Search

Efficient hydrogen production relies on cost-effective and durable non-noble metal electrocatalysts for the hydrogen evolution reaction (HER). In this work, a liquid metal-assisted solid-flame combustion synthesis (SF-CS) method was used to create transition metal carbide TMC) nanocrystals with exposed facets. The TMCs include TiC, VC, NbC, TaC, Ta 2 C, WC, and Mo 2 C. In acidic solutions, the TMC nanocrystals show enhanced conductivity and superior HER performance, as evidenced by their lower Tafel slope, higher current density, and decreased overpotential. In particular, Mo 2 C nanocrystals exhibit an overpotential of 95 mV and a Tafel slope of 26 mV dec−1. These findings highlight a noteworthy improvement over previously reported nanostructures in recent years in terms of the HER properties of Mo 2 C with particular facets. This improvement is attributed to the unique surface characteristics, such as energy and active sites, which are impacted by various factors and require more investigation to meet the intended goals. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract This paper reports the preparation of Ti microparticles that are angular and spherical in shape through the combustion of a TiO 2 + αCa (where α is moles of Ca) exothermic mixture in an inert atmosphere. The relationship between the combustion parameters and the properties of the resultant Ti particles is discussed with consideration of the effect of Ca concentration. Using excess amounts of Ca in the experiment was effective in modifying the shape of the particles from angular to spherical. The Ti powder was found to be well-dispersed and the diameter of individual particles ranged from 5 µm to 50 µm. Based on the combustion parameters, the activation energy for the redox reaction was calculated as ∼ 138 kJ/mol. This paper discusses the chemistry of the reduction process and highlights the effects of combustion temperature and the amount of liquid calcium on the characteristics of the Ti particles. Graphical abstract The combustion process in TiO 2 + Ca mixture developed a maximum temperature of about 1820 °C and resulted in Ti spherical particles. fx1 [ABSTRACT FROM AUTHOR]

In this study, a single-step combustion process for the synthesis 1-D, 2-D, and 3-D micro and nanostructures of AlN was developed. The structures were grown by combustion of Al+ k AlF 3 (or ZnF 2 )+ m NH 4 Cl reaction mixture under 4.0 MPa nitrogen atmosphere. Based on experimental data, the growth conditions, morphology, and composition, optical, and thermal properties of AlN micro and nanostructures were determined. The formation of structures was associated with the combustion temperature, liquid and gas-phase reactions, and the type of additives used in the experiments. The new insight, we gleaned from this study may help in the selective growth of AlN micro and nanostructures of different morphology, enhancing their functionality. [ABSTRACT FROM AUTHOR]

In this study, we examined the effect of potassium perchlorate (KClO 4 ) and magnesium hydroxide (Mg(OH) 2 ) additives on the combustion behavior of a ZrO 2  + 2Mg mixture to produce a fine powder of zirconium metal. The results of thermodynamic analysis and experiments imply that nearly 0.04 mol of KClO 4 is needed to initiate a combustion reaction in the ZrO 2  + 2Mg system. As the amount of KClO 4 increases from 0.04 to 0.1 mol, the combustion temperature increases from 1250 to 1850 °C. This results in formation of fine zirconium powder with a typical particle size of less than 5 µm, and with 1.4–2.2 wt% residual oxygen. Subsequent reduction of particle size to 100–500 nm, and oxygen content to <1.0 wt% was achieved by adding Mg(OH) 2 . The as-prepared Zr powder was mixed with nitrocellulose and printed onto 10–100 µm thin-layers to study their burning stability. The wave propagation in a thin layer was on the order of 0.35–30 cm/s, which is suitable for applications requiring localized power generation. [ABSTRACT FROM AUTHOR]

The exothermic reduction of oxides mixture (MoO 3 +2SiO 2 ) by magnesium in NaF melt enables the synthesis of nanocrystalline MoSi 2 powders in near-quantitative yields. The combustion wave with temperature of about 1000–1200 °C was recorded in highly diluted by NaF starting mixtures. The by-products of combustion reaction (NaF and MgO) were subsequently removed by leaching with acid and washing with water. The as-prepared MoSi 2 nanopowder composed of spherical and dendritic shape particles was consolidated using the spark plasma sintering method at 1200–1500 °C and 50 MPa for 10 min. The result was dense compacts (98.6% theoretical density) possessing submicron grains and exhibiting hardness of 8.74–12.92 GPa. [ABSTRACT FROM AUTHOR]

This study deals with combustion behavior of B 2 O 3 /Mg/NH 4 Cl/C complex systems for the synthesis of amorphous boron (B), boron carbide (B 4 C), and boron nitride (BN) nanostructures. The raw mixtures used in the experiments were prepared on the base of a B 2 O 3 –Mg precursor mixture, which is sufficiently exothermic to maintain a self-propagating regime of the combustion reaction. Thermodynamic analysis of the combustion temperatures and experimental validation indicate that the 1000–1500 °C temperature range is very effective for synthesizing the nanostructures of B, B 4 C, and BN. It was found that B-containing functional nanostructures are mainly spherical nanoparticles (B) or nanosheets (B 4 C, BN). The phase composition and microstructural characteristics of the final products were evaluated based on the combustion temperature and solid/liquid phase changes. [ABSTRACT FROM AUTHOR]

A melt-assisted solid flame synthesis approach was applied to synthesize boron nanoparticles in argon gas and air atmospheres. For this purpose, we investigated the characteristics of a thermally induced combustion wave in B 2 O 3 + α Mg mixtures ( α = 1.0–1.5 mol) in argon and air atmospheres. Utilizing stoichiometrically insufficient amounts of magnesium ensured that a large portion of molten B 2 O 3 remained in the sample, which reduced the combustion parameters and favored the formation of boron nanoparticles. Under these conditions the combustion temperature and burning velocity were controlled in the range of 1300–1580 °C and 0.065–0.18 cm/s, respectively, and boron nanoparticles in a ∼20–200 nm size range were obtained. The characteristics of boron nanoparticles (morphology, purity, specific surface area, oxidation activity, etc.) were analyzed and a reaction pathway leading to boron nanoparticles synthesis was proposed. [ABSTRACT FROM AUTHOR]

Abstract: An experimental study on the preparation of zirconium silicides was conducted using ZrSiO4–Mg, ZrSiO4–SiO2–Mg and ZrSiO4–ZrO2–Mg powder mixtures by the combustion synthesis (CS) technique. Test specimens having different composition ratios including Zr:Si=1:2, 1:1, 5:4, 5:3, 2:1, and 3:1 were employed in this study. Temperature profiles relative to all the starting compositions were measured using thermocouples, and the values of the combustion parameters (combustion temperature and wave velocity) were estimated using the same. The formation of ZrSi, ZrSi2, Zr5Si3, and Zr3Si2 phases was confirmed by X-ray analysis; however, only ZrSi was produced as a single-phase product. The proposed method was also extended to synthesize spherical ZrSi particles having mean diameters of 0.2–3.0μm. A comprehensive chemical pathway to describe the sequence of chemical reactions in the combustion wave was also proposed. [ABSTRACT FROM AUTHOR]

The present study demonstrates the synthesis of fine hafnium (Hf) metal powders via a chemically activated combustion synthesis (CS) approach, which develops temperatures in the range of 1000–1600 °C. The current CS approach can be employed to obtain Hf powders with a single-crystalline hexagonal close-packed (hcp) structure in addition to high compositional uniformity and average particle sizes ranging from 0.05 to 2.0 μm. The mechanism of Hf particle formation can be understood by analyzing the process thermodynamics, including adiabatic temperatures and equilibrium reaction phases. In addition, analytical methods, including X-ray diffraction, SEM/TEM BET, FTIR, and oxygen analysis, were employed to characterize the synthesized Hf powders. Theoretical analysis was also conducted to predict the oxygen content according to Hf particle size. To the author's best knowledge, this work is the first known report demonstrating the preparation of hafnium micro- and nanopowders by the combustion synthesis method. • The combustion of HfO 2 +0.08KClO 4 + k Mg systems was studied for k = 2.7–7. • Synthesis temperatures ranging from 1570 to 1000 °C were recorded. • Hf powder with particle sizes of 0.05–2.0 μm and 0.8–2.0 wt% oxygen was obtained. • Deoxidation using a Ca/Mg alloy powder produced Hf metal with less than 0.1 wt% O 2. • A theoretical model, for predicting oxygen concentration in Hf particles is proposed. [ABSTRACT FROM AUTHOR]