Search

Two-dimensional liquid chromatography coupled to mass spectrometry (2D-LC/MS) has been successfully implemented for several biopharmaceutical applications, but applications for oligonucleotide analysis have been relatively unexplored. When analyzing oligonucleotides in one-dimension, selecting an ion-pairing agent often requires a balance between acceptable chromatographic and mass spectrometric performance. When oligonucleotides are modified or conjugated to include extremely hydrophobic groups, such as fluorophores, the separation mechanism is further complicated by the impact the fluorophore has on retention. Triethylamine (TEA) buffered in hexafluoroisopropanol (HFIP) is the most commonly used ion-pairing agent for analyses requiring mass spectrometry, but the elution order of dye-conjugated failed sequences relative to the main peak is not length-based compared to what would be predicted for unconjugated oligonucleotides having the same sequence. Hexylammonium acetate (HAA) offers more efficient ion-pairing for a length-based separation, but MS response is compromised due to ion suppression. In this study, 2D-LC/MS is used to show that dye-conjugated oligonucleotide failed sequences can be resolved from the parent oligonucleotide using a strong ion-pairing agent in the first-dimension and further identified using a weaker but MS compatible ion-pairing agent in the second-dimension, results that are not achievable in a one-dimensional analysis. More specifically, a heart-cut configuration using ion-pair reversed-phase chromatography in both the first and second dimension (IP-RP - IP-RP) is used to transfer the n-1 impurity from a length-based separation in the first-dimension to a second-dimension analysis for identity confirmation using a single quadrupole detector. Identical C 18 column chemistry is used in both the first and second dimension to exploit changes in selectivity that are due to mobile phase selection. The n-1 impurity from the two-dimensional analysis can be detected at low nanogram levels, comparable to results achieved in a one-dimensional dilution series, which approaches the limit of detection of the instrumentation. This work has future applicability to more complex impurity profiling using high-resolution instrumentation, where a more extensive set of impurities could not be evaluated using one-dimensional techniques., (Copyright © 2019 The Authors. Published by Elsevier B.V. All rights reserved.)

The analysis of low-level (1-100 ppm) protein impurities (e.g., host-cell proteins (HCPs)) in protein biotherapeutics is a challenging assay requiring high sensitivity and a wide dynamic range. Mass spectrometry-based quantification assays for proteins typically involve protein digestion followed by the selective reaction monitoring/multiple reaction monitoring (SRM/MRM) quantification of peptides using a low-resolution (Rs ~1,000) tandem quadrupole mass spectrometer. One of the limitations of this approach is the interference phenomenon observed when the peptide of interest has the "same" precursor and fragment mass (in terms of m/z values) as other co-eluting peptides present in the sample (within a 1-Da window). To avoid this phenomenon, we propose an alternative mass spectrometric approach, a high selectivity (HS) MRM assay that combines the ion mobility separation of peptide precursors with the high-resolution (Rs ~30,000) MS detection of peptide fragments. We explored the capabilities of this approach to quantify low-abundance peptide standards spiked in a monoclonal antibody (mAb) digest and demonstrated that it has the sensitivity and dynamic range (at least 3 orders of magnitude) typically achieved in HCP analysis. All six peptide standards were detected at concentrations as low as 0.1 nM (1 femtomole loaded on a 2.1-mm ID chromatographic column) in the presence of a high-abundance peptide background (2 µg of a mAb digest loaded on-column). When considering the MW of rabbit phosphorylase (97.2 kDa), from which the spiked peptides were derived, the LOQ of this assay is lower than 50 ppm. Relative standard deviations (RSD) of peak areas (n = 4 replicates) were less than 15% across the entire concentration range investigated (0.1-100 nM or 1-1,000 ppm) in this study.

Hydrophobic interaction chromatography (HIC) and MS are leading techniques for the characterization of the critical quality attributes (CQA) of antibody-drug conjugates (ADCs). This includes the average drug-to-antibody ratio (DAR) and drug loading distribution. A workflow that effectively utilizes the synergy between chromatography and detection technologies has been developed and was assessed using cysteine-conjugated ADCs. The DAR of low, moderate and high drug-loaded ADC samples were calculated from the chromatographic peak areas using LC(HIC)/UV or the deconvoluted mass spectra using native LC(SEC)/MS. The results of DAR by both technologies produced comparable results. In addition, the 2D-LC/MS system has been evaluated in combination with HIC and reversed-phase chromatography for structural identification. Individual peaks from the 1st dimension of the HIC separation were isolated online and re-directed to the 2nd dimension reversed-phase column. ADC was detected as the sub-units by MS and the conjugation site was identified via a middle down approach.

In this study, we demonstrate the utility of ultra-performance liquid chromatography coupled to mass spectrometry (MS) and ion-mobility spectrometry (IMS) to characterize and compare reference and biosimilar monoclonal antibodies (mAbs) at an advanced level. Specifically, we focus on infliximab and compared the glycan profiles, higher order structures, and their host cell proteins (HCPs) of the reference and biosimilar products, which have the brand names Remicade® and Inflectra®, respectively. Overall, the biosimilar attributes mirrored those of the reference product to a very high degree. The glycan profiling analysis demonstrated a high degree of similarity, especially among the higher abundance glycans. Some differences were observed for the lower abundance glycans. Glycans terminated with N-glycolylneuraminic acid were generally observed to be at higher normalized abundance levels on the biosimilar mAb, while those possessing α-linked galactose pairs were more often expressed at higher levels on the reference molecule. Hydrogen deuterium exchange (HDX) analyses further confirmed the higher-order similarity of the 2 molecules. These results demonstrated only very slight differences between the 2 products, which, interestingly, seemed to be in the area where the N-linked glycans reside. The HCP analysis by a 2D-UPLC IMS-MS approach revealed that the same 2 HCPs were present in both mAb samples. Our ability to perform these types of analyses and acquire insightful data for biosimilarity assessment is based upon our highly sensitive UPLC MS and IMS methods.

Cysteine-conjugated antibody-drug conjugates (ADCs) are manufactured using controlled partial reduction and conjugation chemistry with drug payloads that typically occur in intervals of 0, 2, 4, 6, and 8. Control of heterogeneity is of particular importance to the quality of ADC product because drug loading and distribution can affect the safety and efficacy of the ADC. Liquid chromatography ultra-violet (LC-UV)-based methods can be used to acquire the drug distribution profiles of cysteine-conjugated ADCs when analyzed using hydrophobic interaction chromatography (HIC). However, alternative analysis techniques are often required for structural identification when conjugated drugs do not possess discrete ultra-violet absorbance properties for precise assessment of the drug-to-antibody ratio (DAR). In this study, multidimensional chromatography was used as an efficient method for combining non-compatible techniques, such as HIC, with analysis by mass spectrometry (LC/LC/QTOF-MS) for rapid on-line structural elucidation of species observed in HIC distribution profiles of cysteine-conjugated ADCs. The methodology was tested using an IgG1 mAb modified by cysteine conjugation with a non-toxic drug mimic. Structural elucidation of peaks observed in the HIC analysis (1(st) dimension) were successfully identified based on their unique sub-unit masses via mass spectrometry techniques once dissociation occurred under denaturing reversed phase conditions (2(nd) dimension). Upon identification, the DAR values were determined to be 2.83, 4.44, and 5.97 for 3 drug load levels (low-, medium-, and high-loaded ADC batches), respectively, based on relative abundance from the LC-UV data. This work demonstrates that multidimensional chromatography coupled with MS, provides an efficient approach for on-line biotherapeutic characterization to ensure ADC product quality.

A generic method for the identification and quantification of host-cell proteins (HCPs) in protein biopharmaceuticals is described. Therapeutic proteins and HCPs were converted to complex peptide mixtures following tryptic digestion. Comprehensive peptide separations were performed using online two-dimensional capillary liquid chromatography-(LC) involving high-pH reversed phase (RP)/low-pH RP separations. We applied this method to the analysis of HCP impurities in monoclonal antibody (mAb) preparations.

Assays for identification and quantification of host-cell proteins (HCPs) in biotherapeutic proteins over 5 orders of magnitude in concentration are presented. The HCP assays consist of two types: HCP identification using comprehensive online two-dimensional liquid chromatography coupled with high resolution mass spectrometry (2D-LC/MS), followed by high-throughput HCP quantification by liquid chromatography, multiple reaction monitoring (LC-MRM). The former is described as a "discovery" assay, the latter as a "monitoring" assay. Purified biotherapeutic proteins (e.g., monoclonal antibodies) were digested with trypsin after reduction and alkylation, and the digests were fractionated using reversed-phase (RP) chromatography at high pH (pH 10) by a step gradient in the first dimension, followed by a high-resolution separation at low pH (pH 2.5) in the second dimension. As peptides eluted from the second dimension, a quadrupole time-of-flight mass spectrometer was used to detect the peptides and their fragments simultaneously by alternating the collision cell energy between a low and an elevated energy (MSE methodology). The MSE data was used to identify and quantify the proteins in the mixture using a proven label-free quantification technique ("Hi3" method). The same data set was mined to subsequently develop target peptides and transitions for monitoring the concentration of selected HCPs on a triple quadrupole mass spectrometer in a high-throughput manner (20 min LC-MRM analysis). This analytical methodology was applied to the identification and quantification of low-abundance HCPs in six samples of PTG1, a recombinant chimeric anti-phosphotyrosine monoclonal antibody (mAb). Thirty three HCPs were identified in total from the PTG1 samples among which 21 HCP isoforms were selected for MRM monitoring. The absolute quantification of three selected HCPs was undertaken on two different LC-MRM platforms after spiking isotopically labeled peptides in the samples. Finally, the MRM quantitation results were compared with TOF-based quantification based on the Hi3 peptides, and the TOF and MRM data sets correlated reasonably well. The results show that the assays provide detailed valuable information to understand the relative contributions of purification schemes to the nature and concentrations of HCP impurities in biopharmaceutical samples, and the assays can be used as generic methods for HCP analysis in the biopharmaceutical industry.

Influenza vaccination is recognized as the most effective method for reducing morbidity and mortality due to seasonal influenza. To improve vaccine supply and to increase flexibility in vaccine manufacturing, cell culture-based vaccine production has emerged to overcome limitations of egg-based production. The switch of production system and the need for annual re-evaluation of vaccines for the effectiveness due to frequent viral antigenic changes call for methods for complete characterization of the hemagglutinin (HA) antigens and the final vaccine products. This study describes advanced liquid chromatography-mass spectrometry (LC-MS) methods for simultaneous identification of HA proteins and process-related impurities in a trivalent influenza candidate vaccine, comprised of purified recombinant HA (rHA) antigens produced in an insect cell-baculovirus expression vector system (BEVS). N-linked glycosylation sites and glycoforms of the three rHA proteins (corresponding to influenza A subtypes H1N1 and H3N2 and B virus, respectively) were profiled by peptide mapping using reversed-phase (RP) LC-MS(E) (data independent acquisition LC-MS using an alternating low and elevated collision energy scan mode). The detected site-specific glycoforms were further confirmed and quantified by hydrophilic interaction LC (HILIC)-multiple reaction monitoring (MRM) assays. LC-MS(E) was used to characterize the vaccine candidate, providing both protein identities and site-specific information of glycosylation and degradations on each rHA protein. HILIC-MRM methodology was used for rapid confirming and quantifying site-specific glycoforms and potential degradations on each rHA protein. These methods can contribute to the monitoring of vaccine quality especially as it pertains to product comparability studies to evaluate the impact of production process changes.

This study shows that state-of-the-art liquid chromatography (LC) and mass spectrometry (MS) can be used for rapid verification of identity and characterization of sequence variants and posttranslational modifications (PTMs) for antibody products. A candidate biosimilar IgG1 monoclonal antibody (mAb) was compared in detail to a commercially available innovator product. Intact protein mass, primary sequence, PTMs, and the micro-differences between the two mAbs were identified and quantified simultaneously. Although very similar in terms of sequences and modifications, a mass difference observed by LC-MS intact mass measurements indicated that they were not identical. Peptide mapping, performed with data independent acquisition LC-MS using an alternating low and elevated collision energy scan mode (LC-MS(E)), located the mass difference between the biosimilar and the innovator to a two amino acid residue variance in the heavy chain sequences. The peptide mapping technique was also used to comprehensively catalogue and compare the differences in PTMs of the biosimilar and innovator mAbs. Comprehensive glycosylation profiling confirmed that the proportion of individual glycans was different between the biosimilar and the innovator, although the number and identity of glycans were the same. These results demonstrate that the combination of accurate intact mass measurement, released glycan profiling, and LC-MS(E) peptide mapping provides a set of routine tools that can be used to comprehensively compare a candidate biosimilar and an innovator mAb.