Search

Nanoparticles (NPs) are increasingly applied in research and development of new therapies. Characterization of NP systems most often include size, shape, size distribution, and charge but information on the chemical stability of NPs and investigation of the presence of dissolved species is most often missing in efficacy studies due to lack of appropriate methods. In this study, a method based on capillary electrophoresis coupled to inductively coupled plasma mass spectrometry (CE-ICP-MS) was established for analysis of selenium (Se) NPs and dissolved Se species in aqueous media. Peak area and migration time precisions (RSD) of 1.4-3.0% and 1.0-2.6%, respectively, were obtained. CE-ICP-MS analysis of a commercially available SeNP suspension (Q-SeNP) revealed large amounts of selenite corresponding to 32% of the total Se content in the suspension, indicating considerable NP degradation upon storage. The CE-ICP-MS method was modified using a coated fused silica capillary in order to analyze SeNPs in human plasma. Peak area and migration time precisions (RSD) in the range of 3.3-10.7% and 0.8-2.8%, respectively, were achieved. Degradation of polyvinyl alcohol (PVA)-coated SeNPs to selenite in human plasma was demonstrated using the modified method. The amounts of SeNP and selenite were estimated based on a correction factor for the ICP-MS signals of PVA-SeNP and dissolved Se. To the best of our knowledge, this is the first study of SeNPs by CE-ICP-MS and highlights the potential of CE-ICP-MS for quantitative characterization of the behavior of SeNPs in biological media.

The study concerns development of simulated synovial fluid for in vitro release testing of drug and prodrug-based depot delivery systems for joint injection. The importance of drug protein binding and esterase-catalyzed prodrug hydrolysis was investigated using a membrane-based in vitro release testing system, the rotating dialysis cell. Protein binding was investigated in synovial fluid from arthritic patients, human plasma and phosphate buffer, pH 7.4, containing serum albumin. Compounds with low (sodium diatrizoate) and high (naproxen and diclofenac) degrees of protein binding were investigated. The cleavage of two poorly soluble naproxen and diclofenac ester prodrugs was studied in esterase-containing media, diluted synovial fluid and plasma. Regarding protein binding, the in vitro release studies revealed that drug release profiles obtained using buffer comprising 2% (w/v) serum albumin, or 40% (v/v) plasma were comparable to profiles obtained employing 80% (v/v) synovial fluid. For prodrug-based depot injectables, application of 40% (v/v) plasma provided release profiles comparable to those using 80% (v/v) synovial fluid. Design of simulated synovial fluids for characterizing in vitro the interplay between drug/prodrug solubility, protein binding and susceptibility to enzymatic cleavage, and joint residence time is feasible. Synovial fluid may be replaced with readily accessible serum albumin solutions or diluted plasma.

In the present study, a method for quantitation of the pharmaceutical peptide oxytocin (OT) and its diselenide-containing analogue (SeOT) in human plasma was developed using gradient elution LC-ICP-MS/MS. Plasma samples were precipitated with acetonitrile containing 1.0% TFA in a volume ratio of 1+3 (sample+precipitation agent) before analysis. Post-column isotope dilution analysis (IDA) was applied for quantitation and was compared with external calibration. Both calibration methods appeared to be fit for purpose regarding figures of merit including linearity, precision, LOD, LOQ and recovery. Analysis of OT and SeOT showed that selenium-based analysis is considerably more sensitive and selective compared to the sulfur-based analysis. Despite the relatively simpler setup of external calibration, IDA can be advantageous because it compensates for instrument drift and changes in organic solvent concentration. The method was applied for a stability study showing the degradation of OT and SeOT in plasma. The degradation of SeOT was faster than the degradation of OT in plasma. Thus, possible stability effects should be considered before replacing a disulfide bridge with a diselenide bridge or introducing a diselenide label in a potential drug. Graphical abstract: [Figure not available: see fulltext.]

Buccal films containing a pH modifying excipient may be able to increase bioavailability of drugs with pH-dependent solubility such as saquinavir. Access to suitable in vitro drug release testing methods may facilitate buccal formulation development. This study aimed to explore two release testing methods for characterising buccal films and to elucidate the relationship between microenvironmental pH (pHM, i.e. the pH around the swelling films) and saquinavir release. The Franz diffusion cell method was applicable to investigate the effect of hydroxypropyl methylcellulose (HPMC) grade on saquinavir release. Films containing HPMC K3 LV had a faster saquinavir release than films containing HPMC K100 LV. A UV/Vis imaging method was developed to visualise saquinavir release and pHM changes during the initial dissolution. Within 5 min, the pHM decreased from 6.8 to around 5.4 for HPMC K100 LV-based films containing 11.1 % or 16.6 % (w/w) malic acid. Subsequently, the pHM increased due to increasing concentrations of saquinavir. An increase in malic acid content led to a faster saquinavir release. The combination of methods may be broadly applicable for excipient screening in development of buccal formulations. The imaging approach holds promise for characterizing other pH modifying formulation principles.

In situ forming implants are exposed to an extracellular matrix resembling a gel rather than aqueous solution upon subcutaneous administration. The aim of study was to develop a gel-based release testing system for characterizing the long-term in vitro behavior of in situ forming implants. The gel-based system consisted of an agarose gel mimicking the subcutaneous injection site and a receiver layer comprising phosphate buffer. Poly(D,L-lactide-co-glycolide) in situ forming implants containing leuprolide acetate as the model peptide and N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide (DMSO) or triacetin as co-solvent were investigated. The gel-based release testing system discriminated between the formulations. Accelerated release data obtained at elevated temperatures were able to predict real-time release applying the Arrhenius equation. Monitoring of the microenvironmental pH of the implants was performed by UV–Vis imaging in the gel-based system at 50 °C. A pH drop (from pH 7.4 to 6.7 for the NMP and DMSO implants, to pH 5.5 for the triacetin implants) within the first day was observed, followed by an increase to pH ∼7.4. The gel-based system coupled with UV imaging offered opportunity for detailed evaluation and prediction of the in vitro performance of long-acting injectables, facilitating future development of in situ depot forming delivery systems.

Elucidating the impact of excipient variability on oral product performance in a biopharmaceutical perspective would be beneficial and allow excipient implementation on Quality by Design (QbD) approaches. The current study investigated the impact of varying viscosity of binders (hypromellose (HPMC)) and superdisintegrants (sodium starch glycolate (SSG)) and particle size distribution of lubricants (magnesium stearate (MgSt)) on the in vitro dissolution of a highly and a poorly soluble drug from immediate release formulations. Compendial (pharmacopoeia buffers) and biorelevant (media simulating the gastrointestinal fluids) media and the USP 2 and USP 4 apparatuses were used to assess the exerted excipient effects on drug dissolution. Real-time dissolution UV imaging provided mechanistic insights into disintegration and dissolution of the immediate release formulations. Varying the viscosity type of HPMC or SSG did not significantly affect drug dissolution irrespective of the compound used. Faster drug dissolution was observed when decreasing the particle size of MgSt for the highly soluble drug. The use of real-time dissolution UV Imaging revealed the influential role of excipient variability on tablet disintegration, as for the highly soluble drug, tablets containing high viscosity HPMC or low particle size MgSt disintegrated faster as compared to the control tablets while for the poorly soluble drug, slower tablet disintegration was observed when increasing the viscosity of the HPMC as compared to the control tablets. Changes in drug dissolution when varying excipients may be anticipated if the excipient change has previously affected drug solubility. The use of multivariate data analysis revealed the influential biopharmaceutical factors such as critical excipient types/properties, drug aqueous solubility, medium/hydrodynamic characteristics affecting the impact of excipient variability on in vitro drug dissolution.

Taylor dispersion analysis (TDA) is an absolute method (no calibration needed) for the determination of the molecular diffusion coefficient (D) based on the band broadening of a solute in a laminar flow. TDA is virtually applicable to any solute with size ranging from angstrom to sub-micrometer. The higher sizing limit is restricted by the occurrence of possibly two regimes: convective and hydrodynamic chromatography (HDC) regimes, which have different physical origins that should not be confused. This work aims at clearly defining the experimental conditions for which these two regimes can play a role, alone or concomitantly. It also calculates the relative error on D due to the HDC regime according to the solute to capillary size ratio. It is demonstrated in this work that HDC does not significantly affect the TDA measurement as long as the hydrodynamic radius of the solute is lower than 0.0051 times the capillary radius. Experimental illustrations of the occurrence of the two regimes are given taking polystyrene nanoparticles as model solutes. Finally, application of TDA to the sizing of large real-life solutes is proposed, taking cubosomes as new drug nanocarriers of potential interest for drug delivery purposes.

New strategies are continuously sought for the treatment of skin and wound infections due to increased problems with non-healing wounds. Electrospun nanofiber mats with antibacterial agents as drug delivery systems provide opportunities for the eradication of bacterial infections as well as wound healing. Antibacterial activities of such mats are directly linked with their drug release behavior. Traditional pharmacopoeial drug release testing settings are not always suitable for analyzing the release behavior of fiber mats intended for the local drug delivery. We tested and compared different drug release model systems for the previously characterized electrospun chloramphenicol (CAM)-loaded nanofiber (polycaprolactone (PCL)) and microfiber (PCL in combination with polyethylene oxide) mats with different drug release profiles. Drug release into buffer solution and hydrogel was investigated and drug concentration was determined using either high-performance liquid chromatography, ultraviolet-visible spectrophotometry, or ultraviolet (UV) imaging. The CAM release and its antibacterial effects in disc diffusion assay were assessed by bacterial bioreporters. All tested model systems enabled to study the drug release from electrospun mats. It was found that the release into buffer solution showed larger differences in the drug release rate between differently designed mats compared to the hydrogel release tests. The UV imaging method provided an insight into the interactions with an agarose hydrogel mimicking wound tissue, thus giving us information about early drug release from the mat. Bacterial bioreporters showed clear correlations between the drug release into gel and antibacterial activity of the electrospun CAM-loaded mats.

The pur­pose of this study was to con­duct an in­ter­lab­o­ra­tory ring-study, with six part­ners (aca­d­e­mic and in­dus­trial), in­ves­ti­gat­ing the mea­sure­ment of in­trin­sic dis­so­lu­tion rate (IDR) us­ing sur­face dis­so­lu­tion imag­ing (SDI) equip­ment. Mea­sure­ment of IDR is im­por­tant in phar­ma­ceu­ti­cal re­search as it pro­vides char­ac­ter­is­ing in­for­ma­tion on drugs and their for­mu­la­tions. This work al­lowed us to as­sess the SDI’s in­ter­lab­o­ra­tory per­for­mance for mea­sur­ing IDR us­ing a de­fined stan­dard op­er­at­ing pro­ce­dure (see sup­port­ing in­for­ma­tion) and six drugs as­signed as low (tadalafil, bromocrip­tine me­sy­late), medium (carvedilol, in­domethacin) and high (ibupro­fen, val­sar­tan) sol­u­bil­ity com­pounds. Fasted State Sim­u­lated In­testi­nal Fluid (FaS­SIF) and blank FaS­SIF (with­out sodium tau­ro­cholate and lecithin) (pH 6.5) were used as me­dia. Us­ing the stan­dard­ised pro­to­col an IDR value was ob­tained for all com­pounds and the re­sults show that the over­all IDR rank or­der matched the sol­u­bil­ity rank or­der. In­ter­lab­o­ra­tory vari­abil­ity was also ex­am­ined and it was ob­served that the vari­abil­ity for lower sol­u­bil­ity com­pounds was higher, co­ef­fi­cient of vari­a­tion >50%, than for in­ter­me­di­ate and high sol­u­bil­ity com­pounds, with the ex­cep­tion of in­domethacin in FaS­SIF medium. In­ter lab­o­ra­tory vari­abil­ity is a use­ful de­scrip­tor for un­der­stand­ing the ro­bust­ness of the pro­to­col and the sys­tem vari­abil­ity. On com­par­i­son to an­other pub­lished small-scale IDR study the rank or­der­ing with re­spect to dis­so­lu­tion rate is iden­ti­cal ex­cept for the high sol­u­bil­ity com­pounds. This re­sults in­di­cates that the SDI ro­bustly mea­sures IDR how­ever, no rec­om­men­da­tion on the use of one small scale method over the other is made.

There is a need for bio-predictive and well-characterized in vitro release models in the development of intra-articular depot formulations. Here, the commercially-available Scissor system, a membrane-based two-compartment release testing instrument, was applied to characterize the transport and release of the drug diclofenac employing conditions intended to mimic transport in the synovial joint. The fate of hyaluronic acid and human serum albumin, the main bio-relevant components incorporated in the system, was investigated. A promising strategy for providing sustained drug release upon intra-articular administration are lipid-based preformulations forming non-lamellar liquid crystalline phases in situ. The usefulness of the Scissor system for investigating the initial drug release from these delivery systems was evaluated. The diclofenac release rate upon injection of an aqueous solution was influenced by the composition of the injection site matrix, i.e. the hyaluronic acid content. Hyaluronic acid and human serum albumin were found to escape from the donor compartment into the acceptor medium through the employed polycarbonate membrane. Sustained diclofenac release was obtained by formation of highly viscous liquid crystalline phases upon injection of the lipid-based preformulations. The study shows the feasibility and potential of the Scissor system for testing initial release of intra-articular depot formulations of low-molecular-weight drug compounds.

Many bioanalytical methods rely on electrophoretic separation of structurally labile and surface active biomolecules such as proteins and peptides. Often poor separation efficiency is due to surfac ...

Buccal delivery of saquinavir has the advantage to bypass the gastrointestinal enzymatic degradation and the hepatic first-pass metabolism. Saquinavir has a pH-dependent solubility and is poorly soluble in human saliva at the physiological pH. Decreasing microenvironmental pH (pH M) in saliva may increase saquinavir release from buccal formulations. The present study aimed to investigate the effects of organic acids on the pH M, saquinavir release in vitro and the solid-state form of saquinavir. An UV/Vis imaging method was used to measure pH M. After 5 min of swelling of the buccal films containing malic acid, pH M was reduced from 6.8 to 5.4. The films containing malic acid were more efficient in maintaining low pH M than films containing citric acid and succinic acid. Addition of organic acids in the buccal films resulted in a faster drug release than films without acids due to the reduced pH M. However, the enhancement of saquinavir release was limited by the fast release of organic acids. Addition of malic acid and citric acid suppressed the crystallization of saquinavir during 3 months storage at the elevated temperature (40 °C) and humidity (RH 75%) respectively. These results suggest that pH M modifying film is a potential formulation strategy for buccal delivery of saquinavir.

Flow-Induced Dispersion Analysis (FIDA) enables characterization and quantification of proteins under native conditions. FIDA is based on measuring the change in size of a ligand as it selectively interacts with the target protein. The unbound ligand has a relatively small apparent hydrodynamic radius (size), which increase in the presence of the analyte due to binding to the analyte. The Kd of the interaction may be obtained in a titration experiment and the measurement of the apparent ligand size in an unknown sample forms the basis for determining the analyte concentration. The apparent molecular size is measured by Taylor dispersion analysis (TDA) in fused silica capillary capillaries. FIDA is a "ligand-binding" assay and has therefore certain features in common with Enzyme-Linked Immunosorbent Assay (ELISA), Surface Plasmon Resonance (SPR), and Biolayer Interferometry (BLI) based techniques. However, FIDA probes a single in-solution binding event and thus makes assay development straightforward, and the absolute size measurement enables built-in assay quality control. Further, as FIDA does not involve surface chemistries, complications related to nonspecific adsorption of analyte and assay components are minimized enabling direct measurement in, e.g., plasma and serum.

Evaluation of drug precipitation is important in order to address challenges regarding low and variable bioavailability of poorly water-soluble drugs, to assess potential risk of patient safety with infusion therapy, and to explore injectable in situ suspension-forming drug delivery systems. Generally, drug precipitation is assessed in vitro through solution concentration analysis methods. Dual-wavelength UV-vis imaging is a novel imaging technique that may provide an opportunity for simultaneously monitoring changes in both solution and solid phases during precipitation. In the present study, a multimodal approach integrating UV-vis imaging, light microscopy, and Raman spectroscopy was developed for characterization of piroxicam supersaturation, precipitation, and dissolution in a flow-through setup. A solution of piroxicam dissolved in 1-methyl-2-pyrrolidinone was injected into a flowing aqueous environment (pH 7.4), causing piroxicam to precipitate. Imaging at 405 and 280 nm monitored piroxicam concentration distributions during precipitation and revealed different supersaturation levels dependent on the initial concentration of the piroxicam solution. The combination with imaging at 525 nm, light microscopy, and Raman spectroscopy measurements demonstrated concentration-dependent precipitation and the formation, growth, and dissolution of individual particles. Results emphasize the importance of the specific hydrodynamic conditions on the piroxicam precipitation. The approach used may facilitate comprehensive understanding of drug precipitation and dissolution processes and may be developed further into a basic tool for formulation screening and development.

An analytical method based on capillary electrophoresis (CE) and inductively coupled plasma mass spectrometry (ICP-MS) detection was developed for studies on the interaction of gold-containing drugs and plasma proteins using auranofin as example. A detection limit of 18 ng/mL of auranofin corresponding to 5.2 ng/mL Au and a precision of 1.5 % were obtained. Kinetic studies of the interaction between auranofin and protein were performed by incubation in aqueous solutions as well as 20 % human plasma at 37 °C. The reaction of auranofin with human serum albumin (HSA) and plasma proceeded fast; 50 % of un-bound auranofin disappeared within 2 and 3 min, respectively. By blocking the free cysteine (Cys-34) by iodoacetamide on HSA, it was shown that Cys-34 was the main reaction site for auranofin. By selective labeling of HSA present in 20 % human plasma with iophenoxate, it was demonstrated that HSA was the major auranofin-interacting protein in plasma. The CE-ICP-MS method is proposed as a novel approach for kinetic studies of the interactions between gold-based drugs and plasma proteins. Graphical Abstract Development of a CE-ICP-MS based method allows for studies on interaction of the gold containing drug auranofin with plasma proteins.

Human serum albumin (HSA) is the most abundant protein in the human plasma. HSA has several physiological roles in the human body, including storage and transport. Owing to the predominance of albumin in plasma, HSA is often involved in the protein binding of drugs. The aim of this work was to develop a selective, quantitative method for determining albumin in plasma with the purpose of clarifying the fate of metal-based drugs in biological systems. The method can also be applied for determination of urine albumin, which is of relevance in diagnostics of kidney disease. A selective method for quantification of HSA based on labelling the protein with iophenoxic acid (IPA) was developed. Samples were subjected to size exclusion chromatography (SEC) and detection by inductively coupled plasma mass spectrometry (ICP-MS) monitoring iodine and platinum. The iodine signal for the HSA-IPA complex showed linearity in the range 1 to 250 mg L(-1). The precision was 3.7% and the accuracy 100.7% determined by analysis of a certified HSA reference material. The limit of detection (LOD) and limit of quantification (LOQ) were 0.23 and 9.79 mg L(-1), respectively. The method was applied for analysis of HSA in human plasma and urine samples and for studying the binding of cisplatin to proteins in the human plasma.

Rapid and sensitive quantification of protein based biomarkers and drugs is a substantial challenge in diagnostics and biopharmaceutical drug development. Current technologies, such as ELISA, are characterized by being slow (hours), requiring relatively large amounts of sample and being subject to cumbersome and expensive assay development. In this work a new approach for quantification based on changes in diffusivity is presented. The apparent diffusivity of an indicator molecule interacting with the protein of interest is determined by Taylor Dispersion Analysis (TDA) in a hydrodynamic flow system. In the presence of the analyte the apparent diffusivity of the indicator changes due to complexation. This change in diffusivity is used to quantify the analyte. This approach, termed Flow Induced Dispersion Analysis (FIDA), is characterized by being fast (minutes), selective (quantification is possible in a blood plasma matrix), fully automated, and being subject to a simple assay development. FIDA is demonstrated for quantification of the protein Human Serum Albumin (HSA) in human plasma as well as for quantification of an antibody against HSA. The sensitivity of the FIDA assay depends on the indicator-analyte dissociation constant which in favourable cases is in the sub-nanomolar to picomolar range for antibody-antigen interactions.

Peptides are usually administered through subcutaneous injection. For low potency drugs, this may require high concentration formulations increasing the risk of peptide aggregation, especially for compounds without any intrinsic chargeable groups. Carbetocin was used as a model to study the behavior of uncharged peptides at high concentrations. Manipulation of the aggregation behavior of 70 mg/mL carbetocin was attempted by selecting excipients which interact with hydrophobic groups in carbetocin, and cover hydrophobic surfaces and interfaces. Peptide aggregation was induced by shaking stress and followed over time. Carbetocin solutions showed significant visible particle formation already after 4 h of shaking stress. This particle formation was not due to supersaturation or phase separation but suggested a nucleated aggregation process. None of the excipients prevented carbetocin aggregation, though altered aggregation behavior was observed, such as induction of fibril formation for most, but not all, charged excipients. Sodium dodecyl sulfate was found to accelerate peptide aggregation both below and above the critical micelle concentration in half-filled vials. However, in the absence of an air headspace, sodium dodecyl sulfate above the critical micelle concentration was capable of preventing shaking-induced carbetocin aggregation. Our study highlights the complexity in rational excipient selection to stabilize uncharged peptides at high concentration.

Long-acting nonsteroidal anti-inflammatory drug formulations for intra-articular injection might be effective in the management of joint pain and inflammation associated sports injuries and osteoarthritis. In this study, a prodrug-based delivery system was evaluated. The synthesized diclofenac ester prodrug, a weak base (pKa 7.52), has relatively high solubility at low pH (6.5 mg mL(-1) at pH 4) and much lower solubility at physiological pH (4.5 μg mL(-1) at pH 7.4) at 37°C. In biological media including 80% (v/v) human synovial fluid (SF), the prodrug was cleaved to diclofenac mediated by esterases. In situ precipitation of the prodrug was observed upon addition of a concentrated slightly acidic prodrug solution to phosphate buffer or SF at pH 7.4. The degree of supersaturation accompanying the precipitation process was more pronounced in SF than in phosphate buffer. In the rotating dialysis cell model, a slightly acidic prodrug solution was added to the donor cell containing 80% SF resulting in a continuous appearance of diclofenac in the acceptor phase for more than 43 h after an initial lag period of 8 h. Detectable amounts of prodrug were found in the rat joint up to 8 days after knee injection of the acidic prodrug solution.

Drug formulations containing polyethylene glycol may give rise to formation of reaction products between the aforementioned and the active pharmaceutical ingredient. Supercritical fluid chromatography has recently achieved new interest and improved instrumentation is now available. Here, supercritical fluid chromatography has been evaluated for its possible use for determination of reactions products formed between polyethylene glycol and active pharmaceutical ingredients. A mixture of polyethylene glycols with average molecular weights of 400-6000Da was separated with supercritical fluid chromatography using silica columns and carbon dioxide modified with methanol as mobile phase. Satisfactory resolution (Rs=1.2) of the individual oligomers up to a molecular weight of 1000Da was obtained using evaporative light scattering as detection technique. The active pharmaceutical ingredients, cetirizine or indomethacin were investigated in a reaction mixture containing polyethylene glycol 400 after incubation at 80°C for 120h. Polyethylene glycol esters formed upon reaction with both active pharmaceutical ingredients were observed as polymeric patterns with ultraviolet detection and identified with mass spectrometry. Cetirizine was observed to be more reactive than indomethacin. The observed difference in reactivity is due to differences in polar and steric effects between cetirizine and indomethacin. Evaporative light scattering, ultraviolet absorbance and mass spectrometric detection were investigated and each detection technique has its own advantages and disadvantages, but in order to be able to detect selected impurities in the complex mixture of impurities formed, mass spectrometry is superior.

Intra-articular injection of oil solutions of lipophilic prodrugs that rapidly degrade to their parent compound in synovial fluid may constitute a feasible approach to increase the joint residence time of non-steroidal anti-inflammatory drugs. In this in vivo study, oil solutions of the N,N-diethyl glycolamide ester prodrug of naproxen (16 mg/ml) were injected into the rat knee joint by dosing 6 μl formulation per 100 g body weight. The sustained release properties were compared to those of intra-articularly injected aqueous and oil solutions of naproxen by monitoring the naproxen serum concentrations over time. Two oils, medium-chain triglycerides and castor oil, differing with respect to viscosity were tested. After intra-articular administration of oil prodrug solutions, a significant increase in the time to maximum naproxen serum concentration from around 40 to 245 min, an increase in the MRTj from around 0.11 to 3.3 h and a 30% reduction in the maximum serum concentration were observed compared to that of the parent naproxen. The similar serum profiles obtained using the two oils indicate that the release was not affected by the oil viscosity. A prolonged naproxen joint residence time in rats was shown by intra-articular injection of an oil prodrug solution.

Interactions of drug candidates with the biomacromolecules of the synovial fluid affect drug targeting to the articular cartilage as well as clearance from the synovial space upon intra-articular administration. Hyaluronic acid (HA) and human serum albumin (HSA) are two main components existing in the synovial fluid. To this end, we investigated the affinity of seven cationic amino acid and dipeptide β-naphthylamide derivatives towards HA and HSA in order to shed light on possible relationships between physicochemical properties, in particular charge state, and biomacromolecular interactions to increase the joint residence time. Capillary electrophoresis frontal analysis was used for characterization of the binding of the derivatives to hyaluronic acid and HSA at 25 °C in acetate buffer (pH 4.65) and phosphate buffer (pH 7.40), respectively. Linear binding isotherms were observed for the ligand–hyaluronic acid interactions and the obtained binding constants ranged from 43 to 133 M−1. The average fraction of bound ligand towards hyaluronic acid increased with increasing the net charge of the ligands but was less than 67 % for all investigated ligands. The obtained binding constants of the ligands with HSA varied in the range of 103–106 M−1. The interactions of low-molecular weight derivatives with hyaluronic acid were highly dependent on the ligand charge state. This trend was not observed for the interactions with HSA. The obtained affinity data may provide useful information in the design of cartilage adhesive prodrugs with extended residence time in the synovial cavity.

Self-Nanoemulsifying Drug Delivery Systems (SNEDDSs) were developed using well-defined excipients with the objective of mimicking digested SNEDDSs without the use of enzymes and in vitro lipolysis models and thereby enabling studies of the morphology and size of nanoemulsions as well as digested nanoemulsions by Cryo-TEM imaging and Dynamic Light Scattering. Four SNEDDSs (I-IV) were developed. Going from SNEDDS I to IV lipid content and solubility of the model drug cinnarizine decreased, which was also the case for dispersion time and droplet size. Droplet size of all SNEDDS was evaluated at 1% (w/w) dispersion under different conditions. Cinnarizine incorporation increased the droplet size of SNEDDSs I and II whereas for SNEDDSs III and IV no difference was observed. At low pH cinnarizine had no effect on droplet size, probably due to increased aqueous solubility and partitioning into the aqueous phase. Dispersion of the SNEDDSs in Simulated Intestinal Media (SIM) containing bile salts and phospholipids resulted in a decrease in droplet size for all SNEDDS, as compared to dispersion in buffer. Increasing the bile salt/phospholipid content in the SIM decreased the droplet sizes further. Mimicked digested SNEDDS with highest lipid content (I and II) formed smaller nanoemulsion droplet sizes upon dispersion in SIM, whereas droplet size from III and IV were virtually unchanged by digestion. Increasing the bile acid/phosphatidylcholine content in the SIM generally decreased droplet size, due to the solubilizing power of the endogenous surfactants. Digestion of SNEDDSs II resulted in formation of vesicles or micelles in fasted and fed state SIM, respectively. The developed and characterized SNEDDS provide for a better knowledge of the colloid phases generated during digestion of SNEDDS and therefore will enable studies that may yield a more detailed understanding of SNEDDS performance.

Upon subcutaneous administration, the distribution of drug between the delivery vehicle and the biological tissue critically affects the absorption of drug substances. Utilization of physical models resembling the native tissues appears promising for obtaining a detailed understanding of the performance of drug delivery systems based on in vitro experiments. The objective of this study was to evaluate a UV imaging-based method for real-time characterization of the release and transport of piroxicam in hydrogel-based subcutaneous tissue mimics/surrogates. Piroxicam partitioning from medium chain triglyceride (MCT) into 0.5% (w/v) agarose or 25% (w/v) F127-based hydrogels was investigated by monitoring the concentration profiles of the drug in the gels. The effect of pH on piroxicam distribution and diffusion coefficients was studied. For both hydrogel systems, the diffusion of piroxicam in the gels was not affected significantly by the pH change from 4.0 to 7.4 but a considerable change in the oil-gel distribution coefficients was found (24 and 34 times less at pH 7.4 as compared those observed at pH 4.0 for F127 and agarose gels, respectively). In addition, the release and transport processes of piroxicam upon the injection of aqueous or MCT solutions into an agarose-based hydrogel were investigated by UV imaging. The spatial distribution of piroxicam around the injection site in the gel matrix was monitored in real-time. The disappearance profiles of piroxicam from the injected aqueous solution were obtained. This study shows that the UV imaging methodology has considerable potential for characterizing transport properties in hydrogels, including monitoring the real-time spatial concentration distribution in vitro after administration by injection.

Liposomes are self-assembled phospholipid vesicles and have numerous research and therapeutic applications. In the pharmaceutical and biomedical sciences liposomes find use as models of biological membranes, partitioning medium and as drug carriers. The present review addresses the use of capillary electrophoresis and liposome electrokinetic chromatography for the characterization of liposomes in a pharmaceutical context. Capillary electrophoretic techniques have been used for the measurement of electrophoretic mobility, which provides information on liposome surface charge, size and membrane permeability of liposomes. The use of liposome electrokinetic chromatography and capillary electrophoresis for determination of liposome/water partitioning and characterization of drug-liposome interactions is reviewed. A number of studies indicate that capillary electrophoresis may have a role in the characterization of liposome drug delivery systems, e.g., for the investigation of encapsulation efficiency and drug leakage. The well-known characteristics of capillary electrophoresis, i.e., low sample volume requirement, high separation efficiency in aqueous media without a stationary phase, minimal sample preparation, and a high degree of automation, makes it an attractive approach in liposome research.

A capillary electrophoresis inductively coupled plasma mass spectrometry method for separation of free cisplatin from liposome-encapsulated cisplatin and protein-bound cisplatin was developed. A liposomal formulation of cisplatin based on PEGylated liposomes was used as model drug formulation. The effect of human plasma matrix on the analysis of liposome-encapsulated cisplatin and intact cisplatin was studied. The presence of 1 % of dextran and 4 mM of sodium dodecyl sulfate in HEPES buffer was demonstrated to be effective in improving the separation of liposomes and cisplatin bound to proteins in plasma. A detection limit of 41 ng/mL of platinum and a precision of 2.1 % (for 10 μg/mL of cisplatin standard) were obtained. Simultaneous measurements of phosphorous and platinum allows the simultaneous monitoring of the liposomes, liposome-encapsulated cisplatin, free cisplatin and cisplatin bound to plasma constituents in plasma samples. It was demonstrated that this approach is suitable for studies of the stability of liposome formulations as leakage of active drug from the liposomes and subsequent binding to biomolecules in plasma can be monitored. This methodology has not been reported before and will improve characterization of liposomal drugs during drug development and in studies on kinetics.

Sulfobutyl ether-β-cyclodextrin (SBEβCD) is utilized in preformulation and drug formulation as an excipient for solubilization of drugs with poor aqueous solubility. Approximately seven negative charges of SBEβCD play a role with respect to solubilization and complexation, but also have an influence on the ionic strength of the background electrolyte when the cyclodextrin is used in capillary electrophoresis. Mobility-shift affinity capillary methods for investigation of the complexation of taurocholate and taurochenodeoxycholate with the negatively charged cyclodextrin derivative applying constant power and ionic strength conditions as well as constant voltage and varying ionic strength were investigated. A new approach for the correction of background electrolyte ionic strength was developed. Mobility-shift affinity capillary electrophoresis experiments obtained at constant voltage and constant power settings were compared and found to provide binding parameters that were in good agreement upon correction. The complexation of taurochenodeoxycholate with SBEβCD was significantly stronger than the corresponding interaction involving taurocholate. The obtained stability constants for the bile salts were in the same range as those previously reported for the interaction with neutral β-cyclodextrins derivatives, i.e. the positions of the negative charges on SBEβCD and the bile salts within the complex did not lead to significant electrostatic repulsion.

The present study was designed to evaluate the effect of the negatively charged food-grade emulsifier citrem on the internal nanostructures of oil-free and oil-loaded aqueous dispersions of phytantriol (PHYT) and glyceryl monooleate (GMO). To our knowledge, this is the first report in the literature on the utilization of this charged stabilizing agent in the formation of aqueous dispersions consisting of well-ordered interiors (either inverted-type hexagonal (H(2)) phases or inverted-type microemulsion systems). Synchrotron small-angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (cryo-TEM) were used to characterize the dispersed and the corresponding nondispersed phases of inverted-type nonlamellar liquid-crystalline phases and microemulsions. The results suggest a transition between different internal nanostructures of the aqueous dispersions after the addition of the stabilizer. In addition to the main function of citrem as a stabilizer that adheres to the surface of the dispersed particles, it has a significant impact on the internal nanostructures, which is governed by the following factors: (1) its penetration between the hydrophobic tails of the lipid molecules and (2) its degree of incorporation into the lipid-water interfacial area. In the presence of citrem, the formation of aqueous dispersions with functionalized hydrophilic domains by the enlargement of the hydrophilic nanochannels of the internal H(2) phase in hexosomes and the hydrophilic core of the L(2) phase in emulsified microemulsions (EMEs) could be particularly attractive for solubilizing and controlling the release of positively charged drugs.

A novel real-time UV imaging approach for non-intrusive investigation of the diffusion and partitioning phenomena occurring during piroxicam release from medium chain triglyceride (MCT) solution into two hydrogel matrices is described. Two binary polymer/buffer gel matrices, 0.5% (w/v) agarose and 25% (w/v) Pluronic F127, were applied as simple models mimicking the subcutaneous tissue. The evolution of the absorbance maps as a function of time provided detailed information on the piroxicam release processes upon the exposure of the gel matrices to MCT. Using calibration curves, the concentration maps of piroxicam in the UV imaging area were determined. Regression of the longitudinal concentration-distance profiles, which were obtained using expressions derived from Fick's second law, provided the diffusivity and the distribution coefficients of piroxicam penetrated into the gels. The obtained MCT-agarose (pH 7.4) distribution coefficient of 1.4 was identical to the MCT-aqueous (pH 7.4) distribution coefficient determined by the shake-flask method whereas that of the MCT-Pluronic F127 system was four times less. The experimental data show that UV imaging may have considerable potential for investigating the transport properties of drug formulations intended for the subcutaneous administration.

A capillary electrophoresis-inductively coupled plasma mass spectrometry (CE-ICP-MS) method was developed for separation of the free oxaliplatin drug substance from liposome-entrapped oxaliplatin. Simultaneous determination of phosphorous and platinum opened the possibility to simultaneously monitor the liposomes (phospholipids) and platinum-based drug. In order to suppress the interferences, argon gas was used as a collision gas in ICP-MS. A detection limit of 29 ng/mL of platinum and a precision of 2.9% (for 10 μg/mL of oxaliplatin standard) were obtained. Measurement of the total concentration of free and encapsulated oxaliplatin by CE-ICP-MS was compared with total determination by ICP-MS after microwave digestion and showed a good agreement. A liposomal formulation of oxaliplatin based on PEGylated liposomes was used as a model drug formulation. Studies of accelerated drug release induced by sonication and phospholipase A(2) catalyzed hydrolysis were performed. It was demonstrated that the CE-ICP-MS was an efficient in vitro characterization method in the development and quality assurance purposes of lipsome-based formulation of metallodrugs.

A capillary electrophoresis-based method to characterize a PEGylated liposomal drug formulation of the anti-cancer agent oxaliplatin was developed. Pharmaceutical characterization in terms of determination of the free and total oxaliplatin concentrations in the liposomal formulation was successfully performed allowing calculation of the percentage of encapsulated drug and encapsulation efficiency. The trapping efficiency was likewise calculated. The capillary electrophoresis method allowed liposome characterization in the intended formulation media (sucrose solution with low electrolyte concentration), and the attained results were consistent with inductively coupled plasma mass spectrometry measurements. Accelerated drug leakage studies were initiated by the sonication of the PEGylated formulation, using an ultrasound probe, subsequently the drug leakage was determined by capillary electrophoresis. The results obtained with the PEGylated liposomes demonstrate that capillary electrophoresis may be a useful tool for the characterization of liposomal drug formulations.

In this work, the applicability of using CE to perform a physicochemical characterization of a PEGylated liposomal drug formulation of the anti-cancer agent oxaliplatin was examined. Characterization of the liposomal drug formulation using CE instrumentation encompassed: determination of the electrophoretic mobilities, size determination by Taylor dispersion analysis and interaction studies. Electrophoretic mobilities determined by CE were compared with the results obtained by laser Doppler electrophoresis, which were found to be subject to larger variation. Average hydrodynamic diameters of the liposome preparations, as determined by Taylor dispersion analysis, were in the range of 61-84 nm and were compared with the results obtained by dynamic light scattering. Interactions between oxaliplatin (and paracetamol) and the PEGylated liposome were non-detectable by CE frontal analysis as well as by liposome electrokinetic chromatography. In contrast, for the more lipophilic compound propranolol, apparent liposome-aqueous phase distribution coefficients (D(lip) ) were successfully determined by both electrokinetic chromatography (log D(lip) =2.10) and by CE frontal analysis (log D(lip) =2.14). It is envisioned that CE and capillary-based techniques, including Taylor dispersion analysis, will be useful tools for the characterization of nanoparticulate (e.g. liposomal) drug formulations.

Results: Basic physicochemical properties including their apparent solubility in aqueous buffer and vegetable oils of a series of 11 peptidomimetics varying with respect to chain length and degree of N-methylation were estimated. It was observed that the compounds in contact with water transformed into sticky, slowly dissolving semisolid materials. Based on these observations, the in vitro release behavior of selected peptide derivatives from oil solutions and in situ formed precipitates was investigated using a validated in vitro release model. Conclusion: The results of this investigation suggest that both types of oil-based drug delivery systems might constitute alternative sustained release formulation principles of such amorphous peptide derivatives for the intra-articular route of administration.

Ghrelin is a pharmacologically interesting peptide hormone due to its effects on appetite and metabolism. The cationic, octanoylated 28 amino acid peptide has a short biological half-life; thus, prolonged release formulations are of interest. Acylated peptides have been suggested to bind to or be incorporated into liposomes. Formulations based on neutral dipalmitoylphosphatidylcholine (DPPC) liposomes and phosphatidylcholine :cholesterol (70:30mol%) liposomes, and negatively charged dipalmitoylphosphatidylcholine :di p a l mito y l p h os p h ati d y l serine (DPPC:DPPS) (70:30mol%) liposomes (2 mM total lipid concentration) were characterized using ACE. Pre-equilibrium CZE and frontal analysis CE methods circumventing capillary wall adsorption of the peptide and the liposomes and suitable for characterizing ghrelin-liposome interactions were developed. The cationic peptide exhibited low affinity (

To establish a pharmacokinetic model for the model drug, sodium diatrizoate (DTZ), allowing joint disappearance kinetics to be estimated from serum appearance kinetics following intra-articular administration, and to calculate the relative joint exposure after intravenous and intra-articular DTZ administration (F(iv/IA)).Each of five horses received an aqueous solution of 3.9 mg/kg sodium diatrizoate both intravenously and intra-articularly separated by a one-week wash out period. Serum and synovial samples were collected over 7 h and analyzed for content of model compound using inductively coupled plasma mass spectrometry.Differential equations were used for describing the transport of DTZ between the joint and the central compartment. The three-compartment lag-time model obtained demonstrates that the rate of drug appearance in the systemic circulation equals the rate of disappearance from the joint compartment. Following intravenous and intra-articular administration, an average F(iv/IA) of 0.04% (n = 4) was calculated based on the synovial fluid profiles of DTZ.This study implies that aspects of the intra-articular fate of DTZ can be obtained from serum data in case synovial fluid samplings are limited, for various possible reasons. The low F(iv/IA) may stimulate future research in the field of intra-articular administration of anti-osteoarthritic drugs.

The feasibility of capillary electrophoresis frontal analysis for the study of low-molecular-weight ligand- chondroitin sulfate interactions was investigated. The interaction of the 7 cationic ligands (lidocaine, propranolol, scopolamine, N-methyl scopolamine, N-butyl scopolamine, 2-propylisochinolinium, and methyl viologen) with the glycosaminoglycan chondroitin sulfate was investigated in 0.067 M phosphate buffer, pH 7.4, at 25 o C. A frontal analysis method with a short analysis time, suitable for ranking ligands according to degree of complexation for chondroitin sulfate was developed. The double charged ligand methyl viologen possessed the highest affinity for chondroitin sulfate. Linear binding isotherms were obtained and apparent association constants were determined. Capillary electrophoresis frontal analysis may be an attractive tool for characterization of ligand-glycosaminoglycan interactions.

The potential of using CE frontal analysis (CE-FA) for the study of low-molecular-weight drug–liposome interactions was assessed. The interaction of bupivacaine, brompheniramine, chlorpromazine, imipramine, and ropivacaine with net negatively charged 80/20 mol% 1-oleoyl-2-palmitoyl-sn-glycero-3-phosphocholine/egg yolk phosphatidic acid liposome suspensions in HEPES buffer at pH 7.4 was investigated. The fraction of free drug as a function of lipid concentration was measured and apparent liposome – buffer distribution coefficients were determined for the basic drug substances. The distribution coefficients increased in the order ropivacaine, bupivacaine, brompheniramine, imipramine, and chlorpromazine. The developed CE method was relatively fast allowing estimates of drug–liposome affinity to be obtained within 15 min. CE-FA may have the potential to become a valuable tool for the characterization of drug–liposome interactions in relation to estimation of drug lipophilicity and for the evaluation of drug distribution in liposomal drug delivery systems.

The objective of this study was to gain insight into factors influencing the drug release kinetics from oil suspensions. The in vitro drug release from suspensions was investigated at pH 7.4 using the local anesthetics, bupivacaine and ropivacaine, as model drug compounds. Two dialysis membrane-based in vitro release models differing with respect to stirring of the donor compartment were employed to study the release characteristics of oil suspensions comprising the free base or the corresponding drug hydrochloride salt. In the rotating dialysis cell model identical release profiles from aqueous and oil suspensions of the base form were obtained for both ropivacaine and bupivacaine. From the steady state fluxes, drug concentrations in the aqueous donor compartment were found to be in agreement with drug solubilities at pH 7.4. Also relatively fast transformation of a sesame oil suspension of the oil insoluble ropivacaine hydrochloride salt into an aqueous suspension of ropivacaine base was observed. Collectively, these observations indicate a lability of the oil film surrounding the solid particles eventually caused by rotation of the donor cell. In the Float A Lyzer model, which operates at much less intensive stirring, significantly slower release rates from aqueous and oil suspensions of ropivacaine base were obtained. In the latter model, ropivacaine was released faster from oil suspensions containing the hydrochloride salt than from the corresponding oil suspensions of the free base form. These findings suggest that the oil film surrounding the particles also is instable in the absence of significant shear forces.

A method for quantification of a pharmaceutical peptide in human plasma was developed using gradient elution LC-ICP-MS. A membrane desolvation (MD) system was applied to remove organic solvents from the eluent prior to the detection as SO+ in the dynamic reaction cell (DRC) of the ICP-DRC-MS instrument and subsequent quantification by post-column isotope dilution (IDA). Plasma proteins were precipitated prior to analysis. Analytical figures of merit including linearity, precision, LOD, LOQ and accuracy were considered satisfactory for analysis of plasma samples. The selectivity of the developed method was demonstrated for five pharmaceutically relevant peptides: desmopressin, penetratin, substance P, PTH (1-34) and insulin. Preliminary experiments on an ICP-MS/MS system using oxygen to reduce the effect of organic solvents were also performed to compare sensitivity. The results of the study demonstrated that LC-ICP-MS post-column IDA may constitute a valuable additional tool in quantification of non-labelled peptides in the early drug development offering absolute quantification without need of species specific standards.

The present work describes the characterization of diflunisal salts of the analgesic agents bupivacaine, lidocaine, and morphine including their solubility behaviour and release characteristics from solutions and selected salt suspensions in vitro using the rotating dialysis cell model. The solubility of the 1:1 salts at pH 7.4 differed by a factor of 9 with the bupivacaine and lidocaine salts representing the poorest and most soluble salt (0.73 and 6.6mM, respectively). Common ion effects were observed for the diflunisal salts of bupivacaine and morphine when various concentrations of the lidocaine-diflunisal salt were present in aqueous buffer (pH 7.4). The most pronounced salting-out effect was observed for the poorest soluble salt. From Setschenow type plots apparent salting-out constants of 265 M(-1) (bupivacaine) and 54.7 M(-1) (morphine) were calculated. After instillation of mixed salt suspensions comprising the diflunisal salts of bupivacaine and lidocaine into the donor cell of the release model, lidocaine appeared rapidly in the acceptor phase. After clearance of lidocaine from the donor cell, equal and constant fluxes of bupivacaine and diflunisal were observed. The residence times of bupivacaine within the donor compartment was prolonged with increasing lidocaine-diflunisal salt load in the mixed suspensions whereas the slopes of the linear part of the bupivacaine release profiles were affected to a minor extent only. The obtained data indicate that local multimodal analgesia, characterized by rapid onset and extended duration of action, can be achieved upon injection of mixed suspensions of salts differing with respect to aqueous solubility comprising a common ion into a small body compartment (such as the joint cavity).

Affinity capillary electrophoresis has become an established approach for performing interaction studies. In affinity electrokinetic chromatography the retention factor, as in liquid chromatography, is useful for describing the migration behavior of the analytes, and is instrumental for assessing the affinity of an analyte for the pseudo-stationary phase. Erroneous use of the retention factor concept in affinity capillary electrophoretic studies has appeared in a number of recent papers. The errors and their origin are pointed out, and the correct use of retention factors in affinity electrokinetic chromatography and capillary electrophoresis is summarized.

In vitro drug release rates from oil depot formulations intended for intra-articular injection have been investigated by using the rotating dialysis cell. The rate of drug appearance in the acceptor phase after instillation of sesame oil solutions of naproxen and lidocaine into the small aqueous donor compartment applied to first-order kinetics. In the present three-compartment model oil-aqueous phase distribution equilibrium was maintained at all times in the donor phase and thus drug efflux from the donor compartment was dictated by the distribution coefficient. A mathematical description of the rate of drug release into the acceptor phase and the interdependence of the observed apparent first-order rate constants and the drug oil-water distribution coefficients is provided. The in vitro model may constitute a valuable tool in formulation design and development allowing comparison of drug release rates originating from alteration of the oil vehicle composition, the drug compound or the composition of the release media to be performed.

The versatility of CE is beneficial for the study of many types of molecular interactions, because different experimental designs can be made to suit the characteristics of a particular interaction. A very versatile starting point is the preequilibration type of affinity CE that has been used extensively for characterizing biomolecular interactions in the last 15 years. We review this field here and include a comprehensive overview of the existing preincubation ACE modes including their advantages and limitations as well as the methodological developments and applications within the bioanalytical field.

Microemulsion electrokinetic chromatography (MEEKC) was assessed as a tool for determination of octanol-water partition coefficients using 34 solutes encompassing 8 carbonate esters. It was confirmed that microemulsions containing 1.44-2.88% w/w SDS, 6.49% w/w 1-butanol, and 0.82% w/w n-heptane constitute a good model of octanol-water partitioning in the pH range of 1.4-7.4. Use of the migration index concept led to improved repeatability of the MEEKC method compared to the use of retention factors. Using a dynamical coating, a high electroosmotic flow at pH 1.4 and 4.75 was achieved expanding the practical pH working range of the MEEKC system. The correlation obtained between the migration index and log P was unaffected by pH indicating that the properties of the microemulsion droplets and, thus, partitioning are independent of pH. No evidence for congeneric behavior was found for the sample set comprising solutes with different hydrogen bonding properties suggesting that simple reference compounds can be used as calibrators. Lipophilicity estimates for the series of carbonate esters were obtained. The increase in lipophilicity with chain length was smaller than expected from the Hansch substituent constant, pi.

Capillary electrophoresis frontal analysis was applied to 12 low molecular weight compounds including 8 drug substances displaying a range of different properties with respect to binding affinity, binding location, structure, lipophilicity, charge at physiological pH, and electrophoretic mobility. It was found that capillary electrophoresis frontal analysis can be used as a general method to study and quantify drug-human serum albumin interactions. The binding parameters obtained were consistent with literature values. Dextran was in some cases added to the run buffer to improve separation of the drug and human serum albumin plateau peaks. Results indicate that mobility differences between free and complexed human serum albumin give rise to only minor errors. Capillary electrophoresis frontal analysis was also found applicable to the study of human serum albumin drug displacement reactions. Low sensitivity of the UV-detection system was found to be the major limitation of capillary electrophoresis frontal analysis. The method is simple, and minimal effort has to be put into method development, which makes it well suited for screening in early drug development.

Polyethylene glycols (PEGs) are attractive as excipients in the manufacture of drug products because they are water soluble and poorly immunogenic. They are used in various pharmaceutical preparations. However, because of their terminal hydroxyl groups, PEGs can participate in esterification reactions. In this study, kinetics of two active pharmaceutical ingredients, cetirizine and indomethacin possessing carboxylic acid functionality, has been studied in PEG 400 and PEG 1000 at 50°C, 60°C, 70°C, and 80°C. HPLC–UV was applied for the determination of concentrations in the kinetic studies, whereas HPLC–MS was used to identify reaction products. The esterification reactions were observed to be reversible. A second-order reversible kinetic model was applied and rate constants were determined. The rate constants demonstrated that cetirizine was esterified about 240 times faster than indomethacin at 80°C. The shelf-life for cetirizine in a PEG 400 formulation at 25°C expressed as t95% was predicted to be only 30 h. Further, rate constants for esterification of cetirizine in PEG 1000 in relation to PEG 400 decreased by a factor of 10, probably related to increased viscosity. However, it is important to be aware of this drug–excipient interaction, as it can reduce the shelf-life of a low-average molecular weight PEG formulation considerably. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 103:2424–2433, 2014

Desmopressin [1-(mercaptopropanoic acid)-8-D-arginine vasopressin; dDAVP] is a vasopressin analogue with a selective antidiuretic effect. The oral bioavailability of desmopressin is limited due both to its high hydrophilicity leading to a low intestinal permeability and to low enzymatic stability. The degradation of desmopressin was investigated in aqueous buffer solutions (pH 6.00-9.00) containing the enzyme alpha-chymotrypsin at a concentration of 0.50 mg/ml at 37 degrees C. The degradation of desmopressin was also studied in solutions containing alpha-chymotrypsin in the concentration range 0.10-1.00 mg/ml (pH 7.40 and 37 degrees C). The rate of degradation was shown to be highly dependent on both enzyme concentration and pH. Maximal alpha-chymotrypsin activity was observed in the pH range 7.40-8.00. It was observed that phenylalanine was formed during the degradation of desmopressin. Phenylalanine was formed in the amount of 20% in 120 min. In the same time period 95% of desmopressin was degraded. The formation of phenylalanine can be explained from the substrate specificity of alpha-chymotrypsin. Cyclodextrins are known to stabilize drugs including peptides against both chemical and enzymatic degradation. In this study it was shown that hydroxypropyl cyclodextrins (alpha, beta and gamma) stabilized desmopressin against alpha-chymotrypsin-catalyzed degradation. The stabilization was by a factor of 3, 9 and 8 at the concentration 12.5% (w/v) for hydroxypropyl-alpha-cyclodextrin, hydroxylpropyl-beta-cyclodextrin and hydroxypropyl-gamma-cyclodextrin.

Assessment of release kinetics of subcutaneously administered protein therapeutics remains a complex challenge. In vitro methods capable of visualizing and characterizing drug transport properties, in the formulation as well as surrounding subcutaneous tissue environment, are desirable in drug development. Diffusion is a key process in drug release and transport. Thus, our objective was to develop a UV imaging in vitro method for direct visualization and characterization of insulin diffusivity and self-association behavior. Agarose hydrogels were used for mimicking subcutaneous tissue. Diffusivity, self-association, and apparent size of insulin were further characterized by Taylor dispersion analysis, size exclusion chromatography, and dynamic light scattering. At low insulin concentrations and pH 3.0, the hydrodynamic radius of insulin was determined by Taylor dispersion analysis to 1.5±0.1nm, corresponding to the size of insulin monomer. Increasing concentration and pH to 1mM and pH 7.4, respectively, favoring insulin hexamers, increased the insulin hydrodynamic radius to 3.0±0.1nm. The UV imaging method developed was adequately sensitive to identify and characterize, in terms of diffusion coefficients, the changes in insulin transport in hydrogel due to pH and concentration changes. In conclusion, UV imaging allowed insulin diffusion in hydrogel matrixes to be studied in real-time, and showed that insulin self-association properties were reflected in the diffusion behavior. UV imaging is a useful tool for characterization of the influence of environmental conditions on protein mass transport. Hydrogels combined with UV imaging may be of utility for in vitro testing of protein therapeutics.

An in vitro method for simultaneous assessment of platinum release and liposome stability of liposomal formulations in human plasma is demonstrated. The development and assessment of the method was performed on a PEGylated liposomal formulation containing cisplatin. Complete separation of free cisplatin, encapsulated cisplatin and cisplatin bound to plasma components was achieved by capillary electrophoresis (CE) separation and simultaneous monitoring of phosphorous (phospholipid) and platinum (cisplatin) by inductively coupled plasma mass spectrometry (ICP-MS). The method allows assessment of the encapsulation efficiency of the formulation, the physical stability of liposomes as well as cisplatin leakage in human plasma. The method was applied for studying the disintegration of liposomes and the interactions of leaked cisplatin with plasma components. Triggered release of the drug into plasma by sonication was also demonstrated. Analysis of liposomal formulations with alternative phospholipid compositions containing oxaliplatin showed similar results. Thus, the present in vitro method is suitable for mimicking the in vivo drug release profile in human plasma after administration of liposomal platinum formulations to patients. This approach may be of use in early drug development as well as in quality control.

The potential of UV imaging as a new small scale flow-through dissolution testing platform and its ability to incorporate biorelevant media was tested. Furosemide was utilized as a model poorly soluble drug, and dissolution media simulating conditions in the small intestine (5/1.25 mM and 40/10 mM bile salt/phospholipid, pH 6.5) together with corresponding blank buffer were employed. Dissolution rates as a function of flow rate (0.2-1.0 mL/min) were determined directly from UV images, and by analysis of collected effluent using UV spectrophotometry. A good agreement in dissolution rates was observed, however repeatability of data based on measurement of collected effluent was superior to that obtained by UV imaging in the utilized prototypic flow cell. Both methods indicated that biorelevant media did not markedly increase the dissolution rate of furosemide as compared to buffer. Qualitatively, UV images indicated that uncontrolled swelling/precipitation of furosemide on the compact surface was occurring in some samples. In situ Raman spectroscopy together with X-ray diffraction analysis confirmed that the observations were not due to a solid form transformation of furosemide. The presented results highlight the complementary features of the utilized techniques and, in particular, the detailed information related to dissolution behavior which can be achieved by UV imaging.