Search

Hot carrier effect, a phenomenon where charge carriers generated by photon absorption remain energetic by not losing much energy, has been one of the leading strategies in increasing solar cell efficiency. Nanostructuring offers an effective approach to enhance hot carrier effect via the spatial confinement, as occurring in a nanowire structure. The recent experimental study by Esmaielpour et al. [ACS Applied Nano Materials 7, 2817 (2024)] reveals a fascinating non-monotonic dependence of the hot carrier effect in nanowire array on the diameter of the nanowire, contrary to what might be expected from quantum confinement alone. We show that this non-monotonic behavior can be explained by a simple model for electron energy loss that involves two principal mechanisms. First, electron-phonon scattering, that increases with nanowire diameter, leading to hot carrier effect that decreases with increasing diameter. Second, electron capture by a defect level within band gap, that is, a midgap state, that decreases with nanowire diameter, leading to hot carrier effect that increases with increasing diameter. The two mechanisms balance at a certain diameter corresponding to optimal hot carrier effect. Our result offers a guideline to optimize hot carrier effect in nanowire solar cells and ultimately their efficiency by adjusting the dimensions and micro-structural properties of nanowires., Comment: Main text + Supplementary materials, accepted, to appear in Physical Review B Letter (2024)

InAs semiconductor quantum dots (QDs) emitting in the near infrared are promising platforms for on-demand single-photon sources and spin-photon interfaces. However, the realization of quantum-photonic nanodevices emitting in the second and third telecom windows with similar performance remains an open challenge. Here, we report an optimized heterostructure design for QDs emitting in the O- and C-bands grown by means of molecular beam epitaxy. The InAs QDs are grown on compositionally graded InGaAs buffers, which act as virtual substrates, and are embedded in mostly relaxed active regions. Reciprocal space maps of the indium profiles and optical absorption spectra are used to optimize In0.22Ga0.78As and In0.30Ga0.70As active regions, accounting for the chosen indium grading profile. This approach results in a tunable QD photoluminescence (PL) emission from 1200 up to 1600 nm. Power and polarization dependent micro-PL measurements performed at 4 K reveal exciton-biexciton complexes from quantum dots emitting in the telecom O- and C-bands. The presented study establishes a flexible platform that can be an essential component for advanced photonic devices based on InAs/GaAs that serve as building blocks for future quantum networks.

Understanding the origin of hot carrier relaxation in nanowires (NWs) with one-dimensional (1D) geometry is significant for designing efficient hot carrier solar cells with such nanostructures. Here, we study the influence of Auger heating and Shockley-Read-Hall recombination on hot carrier dynamics of catalyst-free InGaAs-InAlAs core-shell NWs. Using steady-state and time-resolved photoluminescence (PL) spectroscopy the dependencies of hot carrier effects on the degree of confinement of photo-generated carriers induced by the nanowire diameter are determined at different lattice temperatures. Analysis of excitation-power dependent data and temperature-dependent PL linewidth broadening reveal that at low temperatures, strong Auger recombination and phonon-bottleneck are responsible for hot carrier effects. Our analysis gives also insights into electron-phonon and ionized impurity scattering, showing opposing trends with NW diameter, and it allows to estimate the Fr\"ohlich coupling constant for the InGaAs NWs. Conversely, with increasing lattice temperature, hot carrier relaxation rates increase due to enhanced Shockley-Read Hall and surface recombination. Time-resolved spectroscopy reveals a fourfold increase in the rate of Shockley-Read-Hall recombination from 6 ns at 10 K to 1.5 ns at 150 K. The findings suggest that minimizing defect densities in the bulk and surfaces of these NWs will be key to enhance hot carrier effects towards higher temperatures., Comment: 15 pages, 5 figures

Nanowire lasers can be monolithically and site-selectively integrated onto silicon photonic circuits. To assess their full potential for ultrafast opto-electronic devices, a detailed understanding of their lasing dynamics is crucial. However, the roles played by their resonator geometry and the microscopic processes that mediate energy exchange between the photonic, electronic, and phononic subsystems are largely unexplored. Here, we study the dynamics of GaAs-AlGaAs core-shell nanowire lasers at cryogenic temperatures using a combined experimental and theoretical approach. Our results indicate that these NW lasers exhibit sustained intensity oscillations with frequencies ranging from 160 GHz to 260 GHz. As the underlying physical mechanism, we identified self-induced electron-hole plasma temperature oscillations resulting from a dynamic competition between photoinduced carrier heating and cooling via phonon scattering. These dynamics are intimately linked to the strong interaction between the lasing mode and the gain material, which arises from the wavelength-scale dimensions of these lasers. We anticipate that our results could lead to new approaches for ultrafast intensity and phase modulation of chip-integrated nanoscale semiconductor lasers., Comment: Revised manuscript

The authors combine acousto-optoelectric and multi-channel photon correlation spectroscopy to probe spatio-temporal carrier dynamics induced by a piezoelectric surface acoustic wave (SAW). The technique is implemented by combining phase-locked optical micro-photoluminescence spectroscopy and simultaneous three-channel time resolved detection. From the recorded time correlated single photon counting data the time transients of individual channels and the second and third order correlation functions are obtained with sub-nanosecond resolution. The method is validated by probing the correlations SAW-driven carrier dynamics between three decay channels of a single polytypic semiconductor nanowire on a conventional LiNbO$_\mathrm{3}$ SAW delay line chip. The method can be readily applied to other types of nanosystems and probe SAW-regulated charge state preparation in quantum dots, charge transfer processes in van der Waals heterostructures or other types of hybrid nanoarchitectures.

We investigate the ultrafast optoelectronic properties of single Al0.3Ga0.7As/GaAs-core-shell-nanowires. The nanowires contain GaAs-based quantum wells. For a resonant excitation of the quantum wells, we find a picosecond photocurrent which is consistent with an ultrafast lateral expansion of the photogenerated charge carriers. This Dember-effect does not occur for an excitation of the GaAs-based core of the nanowires. Instead, the core exhibits an ultrafast displacement current and a photo-thermoelectric current at the metal Schottky contacts. Our results uncover the optoelectronic dynamics in semiconductor core-shell nanowires comprising quantum wells, and they demonstrate the possibility to use the low-dimensional quantum well states therein for ultrafast photoswitches and photodetectors.

We investigate the optoelectronic properties of single indium arsenide nanowires, which are grown vertically on p-doped silicon substrates. We apply a scanning photocurrent microscopy to study the optoelectronic properties of the single heterojunctions. The measured photocurrent characteristics are consistent with an excess charge carrier transport through mid-gap trap states, which form at the Si/InAs heterojunctions. Namely, the trap states add an additional transport path across a heterojunction, and the charge of the defects changes the band bending at the junction. The bending gives rise to a photovoltaic effect at a small bias voltage. In addition, we observe a photoconductance effect within the InAs nanowires at large biases.

We probe and control the optical properties of emission centers forming in radial het- erostructure GaAs-Al0.3Ga0.7As nanowires and show that these emitters, located in Al0.3Ga0.7As layers, can exhibit quantum-dot like characteristics. We employ a radio frequency surface acoustic wave to dynamically control their emission energy and occupancy state on a nanosec- ond timescale. In the spectral oscillations we identify unambiguous signatures arising from both the mechanical and electrical component of the surface acoustic wave. In addition, differ- ent emission lines of a single quantum dot exhibit pronounced anti-correlated intensity oscilla- tions during the acoustic cycle. These arise from a dynamically triggered carrier extraction out of the quantum dot to a continuum in the radial heterostructure. Using finite element modeling and Wentzel-Kramers-Brillouin theory we identify quantum tunneling as the underlying mech- anism. These simulation results quantitatively reproduce the observed switching and show that in our systems these quantum dots are spatially separated from the continuum by > 10.5 nm., Comment: This document is the unedited Author's version of a Submitted Work that was subsequently accepted for publication in Nano Letters, copyright \c{copyright} American Chemical Society after peer review. To access the final edited and published work see http://pubs.acs.org/doi/abs/10.1021/nl4040434

We report on optical experiments performed on individual GaAs nanowires and the ma- nipulation of their temporal emission characteristics using a surface acoustic wave. We find a pronounced, characteristic suppression of the emission intensity for the surface acoustic wave propagation aligned with the axis of the nanowire. Furthermore, we demonstrate that this quenching is dynamical as it shows a pronounced modulation as the local phase of the surface acoustic wave is tuned. These effects are strongly reduced for a SAW applied in the direction perpendicular to the axis of the nanowire due to their inherent one-dimensional geometry. We resolve a fully dynamic modulation of the nanowire emission up to 678 MHz not limited by the physical properties of the nanowires., Comment: This document is the Accepted Manuscript version of a Published Work that appeared in final form in Nano Letters, copyright \c{opyright} American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://pubs.acs.org/doi/abs/10.1021/nl1042775

The excitonic occupancy state of a single, nanowire-based, heterostructure quantum dot is dynamically programmed by a surface acoustic wave. The quantum dot is formed by an interface or thickness fluctuation of a GaAs QW embedded in a AlGaAs shell of a GaAs-AlGaAs core-shell nanowire. As we tune the time at which carriers are photogenerated during the acoustic cycle, we find pronounced intensity oscillations of neutral and negatively charged excitons. At high acoustic power levels these oscillations become anticorrelated which enables direct acoustic programming of the dot's charge configuration, emission intensity and emission wavelength. Numerical simulations confirm that the observed modulations arise from acoustically controlled modulations of the electron and electron-hole-pair concentrations at the position of the quantum dot., Comment: Revised manuscript, 12 pages, submitted to J. Phys. D as a contribution in a Special Issue on Nanowires

We study the carrier injection into a single InGaAs/GaAs quantum dot regulated by a radio frequency surface acoustic wave. We find that the time of laser excitation during the acoustic cycle programs both the emission intensities and time of formation of neutral $(X^0)$ and negatively charged $(X^-)$ excitons. We identify underlying, characteristic formation pathways of both few-particle states in the time-domain experiments and show that both exciton species can be formed either with the optical pump or at later times by injection of single electrons and holes "surfing" the acoustic wave. All experimental observations are in excellent agreement with calculated electron and hole trajectories in the plane of the two-dimensional wetting layer which is dynamically modulated by the acoustically induced piezoelectric potentials. Taken together, our findings provide insight on both the onset of acousto-electric transport of electrons and holes and their conversion into the optical domain after regulated injection into a single quantum dot emitter.

Gated terahertz cyclotron resonance measurements on epitaxial Bi2Se3 thin films capped with In2Se3 enable the first spectroscopic characterization of a single topological interface state from the vicinity of the Dirac point to above the conduction band edge. A precipitous drop in the scattering rate with Fermi energy is observed that is interpreted as the surface state decoupling from bulk states and evidence of a shift of the Dirac point towards mid-gap. Near the Dirac point, potential fluctuations of 50 meV are deduced from an observed loss of differential optical spectral weight near the Dirac point. Potential fluctuations are reduced by a factor of two at higher surface Fermi levels in the vicinity of the conduction band edge inferred from the width of the scattering rate step. The passivated topological interface state attains a high mobility of 3500 cm2/Vsec near the Dirac point., Comment: 12 Pages, 6 figures

We experimentally study the optical emission of a thin quantum well and its dynamic modulation by a surface acoustic wave (SAW). We observe a characteristic transition of the modulation from one maximum to two maxima per SAW cycle as the acoustic power is increased which we find in good agreement with numer- ical calculations of the SAW controlled carrier dynamics. At low acoustic powers the carrier mobilites limit electron-hole pair dissociation, whereas at high power levels the induced electric fields give rise to efficient acousto-electric carrier transport. The direct comparison between the experimental data and the numerical simulations provide an absolute calibration of the local SAW phase., Comment: 5 pages - to appear in JETP Letters