Search

Biotrickling filter (BTF) technology was applied for the treatment of waste gas containing a mixture of chlorobenzene and 1,2-dichlorobenzene. An adapted microbial community was immobilised on a structured packing material. The strategy followed was to reach high removal efficiencies at initially low mass loading rates followed by an increase of the latter. This procedure was successful and resulted in a short start-up period of only 2 weeks. A 3-month operation under steady-state conditions showed good performance, with >95% removal efficiency at a mass loading rate of 1,800 g m(-3) day(-1). Dimensionless concentration profiles showed that the chlorobenzenes were simultaneously degraded. Low dissolved organic carbon of 15 mg l(-1) and stoichiometric chloride concentrations in the trickling liquid indicated complete mineralisation of the pollutant. Transient-state experiments with five times higher mass loading rates caused a decrease in the removal efficiency that recovered rapidly once the mass loading rate returned to its original steady-state level. A progressive increase of the mass loading rate in a long-term performance experiment showed that the removal efficiency could be kept stable between 95 and 99% at loads of up to 5,200 g m(-3) day(-1) over several days. Above this mass loading rate, the elimination capacity did not increase any further. These results demonstrated that with a well-adapted inoculum and optimal operation parameters, a BTF system with excellent performance and stability that efficiently removes a mixture of chlorobenzene vapours from air can be obtained.

Production of biomass adapted to the degradation of a mixture of chlorobenzene (CB) and 1,2-dichlorobenzene (DCB) was investigated in a batch culture with substrates supplied by pulses. CB and o-DCB concentrations which gave the best adapted biomass productivity were determined and found to be 150 and 30 microl l(-1), respectively. The biomass productivity was 51 mg l(-1) h(-1). The biomass yield was 0.38 g of biomass dry weight per gram of substrate. The pulses of 200 microl CB and 40 microl o-DCB, were inhibitory to the bacterial culture. Among the metabolites, muconic acid was found in large quantities in the medium and in the cells. At a time between two pulses of 60 min, adding 150 microl CB and 30 microl o-DCB per each pulse, 7.6g l(-1) of biomass was obtained. The produced biomass served as an inoculum for the biotrickling filter which treated industrial waste gases contaminated by CBs. The method of adapted biomass production was described using CBs, but the degradation of any other toxic volatile pollutant can be improved using this technique.

A new bacterial strain capable of chlorobenzene degradation has been isolated from sludge of an industrial wastewater treatment plant. The micro-organism is short, rod-shaped, Gram-negative, yellow-pigmented and has been identified as Escherichia hermanii. It was observed that high chlorobenzene concentrations (up to 394 mg l-1) had low toxic effects towards this strain, which was able to degrade chlorobenzene without any previous adaptation.