Search

For enhancing impact characteristics, woven glass fiber epoxy laminates are reinforced with short fibers. The 6‐mm‐long slender fillers, when added up to 4% in the matrix, exhibit no influence on the flexural modulus, but at 2% they maximize the laminate's flexural strength. While the dissipation energy continues to increase up to 30 J of impact, the laminates' post‐impact load bearing capacity gets significantly affected beyond 20 J. The reinforced laminates exhibit better elastic response and enhanced damage resistance with as high as 50% reduction in the visible damage area as well as up to 35% increase in the damage initiation force. The degree of damage shows excellent correlation with the visible damage area. The distinct through thickness conical region, diverging from the impact site, is attributed to the presence of microcracks oriented along the fiber directions. The cone boundary, from where the interlaminar failure initiates, is largely the manifestation of transverse matrix cracks. While the damage cone with greater divergence indicates reduced impact resistance of the laminate, the orientation of transverse matrix cracks remains unaffected by the impact energy or the filler content. At low impact energies, the failure initiated from the fiber/matrix interfaces, coalesce to form the matrix cracks, which act as a precursor to the interlaminar failure. However, at high energy levels, several failure mechanisms simultaneously develop with no clear indication of the order of damage evolution. The short fibers enhance the laminate's impact resistance either by arresting the cracks or by developing tortuous crack path with high energy dissipation. [ABSTRACT FROM AUTHOR]

Highlights: [•] We suggested a section of a new module that would apply a large section. [•] We developed a new FRP composite girder that is filled with concrete. [•] It was confirmed the composite effect from confining concrete. [ABSTRACT FROM AUTHOR]