Search

Composite materials and their applications constitute a hot field of research nowadays due to the fact that they comprise a combination of the unique properties of each component of which they consist. Very often, they exhibit better performance and properties compared to their combined building blocks. Graphene oxide (GO), as the most widely used derivative of graphene, has attracted widespread attention because of its excellent properties. Abundant oxygen-containing functional groups on GO can provide various reactive sites for chemical modification or functionalization of GO, which in turn can be used to develop novel GO-based composites. This review outlines the most recent advances in the field of novel dyes and pigments encompassing GO as a key ingredient or as an important cofactor. The interactions of graphene with other materials/compounds are highlighted. The special structure and unique properties of GO have a great effect on the performance of fabricated hybrid dyes and pigments by enhancing the color performance of dyes, the anticorrosion properties of pigments, the viscosity and rheology of inks, etc., which further expands the applications of dyes and pigments in dyeing, optical elements, solar-thermal energy storage, sensing, coatings, and microelectronics devices. Finally, challenges in the current development as well as the future prospects of GO-based dyes and pigments are also discussed. This review provides a reference for the further exploration of novel dyes and pigments. [ABSTRACT FROM AUTHOR]

ABSTRACT Development of thin, flexible, light-weight, renewable, low-cost, and environmentally friendly electrode materials are highly feasible in era of modern disposable electronic technology. This article presents the synthesis and dielectric studies of polypyrrole (PPy) coated pulp fibers, directly collected from wasted egg holder's tray. PPy coated pulp fibers converted into compact sheet for the development of potential renewable and low-cost electrode materials. The morphology, chemical structure, and thermal stability of naked and PPy coated pulp fibril sheets were investigated by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA), respectively. PPy coated pulp fibers revealed better thermal stability and compactness of sheet morphology. Impedance measurements showed a high value of dielectric constant of 1.15 × 106 at 0.5 Hz and conductivity of 7.45 × 10−4 S/cm at room temperature for PPy coated pulp fibril sheet. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42422. [ABSTRACT FROM AUTHOR]

ABSTRACT Direct use of lignocelluloses fibers as substrate for fabrication of conductive, electroactive, biodegradable, and low-cost electrode materials are in demand for high-tech applications of ion-exchange and energy storage devices. This article presents the preparation and characterizations of conductive and electroactive lignocelluloses-polyaniline (cellulose/PANI) composite paper. Lignocelluloses fibers were directly collected from the stem of self-growing plant, Typha Angusitfolia, and subsequently coated with the conductive and electroactive layer of PANI through chemical synthesis. Individual PANI-coated lignocelluloses fibers were converted into sheet and further characterized with Scanning Electron Microscopy, Fourier Transform Infrared, Thermogravimetric Analysis, electronic conductivity, and Cyclic Voltammetry. Cellulose/PANI composite paper revealed superior thermal characteristics and used as a working electrode in three different electrolytes for ion-exchange properties. Conductive composite paper (CCP) showed the charge storage capacity of ∼52 C/g at scan rate of 5 mV/s in 2 M HCl solution. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42293. [ABSTRACT FROM AUTHOR]

In the new era of modern flexible and bendable technology, graphene-based materials have attracted great attention. The excellent electrical, mechanical, and optical properties of graphene as well as the ease of functionalization of its derivates have enabled graphene to become an attractive candidate for the construction of flexible devices. This paper provides a comprehensive review about the most recent progress in the synthesis and applications of graphene-based composites. Composite materials based on graphene, graphene oxide (GO), and reduced graphene oxide (rGO), as well as conducting polymers, metal matrices, carbon–carbon matrices, and natural fibers have potential application in energy-harvesting systems, clean-energy storage devices, and wearable and portable electronics owing to their superior mechanical strength, conductivity, and extraordinary thermal stability. Additionally, the difficulties and challenges in the current development of graphene are summarized and indicated. This review provides a comprehensive and useful database for further innovation of graphene-based composite materials. [ABSTRACT FROM AUTHOR]

Abstract: The electrochemical properties of a novel composite paper material of high surface area consisting of polypyrrole (PPy) deposited on cellulose derived from Cladophora sp. algae have been investigated in electrolytes containing different concentrations of nitrate, chloride and p-toluene sulfonate, as well as in solutions containing both p-toluene sulfonate and chloride. The oxidation mechanism and the dependence of the oxidation behavior of the polypyrrole, which was obtained by oxidation of pyrrole with iron(III) chloride, on the anion type and concentration have been studied. Current nucleation maxima, appearing at different times depending on the anion concentration, were obtained during the oxidation of the reduced polymers as a result of the combined action of the formation and growth of conducting polymer strands and anion diffusion. No loss of capacity was seen during repeated oxidation and reduction of the polymer indicating that trapping of anions in the reduced polymer did not limit the electroactivity of the present material. The latter can be explained by the thin polymer layer present on the cellulose substrate. During the oxidation of the polymer, the anions most likely first cover most of the surface of the composite before diffusing into the bulk of the polymer. The estimated distance between these surface sites was also found to match the size of the anions. For electrolytes containing a mixture of anions, the oxidation charge depends on the concentration and size of the different anions. The combination of the thin polymer coating and the large specific surface area of the composite give rise to a high ion absorption capacity even for large anions. Hence, the investigated material should be well-suited for use in biotechnological applications involving, e.g., desalting and extraction of proteins and DNA from biological samples. [Copyright &y& Elsevier]