Search

This paper focuses on seismic fragility and damage scenario assessment of minor Italian historical centres through the development of urban fragility curves. With reference to the case study of Balvano, a small centre located in Basilicata Region of Italy, two hybrid models have been adopted. The first is a mechanic-based hybrid model developed by the authors to derive urban fragility curves specifically; the second is the macroseismic method, originally conceived to derive typological fragility curves for single building classes, expanded to derive urban fragility curve herein. Balvano was strongly struck by 1980 Irpinia-Basilicata earthquake (Ms = 6.90) and hence subjected to an intense reconstruction process during 1980s, where almost the 80% of the buildings were reconstructed with reinforced concrete structures in the place of unreinforced masonry ones. Seismic vulnerability and damage scenarios before and after 1980 have been assessed and compared with the purpose of validating the effectiveness of the urban scale fragility curves obtained through hybrid methodologies and quantifying the effect of the ‘new’ seismic hazard maps and first seismic codes and recommendations released by the Italian Government in the aftermath of 1980 for the construction of new buildings or for retrofitting the existing ones. A good matching between predicted and occurred damage scenario from the research outcomes emerged, confirming the effectiveness of the urban scale hybrid fragility curves to assess seismic vulnerability at urban scale. Moreover, the comparison of the damage scenarios pre and post-reconstruction highlighted the crucial role played by the code prescriptions adopted in that years for reducing the seismic vulnerability of the municipality and the importance of the ‘new’ seismic hazard maps introduced in 1980s. Finally, the differences between mechanical-based hybrid and macroseismic model have been discussed in the paper.

This paper investigates the role of the horizontal axial force on the in-plane shear and flexural strength of masonry spandrels subjected to seismic actions. Strength criteria included in the main national and international codes take into account for geometrical and material properties, but valuable considerations about the influence of the horizontal axial force are missing. Nevertheless, experimental programs and post-earthquake damage scenarios proved that the horizontal axial force within the spandrels can be also significant under seismic actions, especially when they are surrounded by strength and stiff vertical piers or when significantly compressed by the effect of tensile-resistant elements. As main purpose, the strength criteria proposed by the Italian code for the spandrels have been revised accounting for the effect of the horizontal axial force on its shear and flexural strength. A database containing experimental tests conducted on masonry spandrels was elaborated and used to compare experimental with theoretical results. Outcomes showed that the revised criteria match satisfactorily the experimental results when significant axial forces affect the spandrels, both in terms of strength and failure mechanism. Contrariwise, existing code formulations are representative for the spandrels subjected to low axial force such that rocking or pure shear mechanisms tend to prevail.

Seismic capacity assessment of existing buildings is of paramount importance for mitigating the seismic risk in earthquake-prone areas. In Europe, the next version of Eurocode 8 and the current version of the Italian standards suggest the adoption of both linear and nonlinear approaches to perform seismic analyses of existing masonry buildings. This paper discusses with the main issues concerning linear and nonlinear analyses methodologies provided by the Italian standards for existing unreinforced masonry buildings. An historical building located in Southern Italy, representative of the Mediterranean basin buildings, has been chosen as a case study and modelled through the equivalent frame model. According to the Italian standards, the influence of in-plane stiffness of floors and spandrels on the overall seismic capacity of the structure has been considered in the analyses. Beyond the code prescriptions, the effect of different ultimate drifts values assumed for the spandrels on nonlinear behavior of the structure has been analysed. The results of two types of linear analyses (lateral static force method and modal response spectrum analysis) have been compared among them and with those provided by the nonlinear static method. Conclusions show that either behavior and overstrength factors provided by the Italian standards are conservative than those estimated through the nonlinear static analyses. Moreover, it has been remarked that the value of ultimate drift adopted for the spandrel can affect significantly the nonlinear response of the structures, although this topic still represents an open issue.

This paper presents a benchmark exercise for the seismic assessment of unreinforced masonry (URM) buildings as a follow-up of a blind prediction test organized in the context of the European Conference of Earthquake Engineering Series. The blind prediction exercise was aimed at better defining the open issues in current procedures for modeling and performing seismic analysis of URM buildings, by highlighting the uncertainty that can influence the results. This work presents an overview of the approaches used by different research teams and the scope of predictions. The benchmark structure was a three-story building with traditional European architecture from which two Cases were considered: A) stone masonry walls and flexible horizontal diaphragms and B) brick masonry walls and rigid horizontal diaphragms. A wide range of approaches was used by the participating teams concerning modeling strategies, methods of analysis and criteria for the attainment of limit states, which are here addressed as potential sources for the dispersion of predictions. The results were compared in terms of capacity curves, predicted failure mechanisms compatible with the fulfillment of limit states of near collapse and damage limitation, and related minimum values of peak ground acceleration (PGA). The results show an overall good agreement for damage patterns and collapse mechanisms in both benchmark structures, presenting some differences in the type of failure mode and its extent. However, the scatter of predicted capacity curves and critical PGAs is very high, especially for the Case with brick masonry and rigid diaphragms, indicating that clearer procedures in the building codes are required for professionals., This work was partly financed by FCT/MCTES through national funds (PIDDAC) under the R&D Unit Institute for Sustainability and Innovation in Structural Engineering (ISISE), under reference UIDB/04029/2020.

In 2007 the Italian National Research Council published the technical document CNR-DT 206/2007 “Instructions for the design, execution and control of timber structures”, with the purpose to provide a technical support to the operators of the sector, in line with the most advanced knowledge at that time. Since then, the world of timber engineering has largely used such document, even though the instructions are not mandatory standard rules, so that they became the most common tool in Italy for the structural use of timber, opening the markets and favouring competition and new applications. In latest years new studies, researches and innovative proposals have promoted the development and the growth of timber constructions also in the civil residential field. The framework of standard rules for constructions and products, both Europeans and Italians, has evolved too. For these reasons, CNR has considered as opportune to proceed to the editing of a new version, updated and widened, namely with the acronym DT 206-R1. The document comes from the spontaneous cooperation of an open group of specialists and operators of the sector, based on a wide discussion on the common scientific and technical expertise and knowledge. The current version has already taken into account the results of the public inquiry phase (concluded by now). The paper presents the main contents of the document, evidencing the innovations.

This paper provides a comphrensive review of the critical aspects of nonlinear modeling for evaluating the seismic response of masonry structures, emphasizing the issues relevant to engineering practice. Currently, the specialized technical community shares the opinion that, for a performance-based approach, numerical models are the only tools sufficiently effective to support the seismic assessment of existing buildings. However, their potential often falls short when attempting to accurately describe the behavior of masonry structures. In fact, these structures feature highly complex architectural configurations, different masonry types, and various structural solutions, meaning that extra care is required in numerical modeling. This is especially true when the modelers do not have a solid background in the software chosen and may not be practiced using the vast variety of options offered by the software houses. They are often unaware of the consequences that questionable modeling choices may have on the results obtained by the models. These extremely complex topics are treated in the paper from an engineering practice perspective, providing an in-depth overview of the challenging issues related to the use of different modeling strategies. The paper covers strategies ranging from the Equivalent Frame approach (widelyused in common engineering practice) to more refined techniques like 2D and 3D FiniteElement procedures based on continuous, discrete, and micro-mechanical approaches. Critical aspects in the modeling of both in- and out-of-plane responses of masonry, as well as the critical issues in wall-to-wall connections and diaphragm roles are investigated. All the examined issues are clarified through numerical examples highlighting also how a consistent and integrated use of different procedures may be beneficial. Finally, some of most relevant challenging issues concerning the use of numerical models in seismic assessment with the nonlinear static approach are presented and discussed.

This paper presents a novel hybrid-based methodology devoted to develop urban fragility curves and damage probability matrices to predict likelihood seismic damage scenarios for small and medium Italian urban centres, considering URM buildings only. The concept of urban fragility curve consists of a single curve mean-representative of the seismic fragility of an entire area accounting for the combinations of building classes and their percentage, then they differ from those typological. The methodology has been developed with reference to Rocca di Mezzo, a small Italian urban centre located in the central Apennine area, Italy. Based on CarTiS inventory, building classes have been firstly recognized and urban fragility curves, representative for damage scenarios at Ultimate Limit State, developed. To predict damage scenarios from low to high-intensity earthquakes, an approach to define multi-damage urban fragility curves and damage probability matrices has been also presented. To this aim, a damage scale suffered by building classes has been defined by converting the final outcomes of the AeDES form (used in Italy for post-earthquake surveys) in the damage levels provided by the European Macroseismic Scale (EMS98). Data coming from urban fragility curves have been compared with the actual damage scenario recorded in Rocca di Mezzo after the 2009 L’Aquila’s earthquake, in terms of both peak-ground acceleration and Mecalli-Cancani-Sieberg scale. The achieved results showed a good accordance between theoretical predictions and actual damage scenarios, coherent also with the damage scenarios occurred in other Italian historical centres hit by severe earthquakes over the years. Thus, the methodology can provide a first important indicator to support the development of emergently plans devoted to identify priority of interventions in such areas particularly vulnerable with respect to others.

This paper investigates the potentials of inter-story isolation systems (IIS) for retrofitting irregular masonry buildings by means of an isolated vertical addition realised on the roof of the existing structure. By assuming a case study, a wide parametric analysis is firstly carried out on lumped-masses model for identifying the dynamic properties of the isolated superstructure that minimizes the global seismic response. Hence, a 3D FE model is adopted for the detailed design and analysis of the IIS structure, with different solutions, in order to regularize the global seismic response of the IIS complex. Finally, some general design criteria are suggested.

This paper presents the results of an experimental program conducted on H-shaped reduced-scale reinforced masonry spandrels subjected to monotonic loadings. It summarized tests units, test set-up and experimental results relative to seventeen samples reinforced by thin-steel stripes arranged with different configurations, and compared with those unreinforced. The first configuration comprised masonry spandrels strengthened by unbonded horizontal and diagonal steel stripes (i.e., stripes connected by means of threaded rods to the nodal area of the panel), while the second masonry spandrels reinforced by bonded horizontal stripes (i.e., stripes connected with 5 or 13 threaded rods over the spandrel length). For each reinforcement configuration, slender, intermediate and squat slenderness ratios have been considered for the samples. The conducted research investigated the effectiveness of the reinforcement to enhance the seismic response of the spandrels. Test results demonstrated that the application of steel stripes is beneficial in changing the failure modes from shear-dominated into flexural-dominated, especially for intermediate and squat panels prone to brittle shear mechanisms. Despite that increases of strength are reduced with respect to unreinforced samples, when reinforced the post-peak response changes significantly being it characterized by a remarkable ductile response for whatever spandrels’ slenderness ratios.

Modeling of masonry buildings subjected to seismic actions still represents an open problem in structural engineering. The equivalent frame model is the most used approach to analyze the seismic behavior of both existing and new masonry constructions but, despite this, several aspects are being researched to improve its effectiveness. Among these, modeling of spandrel panels plays a key role to correctly analyze the in-plane seismic response of unreinforced masonry walls. Actually, horizontal mono-dimensional beam-like elements provided of both strength and displacement capacity are used to schematize the spandrel panels, also according with the most of current national and international codes. In this paper an alternative strut and tie scheme to model the spandrel panels, suitable to be used within the equivalent frame approach, is presented: the compressed masonry material is schematized with an equivalent diagonal no-tension truss, whose length and effective compressed area are obtained with limit equilibrium conditions, while tensile-resistant element is represented by no-compression truss. Such model allows a more realistic representation of the mechanical behavior of spandrels because both amount of axial force within the spandrel and the reduced elastic flexural and shear stiffness due to progressive cracking of material are taken into account. Moreover, the local failures of both compressed masonry and/or tensile-resistant elements are better identified and, consequently, also the failure mechanisms of the whole equivalent frame are better detailed. The proposed schematization has been used to simulate the seismic behavior of some reference case studies of existing masonry walls, strengthened with different steel ties arrangement. These walls have been modelled with a hybrid equivalent frame model which consists of mono-dimensional beam-like element for piers, fully rigid offsets for the nodal panels and a strut and tie scheme for spandrels.

This paper deals with the experimental monotonic and cyclic behavior of masonry spandrels reinforced with Fiber Reinforced Polymers (FRP). The research is a part of a wider program, started by the authors in the last decade, regarding the analysis of the seismic behavior of masonry spandrels in historical buildings of the Mediterranean area. The paper summarizes the properties of the test units, the test set-up and the results of the experimental monotonic and cyclic behavior conducted on twenty-four scaled down H-shaped spandrels made with homogeneous material (e.g. mortar with low tensile strength). Both unreinforced and FRP-reinforced specimens with three different slenderness ratios – e.g. slender, intermediate and squat – and three different arrangements of FRP laminates have been considered for the tests. The main objective has been to verify the possibility of preventing brittle failure modes, typical of spandrels subjected to in-plane seismic actions (e.g. diagonal cracking), and of increasing their strength by applying specific reinforcement systems, so encouraging more ductile behavior characterized by toe-crushing at the ends of the spandrels itself.

In-plane seismic behaviour of Cross-Laminated Timber (CLT) walls is influenced by panel-to-panel and panel-to-foundation mechanical connections, which consist of hold-downs and angle brackets. Due to the platform constructional technology, the orthogonal to grain timber-to-timber contact is also involved in the seismic response of the panels. To date, literature theoretical approaches to evaluating the flexural load-bearing capacity of CLT panels focus their attention on the schematization of hold-downs and angle brackets only, under evaluating the role of timber compressed in the perpendicular direction. In this paper the influence of orthogonal to grain timber properties on the overall seismic behaviour of CLT walls has been investigated, proposing a general theoretical model to schematize the panel-to-panel and panel-to-foundation connections. A parabola-rectangle constitutive behaviour has been defined to describe the orthogonal to grain timber behaviour in the connection zones, while hold-downs and angle brackets are modelled adopting literature models. Five different failure conditions, described by mathematical formulations, able to describe the entire axial force-bending moment interaction domain have been defined. The proposed model has also been employed to schematize the connection zones in multi-storey CLT walls with openings, allowing to investigate the effect of the orthogonal to grain properties on its seismic behaviour. Results of nonlinear analyses demonstrate a significant influence of orthogonal to grain timber properties on seismic behaviour of the walls, affecting their strength, stiffness, ductility and collapse mechanisms.

This paper deals with the influence of the rolling shear deformation on the flexural behavior of CLT (Cross-Laminated Timber) panels. The morphological configuration of the panels, which consist of orthogonal overlapped layers of boards, led to a particular shear behavior when subjected to out-of-plane loadings: the low value of the shear modulus in orthogonal to grain direction (i.e., rolling shear modulus) gives rise to significant shear deformations in the transverse layers of boards, whose grains direction is perpendicular with respect to the tangential stresses direction. This produces increases of deflections and vibrations under service loads, creating discomfort for the users. Different analytical methods accounting for this phenomenon have been already developed and presented in literature. Comparative analyses among the results provided by some of these methods have been carried out in the present paper and the influence of the rolling shear deformations, with reference to different span-to-depth (L/H) ratios investigated. Moreover, the analytical results have also been compared with those obtained by more accurate 2D finite element models. The results show that, at the service limit states, the influence of the rolling shear can be significant when the aspect ratios became less than L/H = 30, and the phenomenon must be accurately considered in both deflection and stress analysis of CLT floors. Contrariwise, in the case of higher aspect ratios (slender panels), the deflections and stresses can be evaluated neglecting the rolling shear influence, assuming the layers of boards as fully-connected.

In this paper the results of a wide experimental campaign on the structural behaviour of ancient chestnut beams are presented. The beams were taken from the floor slab of an existing building, they being representative of the bearing structures of common historical buildings of many Mediterranean countries. Therefore, they were characterized by natural defects and degradation phenomena, which may have a significant effect on the evaluation of the load bearing capacity of the member. Four beams in actual dimension have been considered, which have been subjected to static bending tests, aimed at the evaluation of stiffness, strength, post-elastic behaviour and collapse mechanism. In the paper, the global influence of relevant defect patterns on the behaviour of these beams has been evaluated by comparing their overall behaviour with the actual material response obtained by compression, bending and shear tests on defect-free small specimens. The obtained results show that the simplified methods commonly used to evaluate the bearing capacity of wooden beams can be safely applied to ancient structural members as well, provided that adequate reduction factors for the shear resistance are considered.

The refurbishment of ancient timber structures requires an acquaintance of the residual structural capacity of members in order to design reliable repairing interventions. Such information cannot be obtained by means of destructive tests on sacrificial elements extracted from the existing structures, while non-destructive tests (NDT) are currently performed in situ on timber elements. In this article, a methodology based on resistographic NDTs is analysed. In particular, an experimental campaign of NDTs on ancient chestnut elements has been carried out for determining a correlation between NDT results and mechanical wood properties, previously obtained by means of destructive tests. Then, a numerical formulation between resistographic tests carried out along the direction parallel to the grain and the longitudinal ultimate compressive stress has been proposed. In addition, since in situ NDTs can be performed only along direction transversal to the growth rings, a correlation between longitudinal and transversal NDTs has been obtained. Finally, in order to validate the proposed procedures, a series of analogous tests have been carried out also on new spruce elements.