Search

Cooperation among kin is common in animal societies. Kin groups may form by individuals directly discriminating relatives based on kin recognition cues, or form passively through natal philopatry and limited dispersal. We describe the genetic landscape for a primitively eusocial wasp, Polistes dominula, and ask whether individuals choose cooperative partners that are nearby and/or that are genetic relatives. Firstly, we genotyped an entire sub-population of 1361 wasps and found genetic structuring on an extremely fine scale: the probability of finding genetic relatives decreases exponentially within just a few meters of an individual’s nest. At the same time, however, we found a lack of genetic structuring between natural nest aggregations within the population. Secondly, in a separate dataset where ~2000 wasps were genotyped, we show that wasps forced experimentally to make a new nest choice tended to choose new nests near to their original nests, and that these nests tended to contain some full sisters. However, a significant fraction of wasps chose nests that did not contain sisters, despite sisters being present in nearby nests. Although we cannot rule out a role for direct kin recognition or natal nest-mate recognition, our data suggest that kin groups may form via a philopatric rule-of-thumb, whereby wasps simply select groups and nesting sites that are nearby. The result is that most subordinate helpers obtain indirect fitness benefits by breeding cooperatively. [ABSTRACT FROM AUTHOR]

Introduction: In this paper we perform a replication analysis of “Effect of a cash transfer programme for schooling on prevalence of HIV and herpes simplex type 2 in Malawi: a cluster randomised trial” by Sarah Baird and others published in “The Lancet” in 2012. The original study was a two-year cluster randomized intervention trial of never married girls aged 13–22 in Malawi. Enumeration areas were randomized to either an intervention involving cash transfer (conditional or unconditional of school enrollment) or control. The study included 1708 Malawian girls, who were enrolled at baseline and had biological testing for HIV and herpes simplex virus type 2 (HSV-2) at 18 months. The original findings showed that in the cohort of girls enrolled in school at baseline, the intervention had an effect on school enrollment, sexual outcomes, and HIV and HSV-2 prevalence. However, in the baseline school dropout cohort, the original study showed no intervention effect on HIV and HSV-2 prevalence. Methods: We performed a replication of the study to investigate the consistency and robustness of key results reported. A pre-specified replication plan was approved and published online. Cleaned data was obtained from the original authors. A pure replication was conducted by reading the methods section and reproducing the results and tables found in the original paper. Robustness of the results were examined with alternative analysis methods in a measurement and estimation analysis (MEA) approach. A theory of change analysis was performed testing a causal pathway, the effect of intervention on HIV awareness, and whether the intervention effect depended on the wealth of the individual. Results: The pure replication found that other than a few minor discrepancies, the original study was well replicated. However, the randomization and sampling weights could not be verified due to the lack of access to raw data and a detailed sample selection plan. Therefore, we are unable to determine how sampling influenced the results, which could be highly dependent on the sample. In MEA it was found that the intervention effect on HIV prevalence in the baseline schoolgirls cohort was somewhat sensitive to model choice, with a non-significant intervention effect for HIV depending on the statistical model used. The intervention effect on HSV-2 prevalence was more robust in terms of statistical significance, however, the odds ratios and confidence intervals differed from the original result by more than 10%. A theory of change analysis showed no effect of intervention on HIV awareness. In a causal pathway analysis, several variables were partial mediators, or potential mediators, indicating that the intervention could be working through its effect on school enrollment or selected sexual behaviors. Conclusions: The effect of intervention on HIV prevalence in the baseline schoolgirls was sensitive to the model choice; however, HSV-2 prevalence results were confirmed. We recommend that the results from the original published analysis indicating the impact of cash transfers on HIV prevalence be treated with caution. [ABSTRACT FROM AUTHOR]

This paper investigates a well-known complex combinatorial problem known as the vehicle routing problem with time windows (VRPTW). Unlike the standard vehicle routing problem, each customer in the VRPTW is served within a given time constraint. This paper solves the VRPTW using an improved artificial bee colony (IABC) algorithm. The performance of this algorithm is improved by a local optimization based on a crossover operation and a scanning strategy. Finally, the effectiveness of the IABC is evaluated on some well-known benchmarks. The results demonstrate the power of IABC algorithm in solving the VRPTW. [ABSTRACT FROM AUTHOR]

Classical null hypothesis significance tests are not appropriate in corpus linguistics, because the randomness assumption underlying these testing procedures is not fulfilled. Nevertheless, there are numerous scenarios where it would be beneficial to have some kind of test in order to judge the relevance of a result (e.g. a difference between two corpora) by answering the question whether the attribute of interest is pronounced enough to warrant the conclusion that it is substantial and not due to chance. In this paper, I outline such a test. [ABSTRACT FROM AUTHOR]

Two critical tasks in multi-criteria group decision making (MCGDM) are to describe criterion values and to aggregate the described information to generate a ranking of alternatives. A flexible and superior tool for the first task is q-rung orthopair fuzzy number (qROFN) and an effective tool for the second task is aggregation operator. So far, nearly thirty different aggregation operators of qROFNs have been presented. Each operator has its distinctive characteristics and can work well for specific purpose. However, there is not yet an operator which can provide desirable generality and flexibility in aggregating criterion values, dealing with the heterogeneous interrelationships among criteria, and reducing the influence of extreme criterion values. To provide such an aggregation operator, Muirhead mean operator, power average operator, partitioned average operator, and Archimedean T-norm and T-conorm operations are concurrently introduced into q-rung orthopair fuzzy sets, and an Archimedean power partitioned Muirhead mean operator of qROFNs and its weighted form are presented and a MCGDM method based on the weighted operator is proposed in this paper. The generalised expressions of the two operators are firstly defined. Their properties are explored and proved and their specific expressions are constructed. On the basis of the specific expressions, a method for solving the MCGDM problems based on qROFNs is then designed. Finally, the feasibility and effectiveness of the method is demonstrated via a numerical example, a set of experiments, and qualitative and quantitative comparisons. [ABSTRACT FROM AUTHOR]

Objectives: Professional sporting organisations invest considerable resources collecting and analysing data in order to better understand the factors that influence performance. Recent advances in non-invasive technologies, such as global positioning systems (GPS), mean that large volumes of data are now readily available to coaches and sport scientists. However analysing such data can be challenging, particularly when sample sizes are small and data sets contain multiple highly correlated variables, as is often the case in a sporting context. Multicollinearity in particular, if not treated appropriately, can be problematic and might lead to erroneous conclusions. In this paper we present a novel ‘leave one variable out’ (LOVO) partial least squares correlation analysis (PLSCA) methodology, designed to overcome the problem of multicollinearity, and show how this can be used to identify the training load (TL) variables that influence most ‘end fitness’ in young rugby league players. Methods: The accumulated TL of sixteen male professional youth rugby league players (17.7 ± 0.9 years) was quantified via GPS, a micro-electrical-mechanical-system (MEMS), and players’ session-rating-of-perceived-exertion (sRPE) over a 6-week pre-season training period. Immediately prior to and following this training period, participants undertook a 30–15 intermittent fitness test (30-15IFT), which was used to determine a players ‘starting fitness’ and ‘end fitness’. In total twelve TL variables were collected, and these along with ‘starting fitness’ as a covariate were regressed against ‘end fitness’. However, considerable multicollinearity in the data (VIF >1000 for nine variables) meant that the multiple linear regression (MLR) process was unstable and so we developed a novel LOVO PLSCA adaptation to quantify the relative importance of the predictor variables and thus minimise multicollinearity issues. As such, the LOVO PLSCA was used as a tool to inform and refine the MLR process. Results: The LOVO PLSCA identified the distance accumulated at very-high speed (>7 m·s-1) as being the most important TL variable to influence improvement in player fitness, with this variable causing the largest decrease in singular value inertia (5.93). When included in a refined linear regression model, this variable, along with ‘starting fitness’ as a covariate, explained 73% of the variance in v30-15IFT ‘end fitness’ (p<0.001) and eliminated completely any multicollinearity issues. Conclusions: The LOVO PLSCA technique appears to be a useful tool for evaluating the relative importance of predictor variables in data sets that exhibit considerable multicollinearity. When used as a filtering tool, LOVO PLSCA produced a MLR model that demonstrated a significant relationship between ‘end fitness’ and the predictor variable ‘accumulated distance at very-high speed’ when ‘starting fitness’ was included as a covariate. As such, LOVO PLSCA may be a useful tool for sport scientists and coaches seeking to analyse data sets obtained using GPS and MEMS technologies. [ABSTRACT FROM AUTHOR]

This paper considers the DCSK system under jamming environment. We consider both fast and slow switching pulse jamming (PJ). We derive approximations of the system bit error rates (BERs) in analytic expressions containing only well-known special functions, from which we show that for both jamming cases increasing the spreading factor can enhance the BER. In addition, we reveal that under the fast switching PJ, the BER does not depend on the jamming duty cycle ρ when ρ ≤ 0.5, however when ρ > 0.5, increasing its value degrades the BER. Moreover, we find out that under the slow switching PJ, increasing ρ may either enhance or degrade the BER. [ABSTRACT FROM AUTHOR]

Managing the biodiversity extinction crisis requires wise decision-making processes able to account for the limited resources available. In most decision problems in conservation biology, several conflicting objectives have to be taken into account. Most methods used in conservation either provide suboptimal solutions or use strong assumptions about the decision-maker’s preferences. Our paper reviews some of the existing approaches to solve multi-objective decision problems and presents new multi-objective linear programming formulations of two multi-objective optimization problems in conservation, allowing the use of a reference point approach. Reference point approaches solve multi-objective optimization problems by interactively representing the preferences of the decision-maker with a point in the criteria (objectives) space, called the reference point. We modelled and solved the following two problems in conservation: a dynamic multi-species management problem under uncertainty and a spatial allocation resource management problem. Results show that the reference point method outperforms classic methods while illustrating the use of an interactive methodology for solving combinatorial problems with multiple objectives. The method is general and can be adapted to a wide range of ecological combinatorial problems. [ABSTRACT FROM AUTHOR]

The 3D orientation of clasts within a deposit are known to be informative on processes that formed that deposit. In archaeological sites, a portion of the clasts in the deposit are introduced by non-geological processes, and these are typically systematically recorded in archaeological excavations with total stations. By recording a second point on elongated clasts it is possible to quickly and precisely capture their orientation. The statistical and graphical techniques for analyzing these data are well published, and there is a growing set of actualistic and archaeological comparative data to help with the interpretation of the documented patterns. This paper advances this area of research in presenting methods to address some shortcomings in current methodologies. First, a method for calculating confidence intervals on orientation statistics is presented to help address the question of how many objects are needed to assess the formation of a deposit based on orientations. Second, a method for assessing the probability that two assemblages have different orientations is presented based on permutations testing. This method differs from existing ones in that it considers three-dimensional orientations rather than working separately with the two-dimensional bearing and plunge components. Third, a method is presented to examine spatial variability in orientations based on a moving windows approach. The raw data plus the R code to build this document and to implement these methods plus those already described by McPherron are included to help further their use in assessing archaeological site formation processes. [ABSTRACT FROM AUTHOR]

Code-based cryptography is one of few alternatives supposed to be secure in a post-quantum world. Meanwhile, identity-based identification and signature (IBI/IBS) schemes are two of the most fundamental cryptographic primitives, so several code-based IBI/IBS schemes have been proposed. However, with increasingly profound researches on coding theory, the security reduction and efficiency of such schemes have been invalidated and challenged. In this paper, we construct provably secure IBI/IBS schemes from code assumptions against impersonation under active and concurrent attacks through a provably secure code-based signature technique proposed by Preetha, Vasant and Rangan (PVR signature), and a security enhancement Or-proof technique. We also present the parallel-PVR technique to decrease parameter values while maintaining the standard security level. Compared to other code-based IBI/IBS schemes, our schemes achieve not only preferable public parameter size, private key size, communication cost and signature length due to better parameter choices, but also provably secure. [ABSTRACT FROM AUTHOR]

Muirhead mean (MM) is a well-known aggregation operator which can consider interrelationships among any number of arguments assigned by a variable vector. Besides, it is a universal operator since it can contain other general operators by assigning some special parameter values. However, the MM can only process the crisp numbers. Inspired by the MM’ advantages, the aim of this paper is to extend MM to process the intuitionistic fuzzy numbers (IFNs) and then to solve the multi-attribute group decision making (MAGDM) problems. Firstly, we develop some intuitionistic fuzzy Muirhead mean (IFMM) operators by extending MM to intuitionistic fuzzy information. Then, we prove some properties and discuss some special cases with respect to the parameter vector. Moreover, we present two new methods to deal with MAGDM problems with the intuitionistic fuzzy information based on the proposed MM operators. Finally, we verify the validity and reliability of our methods by using an application example, and analyze the advantages of our methods by comparing with other existing methods. [ABSTRACT FROM AUTHOR]

In this paper we present a three-dimensional (3D) morphometrical assessment of human tibia sexual dimorphism based on whole bone digital representation. To detect shape–size and shape differences between sexes, we used geometric morphometric tools and colour-coded surface deviation maps. The surface-based methodology enabled analysis of sexually dimorphic features throughout the shaft and articular ends of the tibia. The overall study dataset consisted of 183 3D models of adult tibiae from three Czech population subsets, dating to the early medieval (9–10th century) (N = 65), early 20th century (N = 61) and 21st-century (N = 57). The time gap between the chronologically most distant and contemporary datasets was more than 1200 years. The results showed that, in all three datasets, sexual dimorphism was pronounced. There were some sex-dimorphic characteristics common to all three samples, such as tuberosity protrusion, anteriorly bowed shaft and relatively larger articular ends in males. Diachronic comparisons also revealed substantial shape variation related to the most dimorphic area. Male/female distinctions showed a consistent temporal trend regarding the location of dimorphic areas (shifting distally with time), while the maximal deviation between male and female digitized surfaces fluctuated and reached the lowest level in the 21st-century sample. Sex determination on a whole-surface basis yielded the lowest return of correct sex assignment in the 20th-century group, which represented the lowest socioeconomic status. The temporal variation could be attributed to changes in living conditions, the decreasing lower limb loading/labour division in the last 12 centuries having the greatest effect. Overall, the results showed that a surface-based approach is successful for analysing complex long bone geometry. [ABSTRACT FROM AUTHOR]

Data analysis and model-data comparisons in the environmental sciences require diagnostic measures that quantify time series dynamics and structure, and are robust to noise in observational data. This paper investigates the temporal dynamics of environmental time series using measures quantifying their information content and complexity. The measures are used to classify natural processes on one hand, and to compare models with observations on the other. The present analysis focuses on the global carbon cycle as an area of research in which model-data integration and comparisons are key to improving our understanding of natural phenomena. We investigate the dynamics of observed and simulated time series of Gross Primary Productivity (GPP), a key variable in terrestrial ecosystems that quantifies ecosystem carbon uptake. However, the dynamics, patterns and magnitudes of GPP time series, both observed and simulated, vary substantially on different temporal and spatial scales. We demonstrate here that information content and complexity, or Information Theory Quantifiers (ITQ) for short, serve as robust and efficient data-analytical and model benchmarking tools for evaluating the temporal structure and dynamical properties of simulated or observed time series at various spatial scales. At continental scale, we compare GPP time series simulated with two models and an observations-based product. This analysis reveals qualitative differences between model evaluation based on ITQ compared to traditional model performance metrics, indicating that good model performance in terms of absolute or relative error does not imply that the dynamics of the observations is captured well. Furthermore, we show, using an ensemble of site-scale measurements obtained from the FLUXNET archive in the Mediterranean, that model-data or model-model mismatches as indicated by ITQ can be attributed to and interpreted as differences in the temporal structure of the respective ecological time series. At global scale, our understanding of C fluxes relies on the use of consistently applied land models. Here, we use ITQ to evaluate model structure: The measures are largely insensitive to climatic scenarios, land use and atmospheric gas concentrations used to drive them, but clearly separate the structure of 13 different land models taken from the CMIP5 archive and an observations-based product. In conclusion, diagnostic measures of this kind provide data-analytical tools that distinguish different types of natural processes based solely on their dynamics, and are thus highly suitable for environmental science applications such as model structural diagnostics. [ABSTRACT FROM AUTHOR]

Graphlets are small subgraphs, usually containing up to five vertices, that can be found in a larger graph. Identification of the graphlets that a vertex in an explored graph touches can provide useful information about the local structure of the graph around that vertex. Actually finding all graphlets in a large graph can be time-consuming, however. As the graphlets grow in size, more different graphlets emerge and the time needed to find each graphlet also scales up. If it is not needed to find each instance of each graphlet, but knowing the number of graphlets touching each node of the graph suffices, the problem is less hard. Previous research shows a way to simplify counting the graphlets: instead of looking for the graphlets needed, smaller graphlets are searched, as well as the number of common neighbors of vertices. Solving a system of equations then gives the number of times a vertex is part of each graphlet of the desired size. However, until now, equations only exist to count graphlets with 4 or 5 nodes. In this paper, two new techniques are presented. The first allows to generate the equations needed in an automatic way. This eliminates the tedious work needed to do so manually each time an extra node is added to the graphlets. The technique is independent on the number of nodes in the graphlets and can thus be used to count larger graphlets than previously possible. The second technique gives all graphlets a unique ordering which is easily extended to name graphlets of any size. Both techniques were used to generate equations to count graphlets with 4, 5 and 6 vertices, which extends all previous results. Code can be found at and . [ABSTRACT FROM AUTHOR]