Search

The bulk micro-machining technique is commonly applied to fabricate the silicon micro-cantilever beam. With a micro-probe and special designed fixtures a micro-force testing machine can effectively apply mechanical loading on the beams by bending. This paper is thus aimed at studying the mechanical behavior of single crystal silicon (SCS) micro-cantilever beams by the specific method. The focus is at elucidating failure mechanisms of bent beams since limited studies have been conducted concerning its impact on reliability evaluation. We have fabricated various types of samples that have different lengths and thickness. With various beams in micro-scale, not only the stress–strain relationship can be achieved, but dimension effects on flexural strength, Young’s modulus, and failure strain of MEMS devices can also be precisely evaluated. In addition, locations and failure modes of bent beams are detected by SEM. Based on the microscopic analysis, failure mechanisms are determined for various beams. For reliability analysis purposes it is crucial to determine the location and cause of failure. Data on strength and failure strain as found in the study can be very important for reliability evaluation of SCS such as fatigue life. The testing method can also be easily extended to nano-scale specimens by adding a force magnification lever mechanism.

A novel design of the three-step Langmuir probe (TSLP) array has been developed to investigate the zonal flow (ZF) physics in the HL-2A tokamak. Three TSLP arrays are applied to measure the three-dimensional (3D) features of ZFs. They are separated by 65 mm in the poloidal and 800 mm in the toroidal directions, respectively. The 3D properties of the geodesic acoustic mode (GAM) ZFs are presented. The poloidal and toroidal modes of the radial electric fields of the GAM perturbations are simultaneously determined in the HL-2A tokamak for the first time. The modes have narrow radial wave numbers (kr ρi = 0.03–0.07) and short radial scale lengths (2.4–4.2 cm). High coherence of both the GAM and the ambient turbulence separated by toroidal 22.5 ◦ along a magnetic field line is observed, which contrasts with the high coherence of the GAM and the low coherence of the ambient turbulence apart from the field line. The nonlinear three wave coupling between the turbulent fluctuations and the ZFs is a plausible mechanism for flow generation. The skewness and kurtosis spectra of the probability distribution function of the potential perturbations are contrasted with the corresponding bicoherence for the first time, which support the three wave coupling mechanism.

Recent experiment results from the HL-2A tokamak are presented in this paper. Supersonic molecular beam injection (SMBI) with liquid nitrogen temperature propellant is used. Low temperature SMBI can form hydrogen clusters that penetrate into the plasma more deeply and efficiently. Particle diffusion coefficient and convection velocity (D = 0.5?1.5?m2?s?1 and Vconv < 40?m?s?1, respectively) are obtained at the plasma periphery using modulated SMBI. Multi-probe measurements reveal the m = 0?1, n = 0 symmetries of directly measured low frequency (7?9?kHz) electric potential and field are simultaneously observed for the first time. Impurity transport is determined with the laser blow-off system and transport code. A disruption predictor has been derived based on MHD activity observations and statistical analysis. Sawtooth characteristics during ECRH are investigated and coupling between m = 1 and m/n = 2/1 modes is studied. Detachment features of HL-2A divertor are numerically and experimentally studied using the code SOLPS5.0 and measured data. The long divertor legs and thin divertor throats in HL-2A pose MHD shaping problems resulting in momentum losses even at low densities and strongly enhanced main chamber losses.

Two experiment campaigns were conducted on the HL-2A tokamak in 2003 and 2004 after the first plasma was obtained at the end of 2002. Progresses in many aspects have been made, especially in the divertor discharge and feedback control of plasma configuration. Up to now, the following operation parameters have been achieved: Ip = 320 kA, Bt = 2.2 T and discharge duration Td = 1580 ms. With the feedback control of plasma current and horizontal position, an excellent repeatability of the discharge has been achieved. The tokamak has been operated at both limiter configuration and single null (SN) divertor configuration. The HL-2A SN divertor configuration is simulated with the MHD equilibrium code SWEQU. When the divertor configuration is formed, the impurity radiation in the main plasma decreases remarkably.

Recent experimental results from the HL-1M tokamak and progress in the HL-2A project are presented in this paper. In HL-1M, strong fishbone instability was observed during off-axis electron cyclotron resonance heating (ECRH). This is the first observation of fishbone instability purely driven by energetic electrons produced by ECRH. The molecular beam injection (MBI) was first proposed and demonstrated in HL-1M. Recently, new results of the MBI experiment were obtained by increasing the pressure of the gas. A stair-shaped density increment was obtained with high-pressure multi-pulse MBI just like the density evolution behaviour during multi-pellet injection. It is shown that injected particles penetrated into the core region of the plasma. HL-2A is a divertor tokamak constructed at SWIP based on the original ASDEX main components. The mission of the HL-2A project is to explore the physics issues involved in an advanced tokamak. For the first phase, divertor (edge plasma) and confinement research will be emphasized. The major parameters of HL-2A are R = 1.65 m, a = 0.4 m, Bt = 2.8 T, IP = 0.48 MA. The main parameters and characteristics of the subsystems such as power supply, pumping, diagnostics and auxiliary heating are presented in this paper. The first plasma of HL-2A was obtained at the end of 2002.

The physics experiments on the HL-2A tokamak have been focused on confinement improvement, particle and thermal transport, zonal flow and turbulence, filament characteristics, energetic particle induced modes and plasma fuelling efficiency since 2008. ELMy H-mode discharges are achieved in a lower density regime using a combination of NBI heating with ECRH. The power threshold is found to increase with a decrease in density, almost independent of the launching order of the ECRH and NBI heating power. The pedestal density profiles in the H-mode discharges are measured. The particle outward convection is observed during the pump-out transient phase with ECRH. The negative density perturbation (pump-out) is observed to propagate much faster than the positive one caused by out-gassing. The core electron thermal transport reduction triggered by far off-axis ECRH switch-off is investigated. The coexistence of low frequency zonal flow (LFZF) and geodesic acoustic mode (GAM) is observed. The dependence of the intensities of LFZFs and GAMs on the safety factor and ECRH power is identified. The 3D spatial structures of plasma filaments are measured in the boundary plasma and large-scale structures along a magnetic field line analysed for the first time. The beta-induced Alfvén eigenmodes (BAEs), excited by large magnetic islands (m-BAE) and by energetic electrons (e-BAE), are observed. The results for the study of fuelling efficiency and penetration characteristics of supersonic molecular beam injection (SMBI) are described.

Significant experimental advances have been made on the HL-2A tokamak along with substantial improvement and development of the hardware. A spontaneous particle transport barrier has been observed in Ohmic discharges without any external momentum input. The barrier was evidenced by a density perturbation study using modulated supersonic molecular beam injection (SMBI) and microwave reflectometry. The new features of the non-local transport effect induced with SMBI have been analysed. The three-dimensional spectral structures of the low frequency zonal flow, the geodesic acoustic mode (GAM) and the quasi-mode-like low frequency fluctuations have been observed simultaneously for the first time. In addition, the spectral structure of the density fluctuations of GAM was also identified. The e-fishbone instability excited by energetic electrons deviated from Maxwellian distribution has been investigated via a 10-channel CdTe hard x-ray detector. It was found that the e-fishbone was correlated with the existence of energetic electrons of 30–70 keV. The MHD experiment has indicated that the suppression of m/n = 2/1 tearing modes may be sustained by ECRH modulation at a frequency of about 10 Hz.