Search

We present a study by Scanning Tunneling Microscopy, supported by ab initio calculations, of the interaction between graphene and monolayer (semiconducting) PtSe$_2$ as a function of the twist angle ${\theta}$ between the two layers. We analyze the PtSe$_2$ contribution to the hybrid interface states that develop within the bandgap of the semiconductor to probe the interaction. The experimental data indicate that the interlayer coupling increases markedly with the value of ${\theta}$, which is confirmed by ab initio calculations. The moir\'e patterns observed within the gap are consistent with a momentum conservation rule between hybridized states, and the strength of the hybridization can be qualitatively described by a perturbative model., Comment: Article: 12 pages, 3 figures; Supporting Informations: 19 pages, 12 figures

Topological insulators (TIs) hold great promises for new spin-related phenomena and applications thanks to the spin texture of their surface states. However, a versatile platform allowing for the exploitation of these assets is still lacking due to the difficult integration of these materials with the mainstream Si-based technology. Here, we exploit germanium as a substrate for the growth of Bi$_2$Se$_3$, a prototypical TI. We probe the spin properties of the Bi$_2$Se$_3$/Ge pristine interface by investigating the spin-to-charge conversion taking place in the interface states by means of a non-local detection method. The spin population is generated by optical orientation in Ge, and diffuses towards the Bi$_2$Se$_3$ which acts as a spin detector. We compare the spin-to-charge conversion in Bi$_2$Se$_3$/Ge with the one taking place in Pt in the same experimental conditions. Notably, the sign of the spin-to-charge conversion given by the TI detector is reversed compared to the Pt one, while the efficiency is comparable. By exploiting first-principles calculations, we ascribe the sign reversal to the hybridization of the topological surface states of Bi$_2$Se$_3$ with the Ge bands. These results pave the way for the implementation of highly efficient spin detection in TI-based architectures compatible with semiconductor-based platforms., Comment: 5 pages and 5 figures

Relating magnetotransport properties to specific spin textures at surfaces or interfaces is an intense field of research nowadays. Here, we investigate the variation of the electrical resistance of Ge(111) grown epitaxially on semi-insulating Si(111) under the application of an external magnetic field. We find a magnetoresistance term which is linear in current density j and magnetic field B, hence odd in j and B, corresponding to a unidirectional magnetoresistance. At 15 K, for I = 10 $\mu$A (or j = 0.33 A/m) and B = 1 T, it represents 0.5 % of the zero field resistance, a much higher value compared to previous reports on unidirectional magnetoresistance. We ascribe the origin of this magnetoresistance to the interplay between the externally applied magnetic field and the current-induced pseudo-magnetic field in the spin-splitted subsurface states of Ge(111). This unidirectional magnetoresistance is independent of the current direction with respect to the Ge crystal axes. It progressively vanishes, either using a negative gate voltage due to carrier activation into the bulk (without spin-splitted bands), or by increasing the temperature due to the Rashba energy splitting of the subsurface states lower than $\sim$58 k$_B$. The highly developed technologies on semiconductor platforms would allow the rapid optimization of devices based on this phenomenon., Comment: 5 pages, 4 figures

We present experimental results on the conversion of a spin current into a charge current by spin pumping into the Dirac cone with helical spin polarization of the elemental topological insulator (TI) {\alpha}-Sn[1-3]. By angle-resolved photoelectron spectroscopy (ARPES) we first confirm that the Dirac cone at the surface of {\alpha}-Sn (0 0 1) layers subsists after covering with Ag. Then we show that resonant spin pumping at room temperature from Fe through Ag into {\alpha}-Sn layers induces a lateral charge current that can be ascribed to the Inverse Edelstein Effect[4-5]. Our observation of an Inverse Edelstein Effect length[5-6] much longer than for Rashba interfaces[5-10] demonstrates the potential of the TI for conversion between spin and charge in spintronic devices. By comparing our results with data on the relaxation time of TI free surface states from time-resolved ARPES, we can anticipate the ultimate potential of TI for spin to charge conversion and the conditions to reach it., Comment: 14 pages, 5 figures

The understanding and calculation of spin transport are essential elements for the development of spintronics devices. Here, we propose a simple method to calculate analytically the spin accumulations, spin currents and magnetoresistances in complex systems. This can be used both for CPP experiments in multilayers and for multiterminal nanostructures made of semiconductors, oxides, metals and carbon allotropes., Comment: 12 pages and 7 figures

We have characterized a film of Ge_0.9Mn_0.1 forming self-organized nanocolumns perpendicular to the Ge substrate with high resolution scanning transmission electron microscopy combined with electron energy loss spectroscopy, and bulk magnetization and positive muon spin rotation and relaxation (muSR) measurements. The Mn-rich nanocolumns form a triangular lattice with no detectable Mn atoms in the matrix. They consist of cores surrounded by shells. The combined analysis of bulk magnetization and muSR data enables us to characterize the electronic and magnetic properties of both the cores and shells. The discovered phase separation of the columns between a core and a shell is probably relevant for other transition-metal doped semiconductors., Comment: 5 pages, 5 figures, and supplemental material

Through combined ferromagnetic resonance, spin-pumping and inverse spin Hall effect experiments in Co|Pt bilayers and Co|Cu|Pt trilayers, we demonstrate consistent values of spin diffusion length $\ell_{\rm sf}^{\rm Pt}=3.4\pm0.4$ nm and of spin Hall angle $\theta_{\rm SHE}^{\rm Pt}=0.051\pm0.004$ for Pt. Our data and model emphasize on the partial depolarization of the spin current at each interface due to spin-memory loss. Our model reconciles the previously published spin Hall angle values and explains the different scaling lengths for the ferromagnetic damping and the spin Hall effect induced voltage., Comment: 6 pages, 3 figures (main text) and 8 pages supplementary. Published with small modifications in Phys. Rev. Lett

We have measured the inverse spin Hall effect (ISHE) in \textit{n}-Ge at room temperature. The spin current in germanium was generated by spin pumping from a CoFeB/MgO magnetic tunnel junction in order to prevent the impedance mismatch issue. A clear electromotive force was measured in Ge at the ferromagnetic resonance of CoFeB. The same study was then carried out on several test samples, in particular we have investigated the influence of the MgO tunnel barrier and sample annealing on the ISHE signal. First, the reference CoFeB/MgO bilayer grown on SiO$_{2}$ exhibits a clear electromotive force due to anisotropic magnetoresistance and anomalous Hall effect which is dominated by an asymmetric contribution with respect to the resonance field. We also found that the MgO tunnel barrier is essential to observe ISHE in Ge and that sample annealing systematically lead to an increase of the signal. We propose a theoretical model based on the presence of localized states at the interface between the MgO tunnel barrier and Ge to account for these observations. Finally, all of our results are fully consistent with the observation of ISHE in heavily doped $n$-Ge and we could estimate the spin Hall angle at room temperature to be $\approx$0.001., Comment: 34 pages, 14 figures

In this letter, we first show electrical spin injection in the germanium conduction band at room temperature and modulate the spin signal by applying a gate voltage to the channel. The corresponding signal modulation agrees well with the predictions of spin diffusion models. Then by setting a temperature gradient between germanium and the ferromagnet, we create a thermal spin accumulation in germanium without any tunnel charge current. We show that temperature gradients yield larger spin accumulations than pure electrical spin injection but, due to competing microscopic effects, the thermal spin accumulation in germanium remains surprisingly almost unchanged under the application of a gate voltage to the channel., Comment: 7 pages, 3 figures

Electrical spin injection into semiconductors paves the way for exploring new phenomena in the area of spin physics and new generations of spintronic devices. However the exact role of interface states in spin injection mechanism from a magnetic tunnel junction into a semiconductor is still under debate. In this letter, we demonstrate a clear transition from spin accumulation into interface states to spin injection in the conduction band of $n$-Ge. We observe spin signal amplification at low temperature due to spin accumulation into interface states followed by a clear transition towards spin injection in the conduction band from 200 K up to room temperature. In this regime, the spin signal is reduced down to a value compatible with spin diffusion model. More interestingly, we demonstrate in this regime a significant modulation of the spin signal by spin pumping generated by ferromagnetic resonance and also by applying a back-gate voltage which are clear manifestations of spin current and accumulation in the germanium conduction band., Comment: 5 pages, 4 figures

We report on the exchange biasing of self-assembled ferromagnetic GeMn nanocolumns by GeMn-oxide caps. The x-ray absorption spectroscopy analysis of this surface oxide shows a multiplet fine structure that is typical of the Mn2+ valence state in MnO. A magnetization hysteresis shift |HE|~100 Oe and a coercivity enhancement of about 70 Oe have been obtained upon cooling (300-5 K) in a magnetic field as low as 0.25 T. This exchange bias is attributed to the interface coupling between the ferromagnetic nanocolumns and the antiferromagnetic MnO-like caps. The effect enhancement is achieved by depositing a MnO layer on the GeMn nanocolumns., Comment: 7 pages, 5 figures

An improved micro-SQUID technique is presented allowing us to measure the temperature dependence of the magnetisation switching fields of single nanoparticles well above the critical superconducting temperature of the SQUID. Our first measurements on 3 nm cobalt nanoparticle embedded in a niobium matrix are compared to the Neel Brown model describing the magnetisation reversal by thermal activation over a single anisotropy barrier., Comment: 3 pages, 4 figures; conference proceeding: 1st Joint European Magnetic Symposia (JEMS'01), Grenoble (France), 28th August - 1st September, 2001

A low concentration of cobalt clusters with a fcc structure and containing almost one thousand atoms are embedded in two different metallic matrices: platinum and niobium. Samples have been prepared using a co-deposition technique. Cobalt clusters preformed in the gas phase and matrix atoms are simultaneously deposited on a silicon substrate under Ultra High Vacuum conditions. This original technique allows to prepare nanostructured systems from miscible elements such as Co/Pt and Co/Nb in which clusters keep a pure cobalt core surrounded with an alloyed interface. Magnetic measurements performed using a Vibrating Sample Magnetometer (VSM) reveal large differences in the magnetic properties of cobalt clusters in Pt and Nb pointing out the key role of cluster/matrix interfaces., Comment: 7 pages (LaTeX), 12 PostScript figures, 1 PostScript table

Using a new microSQUID set-up, we investigate magnetic anisotropy in a single 1000-atoms cobalt cluster. This system opens new fields in the characterization and the understanding of the origin of magnetic anisotropy in such nanoparticles. For this purpose, we report three-dimensional switching field measurements performed on a 3 nm cobalt cluster embedded in a niobium matrix. We are able to separate the different magnetic anisotropy contributions and evidence the dominating role of the cluster surface., Comment: 4 pages, 8 figures