Search

In this study, aiming to reduce the environmental impact of plastics, new composite materials containing recycled fibers from used paper coffee cups and oil extracted from spent coffee grounds (SCG) were produced. Accordingly, the cellulose fibers were chemically modified using lactic acid to be used as poly(lactic acid) filler reinforcement. The obtained results revealed that its addition improved the mechanical properties of the ensuing composites. The addition of 30% wt/wt of unmodified and modified fibers increased the Young modulus by 53% and 72%, respectively. In addition, enhanced biodegradability was obtained due to higher water absorption (up to 4% wt/wt). In parallel, coffee oil was used as a plasticizer and the affinity between the plasticizer and polymer matrix was confirmed by the lack of phase separation, by the improved flexibility of derived materials (the addition of 40% wt/wt of plasticizer increased the elongation at break by 86%) and by the better processability of the ensuing materials (the addition of 30% wt/wt of plasticizer increased the MFI by 205%). Overall, the results suggest that the use of modified cellulose fibers and the addition of SCG oil‐based plasticizer can be promising routes to produce eco‐friendly plastics. [ABSTRACT FROM AUTHOR]

In this study polyurethane (PU) residues were mixed with residues of textile fibers (cotton, wool and synthetic fibers up to 70 wt/wt) to produce 100% recycled composites. In addition, the effect of the type of fiber on the performance of the ensuing composites was evaluated. The presence of fibers showed similar effect on the density, reducing the density in the 5.5-9.0% range. In a similar manner, the addition of fillers decreased their thermal conductivity. The 70 wt/wt wool composite presented 38.1% lower thermal conductivity when compared to the neat matrix, a reduction that was similar for the other type of fibers. Moreover, the presence of fillers yields stiffer materials, especially in the case of the Wool based composites, which with 70 wt/wt of filler content increased the tensile modulus of the ensuing material 3.4 times. This was attributed to the aspect ratio and stiffness of this type of fiber. Finally, the high-water absorption and lower thermal stability observed, especially in the case of the natural fibers, was associated with the hydrophilic nature of fibers and porosity of composites. Overall, the results suggest that these textile-based composites are suitable for construction and automotive applications, with the advantage of being produced from 100% recycled raw-materials, without compromised performance. [ABSTRACT FROM AUTHOR]