Search

Nowadays, researchers have been on the lookout for eco-sustainable additives such as agro/industrial waste in concrete in order to offset the carbon footprint created by cement manufacturing. However, it has been said that the use of agro/industrial-waste-based cementitious materials in concrete improves its quality. However, this study compared the performance of hydrated lime and cement concrete replaced with 5% and 10% Costus englerianus bagasse ash and bagasse fibre for determining the mechanical properties (compressive and flexural strength). Moreover, compressive strength was evaluated on cubical specimens and flexural strength was evaluated on beam samples at 7, 14, and 28 days, respectively. Results showed that the compressive strength and flexural strength of the concretes increased with an increase in the curing age. Also, the compressive and flexural strengths of cement concrete were recorded by 65.38 MPa and 10.86 MPa at 0% bagasse ash or fibre, which performed better than concrete replaced with 5% and 10% bagasse ash and fibre at 28 days, respectively. Besides, the compressive strength of concrete was noted by 53.85 MPa and 48.92 MPa at 10% bagasse ash and 10% bagasse fibre, respectively, while the flexural strength was calculated by 6.86 MPa and 5.54 MPa at 10% bagasse ash and 10% bagasse fibre, respectively, which were higher than that of concrete produced with hydrated lime alone at 28 days. Thus, bagasse ash performed better than bagasse fibre ash as a partial replacement of cement or hydrated lime in concrete production. Therefore, Costus englerianus bagasse ash or bagasse fibre improved the performance of hydrated lime concrete at 5–10% replacement, but higher concrete strength would be obtained in cement replacement than hydrated lime.

In the present era, a number of researchers are using either industrial or agricultural priceless products as a basic source of raw materials for the construction industry. These waste products are economical and helpful in producing a sustainable environment and reducing environmental pollution, which is called handling waste products. However, this research work was conducted on concrete containing 0.25%, 0.50%, 0.75%, and 1% of jute fiber as reinforcement material and 10%, 20%, 30%, and 40% of wheat straw ash (WSA) as replacement for fine aggregates. Moreover, the separate and combined effect of jute fiber and WSA as a replacement for sand ingredient in concrete is to determine the fresh and hardened properties of concrete. In this research, a number of concrete samples were prepared with 1 : 1.5 : 3 mix proportion at 0.54 water-cement ratio and cured at 28 days. The experimental outcomes displayed that the compressive, splitting tensile, and flexural strengths improved by 32.88 MPa, 3.80 MPa, and 5.30 MPa at 0.50% of jute fiber along with 30% of WSA at 28 days consistently. Similarly, the modulus of elasticity was developed while the dosages of jute fiber and WSA increased together in concrete. Moreover, the permeability and workability of concrete were reduced while utilized jute fiber and WSA increased together in concrete.

Over the last decade, there has been a surge in research into possible cement substitute materials in concrete that are environmentally friendly, cost-effective, and socially beneficial. The alternatives include industrial and agricultural wastes, and their potential advantages can be achieved through recycling, repurposing, and renewing processes. With the use of these wastes as additional and replacement materials, significant energy savings and a reduction in cement use can be achieved, which helps to reduce carbon dioxide (CO2) emissions in the environment. Therefore, the use of rice husk ash (RHA) and wheat straw ash (WSA) as ternary cementitious material (TCM) in concrete can help reduce the impact on the environment and minimize the use of Portland cement (PC) in the concrete mixture. This research work is performed on the concrete blended with 0%, 5%, 10%, 15%, and 20% of RHA and WSA as TCM in the mixture. However, the purpose of this experimental work is to investigate the influence of RHA and WSA as TCM on the fresh (slump), physical (water absorption and density), and hardened properties (compressive strength, splitting tensile strength, and flexural strength) and drying shrinkage of concrete. In this regard, a total of 240 concrete samples (cylinders, cubes, and beams) were prepared with 1 : 2 : 4 mix proportions at 0.50 water-cement ratio and cured at 7 and 28 days, respectively. Moreover, the workability of green concrete is getting reduced as the quantity of TCM increases in the mixture. Besides, the compressive strength, splitting tensile strength, and flexural strength are enhanced by 12.65%, 9.40%, and 9.46% at 10% of TCM (5% RHA and 5% WSA) on 28 days consistently. Furthermore, the density and water absorption of concrete are reduced with the increase in the dosages of TCM on 28 days, respectively. In addition, the drying shrinkage is reduced with the increase in the quantity of TCM in concrete.

The growing demand for cement has created a significant impact on the environment. Cement production requires huge energy consumptions; however, Pakistan is currently facing a severe energy crisis. Researchers are therefore engaged with the introduction of agricultural/industrial waste materials with cementitious properties to reduce not only cement production but also energy consumption, as well as helping protect the environment. This research aims to investigate the influence of binary cementitious material (BCM) on fresh and hardened concrete mixes prepared with metakaolin (MK) and ground granulated blast furnace slag (GGBFS) as a partial replacement of cement. The replacement proportions of BCM used were 0%, 5%, 10%, 15%, and 20% by weight of cement. A total of five mixes were prepared with 1 : 1.5 : 3 mix proportion at 0.54 water-cement ratios. A total of 255 concrete specimens were prepared to investigate the compressive, tensile, and flexural strength of concrete after 7, 28, and 56 days, respectively. It was perceived that the workability of concrete mixes decreased with an increasing percentage of MK and GGBFS. Also, the density and permeability of concrete decreased with an increasing quantity of BCM after 28 days. Conversely, the compressive, tensile, and flexural strength of concrete were enhanced by 12.28%, 9.33%, and 9.93%, respectively, at 10% of BCM after 28 days. The carbonation depth reduced with a rise in content of BCM (up to 10%) and then later improved after 28, 90, and 180 days. Moreover, the effect of chloride attack in concrete is reduced with the inclusion of BCM after 28 and 90 days. Similarly, the drying shrinkage of concrete decreased with an increase in the content of BCM after 40 days.

In present status quo, number of researcher are working on waste materials as potential supplement for any of the constituent of concrete to cope with sustainable development. As, the ingredients which constitute the body and give strength to concrete are natural available limited material and has to deplete one day. Thus, there is desperately need of alternate that may replace the limited natural resources. In this regard, this study focuses the rice husk ash (waste stuff) as partial replacement of cement and its possible impact on strength of concrete. In addition, this research work also this research work is conducted to investigate the effect of water-cement ratio on the strength of concrete at 10% partially replacement of Rice husk ash (RHA) by the weight of cement. RHA is a mineral admixture obtained by burning husk at certain temperature. Since as per pervious researches, the physical and chemical properties of RHA are very reactive Pozzolans and possess binding properties so can be used as cement supplement. Therefore, for laboratory experimental work, total 144 cubical and 72 cylindrical. In this research, number of concrete specimens were cast and tested at 1:2:4 mix ratio with various w/c ratios i.e. 0.45, 0.50 and 0.60. Further, at each specified water-cement ratio, two mechanical properties (compressive and splitting tensile strength) were determined in Universal Testing Machine (UTM). These physical properties of concrete were investigated at 7, 14, 28 and 56 days curing period. The experimental results show that the compressive strength gets increased up to 14.51% and tensile splitting test strength increased up to 10.71% at the w/c ratio of 0.45. The workability of plain fresh concrete at all w/c ratios is slightly greater than the workability of concrete blended with 10% RHA. Thus, RHA improves the properties of concrete when used in specific amount. As a result, it can reduce the overall cost of construction and it will reduce the adverse environmental effect.