Search

Ultrahigh performance concrete (UHPC), which is characterized by dense microstructure and strain hardening behavior, provides exceptional durability and a new level of structural response to modern structures. However, the design of the UHPC matrix often requires the use of high quantities of supplementary cementitious materials, such as silica fume, which can significantly increase the cost and elevate the production expenses associated with silica fume handling. This paper demonstrates that a fiber-reinforced composite with properties similar to conventional UHPC can be realized with very low quantities of silica fume, such as 1% by mass of cementitious materials. The proposed UHPC is based on reference Type I cement or Type V Portland cement with very low C3A (&lt, 1%) that also complies with Class H oil well cement specification, silica fume, small quantities of Al2O3 nanofibers, and high-density polyethylene or polyvinyl alcohol macro fibers. Previous research has demonstrated that nanofibers act as a seeding agent to promote the formation of compact and nanoreinforced calcium silicate hydrate (C-S-H) clusters within the interparticle and nanofiber spaces, providing a nanoreinforcing effect. This approach produces a denser and stronger matrix. This research expands upon this principle by adding synthetic fibers to ultrahigh strength cement-based composites to form a material with properties approaching that of UHPC. It is indicated that the developed material provides improved strain hardening and compressive strength at the level of 160 MPa.

Recently, silicone rubber (SiR) is preferably used in high-voltage cable accessories because it offers a wide range of voltage and temperature applications and excellent electrical and mechanical properties. Furthermore, the SiR exhibits flexibility and inhibits oxidation. In this paper, the electrical tree behavior of SiR nanocomposites containing nanoalumina and halloysite nanoclay was investigated; moreover, the nanofiller concentrations were predetermined at 0 vol%, 1 vol%, 2 vol%, and 3 vol%. The electrical tree growth was observed at room temperature at 8 kVrms after tree inception voltage (TIV). The TIV and electrical tree growth in SiR nanocomposites were monitored using an online digital monitoring system, which consisted of a stereomicroscope and a digital camera. The experimental results indicated that the addition of 1 vol%–2 vol% nanoalumina in SiR composite significantly improved the TIV and electrical tree growth rate. However, the addition of 3 vol% nanoalumina in the SiR composite reduced the TIV and accelerated the electric tree growth rate. In the presence of halloysite nanoclay of approximately 3 vol%, the SiR composite showed improved TIV and electrical tree growth rate.

In the present work, the effects of adding nanoalumina and marble dust on the wear behavior of dental composites were investigated. The hardness of dental composite was determined using Vickers micro-hardness tester. A two-body abrasive wear test was performed on the dental wear simulator under the medium of artificial saliva. The experiments were performed as per the Taguchi orthogonal array and steady state condition by varying parameters such as filler content, normal load, sliding velocity, and number of cycles. The hardness results indicated that the incorporation of 5 wt. % of nanoalumina increased the hardness of the dental composite by 12%, whereas the incorporation of 5 wt. % of marble dust increased the hardness of the dental composite by 7%. Also, for the experiments as per the Taguchi orthogonal array, the mean volumetric wear in the case of nanoalumina-filled dental composite was 9.6% less than that of marble dust-filled dental composite. However, in both the cases, the volumetric wear increased with the increase in normal load, sliding speed, and number of cycles but decreased with the increase in filler content. Analysis of variance (ANOVA) of the results indicated that normal load was less significant compared to filler content, sliding speed, and number of cycles.

An attempt was made to drift nanoalumina particles into concrete pores through electrokinetic treatment. An external electric current (current density = 3 A/m2) was applied for 3 and 15 days in reinforced concrete blocks toward steel reinforcement and microstructural characterizations (i.e. morphology observation and porosity analysis) were performed on concrete fragments of different depth from exposure surface. The morphology observation evidenced transport of nanoalumina from the exposure surface even reaching the rebar-concrete interface (up to 25–30 mm, in 15 days treatment). The porosity analysis of treated samples revealed that reduction of porosity of rebar interface was more pronounced as compared to the exposure surface and the treatment for 15 days was more beneficial for porosity refinement than treatment for 3 days. Effects of the electrokinetic NA treatment on strength of rebar-concrete interface were evaluated through pull-out test. The results showed that by increasing current density, bond strength of rebar-concrete interface increased.

The aims of the present study were to develop a dental composite filled with silanized nanoalumina and then to investigate the effect of nanoalumina filler on the two-body and three-body wear behavior under distilled water and food slurry medium, respectively. The dental composites were fabricated by adding silane treated nanoalumina filler particle in the weight percentage of (0–3 wt.%) to the matrix of BisGMA, TEGDMA, CQ and EDMAB. Two-body and three-body wear tests were performed in dental wear simulator machine with varying parameters such as normal load, chewing speed and chamber temperature in such a way as to simulate mastication process. Taguchi’s orthogonal array (L16) design, steady state condition and ANOVA were applied to evaluate the optimum parameter for minimum wear and effect of each parameter on the wear performance of dental composites. The finding of the result indicated that mean volumetric wear rate of dental composite in distilled water (i.e. two-body abrasion) was 33.23% more than that of the same composite in food slurry condition (i.e. three-body abrasion).

The aim of this study is to investigate the effect nanosilica and nanoalumina has on nanoparticle release from industrial nanocomposites due to drilling for hazard reduction whilst simultaneously obtaining the necessary mechanical performance. This study is therefore specifically designed such that all background noise is eliminated in the measurements range of 0.01 particles/cm3 and ±10% at 106 particles/cm3. The impact nano-sized SiO2 and Al2O3 reinforced polyester has on nanoparticle aerosols generated due to drilling is investigated. Real-time measurement was conducted within a specially designed controlled test chamber using a condensation particle counter (CPC) and a scanning mobility particle sizer spectrometer (SMPS). The results show that the polyester nanocomposite samples displayed statistically significant differences and an increase in nanoparticle number concentration by up to 228% compared to virgin polyester. It is shown that the nanofillers adhered to the polyester matrix showing a higher concentration of larger particles released (between 20 – 100 nm). The increase in nanoparticle reinforcement weight concentration and resulting nanoparticle release vary considerably between the nanosilica and nanoalumina samples due to the nanofillers presence. This study indicates a future opportunity to safer by design strategy that reduces number of particles released concentration and sizes without compromising desired mechanical properties for engineered polymers and composites. European Commission Life+ project named “Simulation of the release of nanomaterials from consumer products for environmental exposure assessment” (SIRENA, Pr. No. LIFE 11 ENV/ES/596). QualityNano Project through Transnational Access (TA Application VITO-TAF-382 and VITO-TAF-500) under the European Commission, Grant Agreement No: INFRA-2010-262163

Thousands of abandoned wellbores may lie within the aerial extent of a CO2 storage operation. These wellbores represent a potential leakage pathway and a leaky wellbore needs to be re-completed or otherwise repaired to restore seal integrity and ensure containment of the stored CO2. Due to the high cost of recompleting a well, a sufficient economic incentive exists if a viable seal repair technology is available. In this paper, we examine the use of epoxy nanocomposites as potential seal repair materials that have excellent bond characteristics with both steel and cement when cured in the subsurface environment. Test results show Novolac epoxy nanocomposites incorporating nanosilica, nanoclay or nanoalumina to have acceptable flowability that enable injection in wellbore cracks and significantly higher bond strength compared with standard microfine cement.

[EN] The LZS glass-ceramic (19.58 Li2O center dot 11.10ZrO(2)center dot 69.32SiO(2)) have a high coefficient thermal expansion (CTE) which can be a limitation in some applications. The addition of alumina in a LZS glass-ceramic matrix is able to reduce the CTE significantly. This happens because of the alumina affinity with respect to lithium silicates to form beta-spodumene (LiAlSi2O6), a crystalline phase having a CTE nearly zero (0.9 x 10(-6) degrees C-1).In this work, (1-5 vol%) Al2O3 nanoparticles (13 nm) were added to a LZS (3.5 mu m) glass-ceramic matrix to prepare composites with the main goal of evaluation the influence of Al2O3 on their mechanical, thermal and electrical properties. Each composition was wet homogenized and then dried at 110 degrees C for 48 h for disaggregation. The composites, sintered at 900 degrees C for 30 min, with relative densities between 92% and 98%, showed zircon and beta-spodumene as main crystalline phases. The incorporation of increasing additions of nanosized alumina progressively decreases the final density. This makes the properties to slightly decrease, also. The Young's modulus significantly decreases from 111 to 78 GPa of hardness due to the exponential variation with porosity, but the changes of toughness and hardness are much lower. The electrical conductivity was maintained within +/- 10-7 S. cm(-1), and the dielectric constant ranged from 5 to 6 for all compositions. Thermal conductivity ranged around 4.2 to 3.5 W/mK. (C) 2017 Elsevier B.V. All rights reserved., This work has been supported by CAPES in the frame of the International Cooperation Program Science without Borders for Special Visiting Researcher PVE (MEC/MCTI/CAPES/CNPq/FAPs/ No 71/2013), Project No A011/2013 (Brazil) and CNPq (National Council for Scientific and Technological Development, Brazil). This work has been also supported by Ministerio de Economia y Cornpetitividad and FEDER Funds under grant No MAT2016-67586-C3-R and grant ENE2013-49111-C2-1-R. A. Borrell acknowledges the MINECO for her Juan de la Cierva-Incorporacion contract (IJCI-2014-19839).