Search

Abstract: A three‐dimensional numerical model was solved for a turbulent incompressible steady flow and the discrepancies and similarities between the software OpenFOAM® and ANSYS® Fluent on the flow modeling were analyzed. The evaluation was performed for the meshing, setup, and simulation step of the modeling process. Outcomes were contrasted with experimental data to validate the fluid flow obtained with both softwares. With this aim, an experimental pulse‐response technique was applied to obtain the residence time distribution (RTD) curve to be compared with the RTD curves achieved from the modeling. Additionally, images of the tracer transport in the experimental reactor were taken, showing good agreement with the computational fluid dynamics (CFD) predictions. [ABSTRACT FROM AUTHOR]

This work describes the procedure for the simulation of the operation of a photocatalytic reactor by using a multiphysics computational fluid dynamics (CFD) model based on the determination of the intrinsic kinetics parameters in an optically differential photoreactor. The model includes the rigorous description of the hydrodynamics, radiation transfer, mass transport and chemical reaction rate based on a mechanistic kinetic model. Possible existence of dead and recirculation zones has been identified from the flow field, showing a non-uniform flow through the reactor domain. The theoretical laminar profile is not reached due to the short length of the annular core and the departure from the ideal models has been quantified. The predicted velocity field has been experimentally validated with good agreement by injecting a tracer. The radiation field was simulated for slurry TiO 2 suspensions with concentrations between 0.005 and 5 g·L −1 , showing an optimum catalyst loading around 0.1–0.2 g·L −1 . Above this value, the increase in the absorption of radiation is negligible, whereas a more non-uniform radiation profile develops, keeping the most external regions of the reactor in the dark. The results of photocatalytic activity, using methanol oxidation as test reaction, showed good agreement between model predictions and experimental data, with errors between 2% and 10% depending on the catalyst concentration. The successful validation confirms not only the scientific background of the model, but also supports its applicability for engineering purposes in the design and optimization of large scale photocatalytic reactor to overcome some of limitations hindering the industrial development of this technology. [ABSTRACT FROM AUTHOR]

• Enhanced radiation transport model validated in commonly used photoreactors. • Isotropic, parallel and cone-shaped emission tested, representing common UV sources. • Increase of precision reached for sun direct light simulations. • Great improvement in LEDs simulations, from finer cone radiation and power cosine. This work presents the enhanced numerical simulation of the radiation transport in three different types of photocatalytic reactor using a novel Discrete Ordinate Method model recently developed for the open-source Computational Fluid Dynamics (CFD) platform OpenFOAM. The photoreactors represent commonly used geometries and illumination sources in the field of heterogeneous photocatalysis: an annular reactor illuminated by a mercury fluorescent lamp, a tubular reactor coupled to a compound parabolic collector illuminated by sunlight, and a tubular reactor illuminated by LEDs. Simulations were carried out for different photocatalyst concentrations, considering absorption and anisotropic scattering, showing differences smaller than 2.4% with respect to the results obtained by commercial CFD software for systems with isotropic emission, such as fluorescent lamps. Moreover, the model was able to improve the simulation of solar reactors and dramatically outperformed the simulation of LED sources, due to the combined effect of quadrature rotation and cone-limit fitting for cone-shaped sources, as well as a LED-specific power-cosine light distribution. The developed model has been thoroughly validated and is now available to the open-source CFD community. It allows a comprehensive numerical simulation of radiation transport using any type of light source, with applications in numerous engineering fields where optical phenomena affect the performance of the process. [ABSTRACT FROM AUTHOR]

• Development of a numerical simulation model for SODIS processes in flow reactors. • Coupling of solar vector calculation with radiation field resolution. • Application of mechanistic kinetic model with explicit radiation absorption effect. • Validation of the model in a tubular photoreactor coupled with a CPC reflector. • Good prediction of experimental data under both simulated and natural sunlight. A novel procedure for the simulation of solar water disinfection (SODIS) processes in flow reactors is presented. The modeling approach includes the rigorous description of hydrodynamics, radiation transfer, mass transport and bacterial inactivation phenomena within the reactor by means of a computational fluid dynamics (CFD) software. The methodology has been evaluated in a tubular reactor coupled with a compound parabolic collector (CPC). Velocity profiles have been validated versus theoretical fully developed flow, and radiation fields versus both ray tracing and experimental actinometrical measurements. Incorporation of the solar vector calculation significantly improves the model capabilities for prediction of the potential performance of the SODIS process at different geographical coordinates and operation time. A mechanistic kinetic model was used for the description of the bacterial inactivation rate with explicit radiation absorption effects, coupling the radiation field with the mass balances of viable bacterial species. Model predictions successfully reproduce the experimental data of E. coli inactivation under different irradiances of both simulated and natural solar light with a normalized root mean squared logarithmic error (NRMSLE) of 6.65% and 9.72%, respectively. Therefore, this novel methodology is confirmed as a useful tool for the scaling-up of the SODIS process to large volume systems to be installed in remote communities where safe drinking water is not available. [ABSTRACT FROM AUTHOR]