Search

This paper presents a mitigation plan for lightning strikes towards the transmission line tower at Kedah paddy field area. The ATP Draw software produces a schematic diagram of an incoming main intake sub-station and a transmission tower struck by lightning. Simulation on multiple soil resistance values and multiple soil conditions are then plot into graphs. A static eliminator reduces the electrostatic force between negatively charged thunder clouds with a positively charged steel transmission tower. It shows that a static eliminator makes the transmission line act invisibly in the lightning pathway. This protection level avoids surge current from transmitting in the transmission line reduces the possibility to damage surge arrestor.

Image filtering is one of the methods used in image processing. It is also can be called as image enhancement. Filter help the problems of the image display and can improvise the quality of the image. The problems that always happened in the image is illumination, noise and under-light images. In addition, these problems also caused a few troubles for image recognition for the daily life of certain people for their work. The purpose of this study is to apply the mathematical algorithm of the filters, identifying the best method of the filters and simulate the result of the image quality assessments in Graphical User Interface (GUI) and Global System for Mobile Notification (GSM). Basically, image processing methods have specific mathematical algorithms. That is the main difference between these methods. For this paper, two types of image have been chosen which is document image and medical image. There were a few methods that were selected in this project. It is a high pass filter, low pass filter, and high boost filter. Thus, homomorphic filtering was applied to that filter. Then, the enhanced images would be simulated to the selected parameters of image quality assessments (IQA). The selected parameter of the image quality assessment is a global contrast factor (GCF) and signal to noise ratio (SNR). If the value of the parameters satisfies its characteristic, the method would be selected as the most suitable method for the image. Meanwhile, the best result will be selected as the best image for this study.

Partial discharge (PD) is an electrical discharge which is one of the most critical breakdown factor that is affecting the electrical equipment. The loss of the power will affect consumers and system operation. High voltage (HV) transformer is one of the equipment’s subjected to phenomena PD. In this paper reviews an application of acoustic methods in transformer and piezoelectric sensors application on PD detection in HV transformer. Based on this review, the new design in acoustic sensor is required in order to improve the sensitivity and bandwidth for PD detection at HV transformer. The valuable parameter such as materials, size, and PD frequency range were discussed in this paper and can be used for early stage on designing new acoustic sensor. This detection method given some benefits on preventing the power electrical system from breakdown.

The main purpose of the earthing is to ensure that every electrical equipment, house and human are safe when lightning strikes. Lightning phenomenon occur scan produced high voltage and current ant it can caused electrical equipment damage and life danger. Therefore, this project will analyze the behavior of the soil. The main purpose of this project was to select the soil structure and the depth of the electrode suitable for grounding system in UniMAP. Additionally, this project will also analyze the soil resistance for grounding systems using MATLAB Software. From the result it can shows the best point for located grounding rod to ensure optimum grounding system.

Lightning had caused at least 25, 000 deaths worldwide each year. The study aims to investigate the induced voltage generated by lightning strikes using a lightning detector. Proteus software was employed to simulate the main board of the lightning detector before fabrication. The lightning detector was designed as a radio frequencies receiver and it was tuned to the level (300 kHz to 500 kHz) which enabled it to receive signals from lightning strikes. A lightning simulator was designed using various resistance (100 Ω to 200 Ω) to test the functionality of a lightning detector in order to validate the accuracy of the proposed model. This lightning detector could be activated whenever a small induced voltage (0.2 V and above) were generated by lightning events occurred within 10 km from the detector. This detector captures both the induced voltage and the time difference detected lightning discharge and its sound for further analysis. The time to thunder method was employed to find the estimated lightning discharges distances in parallel to this system in order to validate the current lightning detector. The accuracy of the lightning detector was found to be 88.03%.The analysed data were delivered to the user’s smartphone using cloud system

Partial discharge (PD) often begins with cracks or gas-filled voids in solid insulation or with gaseous bubbles in liquid insulation. These presences can degrade the quality of insulator. PD detection can identify these cracks at high voltage equipment such as power cables and power transformer at the early stage. One of PD detection methods is acoustic emission (AE) detection. PD produces an ultrasonic signal that can be captured by an AE sensor. The signal captured is then analysed by capturing the time of the receiving signal onto the sensor. The information related to time can be used for allocating the PD for maintenance purpose. This paper shows the influence of the distance between PD source and the AE sensor towards the arrival time of propagation wave in power transformer. In this study, the four placements of sensors were analysed by having three possible PD sources to represent the variety of distances between the PD source and the sensor. The simulated signal is generated by MATLAB and the arrival time is captured using time of arrival (TOA) method. The time captured and the distance between the PD source and arrival time showed that the relationship is proportional to one another.

Partial discharge (PD) is one of the most popular failure or breakdown that can happen at high voltage (HV) equipment. PD is the fault that causes the insulation breakdown occurred between two electrodes. It happened or occurred because of the improper insulation, ageing, environment effect and manufacturing defects. The loss of the power will affect consumer and system operation. One of the technique that can measure or detect the PD is by using ultra high frequency (UHF) method for HV equipment insulation condition monitoring and assessment. In this paper, the application of UHF method have been reviewed as the best method to detect PD in transformer, GIS and cable. The UHF method for every electrical equipment is described in order to detect the PD and the laboratory result shows that this method can be considered as suitable technique. Based on this review, the new design in UHF sensor is required in order to improve the sensitivity and bandwidth for PD detection in HV equipment. The valuable parameter such as size and PD frequency range can be used for early stage of designing new the UHF sensor.