Search

The Shockley-Queisser model is a landmark in photovoltaic device analysis by defining an ideal situation as reference for actual solar cells. However, the model and its implications are easily misunderstood. Thus, we present a guide to help understand and avoid misinterpreting it. Focusing on the five assumptions, underlying the model, we define figures of merit to quantify how close real solar cells approach each of these assumptions.

Hot carrier solar cells allow potential efficiency close to the thermodynamical limit in ideal conditions. However, the feasability of such devices has not been clearly stated so far and only ideal cells were considered in previous studies. Here we develop a model with realistic energy selective contacts, carrier thermalization and absorptivity. The requirements in term of contact selectivity is investigated, showing that semi-selective contacts are not incompatible with high efficiencies. Candidates for absorbing material were synthesized and the required thermalization properties are obtained. Specific structures were designed to enhance absorption of concentrated sunlight in a small material thickness, allowing high carrier density in the absorber., Comment: 25th European Photovoltaic Solar Energy Conference and Exhibition / 5th World Conference on Photovoltaic Energy Conversion, Valencia : Spain (2010)

A spatially resolved electroluminescence (EL) imaging experiment is developed to measure the local sheet resistance of the window layer, directly on the completed CIGS cell. Our method can be applied to the EL imaging studies that are made in fundamental studies as well as in in-line process inspection (1-3). The EL experiment consists in using solar cell as a light emitting device : a voltage is applied to the cell and its luminescence is detected. We develop an analytical and quantitative model to simulate the behavior of CIGS solar cells based on the spread sheet resistance effect in the window layer. We determine the repartition of the electric potential on the ZnO, for given cell's characteristics such as sheet resistance and contact geometries. Knowing the repartition of the potential, the EL intensity is estimated and the experimental EL signal is fitted, which allows the determination of the window layer sheet resistance.

Hot Carrier solar cells have long been recognized as an attractive contender in the search for high efficiency photovoltaic devices but their fabrication requires solution of two important material challenges: finding materials with drastically reduced carrier cooling rates and realization of selective energy contacts to extract the photogenerated carriers. This paper is concerned with the problem of absorber phononic engineering to reduce carrier cooling rates. The physics of carrier cooling is explored and experimental data of other authors are discussed with a view to assessing the potential of state-of-the art nanostructured materials for PV conversion. A tentative initial calculation based on the thermalisation in these nanostructures and assuming all other aspects as ideal, gives 54% efficiency at 2500suns as compared to 54% for no thermalisation at all. Phononic band gap engineering to further reduce carrier cooling or bring down the threshold concentration is discussed.

Taking into account the temperature gradients in solar cells, it is shown that their efficiency can be increased beyond the Shockley-Queisser limit (J. Appl. Phys. 32 (1961) 510). The driving force for this gain is the temperature gradient between this region and its surroundings. A quantitative theory is given. Though the effect is found to be weak in conventional solar cells, it is argued that it can be substantially increased by proper choice of materials and design of the device. In particular, it is shown that the insertion of a quantum well can enhance the efficiency beyond one of the single gap cell, due to the presence of temperature jumps at the heterojunctions., Comment: Published in Special issue Physica E 14 (1-2) on Nanostructures in Photovoltaics