Search

The robust non-singular fast terminal sliding mode (NFTSM) controller is adopted in this work to solve the problem of tracking trajectory of a mobile manipulator (MM) suffering from uncertainties. The NFTSM method has the capability to ensure convergence rate and to provide good tracking accuracy and robustness against external perturbations and parameter uncertainties (total disturbances). However, the NFTSM controller needs high discontinuous gain to reject the effect of strong disturbances, which results in vibrations in the steady-state and chattering in the control law. To solve these issues, an extended state observer–based NFTSM technique is proposed for n -degree of freedom (DoF) coupling MM. The proposed method is designed to approximate and compensate in real-time the uncertainties. It also ensures robustness against total disturbances, good convergence rate, and good tracking accuracy. The stability of the proposed control is also verified based on the Lyapunov theory. Experimental works are conducted on a 5-degree-of-freedom (5-DoF) MM where the results obtained demonstrate the effectiveness of the developed technique and prove the stability of the closed-loop system. [ABSTRACT FROM AUTHOR]

This work takes advantage of synergetic control theory and fractional calculus to develop and propose fractional synergetic control (FSC) strategy for Four Degrees of Freedom (4-DOF) robot manipulator. The proposed fractional synergetic control is designed to track a joint space as well as workspace desired trajectories. Fractional calculus gives more flexibility in the design since it has a wider stability region. Added to that, as stated in the literature, compared to a similar approach such as sliding mode control, the synergetic control approach converges faster to the equilibrium point, without chattering with a fast response. This paper proposes a new control strategy that takes advantage of fractional calculus and synergetic control theory. This proposed control strategy is tested experimentally on a 4-DOF manipulator to study the performance of the proposed control scheme. The stability of the closed-loop system is proved using the Lyapunov approach. The experimental results have shown that the proposed FSC design has achieved a good tracking performance. [ABSTRACT FROM AUTHOR]

Summary: This paper presents an advanced robust active disturbance rejection control (ADRC) for flexible link manipulator (FLM) to track desired trajectories in the joint space and minimize the link's vibrations. It has been shown that the ADRC technique has a very good disturbance rejection capability. Both the internal dynamics and the external disturbances can be estimated and compensated in real time. The proposed robust ADRC control law is developed to solve the problems existing in the original version of the ADRC related to the disturbance estimation errors and the variation of the parameters. Indeed, these parameters cannot be included in the existing disturbances and then be estimated by the extended state observer. The proposed control law is based on the sliding mode technique, which considers the uncertainties in the control gains and disturbance estimation errors. Lyapunov theory is used to prove the closed-loop stability of the system. The proposed control strategy is simulated and tested experimentally on one FLM. The effect of the observer bandwidth on the system performance is simulated and studied to select the best values of the bandwidth frequency. The simulation and experimental results show that the proposed robust ADRC has better performance than the traditional ADRC. [ABSTRACT FROM AUTHOR]

Summary: Trajectory tracking of a mobile manipulator in the Cartesian space based on decentralized control is considered in this paper. The dynamic model is first rearranged to take the form of two interconnected subsystems with constraint flow, namely, a nonholonomic mobile platform subsystem and a holonomic manipulator subsystem. Secondly, using the inverse kinematics, the workspace desired trajectory of the mobile manipulator is transformed to the manipulator joint space as well as the platform desired trajectory. The kinematic control is developed from the desired trajectory of the platform. Then, the desired velocity is derived using the kinematic controller of the mobile platform, after which the velocity is used to obtain the control law of the mobile platform subsystem. Thirdly, the control law of the manipulator subsystem is developed based on the desired and real values of the manipulator, as well as the desired velocity. According to the Lyapunov stability theory, the proposed decentralized control strategy guarantees the global stability of the closed-loop system, and the tracking errors are bounded. Experimental results obtained on a 3-DOF manipulator mounted on a mobile platform are given to demonstrate the feasibility and effectiveness of the proposed approach. This is confirmed by a comparison with the computed torque approach. [ABSTRACT FROM AUTHOR]