Search

Filamentous phage f1 is exported from its Escherichia coli host without killing the bacterial cell. Phage-encoded protein pIV, which is required for phage assembly and secretion, forms large highly conductive channels in the outer membrane of E. coli. It has been proposed that the phage are extruded across the bacterial outer membrane through pIV channels. To test this prediction, we developed an in vivo assay by using a mutant pIV that functions in phage export but whose channel opens in the absence of phage extrusion. In E. coli lacking its native maltooligosacharride transporter LamB, this pIV variant allowed oligosaccharide transport across the outer membrane. This entry of oligosaccharide was decreased by phage production and still further decreased by production of phage that cannot be released from the cell surface. Thus, exiting phage block the pIV-dependent entry of oligosaccharide, suggesting that phage occupy the lumen of pIV channels. This study provides the first evidence, to our knowledge, for viral exit through a large aqueous channel.

Filamentous phage f1 exits its Escherichia coli host without killing the bacterial cell. It has been proposed that f1 is secreted through the outer membrane via a phage-encoded channel protein, pIV. A functional pIV mutant was isolated that allowed E. coli to grow on large maltodextrins and rendered E. coli sensitive to large hydrophilic antibiotics that normally do not penetrate the outer membrane. In planar lipid bilayers, both mutant and wild-type pIV formed highly conductive channels with similar permeability characteristics but different gating properties: the probability of the wild-type channel being open was much less than that of the mutant channel. The high conductivity of pIV channels suggests a large-diameter pore, thus implicating pIV as the outer membrane phage-conducting channel.

A family of homomultimeric outer-membrane proteins termed secretins mediates the secretion of large macromolecules such as enzymes and filamentous bacteriophages across bacterial outer membranes to the extracellular milieu. The secretin encoded by filamentous phage f1 was purified. Mass determination of individual molecules by scanning transmission electron microscopy revealed two forms, a unit multimer composed of about 14 subunits and a multimer dimer. The secretin is roughly cylindrical and has an internal diameter of about 80 angstroms, which is large enough to accommodate filamentous phage (diameter of 65 angstroms).

Filamentous phage f1 encodes protein IV (pIV), a protein essential for phage morphogenesis that localizes to the outer membrane of Escherichia coli, where it is found as a multimer of 10 to 12 subunits. Introduction of internal His or Strep affinity tags at different sites in pIV interfered with its function to a variable extent. A spontaneous second-site suppressor mutation in gene IV allowed several different insertion mutants to function. The identical mutation was also isolated as a suppressor of a multimerization-defective missense mutation. A high-molecular-mass pIV species is the predominant form of pIV present in cells. This species is stable in 4% sodium dodecyl sulfate at temperatures up to 65 degrees C and is largely preserved at 100 degrees C in Laemmli protein sample buffer containing 4% sodium dodecyl sulfate. The suppressor mutation makes the high-molecular-mass form of wild-type pIV extremely resistant to dissociation, and it stabilizes the high-molecular-mass form of several mutant pIV proteins to extents that correlate with their level of function. Mixed multimers of pIV(f1) and pIV(Ike) also remain associated during heating in sodium dodecyl sulfate-containing buffers. Thus, sodium dodecyl sulfate- and heat-resistant high-molecular-mass pIV is derived from pIV multimer and reflects the physiologically relevant form of the protein essential for assembly-export.

Filamentous phages are small, highly evolved parasites that can reproduce and disseminate without killing their host. During assembly, virion proteins are transferred from the host membrane to the single-stranded DNA phase genome and simultaneously secreted from the cell. Filamentous phage assembly shares certain features with bacterial processes responsible for the assembly of cell-surface structures and for extracellular protein secretion.

The filamentous phage protein pIV is required for assembly and secretion of the virus and possesses regions homologous to those found in a number of Gram-negative bacterial proteins that are essential components of a widely distributed extracellular protein-export system. These proteins form multimers that may constitute an outer membrane channel that allows phage/protein egress. Three sets of f1 gene IV mutants were isolated at positions that are absolutely (G355 and P375) or largely (F381) conserved amongst the 16 currently known family members. The G355 mutants were non-functional, interfered with assembly of pIV+ phage, and made Escherichia coli highly sensitive to deoxycholate. The P375 mutants were non-functional and defective in multimerization. Many of the F381 mutants retained substantial function, and even those in which charged residues had been introduced supported some phage assembly. Some inferences about the roles of these conserved amino acids are made from the mutant phenotypes.

Filamentous phage pIV is an outer membrane protein required for phage assembly and secretion. Chemical cross-linking and sedimentation experiments have been used to demonstrate that pIV from f1-infected Escherichia coli exists as a homo-multimer, probably composed of 10 to 12 subunits. pIV secreted from spheroplasts remains soluble and does not form multimers. Synthesis of pIV from distantly related filamentous phages or from a bacterial homolog that participates in a specialized form of extra-cellular protein secretion in the same cell with pIVf1 resulted in the formation of mixed multimers. This suggests that the homologous proteins themselves form homo-multimers. These structures could form gated channels that conduct assembling phage or specific substrate proteins across the outer membrane to the extracellular milieu.

The gene IV protein of filamentous bacteriophages is an integral membrane protein required for phage assembly and export. A series of gene IV::phoA fusion, gene IV deletion, and gene IV missense mutations have been isolated and characterized. The alkaline phosphatase activity of the fusion proteins suggests that pIV lacks a cytoplasmic domain. Cell fractionation studies indicate that the carboxy-terminal half of pIV mediates its assembly into the membrane, although there is no single, discrete membrane localization domain. The properties of gene IV missense and deletion mutants, combined with an analysis of the similarities between pIVs from various filamentous phage and related bacterial export-mediating proteins, suggest that the amino-terminal half of pIV consists of a periplasmic substrate-binding domain that confers specificity to the assembly-export system.

Filamentous phage proteins pI and pIV are morphogenetic proteins required for phage assembly but not part of the virion. Neither pI nor pIV from the related phages f1 and IKe can substitute for its equivalent in the other phage. When the two proteins are supplied as pairs, however, partial restoration of heterologous phage assembly occurs. This observation strongly suggests that the two proteins interact. A selection for revertants of a temperature sensitive mutant of f1 gene IV resulted in the isolation of a suppressor mutation in gene I. This suppressor is allele specific, and thus supports the hypothesis that pI and pIV interact. A selection for IKe phage that can efficiently utilize paired pI and pIV from from f1 led to the isolation of a phage with a mutation in gene VIII, which encodes the major coat protein of the virus. Analysis of the system suggests that it is pI that interacts with both pIV and pVIII. Thus the process by which filamentous phage are concomitantly assembled and secreted across the cell membranes is likely to involve a series of protein-protein interactions that are accessible to genetic analysis.

The intergenic region in the genome of the Ff class of filamentous phage (comprising strains fl, fd and M13) genome constitutes 8% of the viral genome, and has essential functions in DNA replication and phage morphogenesis. The functional domains of this region may be inserted into separate sites of a plasmid to function independently. Here, we demonstrate the construction of a plasmid containing, sequentially, the origin of (+)-strand synthesis, the packaging signal and a terminator of (+)-strand synthesis. When host cells harboring this plasmid (pLS7) are infected with helper phage they produce a microphage particle containing all the structural elements of the mature, native phage. The microphage is 65 A in diameter and about 500 A long. It contains a 221-base single-stranded circle of DNA coated by about 95 copies of the major coat protein (gene 8 protein).

The filamentous phage f1 and IKe infect a common host, are structurally highly similar and exhibit 55% identity at the DNA sequence level. Based on the idea that proteins that function autonomously will be more tolerant of multiple amino acid differences than proteins that must interact with other proteins to function, the ability of four individual proteins from f1 to substitute for their IKe equivalents to promote virus assembly in vivo has been examined. The reciprocal replacements were also examined. Only the single-strand DNA binding proteins (pV) were fully interchangeable. A minor capsid protein, pIX, was unable to substitute in assembly of the heterologous phage. Two proteins required for particle assembly that are not part of the phage particle, pI and pIV, were not interchangeable, although pIVf1 stimulated formation of a very small number of IKe particles in the absence of pIVIKe. The lack of interchangeability suggests that these morphogenetic proteins do not function autonomously, but rather interact with one or more phage proteins. The ability of certain overproduced proteins to interfere with assembly of wild-type f1 or IKe forms the basis for a model that suggests that phage assembly requires an interaction between pI and pIV.

The filamentous phage-encoded gene IV protein is required at high levels for virus assembly, although it is not a constituent of the virion. It is an integral membrane protein that does not contain an extended hydrophobic region of the kind often required for stable integration in the inner membrane. Rather, like a number of Escherichia coli outer membrane proteins, pIV is rich in charged amino acid residues and is predicted to consist of extensive beta-sheet structures. In phage-producing cells, pIV is primarily detected in the outer membrane, while in cells that produce it from the cloned gene, pIV is found in both the inner and outer membranes. The protein is synthesized as a precursor. Following cleavage of the signal sequence and translocation into the periplasm, the mature form is initially found as a soluble species. Soluble pIV then integrates into the membrane with a half-time of one to two minutes. Neither phage assembly nor other phage proteins are needed for this membrane integration, and phage assembly does not require the presence of the soluble form. The gene IV protein may be part of the structure through which the assembling phage is extruded.

Filamentous phage infection induces the synthesis of large amounts of an Escherichia coli protein, phage shock protein (Psp), the product of a previously undescribed gene. This induction is due to the phage gene IV protein, pIV, an integral membrane protein. The uninduced level of Psp is undetectable, but when induced by prolonged synthesis of pIV, it can become one of the most abundant proteins in the cell. Psp is also synthesized transiently in response to several stresses (heat, ethanol, and osmotic shock). High-level synthesis occurs only after extreme treatment. Unlike the members of the heat shock regulon, Psp induction does not require the heat shock sigma factor, sigma 32; some stimuli that elicit sigma 32-dependent heat shock proteins do not induce Psp synthesis. The level of Psp induction after extreme stress is even higher in sigma 32 mutant cells, which are unable to mount a normal heat shock response, suggesting that these parallel stress responses are interrelated.

Three new 9-aminoacridine (9AA) resistant mutations of bacteriophage T4D have been isolated and characterized. Two of the mutations, rs and rc, have identical patterns of acridine resistance, but they map on opposite sides of the rII region. In addition, rs has an effect on the plaque morphology of r mutations, whereas rc does not. The third mutation, ama, maps very close to rs but exhibits a different pattern of resistance to 9AA. None of the three is resistant to acridines by virtue of reduced permeability. Taken together with other mutations that have been previously characterized, these new mutations permit us to set the minimum number of acridine-sensitive processes in T4 development at four.

Functional half-life measurements of the bacteriophage T4 gene 32 messenger RNA indicate that this mRNA is extremely stable. Regulation of gene 32 expression at the transcriptional level cannot account for the rapidity with which P32 synthesis can be repressed. Furthermore, derepression of P32 synthesis occurs in the presence of rifampicin, a drug which inhibits transcriptional initiation. In addition, T4-infected cultures in which P32 expression is repressed possess almost as much gene 32 mRNA as derepressed cultures. We conclude that expression of the T4 gene 32 protein is regulated at the level of translation.

An Escherichia coli mutant which does not support the growth of filamentous bacteriophage fl allows phage fl DNA synthesis and gene expression in mutant cells, but progeny particles are not assembled. The mutant cells have no other obvious phenotype. On the basis of experiments with phage containing nonlethal gene I mutations and with mutant fl selected for the ability to grow on mutant bacteria, we propose an interaction between the morphogenetic function encoded by gene I of the phage and the bacterial function altered in this mutant. The bacterial mutation defines a new gene, fip (for filamentous phage production), located near 84.2 min on the E coli chromosome.

Morphogenesis of filamentous phage includes synthesis of the phage major coat protein in precursor form, its insertion into the host cell plasma membrane, its cleavage to the mature form of the protein, and its assembly there into virions. The M13 mutant am8H1R6 encodes a coat protein in which leucine replaces glutamic acid as residue 2 of the mature protein [Boeke, J. D., Russel, M. & Model, P. (1980) J. Mol. Biol. 144, 103-116]. The coat protein precursor produced by this variant is a poor substrate for the Escherichia coli signal peptidase both in vivo and in vitro. This pre-coat protein, which is eventually processed and assembled into viable phage particles, is associated with the membrane fraction of the infected cell. We conclude that the domain recognized by the signal peptidase extends beyond the signal peptide itself. Furthermore, membrane association and signal peptide cleavage can be separated temporally under conditions that permit membrane insertion, cleavage, and phage assembly.

The assembly of filamentous bacteriophages has been studied in cells infected by wild-type and mutant phage; host mutants defective in bacteriophage assembly have also been isolated. Phage assembly takes place at the membrane, and requires insertion of the viral major coat protein. We present data on the physiology of this process and on the effects of amino acid sequence variations near to the coat protein amino terminus on membrane insertion, processing, and phage assembly.

Sequence comparisons show that the fip gene product of Escherichia coli, which is required for filamentous phage assembly, is thioredoxin. Thioredoxin serves as a cofactor for reductive processes in many cell types and is a constituent of phage T7 DNA polymerase. The fip-1 mutation makes filamentous phage and T7 growth temperature sensitive in cells that carry it. The lesion lies within a highly conserved thioredoxin active site. Thioredoxin reductase (NADPH), as well as thioredoxin, is required for efficient filamentous phage production. Mutant phages defective in phage gene I are particularly sensitive to perturbations in the fip-thioredoxin system. A speculative model is presented in which thioredoxin reductase, thioredoxin, and the gene I protein interact to drive an engine for filamentous phage assembly.

We show, using a simple, rapid fractionation method, that the precursor to the filamentous phage major coat protein is an integral membrane protein. The method, which consists of treatment of Escherichia coli with 0.1 N NaOH followed by centrifugation, leaves a subset of inner and outer membrane proteins in the NaOH pellet. Most proteins partition into the NaOH pellet (membrane) or supernatant (cytoplasm and periplasm) in a manner consistent with their subcellular location as determined by more conventional techniques. We find no evidence for cytoplasmic filamentous phage pre-coat protein in either wild-type of mutant-infected cells. Our evidence suggests that a protein identified as "soluble procoat" by K. Ito, G. Mandell and W. Wickner may be the amber fragment of a different phage protein.

Gene cloning in plasmid vectors that contain a filamentous phage intergenic region presents several advantages. However, technical difficulties have been a problem, primarily low yields of packaged single stranded (ss) plasmid DNA from the rapid, small scale procedures usually employed, and ambiguities in sequencing reactions attributed to the contamination by helper phage ss DNA. We report here the construction and some properties of a new f1 helper phage. Using this phage, R408, plasmid ss DNA is packaged and exported preferentially over phage ss DNA, and the absolute yield of plasmid ss DNA is usually increased.

The gene 32 protein of the bacteriophage T4 plays an important role in genetic recombination, DNA repair, and DNA replication; the protein functions in these processes by virtue of a strong binding capacity for single-stranded DNA. During infections of Escherichia coli by bacteriophage carrying amber of temperature-sensitive mutations in gene 32, the altered gene 32 protein (that is, the amber fragment of the missense polypeptide) is synthesized at greatly elevated rates. During infections by phages that are mutant in other genes (and wild type in gene 32), gene 32 expression is coupled to the quantity of single-stranded DNA produced during the infection. The data are consistent with a model in which the gene 32 protein binds preferentially to all available single-stranded DNA. When all available single-stranded DNA is complexed with gene 32 protein, free gene 32 protein represses its own synthesis. The high level expression of altered gene 32 proteins (amber fragments or missense polypeptides) is a direct consequence of the proposed autoregulation.

Filamentous particles containing single-stranded plasmid and bacteriophage DNA are able to infect F- Escherichia coli at frequencies of approximately 10(-6). This infection is dependent on an intact particle and requires the products of the tolQ, tolR, and tolA genes of the bacteria. The addition of CaCl2 can increase the frequency about 100-fold, presumably by increasing the concentration of particles at the bacterial surface.

Filamentous phage assembly in vivo shows an absolute requirement for thioredoxin and a partial requirement for thioredoxin reductase. Mutants in which one or both of the active site cysteine residues of thioredoxin were changed to alanine or serine were constructed and shown to support filamentous phage assembly. Some of the mutants were almost as effective as wild-type thioredoxin, while others supported phage assembly only when high levels of the mutant protein were present in the infected cell. The mutant proteins were all inactive in an assay which couples oxidation of NADPH to reduction of 5,5'-dithiobis-2-nitrobenzoic acid) via thioredoxin reductase and thioredoxin. These active site mutants make phage assembly completely independent of thioredoxin reductase, which suggests that the phage needs, and the active site mutants provide, the proteins in the reduced conformation. Other mutants were isolated on the basis of their failure to support filamentous phage growth. These specified mutant thioredoxin proteins with varying levels of redox activity in vivo and in vitro. The locations of these mutations suggest that the surface of thioredoxin thought to interact with thioredoxin reductase also interacts with the filamentous phage assembly machinery. An in vivo assay for thioredoxin redox function, based on the ability of cells to utilize methionine sulfoxide, was developed. Met- cells containing mutant thioredoxins that are inactive in vitro do not form colonies on plates containing methionine sulfoxide as the sole methionine source.

To determine whether the fip gene of Escherichia coli, which is required for filamentous phage assembly, is required for cell viability, we replaced the chromosomal copy of the gene with an inactive copy introduced on a plasmid. We found that the fip gene is dispensable. The method we devised, which should be generally useful, was also tested with an inactivated rho gene. As expected, the rho gene is essential.