Search

The discovery of the topological states has become a key topic in condensed matter physics with the focus evolving from the Dirac or Weyl points to high-dimension topological states of the nodal lines and nodal surfaces. For a topological material to manifest its quantum properties and become useful in applications, the topological states need to be genuine and clean so that they lie close to the Fermi level without other trivial bands existing at the Fermi level. While a number of high-dimension topological materials are predicted, only a few of them have been synthesized and confirmed and the genuine and clean ones are especially scarce. Here we report the realization of the genuine clean multiple high-dimension topological states in NaAlSi. By performing high-resolution angle-resolved photoemission measurements and band structure calculations, we have observed two sets of nodal surfaces and the formation of two homocentric nodal ring states in NaAlSi. The observed nodal rings are distinct in that the inner one is a type-{\uppercase\expandafter{\romannumeral1}} nodal ring while the outer one is a type-{\uppercase\expandafter{\romannumeral1}} nodal ring embedded with four type-{\uppercase\expandafter{\romannumeral3}} nodal points. All the bands involved in the nodal rings lie very close to the Fermi level with no other trivial bands coexisting at the Fermi level. These observations make NaAlSi a desirable topological material to explore for novel quantum states and exotic properties.

The superconductor SnTaS$_{2}$ is theoretically predicted to be an intriguing topological nodal line semimetal without consideration of spin-orbit coupling. By carrying out angle-resolved photoemission (ARPES) and spin-resolved ARPES measurements combined with band structure calculations, we have provided a complete picture of the electronic structure and spin polarization property for the prominent surface states of SnTaS$_{2}$. The low-energy electronic states are dominated by surface states; two of them are from the S-terminated surface, while four of them are from the Sn-terminated surface. These give rise to interesting Fermi surface topology of SnTaS$_{2}$: three pockets located at $\bar\Gamma$, $\bar{M}$ and $\bar{K}$ for the S-terminated surface and two pockets surrounding $\bar\Gamma$ and $\bar{K}$ for the Sn-terminated surface. We further reveal that two surface states that cross the Fermi level are spin-polarized. Since SnTaS$_{2}$ is also a superconductor, our observations indicate that it may provide a new platform to explore topological superconductivity and other exotic properties.

The pseudogap state is one of the most enigmatic characteristics in the anomalous normal state properties of the high temperature cuprate superconductors. A central issue is to reveal whether there is a symmetry breaking and which symmetries are broken across the pseudogap transition. By performing high resolution laser-based angle-resolved photoemission measurements on the optimally-doped Bi2Sr1.6La0.4CuO6+{\delta} superconductor, we report the observations of the particle-hole symmetry conservation in both the superconducting state and the pseudogap state along the entire Fermi surface. These results provide key insights in understanding the nature of the pseudogap and its relation with high temperature superconductivity.

In conventional superconductors, the electron-phonon coupling plays a dominant role in pairing the electrons and generating superconductivity. In high temperature cuprate superconductors, the existence of the electron coupling with phonons and other boson modes and its role in producing high temperature superconductivity remain unclear. The evidence of the electron-boson coupling mainly comes from the angle-resolved photoemission (ARPES) observations of the ~70meV nodal dispersion kink and the ~40meV antinodal kink. However, the reported results are sporadic and the nature of the involved bosons are still under debate. Here we report new findings of ubiquitous two coexisting electron-mode couplings in cuprate superconductors. By taking ultra-high resolution laser-based ARPES measurements, combined with the improved second derivative analysis method, we discovered that the electrons are coupled simultaneously with two sharp phonon modes with energies of ~70meV and ~40meV in different superconductors with different doping levels, over the entire momentum space and at different temperatures above and below the superconducting transition temperature. The observed electron-phonon couplings are unusual because the associated energy scales do not exhibit an obvious change across the superconducting transition. We further find that the well-known "peak-dip-hump" structure, which has long been considered as a hallmark of superconductivity, is also omnipresent and consists of finer structures that originates from electron coupling with two sharp phonon modes. These comprehensive results provide a unified picture to reconcile all the reported observations and pinpoint the origin of the electron-mode couplings in cuprate superconductors. They provide key information to understand the role of the electron-phonon coupling in generating high temperature superconductivity.

We report the synthesis of single-crystal NbC, a transition metal carbide with various unusual properties. Transport, magnetic susceptibility, and specific heat measurements demonstrate that NbC is a conventional superconductor with a superconducting transition temperature ($T_c$) of 11.5 K. Our theoretical calculations show that NbC is a type-II Dirac semimetal with strong Fermi surface nesting, which is supported by our ARPES measurement results. We also observed the superconducting gaps of NbC using angle-resolved photoemission spectroscopy (ARPES) and found some unconventional behaviors. These intriguing superconducting and topological properties, combined with the high corrosion resistance, make NbC an ideal platform for both fundamental research and device applications., Comment: to appear in Physical Review B

High temperature superconductivity in cuprates is realized by doping the Mott insulator with charge carriers. A central issue is how such an insulating state can evolve into a conducting or superconducting state when charge carriers are introduced. Here, by in situ vacuum annealing and Rb deposition on the Bi2Sr2Ca0.6Dy0.4Cu2O8+delta (Bi2212) sample surface to push its doping level continuously from deeply underdoped (Tc=25 K, doping level p-0.066) to the near zero doping parent Mott insulator, angle-resolved photoemission spectroscopy measurements are carried out to observe the detailed electronic structure evolution in lightly hole-doped region for the first time. Our results indicate that the chemical potential lies at about 1 eV above the charge transfer band for the parent state at zero doping which is quite close to the upper Hubbard band. With increasing hole doping, the chemical potential moves continuously towards the charge transfer band and the band structure evolution exhibits a rigid band shift-like behavior. When the chemical potential approaches the charge transfer band at a doping level of -0.05, the nodal spectral weight near the Fermi level increases, followed by the emergence of the coherent quasiparticle peak and the insulator-superconductor transition. Our observations provide key insights in understanding the insulator-superconductor transition in doping the parent cuprate compound and for establishing related theories., Comment: 17 pages, 5 figures

In high temperature cuprate superconductors, the interlayer coupling between the CuO$_2$ planes plays an important role in dictating superconductivity, as indicated by the sensitive dependence of the critical temperature (T$_C$) on the number of CuO$_2$ planes in one structural unit. In Bi$_2$Sr$_2$CaCu$_2$O$_{8+\delta}$ superconductor with two CuO$_2$ planes in one structural unit, the interaction between the two CuO$_2$ planes gives rise to band splitting into two Fermi surface sheets (bilayer splitting) that have distinct superconducting gap. The iron based superconductors are composed of stacking of the FeAs/FeSe layers; whether the interlayer coupling can cause similar band splitting and its effect on superconductivity remain unclear. Here we report high resolution laser-based angle-resolved photoemission spectroscopy (ARPES) measurements on a newly discovered iron based superconductor, KCa$_2$Fe$_4$As$_4$F$_2$ (T$_C$=33.5\,K) which consists of stacking FeAs blocks with two FeAs layers separated by insulating Ca$_2$F$_2$ blocks. Bilayer splitting effect is observed for the first time that gives rise to totally five hole-like Fermi surface sheets around the Brilliouin zone center. Band structure calculations reproduce the observed bilayer splitting by identifying interlayer interorbital interaction between the two FeAs layers within one FeAs block. All the hole-like pockets around the zone center exhibit Fermi surface-dependent and nodeless superconducting gap. The gap functions with short-range antiferromagetic fluctuations are proposed and the gap symmetry can be well understood when the interlayer pairing is considered. The particularly strong interlayer pairing is observed for one of the bands. Our observations provide key information on the interlayer coupling and interlayer pairing in understanding superconductivity in iron based superconductors.

The iron-based superconductor FeSe has attracted much recent attention because of its simple crystal structure, distinct electronic structure and rich physics exhibited by itself and its derivatives. Determination of its intrinsic electronic structure is crucial to understand its physical properties and superconductivity mechanism. Both theoretical and experimental studies so far have provided a picture that FeSe consists of one hole-like Fermi surface around the Brillouin zone center in its nematic state. Here we report direct observation of two hole-like Fermi surface sheets around the Brillouin zone center, and the splitting of the associated bands, in the nematic state of FeSe by taking high resolution laser-based angle-resolved photoemission measurements. These results indicate that, in addition to nematic order and spin-orbit coupling, there is an additional order in FeSe that breaks either inversion or time reversal symmetries. The new Fermi surface topology asks for reexamination of the existing theoretical and experimental understanding of FeSe and stimulates further efforts to identify the origin of the hidden order in its nematic state.

High-resolution laser-based angle-resolved photoemission measurements have been carried out on Bi$_2$Sr$_2$CaCu$_2$O$_{8+\delta}$ (Bi2212) and Bi$_2$Sr$_{2-x}$La$_x$CuO$_{6+\delta}$ (Bi2201) superconductors. Unexpected hybridization between the main band and the superstructure band in Bi2212 is clearly revealed. In the momentum space where one main Fermi surface intersects with one superstructure Fermi surface, four bands are observed instead of two. The hybridization exists in both superconducting state and normal state, and in Bi2212 samples with different doping levels. Such a hybridization is not observed in Bi2201. This phenomenon can be understood by considering the bilayer splitting in Bi2212, the selective hybridization of two bands with peculiar combinations, and the altered matrix element effects of the hybridized bands. These observations provide strong evidence on the origin of the superstructure band which is intrinsic to the CuO$_2$ planes. Therefore, understanding physical properties and superconductivity mechanism in Bi2212 should consider the complete Fermi surface topology which involves the main bands, the superstructure bands and their interactions., Comment: 20 pages, 4 figures

High-quality Bi$_{2-x}$Pb$_{x}$Sr$_2$CaCu$_2$O$_{8+\delta}$ (Bi2212) single crystals have been successfully grown by the traveling solvent floating zone technique with a wide range of Pb substitution ($x=0-0.8$). The samples are characterized by transmission electron microscope (TEM) and measured by high resolution laser-based angle-resolved photoemission spectroscopy (ARPES) with different photon energies. A systematic evolution of the electronic structure and superstructure with Pb substitution has been revealed for the first time. The superstructure shows a significant change with Pb substitution and the incommensurate modulation vector ($\textbf{Q}$) decreases with increasing Pb substitution. In the meantime, the superstructure intensity from ARPES measurements also decreases dramatically with increasing Pb concentration. The superstructure in Bi2212 can be effectively suppressed by Pb substitution and it nearly disappears with a Pb substitution of $x=0.8$. We also find that the superstructure bands in ARPES measurements depend sensitively on the photon energy of lasers used; they can become even stronger than the main band when using a laser photon energy of 10.897 eV. These results provide important information on the origin of the incommensurate superstructure and its control and suppression in bismuth-based high temperature superconductors.

High resolution laser-based angle-resolved photoemission measurements were carried out on an overdoped $Bi_2Sr_2CaCu_2O_{8+\delta}$ superconductor with a Tc of 75 K. Two Fermi surface sheets caused by bilayer splitting are clearly identified with rather different doping levels: the bonding sheet corresponds to a doping level of 0.14 which is slightly underdoped while the antibonding sheet has a doping of 0.27 that is heavily overdoped, giving an overall doping level of 0.20 for the sample. Different superconducting gap sizes on the two Fermi surface sheets are revealed for the first time. The superconducting gap on the antibonding Fermi surface sheet follows a standard d-wave form while it deviates from the standard d-wave form for the bonding Fermi surface sheet. The maximum gap difference between the two Fermi surface sheets near the antinodal region is $\sim$2 meV. These observations provide important information for studying the relationship between the Fermi surface topology and superconductivity, and the layer-dependent superconductivity in high temperature cuprate superconductors., Comment: 19 pages, 5 figures

By partially doping Pb to effectively suppress the superstructure in single-layered cuprate Bi2Sr2CuO6+{\delta}(Pb-Bi2201) and annealing them in vacuum or in high pressure oxygen atmosphere, a series of high quality Pb-Bi2201 single crystals are obtained with Tc covering from 17 K to non-supercondcuting in the overdoped region. High resolution angle resolved photoemission spectroscopy (ARPES) measurements are carried out on these samples to investigate the evolution of the Fermi surface topology with doping in the normal state. Clear and complete Fermi surface are observed and quantitatively analyzed in all these overdoped Pb-Bi2201 samples. A Lifshitz transition from hole-like Fermi surface to electron like Fermi surface with increasing doping is observed at a doping level of ~0.35. This transition coincides with the change that the sample undergoes from superconducting to non-superconducting states. Our results reveal the emergence of an electron-like Fermi surface and the existence of a Lifshitz transition in heavily overdoped Bi2201 samples. They provide important information in understanding the connection between the disappearance of superconductivity and the Lifshitz transition in the overdoped region., Comment: 16 Pages of Text plus Figures