Search

This review is an overview of the recent advances of gas chromatography in essential oil analysis; in particular, it focuses on both the new stationary phases and the advanced analytical methods and instrumentations. A paragraph is dedicated to ionic liquids as gas chromatography stationary phases, showing that, thanks to their peculiar selectivity, they can offer a complementary contribution to conventional stationary phases for the analysis of complex essential oils and the separation of critical pairs of components. Strategies to speed-up the analysis time, thus answering to the ever increasing request for routine essential oils quality control, are also discussed. Last but not least, a paragraph is dedicated to recent developments in column miniaturization in particular that based on microelectromechanical-system technology in a perspective of developing micro-gas chromatographic systems to optimize the energy consumption as well as the instrumentation dimensions. A number of applications in the essential oil field is also included., (© 2021 Wiley-VCH GmbH.)

Room temperature ionic liquids (ILs) are well established stationary phases (SPs) for gas chromatography (GC) in several fields of applications because of their unique and tunable selectivity, low vapor pressure and volatility, high thermal stability (over 300 °C), and good chromatographic properties. This study is focused on an IL based on a phosphonium derivative (trihexyl(tetradecyl)phosphonium chloride, [P 66614 + ] [Cl - ]), previously shown to be suitable as a gas chromatographic SP because of its unique selectivity. In particular, it aims to establish the operative conditions to apply [P 66614 + ][Cl - ] column stability and maximum allowable operating temperatures (MAOT). The relatively low MAOT (210 °C) requires the adoption of a dedicated approach for analytes eluting above this temperature based on a suitable combination of efficiency and selectivity, and column characteristics (length, inner diameter and film thickness) and operative conditions. The performance of [P 66614 + ][Cl - ] column stability and maximum allowable operating temperatures (MAOT). The relatively low MAOT (210 °C) requires the adoption of a dedicated approach for analytes eluting above this temperature based on a suitable combination of efficiency and selectivity, and column characteristics (length, inner diameter and film thickness) and operative conditions. The performance of [P 66614 + ][Cl - ] as a GC SP have been validated through the Grob test, a model mixture of 41 compounds of different polarity, structure, and with different organic functional groups in the flavor and fragrance field, a standard mixture of 37 fatty acid methyl esters, some essential oils containing pairs or groups of compounds of different volatility critical to separate in particular peppermint, thyme, oregano, sandalwood and frankincense. The above approach has produced highly satisfactory separations with all of the samples investigated., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. The authors declare the following financial interests/personal relationships which may be considered as potential competing interests, (Copyright © 2020 Elsevier B.V. All rights reserved.)

The volatile fraction of natural products often consists of complex mixtures of isomeric and/or homologous components with similar structural and physical characteristics (e.g. mono- and sesquiterpenoids) that are not easy to separate simultaneously with conventional GC stationary phases, even when used with multidimensional systems. The introduction of ionic liquids (ILs) as stationary phases has opened up new perspectives in this field as their unique solvation properties result in uncommon selectivity, which is completely different to that of classic polydimethylsiloxane (PDMS)- and polyethyleneglycol (PEG)-based columns. Because of their peculiar selectivity and high inertness, IL-based columns have already found several applications in the natural product field in mono- and multidimensional GC and preparative GC, leading to the exhaustive analysis of complex samples (including aqueous solutions), and the separation of challenging pair(s) of compounds. This article provides an overview of how IL-based columns can be exploited in the fields of food and natural products, explores the wide range of applications that have already been developed and highlights the main features of these promising stationary phases, which are expected to be further extended in the near future, in particular, for routine use. Graphical abstract.

Room-temperature ionic liquids (ILs) have been shown to be successful as stationary phases (SPs) for gas chromatography in several fields of applications because of their unique and tunable selectivity, low vapor pressure and volatility, high thermal stability (over 300 °C), and good chromatographic properties. This study has been focused on two ILs based on a phosphonium cation (trihexyl(tetradecyl)phosphonium, P 66614 ) combined with different anions, previously shown to be suitable as gas chromatography (GC) SPs. In particular, trihexyl(tetradecyl)phosphonium bis[(trifluoromethyl)sulfonyl]imide ([P 66614 + ] [NTf 2 - ]) and trihexyl(tetradecyl)phosphonium chloride ([P 66614 + ] [Cl - ]) were investigated, as the Abraham linear solvation energy relationship has shown their ability to interact with the solute(s) when tested with a set of 26-34 probe analytes. The chromatographic performance were investigated on narrow bore and conventional test columns using the following: i) Grob test, ii) a group of model mixtures of compounds characteristic of the flavor, fragrance and essential oil fields (FFMix), iii) a standard mixture of 29 volatile allergens (AlMix), and iv) two essential oils of different complexity (sage and vetiver essential oils). The columns coated with the investigated IL SPs were characterized by similar polarity (Polarity Number (PN): 37 for [P 66614 + ] [Cl - ] and 33 for [P 66614 + ] [NTf 2 - ]), high efficiency and highly satisfactory inertness. The two IL SPs also exhibited a completely different separation performance, with [P 66614 + ] [Cl - ] test columns mainly characterized by high retention and selectivity based on the analyte functional groups, and [P 66614 + ] [NTf 2 - ] test columns featured by short retention and selectivity mainly related to the analyte volatility and polarity. These results were also confirmed with the analysis of sage and vetiver essential oils., (Copyright © 2018 Elsevier B.V. All rights reserved.)

A simple and rapid ionic liquid (IL)-based in situ dispersive liquid-liquid microextraction (DLLME) method was developed and coupled to headspace gas chromatography (HS-GC) employing electron capture (ECD) and mass spectrometry (MS) detection for the analysis of polychlorinated biphenyls (PCBs) and acrylamide at trace levels from milk and coffee samples. The chemical structures of the halide-based ILs were tailored by introducing various functional groups to the cations to evaluate the effect of different structural features on the extraction efficiency of the target analytes. Extraction parameters including the molar ratio of IL to metathesis reagent and IL mass were optimized. The effects of HS oven temperature and the HS sample vial volume on the analyte response were also evaluated. The optimized in situ DLLME method exhibited good analytical precision, good linearity, and provided detection limits down to the low ppt level for PCBs and the low ppb level for acrylamide in aqueous samples. The matrix-compatibility of the developed method was also established by quantifying acrylamide in brewed coffee samples. This method is much simpler and faster compared to previously reported GC-MS methods using solid-phase microextraction (SPME) for the extraction/preconcentration of PCBs and acrylamide from complex food samples., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Within a project exploring the application of lab-on-chip GC to in-field analysis of the plant volatile fraction, this study evaluated the performance of a set of planar columns (also known as microchannels, MEMS columns, or microfabricated columns) of different dimensions installed in a conventional GC unit. Circular double-spiral-shaped-channel planar columns with different square/rectangular sections up to 2m long were applied to the analysis of both essential oils and headspace samples of a group of medicinal and aromatic plants (chamomile, peppermint, sage, rosemary, lavender and bergamot) and of standard mixtures of related compounds; the results were compared to those obtained with reference narrow-bore columns (l:5m, dc:0.1mm, df:0.1 μm). The above essential oils and headspaces were first analyzed quali-and quantitatively with planar columns statically coated with conventional stationary phases (5%-phenyl-polymethylsiloxane and auto-bondable nitroterephthalic-acid-modified polyethylene glycol), and then submitted to chiral recognition of their diagnostic markers, by enantioselective GC with a planar columns coated with a cyclodextrin derivative (30% 6(I-VII)-O-TBDMS-3(I-VII)-O-ethyl-2(I-VII)-O-ethyl-β-cyclodextrin in PS-086). Column characteristics and analysis conditions were first optimized to obtain suitable retention and efficiency for the samples investigated. The planar columns tested showed performances close to the reference conventional narrow-bore columns, with theoretical plate numbers per meter (N/m) ranging from 6100 to 7200 for those coated with the conventional stationary phases, and above 5600 for those with the chiral selector., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Two thermodynamic parameters - entropy (ΔS) and enthalpy (ΔH) - ideally describe the thermodynamics of how the retention of an analyte in a stationary phase depends on the temperature. The paper examines the conversion of an analyte's entropy and enthalpy into chromatographically more meaningful equivalents: its characteristic temperature and thermal constant. Thermodynamic and characteristic parameters of 29 enantiomer pairs of chiral analytes, analysed with four cyclodextrin stationary phases, were measured, tabulated, and investigated. The distribution of all newly-measured characteristic parameters was found to be similar to the known distribution of these parameters for some 12,000 pairs of analytes, analysed with several stationary phases. This similarity suggests that the peak widths of the investigated analytes in temperature-programmed analyses should be generally the same as the peak widths of other similarly retained analytes. It also suggests that the previously-known optimum general heating rate (about 10 ºC/tM, i.e. 10°C per hold-up time) is also the general optimum for temperature-programmed enantioselective GC analyses with cyclodextrins as stationary phases. The optimum general heating rate corresponds to the shortest analysis time for a predetermined peak capacity. It can substantially differ from specific optima corresponding to the best separation of particular peak pairs. Theoretical prediction of these specific optima requires more complex non-ideal thermodynamic models, and more accurate measurement of the parameters involved-these topics that are outside the scope of this report., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Ionic liquids (ILs) are of great interest as moderately polar to polar stationary phases for GC, because their selectivity differs markedly from that of conventionally used phases. In the flavor, fragrance and essential oil fields, analysts often deal with complex mixtures of compounds having similar structural and physical characteristics (e.g., mono- and sesquiterpenoids), therefore requiring an interactive combination between chromatographic and mass spectral data for correct identification. New GC stationary phases with different selectivity must therefore be continually tested. Performance and evolution over time of commercially available IL columns versus those commonly used in these fields are here evaluated, mainly in view of their routine use. Chromatographic and separative properties (efficiency, separation capability, inertness and/or activity) of commercially available IL columns were compared to those of columns coated with 5% phenyl-95% methylpolysiloxane, 14% cyanopropyl-86% polysiloxane, and polyethylene glycol, on different complexity samples, including standard mixtures of volatile suspected allergens and pesticides, and cornmint and vetiver essential oils. The results show that IL columns can successfully be used for a wide range of applications characteristic of these fields, mainly because of their unusual selectivity, in particular when separations based on functional groups are required. Moreover, the latest generation of IL columns (IL61 and IL60) presents chromatographic performance comparable to or only slightly lower than that of the conventional columns routinely used in these fields., (Copyright © 2012 Elsevier B.V. All rights reserved.)

The study aimed to find the best trade-off between separation of the most critical peak pair and analysis time, in enantioselective GC-FID and GC-MS analysis of lavender essential oil, using the GC method-translation approach. Analysis conditions were first optimized for conventional 25 m x 0.25 mm inner diameter (dc) column coated with 6(I-VII)-O-tert-butyldimethylsilyl-2(I-VII)-3(I-VII)-O-ethyl-beta-cyclodextrin (CD) as chiral stationary phase (CSP) diluted at 30% in PS086 (polymethylphenylpolysiloxane, 15% phenyl), starting from routine analysis. The optimal multi-rate temperature program for a pre-set column pressure was determined and then used to find the pressures producing the efficiency-optimized flow (EOF) and speed-optimized flow (SOF). This method was transferred to a shorter narrow-bore (NB) column (11 m x 0.10 mm) using method-translation software, keeping peak elution order and separation. Optimization of the enantioselective GC method with the translation approach markedly reduced the analysis time of the lavender essential oil, from about 87 min with the routine method to 40 min with an optimal multi-rate temperature program and initial flow with a conventional inner diameter column, and to 15 min with FID as detector or 13.5 min with MS with a corresponding narrow-bore column, while keeping enantiomer separation and efficiency., (Copyright 2010 Elsevier B.V. All rights reserved.)

Asymmetrically substituted 6(I-VII)-O-t-butyldimethylsilyl(TBDMS)-3(I-VII)-O-ethyl-2(I-VII)-O-methyl-beta-cyclodextrin (MeEt-CD) and 6(I-VII)-O-TBDMS-2(I-VII)-O-ethyl-3(I-VII)-O-methyl-beta-cyclodextrin (EtMe-CD) were synthesised to evaluate the role of the substitution pattern in positions 2 and 3 on the enantioselectivity, in particular in view of their application to routine analysis in fast enantioselective gas chromatography (Es-GC). The chromatographic properties and enantioselectivities of the new derivatives were tested by separating the enantiomers of a series of medium-to-high volatility racemates in the flavour and fragrance field, and compared to those of the corresponding symmetrically substituted 6(I-VII)-O-TBDMS-2(I-VII),3(I-VII)-O-methyl-beta-CD (MeMe-CD) and 6(I-VII)-O-TBDMS-2(I-VII),3(I-VII)-O-ethyl-beta-CD (EtEt-CD), and were then applied to analysis of real-world essential oil (e.o.) samples. A new synthetic process including the sonochemical approach to obtain synthetic reproducibility and significant yields of the per-substituted derivatives with acceptable reaction times was developed. The results show that asymmetrically substituted methyl/ethyl CDs compared to the methyl or ethyl symmetrical derivatives in general provide better enantioselectivity in terms of both enantiomer resolution and number of separated chiral compounds, and show how the substitution pattern in positions 2 and 3 of the CD ring can influence the separation. Moreover, these new CD derivatives with better enantioselectivity are also shown to be very useful in routine analysis for the exhaustive control of samples containing several chiral characterizing markers in a single run., (Copyright 2009 Elsevier B.V. All rights reserved.)

This study describes the development of a gas chromatography-mass spectrometry (GC-MS) library to identify optically active compounds in the flavour and fragrance field using enantioselective GC with cyclodextrin derivatives (CDs) as chiral selectors in combination with MS. The library operates on the "interactive" combination of linear retention indices (I(T) values) in parallel to MS spectra, so as to identify enantiomers reliably and to measure EE and/or ER unequivocally. Since MS is not a selective probe to discriminate optical isomers, mass spectra (or diagnostic ions in SIM mode) are used to locate the enantiomer(s) in the chromatogram, and I(T) values to identify it(them) safely and reliably in particular in complex mixtures. The library has been built up through the following steps: Some applications of the library are also reported. (a) Selection of CD derivatives able to cover a wide range of racemate separations. Four cyclodextrin derivatives were used: 2,6-di-O-methyl-3-O-pentyl-beta-CD, 2,3-di-O-methyl-6-O-tert-butyldimethylsilyl-beta-CD, 2,3-di-O-ethyl-6-AO-tert-butyldimethylsilyl-beta-CD, and 2,3-di-O-acetyl-6-O-tert-butyldimethylsilyl-beta-CD. (b) Determination of the analytes' I(T) values and evaluation of their stability and reliability at both intra- and inter-laboratory level. (c) Determination of the range within which the I(T) of an enantiomer has to be correctly identified, i.e. determination of a common retention index allowance (RIA). (d) Construction of the library, at the moment comprising the enantiomers of 134 racemates. A record has been attributed to each enantiomer including I(T) values determined on the four CD coated columns, mass spectrum, IUPAC chemical names, CAS numbers, molecular weight, and, when separated, racemate enantiomer resolution on the CD investigated. Some applications of the library are also reported.