Search

Single photon emitters (SPEs) are building blocks of quantum technologies. Defect engineering of 2D materials is ideal to fabricate SPEs, wherein spatially deterministic and quality-preserving fabrication methods are critical for integration into quantum devices and cavities. Existing methods use combination of strain and electron irradiation, or ion irradiation, which make fabrication complex, and limited by surrounding lattice damage. Here, we utilise only ultra-low energy electron beam irradiation (5 keV) to create dilute defect density in hBN-encapsulated monolayer MoS2, with ultra-high spatial resolution (< 50 nm, extendable to 10 nm). Cryogenic photoluminescence spectra exhibit sharp defect peaks, following power-law for finite density of single defects, and characteristic Zeeman splitting for MoS2 defect complexes. The sharp peaks have low spectral jitter (< 200 {\mu}eV), and are tuneable with gate-voltage and electron beam energy. Use of low-momentum electron irradiation, ease of processing, and high spatial resolution, will disrupt deterministic creation of high-quality SPEs., Comment: 31 pages, 16 figures, 1 table. Supplementary Material included

Despite decades of research, demonstration of all-optical detection and control of free electron spins in silicon remains elusive. Here, we directly probe the electron spin properties in bulk silicon by measuring the polarization of luminescence following circularly polarized light excitation. The experiments performed for both direct and indirect gap excitation allow not only an experimental determination of the optical selection rules in silicon for the different phononassisted transitions but they also lead to the measurement of the spin relaxation of electrons in conditions which are not accessible using transport techniques. We also measure the spin properties of free excitons in bulk silicon, a very little explored field.

One of the main interests of 2D materials is their ability to be assembled with many degrees of freedom for tuning and manipulating excitonic properties. There is a need to understand how the structure of the interfaces between atomic layers influences exciton properties. Here we use cathodoluminescence (CL) and time-resolved CL experiments to study how excitons interact with the interface between two twisted hexagonal boron nitride (hBN) crystals with various angles. An efficient capture of free excitons by the interface is demonstrated, which leads to a population of long lived and interface-localized (2D) excitons. Temperature dependent experiments indicate that for high twist angles, these excitons localized at the interface further undergo a self-trapping. It consists in a distortion of the lattice around the exciton on which the exciton traps itself. Our results suggest that this exciton-interface interaction causes a broad optical emission of highly twisted hBN-hBN structures around 300 nm (4 eV). Exciton self-trapping is finally discussed as a common feature of sp2 hybridized boron nitride polytypes and nanostructures due to the ionic nature of the B-N bond and their compact excitons., Comment: 15 pages, 13 figures

For the past few years, 2D ferroelectric materials have attracted strong interest for their potential in future nanoelectronics devices. The recent discovery of 2D ferroelectricity in twisted layers of insulating hexagonal boron nitride, one of the most used 2D materials, has opened the route to its integration into complex van der Waals heterostructures combining hybrid properties. Here we show that opposite polarizations in ferroelectric domains of a folded hBN layer can imprint local n and p doping in a semiconducting transition metal dichalcogenide WSe2 monolayer. We demonstrate that WSe2 can be used as an optical probe of ferroelectricity in hBN and show that the doping density and type can be controlled with the position of the semiconductor with respect to the ferroelectric interface. Our results establish the ferroelectric hBN/WSe2 van der Waals stacking as a promising optoelectronic structure.

Van der Waals magnetic materials are building blocks for novel kinds of spintronic devices and playgrounds for exploring collective magnetic phenomena down to the two-dimensional limit. Chromium-tellurium compounds are relevant in this perspective. In particular, the 1$T$ phase of CrTe$_2$ has been argued to have a Curie temperature above 300~K, a rare and desirable property in the class of lamellar materials, making it a candidate for practical applications. However, recent literature reveals a strong variability in the reported properties, including magnetic ones. Using electron microscopy, diffraction and spectroscopy techniques, together with local and macroscopic magnetometry approaches, our work sheds new light on the structural, chemical and magnetic properties of bulk 1$T$-CrTe$_2$ exfoliated in the form of flakes having a thickness ranging from few to several tens of nanometers. We unambiguously establish that 1$T$-CrTe$_2$ flakes are ferromagnetic above room temperature, have an in-plane easy axis of magnetization, low coercivity, and we confirm that their Raman spectroscopy signatures are two modes, $E_{2\text{g}}$ (103.5~cm$^{-1}$) and $A_{1\text{g}}$ (136.5~cm$^{-1}$). We also prove that thermal annealing causes a phase transformation to monoclinic Cr$_5$Te$_8$ and, to a lesser extent, to trigonal Cr$_5$Te$_8$. In sharp contrast with 1$T$-CrTe$_2$, none of these compounds have a Curie temperature above room temperature, and they both have perpendicular magnetic anisotropy. Our findings reconcile the apparently conflicting reports in the literature and open opportunities for phase-engineered magnetic properties.

We report one-pot chemical vapor deposition (CVD) growth of large-area Janus SeMoS monolayers, with the asymmetric top (Se) and bottom (S) chalcogen atomic planes with respect to the central transition metal (Mo) atoms. The formation of these two-dimensional semiconductor monolayers takes place upon the thermodynamic equilibrium-driven exchange of the bottom Se atoms of the initially grown MoSe2 single crystals on gold foils with S atoms. The growth process is characterized by complementary experimental techniques including Raman and X-ray photoelectron spectroscopy and the growth mechanisms are rationalized by first principle calculations. The remarkably high optical quality of the synthesized Janus monolayers is demonstrated by optical and magneto-optical measurements which reveal the strong exciton-phonon coupling and enable to obtain the exciton g-factor of -3.3.

The variety of excitonic states in tungsten-based dichalcogenide monolayers stems from unique interplay between the spin and valley degrees of freedom. One of the exciton species is the indirect exciton (momentum or valley dark), which is responsible to a series of resonances when the monolayer is charge neutral. We investigate the short-range electron-hole exchange interaction of the indirect exciton, as well as its recombination mechanism mediated by impurities. The analysis provides thorough understanding of the energy and polarization of the zero-phonon indirect exciton resonance in the emission spectrum.

Using a spatially-resolved optical pump-probe experiment, we measure the lateral transport of spin/valley polarized electrons over very long distances (tens of micrometers) in a single WSe2 monolayer. By locally pumping the Fermi sea of 2D electrons to a high degree of spin/valley polarization (up to 75%) using circularly-polarized light, the lateral diffusion of the electron polarization can be mapped out via the photoluminescence induced by a spatially-separated and linearly-polarized probe laser. Up to 25% spin-valley polarization is observed at pump-probe separations up to 20 microns. Characteristic spin/valley diffusion lengths of 18 +/- 3 um are revealed at low temperatures. The dependence on temperature, pump helicity, pump intensity, and electron density highlight the key roles played by spin relaxation time and pumping efficiency on polarized electron transport in monolayer semiconductors possessing spin-valley locking.

In the wide world of 2D materials, hexagonal boron nitride (hBN) holds a special place due to its excellent characteristics. In addition to its thermal, chemical and mechanical stability, hBN demonstrates high thermal conductivity, low compressibility, and wide band gap around 6 eV, making it promising candidate for many groundbreaking applications and more specifically for optoelectronic devices. Millimeters scale hexagonal boron nitride crystals are obtained through a disruptive dual method (PDC/PCS) consisting in a complementary coupling of the Polymer Derived Ceramics route and a Pressure-Controlled Sintering process. In addition to their excellent chemical and crystalline quality, these crystals exhibit a free exciton lifetime of 0.43 ns, as determined by time-resolved cathodoluminescence measurements, confirming their interesting optical properties. To go further in applicative fields, hBN crystals are then exfoliated, and resulting Boron Nitride NanoSheets (BNNSs) are used to encapsulate transition metal dichalcogenides (TMDs). Such van der Waals heterostructures are tested by optical spectroscopy. BNNSs do not luminesce in the emission spectral range of TMDs and the photoluminescence width of the exciton at 4K is in the range 2-3 meV. All these results demonstrate that these BNNSs are relevant for future opto-electronic applications., Comment: 16 pages, 9 figures

The twist angle in transition metal dichalcogenide (TMD) heterobilayers is a compelling degree of freedom that determines electron correlations and the period of lateral confinement of moir\'e excitons. Here we perform polarization-resolved second harmonic generation (SHG) spectroscopy of MoS2/WSe2 heterostructures. We demonstrate that by choosing suitable laser energies the twist angle between two monolayers can be measured directly on the assembled heterostructure. We show that the amplitude and polarization of the SHG signal from the heterostructure are determined by the twist angle between the layers and exciton resonances at the SH energy. For heterostructures with close to zero twist angle, we observe changes of exciton resonance energies and the appearance of new resonances in the linear and non-linear susceptibilities., Comment: main text and supplement

We present photoluminescence measurements in monolayer WSe$_2$, which point to the importance of the interaction between charged particles and excitonic complexes. The theoretical analysis highlights the key role played by exchange scattering, referring to cases wherein the particle composition of the complex changes after the interaction. For example, exchange scattering renders bright excitonic complexes dark in monolayer WSe$_2$ on accounts of the unique valley-spin configuration in this material. In addition to the ultrafast energy relaxation of hot excitonic complexes following their interaction with electrons or holes, our analysis sheds light on several key features that are commonly seen in the photoluminescence of this monolayer semiconductor. In particular, we can understand why the photoluminescence intensity of the neutral bright exciton is strongest when the monolayer is hole-doped rather than charge neutral or electron-doped. Or the reason for the dramatic increase of the photoluminescence intensity of negatively-charged excitons (trions) as soon as electrons are added to the monolayer. To self-consistently explain the findings, we further study the photoluminescence spectra at different excitation energies and analyze the behavior of the elusive indirect exciton., Comment: 10 figures. Any feedback will be appreciated. If you think we have missed a relevant reference, then please let us know the reason we should add the reference and where exactly in the text

Perpendicularly magnetized spin injector with high Curie temperature is a prerequisite for developing spin optoelectronic devices on 2D materials working at room temperature (RT) with zero applied magnetic field. Here, we report the growth of Ta/CoFeB/MgO structures with a large perpendicular magnetic anisotropy (PMA) on full coverage monolayer (ML) MoS2. A large perpendicular interface anisotropy energy of 0.975mJ/m2 has been obtained at the CoFeB/MgO interface, comparable to that observed in magnetic tunnel junction systems. It is found that the insertion of MgO between the ferromagnetic metal (FM) and the 2D material can effectively prevent the diffusion of the FM atoms into the 2D material. Moreover, the MoS2 ML favors a MgO(001) texture and plays a critical role to establish the large PMA. First principle calculations on a similar Fe/MgO/MoS2 structure reveal that the MgO thickness can modify the MoS2 band structure, from an indirect bandgap with 7ML-MgO to a direct bandgap with 3ML-MgO. Proximity effect induced by Fe results in a splitting of 10meV in the valence band at the {\Gamma} point for the 3ML-MgO structure while it is negligible for the 7ML-MgO structure. These results pave the way to develop RT spin optoelectronic devices on 2D transition-metal dichalcogenide materials.

Hyperspectral imaging at cryogenic temperatures is used to investigate exciton and trion propagation in MoSe$_2$ monolayers encapsulated with hexagonal boron nitride (hBN). Under a tightly focused, continuous-wave laser excitation, the spatial distribution of neutral excitons and charged trions strongly differ at high excitation densities. Remarkably, in this regime the trion distribution develops a halo shape, similar to that previously observed in WS2 monolayers at room temperature and under pulsed excitation. In contrast, the exciton distribution only presents a moderate broadening without the appereance of a halo. Spatially and spectrally resolved luminescence spectra reveal the buildup of a significant temperature gradient at high excitation power, that is attributed to the energy relaxation of photoinduced hot carriers. We show, via a numerical resolution of the transport equations for excitons and trions, that the halo can be interpreted as thermal drift of trions due to a Seebeck term in the particle current. The model shows that the difference between trion and exciton profiles is simply understood in terms of the very different lifetimes of these two quasiparticles.

Monolayers of transition metal dichalcogenides are ideal materials to control both spin and valley degrees of freedom either electrically or optically. Nevertheless, optical excitation mostly generates excitons species with inherently short lifetime and spin/valley relaxation time. Here we demonstrate a very efficient spin/valley optical pumping of resident electrons in n-doped WSe2 and WS2 monolayers. We observe that, using a continuous wave laser and appropriate doping and excitation densities, negative trion doublet lines exhibit circular polarization of opposite sign and the photoluminescence intensity of the triplet trion is more than four times larger with circular excitation than with linear excitation. We interpret our results as a consequence of a large dynamic polarization of resident electrons using circular light.

Second harmonic generation (SHG) is a non-linear optical process, where two photons coherently combine into one photon of twice their energy. Efficient SHG occurs for crystals with broken inversion symmetry, such as transition metal dichalcogenide monolayers. Here we show tuning of non-linear optical processes in an inversion symmetric crystal. This tunability is based on the unique properties of bilayer MoS2, that shows strong optical oscillator strength for the intra- but also inter-layer exciton resonances. As we tune the SHG signal onto these resonances by varying the laser energy, the SHG amplitude is enhanced by several orders of magnitude. In the resonant case the bilayer SHG signal reaches amplitudes comparable to the off-resonant signal from a monolayer. In applied electric fields the interlayer exciton energies can be tuned due to their in-built electric dipole via the Stark effect. As a result the interlayer exciton degeneracy is lifted and the bilayer SHG response is further enhanced by an additional two orders of magnitude, well reproduced by our model calculations., Comment: main paper and supplement

The electron valley and spin degree of freedom in monolayer transition-metal dichalcogenides can be manipulated in optical and transport measurements performed in magnetic fields. The key parameter for determining the Zeeman splitting, namely the separate contribution of the electron and hole g-factor, is inaccessible in most measurements. Here we present an original method that gives access to the respective contribution of the conduction and valence band to the measured Zeeman splitting. It exploits the optical selection rules of exciton complexes, in particular the ones involving inter-valley phonons, avoiding strong renormalization effects that compromise single particle g-factor determination in transport experiments. These studies yield a direct determination of single band g factors. We measure gc1= 0.86, gc2=3.84 for the bottom (top) conduction bands and gv=6.1 for the valence band of monolayer WSe2. These measurements are helpful for quantitative interpretation of optical and transport measurements performed in magnetic fields. In addition the measured g-factors are valuable input parameters for optimizing band structure calculations of these 2D materials.

In this technical review we give an introduction to optical spectroscopy for layered materials as a powerful, non-invasive tool to access details of the electronic band structure and crystal quality. Potential applications in photonics and optoelectronics are based on our understanding of the light-matter interaction on an atomic monolayer scale. Here atomically thin transition metal dichalcogenides, such as MoS2 and WSe2, are model systems for layered semiconductors with a bandgap in the visible region of the optical spectrum. They can be assembled to form heterostructures and combine the unique properties of the constituent monolayers. We review the working principles of micro-photoluminescence spectroscopy and optical absorption experiments. We discuss the physical origin of the main absorption and emission features in the optical spectra and how they can be tuned. We explain key-aspects of practical set-ups for performing experiments in different conditions such as variable temperatures or in applied magnetic fields and how parameters such as detection spot size and excitation laser wavelength impact the optical spectra. We describe the important influence of the direct sample environment, such as substrates and encapsulation layers, on the emission and absorption mechanisms. A survey of optical techniques that probe the coupling between layers and analyse carrier polarisation dynamics for spin- and valleytronics is provided., Comment: 12 pages, 4 Figures, initial version

Transition metal dichalcogenides (TMDs) constitute a versatile platform for atomically thin optoelectronics devices and spin-valley memory applications. In monolayers optical absorption is strong, but the transition energy is not tunable as the neutral exciton has essentially no out-of-plane electric dipole. In contrast, interlayer exciton transitions in heterobilayers are widely tunable in applied electric fields, but their coupling to light is considerably reduced. Here, we show tuning over 120 meV of interlayer excitons with high oscillator strength in bilayer MoS2. These shifts are due to the quantum confined Stark effect, here the electron is localised to one of the layers yet the hole is delocalised across the bilayer. We optically probe the interaction between intra- and interlayer excitons as they are energetically tuned into resonance. This allows studying their mixing supported by beyond standard density functional theory calculations including excitonic effects. In MoS2 trilayers our experiments uncover two types of interlayer excitons with and without in-built electric dipoles, respectively. Highly tunable excitonic transitions with large oscillator strength and in-built dipoles, that lead to considerable exciton-exciton interactions, hold great promise for non-linear optics with polaritons., Comment: final author version

Combining MoS$_2$ monolayers to form multilayers allows to access new functionalities. In this work, we examine the correlation between the stacking order and the interlayer coupling of valence states in MoS$_2$ homobilayer samples grown by chemical vapor deposition (CVD) and artificially stacked bilayers from CVD monolayers. We show that hole delocalization over the bilayer is allowed in 2H stacking and results in strong interlayer exciton absorption and also in a larger A-B exciton separation as compared to 3R bilayers, where both holes and electrons are confined to the individual layers. Comparing 2H and 3R reflectivity spectra allows to extract an interlayer coupling energy of about $t_\perp=49$ meV. Obtaining very similar results for as-grown and artificially stacked bilayers is promising for assembling large area van der Waals structures with CVD material, using interlayer exciton absorption and A-B exciton separation as indicators for interlayer coupling. Beyond DFT calculations including excitonic effects confirm signatures of efficient interlayer coupling for 2H stacking in agreement with our experiments., Comment: 10 pages including supplement, 3 + 4 figures

The valley degree of freedom is a sought-after quantum number in monolayer transition-metal dichalcogenides. Similar to optical spin orientation in semiconductors, the helicity of absorbed photons can be relayed to the valley (pseudospin) quantum number of photoexcited electrons and holes. Also similar to the quantum-mechanical spin, the valley quantum number is not a conserved quantity. Valley depolarization of excitons in monolayer transition-metal dichalcogenides due to long-range electron-hole exchange typically takes a few ps at low temperatures. Exceptions to this behavior are monolayers MoSe$_2$ and MoTe$_2$ wherein the depolarization is much faster. We elucidate the enigmatic anomaly of these materials, finding that it originates from Rashba-induced coupling of the dark and bright exciton branches next to their degeneracy point. When photoexcited excitons scatter during their energy relaxation between states next to the degeneracy region, they reach the light cone after losing the initial helicity. The valley depolarization is not as fast in monolayers WSe$_2$, WS$_2$ and likely MoS$_2$ wherein the Rashba-induced coupling is negligible., Comment: We would appreciate any feedback

Atomically thin semiconductors made from transition metal dichalcogenides (TMDs) are model systems for investigations of strong light-matter interactions and applications in nanophotonics, opto-electronics and valley-tronics. However, the photoluminescence spectra of TMD monolayers display a large number of features that are particularly challenging to decipher. On a practical level, monochromatic TMD-based emitters would be beneficial for low-dimensional devices but this challenge is yet to be resolved. Here, we show that graphene, directly stacked onto TMD monolayers enables single and narrow-line photoluminescence arising solely from TMD neutral excitons. This filtering effect stems from complete neutralization of the TMD by graphene combined with selective non-radiative transfer of long-lived excitonic species to graphene. Our approach is applied to four tungsten and molybdenum-based TMDs and establishes TMD/graphene heterostructures as a unique set of opto-electronic building blocks, suitable for electroluminescent systems emitting visible and near-infrared photons at near THz rate with linewidths approaching the lifetime limit., Comment: Main manuscript with 5 figures plus supplementary information file (including 9 supplementary sections and 14 supplementary figures)

Chemical vapor deposition (CVD) allows growing transition metal dichalcogenides (TMDs) over large surface areas on inexpensive substrates. In this work, we correlate the structural quality of CVD grown MoS$_2$ monolayers (MLs) on SiO$_2$/Si wafers studied by high-resolution transmission electron microscopy (HRTEM) with high optical quality revealed in optical emission and absorption from cryogenic to ambient temperatures. We determine a defect concentration of the order of 10$^{13}$ cm$^{-2}$ for our samples with HRTEM. To have access to the intrinsic optical quality of the MLs, we remove the MLs from the SiO$_2$ growth substrate and encapsulate them in hBN flakes with low defect density, to reduce the detrimental impact of dielectric disorder. We show optical transition linewidth of 5 meV at low temperature (T=4 K) for the free excitons in emission and absorption. This is comparable to the best ML samples obtained by mechanical exfoliation of bulk material. The CVD grown MoS$_2$ ML photoluminescence is dominated by free excitons and not defects even at low temperature. High optical quality of the samples is further confirmed by the observation of excited exciton states of the Rydberg series. We optically generate valley coherence and valley polarization in our CVD grown MoS$_2$ layers, showing the possibility for studying spin and valley physics in CVD samples of large surface area., Comment: 12 pages, 3 figures, supplement

The photoluminescence (PL) spectrum of transition metal dichalcogenides (TMDs) shows a multitude of emission peaks below the bright exciton line and not all of them have been explained yet. Here, we study the emission traces of phonon-assisted recombinations of momentum-dark excitons. To this end, we develop a microscopic theory describing simultaneous exciton, phonon and photon interaction and including consistent many-particle dephasing. We explain the drastically different PL below the bright exciton in tungsten- and molybdenum-based materials as result of different configurations of bright and dark states. In good agreement with experiments, we show that WSe$_2$ exhibits clearly visible low-temperature PL signals stemming from the phonon-assisted recombination of momentum-dark excitons.

Coulomb bound electron-hole pairs, excitons, govern the optical properties of semi-conducting transition metal dichalcogenides like MoS$_2$ and WSe$_2$. We study optical transitions at the K-point for 2H homobilayer MoS$_2$ in Density Functional Theory (DFT) including excitonic effects and compare with reflectivity measurements in high quality samples encapsulated in hexagonal BN. In both calculated and measured spectra we find a strong interlayer exciton transition in energy between A and B intralayer excitons, observable for T$=4 -300$ K, whereas no such transition is observed for the monolayer in the same structure in this energy range. The interlayer excitons consist of an electron localized in one layer and a hole state delocalized over the bilayer, which results in the unusual combination of high oscillator strength and a static dipole moment. We also find signatures of interlayer excitons involving the second highest valence band (B) and compare absorption calculations for different bilayer stackings. For homotrilayer MoS$_2$ we also observe interlayer excitons and an energy splitting between different intralayer A-excitons originating from the middle and outer layers, respectively., Comment: 9 pages, 6 figures

The intricate interplay between optically dark and bright excitons governs the light-matter interaction in transition metal dichalcogenide monolayers. We have performed a detailed investigation of the "spin-forbidden" dark excitons in WSe2 monolayers by optical spectroscopy in an out-of-plane magnetic field Bz. In agreement with the theoretical predictions deduced from group theory analysis, magneto-photoluminescence experiments reveal a zero field splitting $\delta=0.6 \pm 0.1$ meV between two dark exciton states. The low energy state being strictly dipole forbidden (perfectly dark) at Bz=0 while the upper state is partially coupled to light with z polarization ("grey" exciton). The first determination of the dark neutral exciton lifetime $\tau_D$ in a transition metal dichalcogenide monolayer is obtained by time-resolved photoluminescence. We measure $\tau_D \sim 110 \pm 10$ ps for the grey exciton state, i.e. two orders of magnitude longer than the radiative lifetime of the bright neutral exciton at T=12 K.

The optical response of traditional semiconductors depends on the laser excitation power used in experiments. For two-dimensional (2D) semiconductors, laser excitation effects are anticipated to be vastly different due to complexity added by their ultimate thinness, high surface to volume ratio, and laser-membrane interaction effects. We show in this article that under laser excitation the optical properties of 2D materials undergo irreversible changes. Most surprisingly these effects take place even at low steady state excitation, which is commonly thought to be non-intrusive. In low temperature photoluminescence (PL) we show for monolayer (ML) MoSe2 samples grown by different techniques that laser treatment increases significantly the trion (i.e. charged exciton) contribution to the emission compared to the neutral exciton emission. Comparison between samples exfoliated onto different substrates shows that laser induced doping is more efficient for ML MoSe2 on SiO2/Si compared to h-BN and gold. For ML MoS2 we show that exposure to laser radiation with an average power in the $\mu$W/$\mu$m$^2$ range does not just increase the trion-to-exciton PL emission ratio, but may result in the irreversible disappearance of the neutral exciton PL emission and a shift of the main PL peak to lower energy., Comment: 16 pages, 5 figures

Developments in optoelectronics and spin-optronics based on transition metal dichalcogenide monolayers (MLs) need materials with efficient optical emission and well-defined transition energies. In as-exfoliated MoS2 MLs the photoluminescence (PL) spectra even at low temperature consists typically of broad, overlapping contributions from neutral, charged excitons (trions) and localized states. Here we show that in superacid treated MoS2 MLs the PL intensity increases by up to 60 times at room temperature. The neutral and charged exciton transitions are spectrally well separated in PL and reflectivity at T=4 K, with linewidth for the neutral exciton of 15 meV, but with similar intensities compared to the ones in as-exfoliated MLs at the same temperature. Time resolved experiments uncover picoseconds recombination dynamics analyzed separately for charged and neutral exciton emission. Using the chiral interband selection rules, we demonstrate optically induced valley polarization for both complexes and valley coherence for only the neutral exciton.

Transition metal dichalcogenide monolayers such as MoSe2,MoS2 and WSe2 are direct bandgap semiconductors with original optoelectronic and spin-valley properties. Here we report spectrally sharp, spatially localized emission in monolayer MoSe2. We find this quantum dot like emission in samples exfoliated onto gold substrates and also suspended flakes. Spatial mapping shows a correlation between the location of emitters and the existence of wrinkles (strained regions) in the flake. We tune the emission properties in magnetic and electric fields applied perpendicular to the monolayer plane. We extract an exciton g-factor of the discrete emitters close to -4, as for 2D excitons in this material. In a charge tunable sample we record discrete jumps on the meV scale as charges are added to the emitter when changing the applied voltage. The control of the emission properties of these quantum dot like emitters paves the way for further engineering of the light matter interaction in these atomically thin materials., Comment: 5 pages, 2 figures

Transition metal dichalcogenide (TMDC) monolayers are newly discovered semiconductors for a wide range of applications in electronics and optoelectronics. Most studies have focused on binary monolayers that share common properties: direct optical bandgap, spin-orbit (SO) splittings of hundreds of meV, light-matter interaction dominated by robust excitons and coupled spin-valley states of electrons. Studies on alloy-based monolayers are more recent, yet they may not only extend the possibilities for TMDC applications through specific engineering but also help understanding the differences between each binary material. Here, we synthesized highly crystalline Mo$_{(1-x)}$W$_{x}$Se$_2$ to show engineering of the direct optical bandgap and the SO coupling in ternary alloy monolayers. We investigate the impact of the tuning of the SO spin splitting on the optical and polarization properties. We show a non-linear increase of the optically generated valley polarization as a function of tungsten concentration, where 40% tungsten incorporation is sufficient to achieve valley polarization as high as in binary WSe2. We also probe the impact of the tuning of the conduction band SO spin splitting on the bright versus dark state population i.e. PL emission intensity. We show that the MoSe2 PL intensity decreases as a function of temperature by an order of magnitude, whereas for WSe2 we measure surprisingly an order of magnitude increase over the same temperature range (T=4-300K). The ternary material shows a trend between these two extreme behaviors. These results show the strong potential of SO engineering in ternary TMDC alloys for optoelectronics and applications based on electron spin- and valley-control., Comment: 5 pages, 3 figures + supplement