Search

In order to improve the filtration performance, silicon carbide porous ceramics with network cell wall were fabricated via the polyurethane foaming method using silicon carbide powder, alumina powder, polyether polyol, polymethylene polyphenyl polyisocyanate, dibutyltin dilaurate, triethylenediamine and silicone oil (foam stabilizer) as raw materials. The effects of the solid loadings of the slurry (45%, 50%, 55% and 60%, by mass) on the microstructure, physical properties and their filtration properties towards particu-late matters were studied. The result shows that: (1) with the increasing solid loading, the bulk density and cold compressive strength gradually increase, and the apparent porosity decreases; (2) the micropores generated during the polyurethane foaming process are distributed on the ceramic pore wall to form a network cell wall structure, which increases the collision probability between particles and the wall pores and improves the filtration efficiency; meanwhile, the network cell wall structure also improves the pore interconnectivity and reduces the press drop; (3) when the solid loading is 55%, the silicon carbide based porous ceramics have the bulk density of 0.57 g · cm-3, apparent porosity of 79.2%, cold compressive strength of 3.7 MPa, and the filtering efficiency of the paniculate matter of 91.2%, achieving good regeneration performance. [ABSTRACT FROM AUTHOR]

3D printing is the most suitable method to manufacture the frame parts of powered ankle-foot prostheses but the compressive strength of the 3D-printed part needs to be ensured. According to the compression test standard ASTM D695, the effect of infill pattern and density, which is transferred to the mass of the standard specimen, on the compressive strength is investigated with a carbon fiber-reinforced nylon material. With the same infill pattern, specimens with more mass have a higher compressive strength. With the same mass, specimens with triangular fill have a higher compressive strength than those with rectangular and gyroid fills. Compared with specimens with a solid fill, specimens with a triangular fill can also provide more compressive strength in a unit mass. According to the results of standard specimens, following the requirement of strength and lightweight, 41% triangular fill is selected to manufacture the supporting part of a powered ankle-foot prosthesis. Under a compressive load of 1225 N, the strain of the assembly of the standard adaptor and the 3D-printed part is 1.32 ± 0.04%, which can meet the requirement of the design. This study can provide evidence for other 3D-printed applications with the requirement of compressive strength. [ABSTRACT FROM AUTHOR]

In this study, novel porous LaPO 4 ceramics possessing closed spherical pores and thin pore walls have been firstly synthesized using the particle-stabilized foaming method. Affected by the calcination temperature together with solid loading, the obtained porous LaPO 4 ceramics exhibit high porosity (81.69–94.21 %), very low thermal conductivity (κ) (0.124–0.398 W m−1 K−1) and relatively high compressive strength (0.886–9.30 MPa). When the calcination temperature and solid loading are 1500 °C and 35 wt%, optimized porous LaPO 4 ceramics achieve a better balance between thermal conductivity (0.160 W m−1 K−1) and compressive strength (2.07 MPa). Based on this, the prediction model for the thermal conductivity is screened and the thermal insulating capability is further verified. This work suggests that porous LaPO 4 ceramics have the potential to be applied as thermal insulation material in the future. [ABSTRACT FROM AUTHOR]

Engineering mechanically robust ZrO2 foams with three‐dimensional (3D) reticular architecture and high porosity is extremely challenging. In current work, we presented an approach for constructing such cellular ceramics via a combined polyurethane foaming and chemical grafting method. Ester functional groups were chemically grafted on the ZrO2 powder surface to enhance its dispersibility. This approach caused the micron‐sized windows to assemble onto the cell wall of porous framework, contributing to 3D interconnected reticular architecture. The resulting products with such cellular architecture possessed a high porosity level of 89.2% and maintained an ultrahigh compressive strength of 8.5 MPa. Our results open up new opportunities for fabricating high‐performance ZrO2 foams toward practical applications. [ABSTRACT FROM AUTHOR]

Engineering highly porous SiC foams with interconnected cellular architecture and satisfactory compressive strength for the practical applications remains a challenging task. In the current work, SiC foams bonded by in-situ formed mullite phase were fabricated via polyurethane foaming using boehmite sol-coated SiC powder as the raw material. The strategy in the current work endowed the resultant products with ultrahigh porosity, interconnected pore structure, and a robust mullite bonding phase among the SiC particles. The resulting products with this cellular architecture possessed a high porosity level of 88.5% and maintained a robust compressive strength of 2.56 MPa. Our results showed that as-prepared products are promising for practical applications in the filtration, adsorption and catalytic areas. [ABSTRACT FROM AUTHOR]

Engineering high performance cellular ceramics with both ultralow density and satisfactory compressive strength for practical applications still represents a grand challenge. Herein, alumina-based cellular ceramics bonded by in-situ formed mullite phase were constructed by Al 2 O 3 –Si-boehmite particle-stabilized foams. The gelation of boehmite sol improved the stability and harnessed the deformation of dried Al 2 O 3 –Si composite foam. The oxidation of silicon and further generation of in-situ mullite phase enhanced the chemical bond between alumina particles on cell walls, resulting in the superior mechanical properties. As an exemplar, the resulting cellular ceramic possessed the robust compressive strength of 2.26 MPa at a high porosity of 87.8%. The gelation-assisted Al 2 O 3 –Si particle-stabilized foams provide a facile and convenient strategy for construction of composite ceramic foams with high porosity and robust strength. [ABSTRACT FROM AUTHOR]

Hierarchical cellular architectures hold great potential in a vast range of applications due to their superior mechanical properties and multifunctionality. In the present work, hierarchical structures composed of porous struts patterned in the form of quadrangular and triangular honeycombs were fabricated via direct foam writing (DFW) using colloidal particle‐stabilized Al2O3‐MgO‐SiO2 foams as the ink. Hydration process of MgO and subsequent formation of colloidal Mg(OH)2 network endowed the foam ink with viscoelasticity and high storage modulus. The resulting honeycombs with ultrahigh overall porosity (95.3%) and robust compressive strength (2.5 MPa) can be readily fabricated by DFW. The current work exhibits a significant step toward the scalable production of cellular ceramics with hierarchical architecture for various applications, including tissue scaffolds, catalyst supports, thermal insulation, and lightweight structures. [ABSTRACT FROM AUTHOR]

Ultralight ceramics with striking mechanical properties and improved pore connectivity could have wide applications in areas ranging from catalyst support to hot gas filtration. However, creating such materials has proven to be a challenging target. This work demonstrated a novel methodology to prepare porous MgAl 2 O 4 ceramics by calcining gelled MgO–Al 2 O 3 –SiO 2 particle-stabilized foams. The striking green strength of dried foams can be achieved as a consequence of MgO hydration and subsequent formation of gelled Mg(OH) 2 and MgO–SiO 2 –H 2 O skeleton. The decomposition of colloidal substance at elevated temperature resulted in the formation of small pores on the cell wall, thus forming the hierarchical porous architecture and improving the pore connectivity. The highly porous MgAl 2 O 4 ceramics fired at 1600°C possessed the integrated properties of ultrahigh porosity (87.0%), improved pore connectivity and satisfactory compressive strength (7.93 MPa), showing great potential to be used in multiple industrial fields. [ABSTRACT FROM AUTHOR]

Ceramic foams with significant porosity and robust mechanical properties have received extensive attentions. However, it is still difficult to achieve excellent compressive strength at high porosity levels. In this work, a gelation of foamed boehmite sol method is proposed to settle this issue. The technological parameters during preparation process are systematically investigated. As‐prepared alumina ceramic foams possess unprecedentedly high compressive strength of 34.1‐89.1 MPa at high porosity levels of 66.0%‐87.2%, which is attributed to the present of hierarchical pore structure, small grain size and pore size. This work demonstrates a facile and novel method for the fabrication of high‐performance alumina ceramic foams toward practical applications. [ABSTRACT FROM AUTHOR]

A facile strategy for the fabrication of elongated mullite reinforced porous alumina ceramics (PACs) using carbonized rice husk (CRH) as pore-forming agent and silica source is reported for the first time. A large amount of elongated mullite is synthesized in pores due to the reaction of amorphous silica in CRH skeleton and alumina ceramic powder. Elongated mullite acts as the bridges between pore walls, enhancing the compressive strength of PACs. Furthermore, secondary pores from the intersection of elongated mullite is favor of decreasing of the thermal conductivity. High performance PAC with porosity of 74.3% has been fabricated by employing 25 wt% CRH, which possesses relatively low thermal conductivity of 0.189 W/(m•K) and ultra-high compressive strength of 45 MPa. Its comprehensive performance is much better than that of existing ceramic materials. Our findings present a facile, eco-friendly and effective approach to fabricate high performance PACs as the high-temperature thermal insulation materials. [ABSTRACT FROM AUTHOR]

Abstract A facile method for preparation of SiC nanofibrous network reinforced hierarchical structured porous Si 3 N 4 based ceramics via annealing Si-Si 3 N 4 binary particle-stabilized foam in coke bed is reported in this work for the first time. The atmosphere created by coke bed enables the fabrication of Si 3 N 4 based porous ceramics at 1450 °C without using sintering additives. As prepared specimens possess a relative high compressive strength due to the partial oxidation of Si 3 N 4 particles. This novel structure with three levels of hierarchy characterized by flexible SiC nanofibrous network, cell walls and unit cells can be characterized. The vaporization of silicon powder results in formation of Si(g), SiO(g) and allows subsequent generation of SiC nanofibrous network, leading to a considerable number of micro-pores on cell walls simultaneously. As-prepared porous ceramics contained 76.7% porosity and had compressive strength of 10.81 MPa. [ABSTRACT FROM AUTHOR]

Compressive strength is one of the most important mechanical properties for ceramic foams but the dependence of compressive strength of highly porous ceramic foams on porosity remains unclear up to now, especially for the ceramic foams with porosity above 94%. In this paper, the relationship between compressive strength and porosity of ceramic foams with high porosity in the range of 79–98% was studied for the first time. The alumina ceramic foams and zirconia foams were prepared by particle-stabilized foaming method using sodium dodecyl sulfonate (SDS) as foaming agent. It was found that the function relation between compressive strength and porosity depended on porosity level. Specifically, compressive strength of ceramic foams fitted well with Rice Model when the porosity ranged from 79% to 94%. When the porosity increased above 95%, compressive strength of ceramic foams showed linear relation to porosity, which was probably due to the characteristic of highly porous ceramic foams with thin and lamellate cell wall. [ABSTRACT FROM AUTHOR]