. Characterization of helium interactions with NOs and associated Fe-Y2Ti2O7 interfaces is important to the development of structural materials for nuclear fusion and fission applications. A benchmark 14YWT NFA was first annealed to coarsen the NOs, then insoluble helium was implanted at 700 °C to produce a high number density of bubbles. High-resolution scanning transmission electron microscopy characterization shows two dominant Fe-Y2Ti2O7 crystallographic orientation relationships (cube-on-edge and cube-on-cube). The smallest NOs (≈ 2 nm) are associated with the smaller bubbles (≈ 1.5 nm), while some of the largest NOs (> 6 nm) have larger, and sometimes multiple, bubbles. NO corner {111} facets are the preferred sites for He bubble nucleation. A refined sequence of events for He trapping and bubble formation is presented. These observations offer new insight on He management in NFAs, and provide a foundation for detailed modeling studies.

Large superelastic deformation in ferroelastic-ferroelectrics (FMs) is a complex phenomenon involving multiple mechanisms operating simultaneously. Understanding how these mechanisms contribute corporately is critical to apply this useful property to the intrinsically brittle FMs, which can therefore display both excellent functional and mechanical performance. Here, we have directly observed and quantitatively analyzed in situ in a transmission electron microscope the three main mechanisms of twinning domain, phase transformation and mobile point defect contributing to extremely large superelastic deformation in single-crystal BaTiO3 (5.0% strain) and Pb(Mg1/3Nb2/3)O3-PbTiO3 (10.1% strain). Our results reveal the hierarchical origin of large recoverable strain in “brittle” FMs.

Control of structural coupling at complex-oxide interfaces is a powerful platform for creating ultrathin layers with electronic and magnetic properties unattainable in the bulk. However, with the capability to design and control the electronic structure of such buried layers and interfaces at a unit-cell level, a new challenge emerges to be able to probe these engineered emergent phenomena with depth-dependent atomic resolution as well as element- and orbital selectivity. Here, we utilize a combination of core-level and valence-band soft x-ray standing-wave photoemission spectroscopy, in conjunction with scanning transmission electron microscopy, to probe the depth-dependent and single-unit-cell resolved electronic structure of an isovalent manganite superlattice [Eu0.7Sr0.3MnO3/La0.7Sr0.3MnO3]×15 wherein the electronic-structural properties are intentionally modulated with depth via engineered oxygen octahedra rotations/tilts and A-site displacements. Our unit-cell resolved measurements reveal significant transformations in the local chemical and electronic valence-band states, which are consistent with the layer-resolved first-principles theoretical calculations, thus opening the door for future depth-resolved studies of a wide variety of heteroengineered material systems.

The projected electrostatic potential of a thick crystal is reconstructed at atomic resolution from experimental scanning transmission electron microscopy data recorded using a new generation fast-readout electron camera. This practical and deterministic inversion of the equations encapsulating multiple scattering that were written down by Bethe in 1928 removes the restriction of established methods to ultrathin (≲50  Å) samples. Instruments already coming on line can overcome the remaining resolution-limiting effects in this method due to finite probe-forming aperture size, spatial incoherence, and residual lens aberrations.

Rational design of low-dimensional electronic phenomena at oxide interfaces is currently considered to be one of the most promising schemes for realizing new energy-efficient logic and memory devices. An atomically abrupt interface between paramagnetic LaNiO3 and antiferromagnetic CaMnO3 exhibits interfacial ferromagnetism, which can be tuned via a thickness-dependent metal-insulator transition in LaNiO3. Once fully understood, such emergent functionality could turn this archetypal Mott-interface system into a key building block for the above-mentioned future devices. Here, we use depth-resolved standing-wave photoemission spectroscopy in conjunction with scanning transmission electron microscopy and x-ray absorption spectroscopy, to demonstrate a depth-dependent charge reconstruction at the LaNiO3/CaMnO3 interface. Our measurements reveal an increased concentration of Mn3+ and Ni2+ cations at the interface, which create an electronic environment favorable for the emergence of interfacial ferromagnetism mediated via the Mn4+-Mn3+ ferromagnetic double exchange and Ni2+-O-Mn4+ superexchange mechanisms. Our findings suggest a strategy for designing functional Mott oxide heterostructures by tuning the interfacial cation characteristics via controlled manipulation of thickness, strain, and ionic defect states.

Nanobeam electron diffraction strain mapping has been used to measure the strain evolution in stainless steel under in situ deformation. As the amount of deformation increases, the leading dislocation of a planar slip band leaves behind a residual strain in the form of a small lattice expansion. Dislocation analysis confirmed that the dislocations involved were type. While the characteristic residual strain of planar slip has often been observed, it has never before been directly measured. Our results provide a view into the dynamic mechanisms of planar slip, and showcase the possibilities of multidimensional in situ imaging.

The nature of the metal-insulator transition in thin films and superlattices of LaNiO3 only a few unit cells in thickness remains elusive despite tremendous effort. Quantum confinement and epitaxial strain have been evoked as the mechanisms, although other factors such as growth-induced disorder, cation non-stoichiometry, oxygen vacancies, and substrate-film interface quality may also affect the observable properties of ultrathin films. Here we report results obtained for near-ideal LaNiO3 films with different thicknesses and terminations grown by atomic layer-by-layer laser molecular beam epitaxy on LaAlO3 substrates. We find that the room-temperature metallic behavior persists until the film thickness is reduced to an unprecedentedly small 1.5 unit cells (NiO2 termination). Electronic structure measurements using X-ray absorption spectroscopy and first-principles calculation suggest that oxygen vacancies existing in the films also contribute to the metal-insulator transition.

Four-dimensional scanning transmission electron microscopy (4D-STEM) is a technique where a full two-dimensional convergent beam electron diffraction (CBED) pattern is acquired at every STEM pixel scanned. Capturing the full diffraction pattern provides a rich dataset that potentially contains more information about the specimen than is contained in conventional imaging modes using conventional integrating detectors. Using 4D datasets in STEM from two specimens, monolayer MoS2 and bulk SrTiO3, we demonstrate multiple STEM imaging modes on a quantitative absolute intensity scale, including phase reconstruction of the transmission function via differential phase contrast imaging. Practical issues about sampling (i.e. number of detector pixels), signal-to-noise enhancement and data reduction of large 4D-STEM datasets are emphasized.

The capability of nanostructured ferritic alloys (NFAs) to manage high levels of transmutation product helium will help resolve one of the grand challenges to transforming the promise of C-free fusion energy into a reality. NFAs are dispersion strengthened by an ultrahigh density of Y-Ti-O nano-oxides (NOs), which result in both high strength and temperature limits, as well as unique irradiation tolerance. Here, aberration-corrected high-resolution transmission electron microscopy was used to characterize the NOs in four NFA conditions, including following severe deformation and extreme neutron radiation exposure. Fast Fourier Transform analysis of focal series images revealed the NO crystal structure, including the smallest at < 2 nm in diameter, to be Y2Ti2O7 pyrochlore in all cases, consistent with both exit wave analysis and scanning transmission Z-contrast imaging of the atomic columns in a larger feature. The faceted NOs exhibit a quasi-epitaxial orientation relationship with the ferrite matrix: [110]YTO||[100]Fe and [001]YTO||[010]Fe, forming a 5 × 7 near coincidence site interface. The NOs also exhibit size-dependent strains in both the oxide and matrix ferrite phases.