Search

The aim of the study is to assess the efficacy and advantages of utilizing state-of-the-art three-dimensional (3D) reconstruction technology in preoperative planning for rhinoplasty surgery. It is a study of a single rhinoplasty case that was operated at a tertiary hospital. The patient was assessed through a detailed history, blood investigations, radiological investigations and preoperative 3D (three-dimensional) reconstruction of the face and nose. The study utilized high-resolution CT scans and 3D reconstruction software like 3D (three-dimensional) Slicer and Blender 3D (three-dimensional) to analyze nasal anatomy for preoperative planning in rhinoplasty. External and internal nasal measurements were taken, and axial cross-section analysis was conducted to assess nasal structure deviation. The benefits of 3D (three-dimensional) visualization in surgical planning were evaluated, and surgical management was based on preoperative reconstructions. Comprehensive preoperative evaluations were performed, adhering to ethical guidelines. Preoperative 3D (three-dimensional) reconstruction planning methods facilitated precise surgical planning and execution in rhinoplasty with satisfactory outcomes for both the patient and the surgeon. Incorporating 3D (three-dimensional) reconstruction technology in rhinoplasty preoperative planning enhances surgical precision and patient satisfaction, ensuring optimized surgical outcomes while adhering to ethical standards. [ABSTRACT FROM AUTHOR]

Elbow computerized tomography (CT) scans have been widely applied for describing elbow morphology. To enhance the objectivity and efficiency of clinical diagnosis, an automatic method to recognize, segment, and reconstruct elbow joint bones is proposed in this study. The method involves three steps: initially, the humerus, ulna, and radius are automatically recognized based on the anatomical features of the elbow joint, and the prompt boxes are generated. Subsequently, elbow MedSAM is obtained through transfer learning, which accurately segments the CT images by integrating the prompt boxes. After that, hole-filling and object reclassification steps are executed to refine the mask. Finally, three-dimensional (3D) reconstruction is conducted seamlessly using the marching cube algorithm. To validate the reliability and accuracy of the method, the images were compared to the masks labeled by senior surgeons. Quantitative evaluation of segmentation results revealed median intersection over union (IoU) values of 0.963, 0.959, and 0.950 for the humerus, ulna, and radius, respectively. Additionally, the reconstructed surface errors were measured at 1.127, 1.523, and 2.062 mm, respectively. Consequently, the automatic elbow reconstruction method demonstrates promising capabilities in clinical diagnosis, preoperative planning, and intraoperative navigation for elbow joint diseases. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the growth of the epiphyseal plate in patients with trochlea dysplasia using a 3D computed tomography (CT)-based reconstruction of the bony structure of the distal femur. The epiphysis plate was divided into a medial part and a lateral part to compare their differences in patients with trochlear dysplasia. Methods: This retrospective study included 50 patients with trochlea dysplasia in the study group and 50 age- and sex-matched patients in the control group. Based on the CT images, MIMICS was used to reconstruct the bony structure of the distal femur. Measurements included the surface area and volume of the growth plate (both medial and lateral), the surface area and capacity of the proximal trochlea, trochlea-physis distance (TPD) (both medial and lateral), and height of the medial and lateral condyle. Results: The surface area of the medial epiphyseal plate (1339.8 ± 202.4 mm2 vs. 1596.6 ± 171.8 mm2), medial TPD (4.9 ± 2.8 mm vs. 10.6 ± 3.0 mm), height of the medial condyle (1.1 ± 2.5 mm vs. 4.9 ± 1.3 mm), and capacity of the proximal trochlear groove (821.7 ± 230.9 mm3 vs. 1520.0 ± 498.0 mm3) was significantly smaller in the study group than in the control group. A significant positive correlation was found among the area of the medial epiphyseal plate, the medial TPD, the height of the medial condyle and the capacity of the proximal trochlear groove (r = 0.502–0.638). Conclusion: The medial epiphyseal plate was dysplastic in patients with trochlea dysplasia. There is a significant positive correlation between the surface area of the medial epiphyseal plate, medial TPD, height of the medial condyle and capacity of the proximal trochlear groove, which can be used to evaluate the developmental stage of the trochlea in clinical practice and to guide targeted treatment of trochlear dysplasia. Level of evidence: III. [ABSTRACT FROM AUTHOR]

Background: In addition to CT images and pathological features, many other molecular characteristics remain unknown about multiple primary lung cancer (MPLC) from intrapulmonary metastatic lung cancer. Case presentation: In this study, we reported a patient with an early-stage MPLC with both adenocarcinoma in situ (AIS) subtype and minimally invasive adenocarcinoma (MIA) subtype. The patient was diagnosed with more than 10 nodules and underwent precise surgery assisted by three-dimensional (3D) reconstruction at the left upper lung lobe. Whole-exome sequencing (WES) and multiple immunohistochemistry (mIHC) were performed to reveal the genomic profiling and tumor microenvironments of multiple nodules in this patient with MPLC. Based on 3D reconstruction location information, we found that the genomic and pathological results of adjacent lymph nodes were quite different. On the other hand, PD-L1 expression and the proportion of infiltrating lymphocytes in tumor microenvironments were all at a low status and did not vary in adjacent lymph nodes. Additionally, maximum diameter and tumor mutational burden levels were found to be significantly associated with CD8+ T cell proportion (p<0.05). Besides, CD163+ macrophages and CD4+ T cell proportion were higher in MIA nodules than in AIS nodules (p<0.05). This patient reached a recurrence-free survival of 39 months. Conclusion: Generally, in addition to CT imaging and pathological results, genomic profiling and tumor microenvironments may facilitate identifying the potential molecular mechanisms and clinical outcomes in patients with earlystage MPLC. [ABSTRACT FROM AUTHOR]

In cold climates, early-age cementitious material is easily threatened by frost damage, causing deterioration of material properties. To investigate the hazard and failure mechanism of cement paste due to early frost damage, the cement hydration process was divided into five stages via the electrical resistivity method, and then fresh cement pastes were frozen in five stages and two different temperatures, respectively. Furthermore, mechanical tests and X-ray computed tomography scanning were carried out to characterize the development of frost-related damage. The results indicated that the effect of initial frost time on strength growth is greater than that of freezing temperature, and the cement matrix can be considered completely damaged when frost-related damage occurs before the initial setting. The frost-related texture develops from outside to inside and the porosity of the sample frozen at the first three stages was higher than that of samples frozen at the last two stages. Finally, the frost-related damage could be divided into three types: flow extrusion damage, freezing expansion cracking damage, and flow extrusion-freezing expansion cracking combined damage. [ABSTRACT FROM AUTHOR]

The primary objective of the present study was to use computed tomography angiography and three-dimensional reconstruction to assess and to classify the right tracheal bronchus. Between January 2018 and October 2023, 2285 patients with pulmonary lesions were identified who underwent thin-slice computed tomography scans of the chest. The incidence of the displaced–apical bronchus–right main type was significantly greater than that of the other types (P < 0.05), the z value (the distance from the anomalous bronchial opening to the carina) of the intermediate bronchus type was significantly greater than that of the other types (P < 0.001), the ratio of the volume of the right upper lobe to the volume of the right lung decreases as the anomalous opening of the tracheal bronchus moves more superior (P < 0.01).This was the first report to categorize the right tracheal bronchus identification and classification, and to create simplified models. A unified classification and naming of the TB variant would be conducive to improving communication among clinical departments and important for reducing unnecessary medical errors. [ABSTRACT FROM AUTHOR]

The existing three-dimensional (3D) x-ray reconstruction methods for lung cancer tissue reconstruct the investigated objects based on a series of two-dimensional (2D) image sections and a chosen 3D reconstruction algorithm. However, because these procedures apply the same segmentation method for all 2D image sections, they may not achieve the optimal segmentation for each section. As a result, the reconstructed 3D images have limited spatial resolution. Furthermore, the existing 3D reconstruction method is time-consuming and results in a limited time resolution. This research presents an innovation of 3D reconstruction by reformulating two main components of the method. First, a validity index for fuzzy clustering is used to obtain the optimal segmentations of any 2D x-ray image. The process is realized by automatically determining the optimal number of clusters for the image. Second, unlike the existing 3D reconstruction methods, a fast-FCM algorithm is used to speed up the 2D image segmenting process, thereby raising the time resolution of the 3D reconstruction process. With the aid of commonly used VTK software, the proposed method has been used to visualize four classes of typical lung cancer tissues: adenocarcinoma, large cell carcinoma, small cell carcinoma, and squamous cell carcinoma. Experimental results validate the effectiveness and efficiency of the proposed algorithm. Thus, the method contributes a useful tool for x-ray-based 3D image reconstruction. [ABSTRACT FROM AUTHOR]

To further facilitate the automation and computational efficiency in asphalt mixture micromechanical simulation using finiteelement methods, this paper develops a three-dimensional (3D) microstructural modeling method for asphalt mixture to automatically generate the adaptive 3D finite-element mesh. The methodology contains three main steps, as follows: (1) two-dimensional (2D) enclosed outlines in every X-ray computed tomography (CT) image of the specimens are detected with shape features of outlines and grayscale discrepancy between each two different phase pixels; (2) for each independent geometric solid such as aggregate particle and air void in a specimen, the mapping between the solid and its outlines on various layers is established, so that the 3D model of each solid is constructed; and (3) models of the same phase are assembled into a specific substructure model. The specimen microstructure model is finally obtained with appropriate Boolean operations towards specific substructure models. Experiment results indicate that the specimen microstructure model not only has an excellent accuracy in modeling and simulation, but also supports adaptive meshing toward each specific substructure model, which significantly reduces the computational cost and can be applied to asphalt mixture numerical simulation. [ABSTRACT FROM AUTHOR]

This study aimed to use micro-computed tomography (micro-CT) imaging to evaluate the efficacy of the reciprocating and rotary systems for the removal of root filling materials in comparison with hand files. Thirty maxillary incisor teeth were prepared with ProTaper Universal (PTU) system, filled using cold lateral condensation and randomly divided into three groups of ten teeth each. The root fillings were removed with WaveOne Reciprocating and ProTaper Universal Re-treatment (PTU-R) systems and hand files. Micro-CT was used to scan the specimens before and after each treatment step. Percentage of volume of residual root filling was measured. The operating time was recorded. PTU-R instruments yielded better results for removing filling material, even though there was no statistically significant difference between PTU-R and WaveOne groups. Reciprocating and rotary systems showed similar performances in terms of efficacy and operating time for root filling removal. SCANNING 36:576-581, 2014. © 2014 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

Simple Summary: We report the first clinical use of Endosight, a new guidance system for percutaneous interventional procedures based on augmented reality, to guide percutaneous thermal ablations. The new system was demonstrated to be precise and reliable, with a targeting accuracy of 3.4 mm. Clinically acceptable, rapid setup and procedural times can be achieved. Background: Over the last two decades, augmented reality (AR) has been used as a visualization tool in many medical fields in order to increase precision, limit the radiation dose, and decrease the variability among operators. Here, we report the first in vivo study of a novel AR system for the guidance of percutaneous interventional oncology procedures. Methods: Eight patients with 15 liver tumors (0.7–3.0 cm, mean 1.56 + 0.55) underwent percutaneous thermal ablations using AR guidance (i.e., the Endosight system). Prior to the intervention, the patients were evaluated with US and CT. The targeted nodules were segmented and three-dimensionally (3D) reconstructed from CT images, and the probe trajectory to the target was defined. The procedures were guided solely by AR, with the position of the probe tip was subsequently confirmed by conventional imaging. The primary endpoints were the targeting accuracy, the system setup time, and targeting time (i.e., from the target visualization to the correct needle insertion). The technical success was also evaluated and validated by co-registration software. Upon completion, the operators were assessed for cybersickness or other symptoms related to the use of AR. Results: Rapid system setup and procedural targeting times were noted (mean 14.3 min; 12.0–17.2 min; 4.3 min, 3.2–5.7 min, mean, respectively). The high targeting accuracy (3.4 mm; 2.6–4.2 mm, mean) was accompanied by technical success in all 15 lesions (i.e., the complete ablation of the tumor and 13/15 lesions with a >90% 5-mm periablational margin). No intra/periprocedural complications or operator cybersickness were observed. Conclusions: AR guidance is highly accurate, and allows for the confident performance of percutaneous thermal ablations. [ABSTRACT FROM AUTHOR]

Precision and planning are key to reconstructive surgery. Augmented reality (AR) can bring the information within preoperative computed tomography angiography (CTA) imaging to life, allowing the surgeon to 'see through' the patient's skin and appreciate the underlying anatomy without making a single incision. This work has demonstrated that AR can assist the accurate identification, dissection and execution of vascular pedunculated flaps during reconstructive surgery. Separate volumes of osseous, vascular, skin, soft tissue structures and relevant vascular perforators were delineated from preoperative CTA scans to generate three-dimensional images using two complementary segmentation software packages. These were converted to polygonal models and rendered by means of a custom application within the HoloLens™ stereo head-mounted display. Intraoperatively, the models were registered manually to their respective subjects by the operating surgeon using a combination of tracked hand gestures and voice commands; AR was used to aid navigation and accurate dissection. Identification of the subsurface location of vascular perforators through AR overlay was compared to the positions obtained by audible Doppler ultrasound. Through a preliminary HoloLens-assisted case series, the operating surgeon was able to demonstrate precise and efficient localisation of perforating vessels. [ABSTRACT FROM AUTHOR]