Search

Hydrogen/natural gas blends fuel is considered one of the ideal alternative fuels for improving the thermal efficiency and reducing carbon emissions of rotary engine. In order to further enhance the combustion and power performance of rotary engine, a new method of the setting of bluff bodies in the cylinder was proposed. The influence of bluff-body settings in the cylinder on the combustion, power performance, and NO generation was numerically studied under different ignition timings. The results indicated that in-cylinder bluff-body settings could influence flame propagation by affecting the turbulent kinetic energy and mixture distribution during the process from the late compression stroke to the combustion stroke. Further, for any fixed bluff-body shape in the cylinder, there is a trade-off relationship between the non-blockage ratio and squish velocity at the cylinder block center section as the ignition timing is progressively advanced or delayed. Consequently, considering the above trade-off relationship, the triangular slotted bluff-body in combination with an ignition timing of 30° CA (BTDC) could be used to achieve the maximum improvement in the combustion and power performance of rotary engine. The peak pressure exhibited a growth of 4.83%, and the indicated mean effective pressure increased by 1.46%. • Using hydrogen/natural gas blend fuel to reduce carbon emissions from the rotary engine. • A novel in-cylinder bluff-body structure in the rotary engine is proposed. • Systematic study of in-cylinder bluff-body effects on the combustion process. • A trade-off relationship influenced by the bluff body is identified. • The optimal structure of the bluff-body is provided for improving performance. [ABSTRACT FROM AUTHOR]

This work aimed to numerically study the effect of hydrogen injection strategy on mixture formation and combustion process in a port injection (PI) rotary engine fueled with natural gas/hydrogen blends. The two main considered factors were hydrogen injection timing (IT) and hydrogen injection duration (ID). Simulation results indicated that for mixture formation, in terms of hydrogen IT, hydrogen IT of 390°CA (BTDC) is a watershed. When the hydrogen IT is before 390°CA (BTDC), the changes in hydrogen IT have little effect on the hydrogen distribution at ignition timing. Hydrogen distribution is uniform across the whole combustion chamber. However, when the hydrogen IT is after 390°CA (BTDC), with the retarded hydrogen IT, there is obvious increase in hydrogen stratification phenomenon, and more hydrogen distributes in the middle and back of combustion chamber at ignition timing. In terms of hydrogen ID, at the fixed hydrogen IT of 360°CA (BTDC), with the extended hydrogen ID, more hydrogen distributes in the back of trailing spark plug (TSP). For combustion process, to obtain a higher overall combustion rate for the PI rotary engine, the hydrogen injection strategy should make more hydrogen located at the front of TSP at ignition timing. In engineering applications, for higher peak cylinder pressure to be obtained, the continued optimization of hydrogen IT should be selected between 390°CA (BTDC) and 330°CA (BTDC). Under the hydrogen IT range of 390°CA (BTDC) to 330°CA (BTDC), the continued optimization of hydrogen ID should select between 8°CA and 24°CA. [ABSTRACT FROM AUTHOR]

This work aimed to numerically study the effect of hydrogen injection strategies on mixture formation and combustion process in a hydrogen direct injection plus natural gas port injection (HDI + NGPI) rotary engine. Two major factors, namely hydrogen injection timing (HIT) and hydrogen injection angle (HIA), were considered. Four HITs which were used in simulation, were from the early stages of intake stroke to the late stages of compression stoke. Comparing the fuel movement and combustion process among the four HITs with three HIAs (−60°, 0° and 60°), it was found that for hydrogen movement, when the HIT was at early stages of intake stroke, this advanced HIT led to the fact that the hydrogen distribution areas at ignition timing all spread across the whole combustion chamber for all three HIA cases. When the HIT was at the late stages of the intake stroke and the whole compression stroke, with an increased hydrogen injection angle (HIA) (from −60°, 0° to 60°), the hydrogen accumulation area moved from the front towards the rear of combustion chamber. In addition, with retarded HIT, the hydrogen aggregation degree increased continuously. For combustion process, to obtain a higher overall combustion rate, the hydrogen injection strategy should make as much hydrogen spread between the two spark plugs at ignition timing. In addition, the hydrogen concentration near the LSP and the TSP should be conducive to the flame kernel formation. This is mainly because of the fact that the above hydrogen distributions, not only lead to the rapid formation of the flame kernel near the LSP and the TSP, but also make use of the hydrogen at the early stage of combustion stroke. Under the computational condition, the overall combustion rate for case A: 140 − 60 which had a HIT of 140°CA (BTDC) and a HIA of −60°CA, was the fastest. Compared with case C: 300 + 60 which had a HIT of 300°CA (BTDC) and a HIA of 60°CA, the peak pressure of case A: 140 − 60 was raised by 31.1%. However, compared with other cases, the NO emissions of case A: 140 − 60 at 80°CA (ATDC) was the maximum. Furthermore, for engineering applications, this study also provided a scheme of the change of the optimum HIA under different HITs for improving the performance of the HDI + NGPI rotary engine. [ABSTRACT FROM AUTHOR]

Hydrogen direct injection (HDI) in cylinder is considered as an effective method to improve natural gas engine performance. The present study aims to bridge the gap on the HDI in rotary engine, and to investigate the effect of hydrogen injection timing (IT) and hydrogen injection duration (ID) on mixture formation and combustion process of a hydrogen direct injection plus natural gas port injection (HDI + NGPI) rotary engine. Numerical approach was used in this study for obtaining some critical information, which was difficult to obtain through experiment, such as flow field, fuel distribution and some intermediate concentration fields in cylinder. The research results showed that for mixture formation, the distribution law of the hydrogen and the natural gas at the late stages of the compression stroke (100 ° CA (BTDC)), was as follows: at a fixed ID of 24 ° CA, with retarded hydrogen IT, the stratification phenomenon of hydrogen became obvious increasingly, and the hydrogen distribution area moved towards the back of the combustion chamber continuously. At a fixed IT of 210 ° CA (BTDC), with the extension in ID, the accumulation area of hydrogen reduced significantly, and the hydrogen continued to gather in the middle of the combustion chamber. For combustion process, the overall combustion rate for the hydrogen injection strategy which had an IT of 210 ° CA (BTDC) and ID of 40 ° CA (case ID5), was the fastest. This was due to the fact that compared with the leading spark plug (LSP), the combustion condition around the trailing spark plug (TSP) has a great influence on the combustion process. For case ID5 at ignition timing, the hydrogen concentration near the TSP is high enough for the rapid formation of flame kernel. Compared with case IT1 which had an IT of 390 ° CA (BTDC) and an ID of 24 ° CA, the improved combustion rate of case ID5 had a 11.7% increase in peak pressure, and a 7% decrease in NO emissions. [ABSTRACT FROM AUTHOR]

• The NHBF was used to improve the combustion and emission performance of rotary engine. • A calculation model of a peripheral ported rotary engine considering ASL was established. • The mixture formation and combustion process of NHBF under the action of ASL were analyzed. • The ideal blend fuel distribution which can improve the combustion efficiency was given. • The optimized hydrogen injection strategy was provided for improving the engine performance. Natural gas/hydrogen blended fuel (NHBF) is considered to be one of the ideal alternative fuels for rotary engine, which can effectively reduce the carbon emission of the rotary engine. The purpose of this paper is to numerically study the influence of hydrogen injection timing (HIT) and hydrogen injection angle (HIA) on mixture formation, flame propagation, and NO emission in the cylinder. In addition, considering that the apex seal leakage (ASL) of rotary engine is difficult to avoid, the NHBF in the cylinder will inevitably leak from the apex seal leakage gap to the adjacent cylinders. Therefore, the NHBF leakage under the action of ASL should be considered. In this paper, a 3D dynamic model of the NHBF rotary engine considering the action of ASL was established. Further, the diffusion and combustion processes of NHBF in the cylinder with different HITs and HIAs were calculated. The results showed that the HIT and HIA can significantly change the flame propagation process by changing the fuel stratification pattern in the cylinder. For improving the combustion efficiency of the engine, the HIA of +45° and HIT of 155°CA (BTDC) adopted by Case:155 + 45 should be set as the hydrogen injection strategy. This is mainly because that for Case: 155 + 45, both natural gas and hydrogen are mainly distributed in the FOC, and the concentration of hydrogen and natural gas near the spark plug is also high. However, the defect of Case:155 + 45 is the significant increase of NO emission. [ABSTRACT FROM AUTHOR]