Search

Sensitive clay subjected to cyclic loading may experience gradual loss of its shear strength, which may lead to liquefaction. Foundations built on this clay would suffer extensive settlement and significant loss of bearing capacity or perhaps catastrophic failure. This paper presents an experimental investigation on sensitive (Champlain) clay obtained from the city of Rigaud, Quebec (Canada). Consolidation tests, static and cyclic undrained and drained triaxial tests were performed on representative samples of this clay. The objective of this investigation was to examine the influence of the physical and mechanical parameters, which govern the shear strength of sensitive clay subjected to cyclic loading. Based on the results of the present investigation and those available in the literature, it can be reported herein that the undrained response is the most critical for these foundations; furthermore, the preconsolidation pressure is considered as an important parameter in establishing the shear strength of sensitive clay. A design procedure is developed to determine the safe zone for the undrained and drained responses, within which a combination of the cyclic deviator stress and the number of cycles for a given soil/loading/site conditions can achieve a quasielastic resilient state without reaching failure. The proposed design procedure is applicable to all regions around the world, where sensitive clays can be found. Furthermore, this procedure can be adopted to examine the conditions of existing foundations built on sensitive clay at any time during its lifespan. [ABSTRACT FROM AUTHOR]

The preconsolidation pressure and overconsolidation ratio profiles are the most important factors related to the mechanical behaviour of clay deposits. They are interpreted on the basis of a limited number of laboratory tests, but the near-continuous information provided by the piezocone can allow local data to be extrapolated to an entire site. Numerous methods have been proposed for relating piezocone data to preconsolidation pressure and the overconsolidation ratio, but their validity is still uncertain. In this paper, nine methods are compared on the basis of data collected on 31 sensitive clay sites in Quebec whose preconsolidation pressure profiles are well known. Each method is briefly presented and the most promising are identified. The simplest method, which directly relates preconsolidation pressure to net tip resistance, also appears to be the most effective.Key words: clay, preconsolidation pressure, overconsolidation ratio, piezocone, correlations.Les profils de pression de préconsolidation et du rapport de surconsolidation constituent les éléments les plus importants en ce qui concerne le comportement mécanique des dépôts argileux. Leur évaluation se fait par un nombre limité d'essais de laboratoire, mais les données fournies par le piézocône de manière presque continue peuvent permettre une extrapolation à l'ensemble du site de ces données locales. De nombreuses méthodes ont été proposées pour corréler les données du piézocône et la pression de préconsolidation ou le rapport de surconsolidation mais leur validité est encore incertaine. Dans le présent article, neuf méthodes sont examinées à partir de données provenant de 31 sites d'argile sensible de la province du Québec pour lesquels les profils de pression de préconsolidation sont bien connus. Chaque méthode est brièvement présentée et les méthodes les plus intéressantes sont identifiées. Il semble que la relation entre la pression de préconsolidation et la résistance en pointe nette, qui est la plus simple, est aussi la plus efficace.Mots clés : argile, pression de préconsolidation, rapport de surconsolidation, piézocône, corrélations. [ABSTRACT FROM AUTHOR]