Search

The aim of this work was to assess the potential benefits of the enrichment of a chitosan hydrogel patch with secretome and its epicardial implantation in a murine model of chronic ischemia, focusing on the potential to restore the functional capacity of the heart. Thus, a hydrogel with a final polymer concentration of 3 % was prepared from chitosan with an acetylation degree of 24 % and then bio-functionalized with a secretome produced by mesenchymal stromal cells. The identification of proteins in the secretomes showed the presence of several proteins known to have beneficial effects on cardiac muscle repair. Then chitosan hydrogels were immersed in secretome. The protein incorporation in the hydrogel and their release over time were studied, demonstrating the ability of the gel to retain and then deliver proteins (around 40 % was released in the first 6 h, and then a plateau was reached). Moreover, mechanical analysis exhibited that the patches remained suturable after enrichment. Finally, bio-functionalized hydrogel patches were sutured onto the surface of the infarcted myocardium in rat. Thirty days after, the presence of enriched hydrogels induced a reversion of cardiac function which seems to come mainly from an improvement of left ventricle systolic performance and contractility., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

In this study, a chitosan derivative with strong iron (III) chelating capabilities was developed by grafting the Deferoxamine (DFO) chelator to achieve a substitution degree of 3.8 ± 0.2 %. Through blending with ungrafted chitosan of low degree of acetylation (DA), a formulation able to form a physical hydrogels was formed in aqueous media, without the requirement of a cross-linking agent. The functionalization of chitosan with DFO led to xerogels exhibiting superior iron (III) chelation capacity and higher swelling when exposed to aqueous solutions, in comparison with to an unmodified chitosan xerogel. Notably, this material extracts iron (III) even against the strong iron chelator deferiprone. Furthermore, the material demonstrates selectivity for iron (III) chelation even in the presence of competing cations like copper (II) and zinc (II)., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: LUX reports financial support was provided by Agence Nationale de la Recherche (ANR). DAVID, SALAZAR ARIZA, MONTEMBAULT, LUX, TILLEMENT has patent #FR2110474 pending to MEXBRAIN. DAVID MONTEMBAULT, LUX, TILLEMENT has patent #FR2007997 pending to MEXBRAIN. The other authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Nucleic acid delivery requires vectorization for protection from nucleases, preventing clearance by the reticuloendothelial system, and targeting to allow cellular uptake. Nanovectors meeting the above specifications should be safe for the patient, simple to manufacture, and display long-term stability. Our nanovectors were obtained via the green process of polyelectrolyte complexation, carried out at 25 °C in water at a low shear rate using chitosan (a polycationic biocompatible polysaccharide of specific molar mass and acetylation degree) and dextran sulfate as a polyanionic biocompatible polysaccharide. These complexes formed nanoassemblies of primary nanoparticles (20-35 nm) and maintained their colloidal stability for over 1 year at 25 °C. They could be steam sterilized, and a model nucleic acid could be either encapsulated or surface adsorbed. A targeting agent was finally bound to their surface. This work serves as a proof of concept of the suitability of chitosan-based polyelectrolyte complexes as nanovectors by sequential multilayered adsorption of various biomacromolecules.

Background and Objectives: To test the long-term ability of human ovarian cortex cells to develop in unconventional culture conditions. Materials and Methods. Ovarian cortex cells from fetuses aged 23 to 39 weeks gestation were cultured for 90 days in hollow chitosan hydrogel micro-bioreactors and concurrently in traditional wells. Various cell-type counts were considered. Results : With intact follicles as a denominator, the percentage of growing intact follicles at Day 0 varied widely between ovaries (0 to 31.7%). This percentage tended to increase or stay relatively constant in bioreactor as in control cultures; it tended more toward an increase over time in bioreactor vs. control cultures. Modeled percentages showed differences (though not significant) in favor of bioreactor cultures (16.12% difference at D50 but only 0.12% difference at D90). With all follicles present as a denominator, the percentage of growing primary and secondary follicles at D0 varied widely between ovaries (0 to 29.3%). This percentage tended to increase over time in bioreactor cultures but to decrease in control cultures. Modeled percentages showed significant differences in favor of bioreactor cultures (8.9% difference at D50 and 11.1% difference at D90). At D50 and D90, there were only few and sparse apoptotic cells in bioreactor cultures vs. no apoptotic cells in control cultures. Conclusions : Over three months, bioreactor folliculogenesis outperformed slightly traditional culture. This is an interesting perspective for follicle preservation and long-term toxicological studies.

The wet spinning of cytocompatible, bioresorbable, and knittable chitosan (CTS) monofilaments would be advantageous for a variety of surgical applications. The complexation capacity of chitosan with Cu 2+ or Zn 2+ can be leveraged to enhance its antibacterial activity, but not at the expense of cytocompatibility. In this work, a wet-spinning process was adapted for the in situ incorporation of Cu 2+ or Zn 2+ with chitosan dopes to produce monofilaments at different drawing ratios (τ tot ) with various cation/glucosamine molar ratios, evaluated in the fibers ( r Cu,f and r Zn,f (Gram-). Knittability was tested by a specific tensile test using a knitting needle and evaluated with an industrial knitting machine. It was found that Staphylococcus epidermidis (Gram+) and Escherichia coli (Gram-). Knittability was tested by a specific tensile test using a knitting needle and evaluated with an industrial knitting machine. It was found that r Cu,f = 0.01 and r Zn,f = 0.03 significantly increase the antibacterial activity without compromising cytocompatibility. Wet spinning with τ tot = 1.6 allowed the production of knittable CTS-Cu monofilaments, as confirmed by knitting assays under industrial conditions.

We have previously shown that implantation of a fragmented chitosan hydrogel suspension (chitosan-FPHS) into a traumatic spinal cord lesion in adult rats led to significant axon regrowth and functional recovery, which was associated to a modulation of inflammation. Using an in vitro culture system, we show here that polarization of bone marrow-derived macrophages is indeed modified by direct contact with chitosan-FPHS. Reducing the degree of acetylation (DA) and raising the concentration of chitosan (Cp, from 1.5% to 3%), favors macrophage polarization toward anti-inflammatory subtypes. These latter also migrate and adhere efficiently on low, but not high DA chitosan-FPHS, both in vitro and in vivo, while inflammatory macrophages rarely invade a chitosan-FPHS implant in vivo, no matter the DA. Our in vitro model setup should prove a valuable tool for screening diverse biomaterial formulations and combinations thereof for their inflammatory potential prior to implantation in vivo., (© 2021 Wiley Periodicals LLC.)

In today's biomedical research, a huge effort is being made towards the development of efficient drug delivery systems, achieving sustainable and controlled delivery of drugs. Chitosan (CS) hydrogels are high water content materials with very relevant biological properties to that purpose. Their use for a local and delayed delivery has already been demonstrated for a wide variety of therapeutic agents. One relatively recent strategy to improve these CS-based systems consists in the insertion of colloids, embedding drugs, within their three-dimensional matrix. This provides a second barrier to the diffusion of drugs through the system, and allows to better control their release. The main objective of this review is to report the many existing complex systems composed of CS hydrogels embedding different types of colloids used as drug delivery devices to delay the release of drugs. The various biomedical applications of such final systems are also detailed in this review., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

In this work, nanocomposites that combine mucopenetrating and mucoadhesive properties in a single system are proposed as innovative strategy to increase drug residence time in the intestine following oral administration. To this aim, novel mucoadhesive chitosan (CH) sponges loaded with mucopenetrating nanoemulsions (NE) were developed via freeze-casting technique. The NE mucopenetration ability was determined studying the surface affinity and thermodynamic binding of the nanosystem with mucins. The ability of nanoparticles to penetrate across a preformed mucins layer was validated by 3D-time laps Confocal Laser Scanning Microscopy imaging. Microscopy observations (Scanning Electron Microscopy and Optical Microscopy) showed that NE participated in the structure of the sponge affecting its stability and in vitro release kinetics. When incubated with HCT 116 and Caco-2 cell lines, the NE proved to be cytocompatible over a wide concentration range. Finally, the in vivo biodistribution of the nanocomposite was evaluated after oral gavage in healthy mice. The intestinal retention of NE was highly enhanced when loaded in the sponge compared to the NE suspension. Overall, our results demonstrated that the developed nanocomposite sponge is a promising system for sustained drug intestinal delivery., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This work explores the epicardial implantation of acellular chitosan hydrogels in two murine models of cardiomyopathy, focusing on their potential to restore the functional capacity of the heart. Different chitosan hydrogels were generated using polymers of four degrees of acetylation, ranging from 2.5% to 38%, because the degree of acetylation affects their degradation and biological activity. The hydrogels were adjusted to a 3% final polymer concentration. After complete macromolecular characterization of the chitosans and study of the mechanical properties of the resulting hydrogels, they were sutured onto the surface of the myocardium, first in rat after four-weeks of coronary ligation (n=58) then in mice with cardiomyopathy induced by a cardiac-specific invalidation of serum response factor (n=20). The implantation of the hydrogels was associated with a reversion of cardiac function loss with maximal effects for the acetylation degree of 24%. The extent of fibrosis, the cardiomyocyte length-to-width ratio, as well as the genes involved in fibrosis and stress were repressed after implantation. Our study demonstrated the beneficial effects of chitosan hydrogels, particularly with polymers of high degrees of acetylation, on cardiac remodeling in two cardiomyopathy models. Our findings indicate they have great potential as a reliable therapeutic approach to heart failure., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier Ltd.)

Sustainable and controlled delivery of drugs is at the centre of a huge amount of undertaken researches. The ability of hydrogels, high water content materials, to achieve a local and delayed-delivery has already been demonstrated for a wide variety of therapeutic agents and various polymer natures. In particular, chitosan, a natural polymer, stands out as a first choice material for hydrogels elaboration in biomedical, cosmetic, and health related applications, owing to its interesting properties (as biocompatibility, biodegradability, antimicrobial capacity, and mucoadhesivity). Moreover, chitosan also allows drugs to go easier through biological barriers. The main objective of this review is to report the various uses of chitosan hydrogels as drug delivery devices to control and/or delay the release of drugs loaded into their three dimensional matrix. A wide spectrum of corresponding biomedical applications of these systems can be encountered in the literature, whatever the physicochemical nature of drugs (hydrophilic, hydrophobic, macromolecular), as detailed in this review., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Current pulpotomy is limited in its ability to induce regeneration of the dental-pulp (DP) complex. Hydrogels are reported to be well-suited for tissue engineering and are unlikely to induce an inflammatory response that might damage the remaining tissue. The present study investigated the molecular and cellular actors in the early inflammatory/immune response and deciphered M1/M2 macrophage polarisation to a chitosan-enriched fibrin hydrogel in pulpotomised rat incisors. Both fibrin and fibrin-chitosan hydrogels induced a strong increase in interleukin-6 (IL-6) transcript in the DP when compared to the DP of untreated teeth. Gene expression of other inflammatory mediators was not significantly modified after 3 h. In the viable DP cell population, the percentage of leukocytes assessed by flow cytometry was similar to fibrin and fibrin-chitosan hydrogels after 1 d. In this leukocyte population, the proportion of granulocytes increased beneath both hydrogels whereas the antigen-presenting cell, myeloid dendritic cells, T cells and B cells decreased. The natural killer (NK) cell population was significantly decreased only in DPs from teeth treated with fibrin-chitosan hydrogel. Immunolabeling analysis of the DP/hydrogel interface showed accumulation of neutrophil granulocytes in contact with both hydrogels 1 d after treatment. The DP close to this granulocyte area contained M2 but no M1 macrophages. These data collectively demonstrated that fibrin-chitosan hydrogels induced an inflammatory/immune response similar to that of the fibrin hydrogel. The results confirmed the potential clinical use of fibrin-chitosan hydrogel as a new scaffold for vital-pulp therapies.

This work describes the characterization of an original liposomes/hydrogel assembly, and its application as a delayed-release system of antibiotics and anaesthetics. This system corresponds to drug-loaded liposomes entrapped within a chitosan (CS) physical hydrogel. To this end, a suspension of pre-formed 1,2-dipalmitoyl-sn-glycero-3-phosphocoline liposomes loaded with an antibiotic (rifampicin, RIF), an anaesthetic (lidocaine, LID), or a model fluorescent molecule (carboxyfluorescein, CF), was added to a CS solution. The CS gelation was subsequently carried out without any trace of chemical cross-linking agent or organic solvent in the final system. Liposomes within the resulting gelled CS matrix were characterized for the first time by environmental scanning electron microscopy. The release of drugs from the assembly was investigated by fluorescence or UV spectroscopy. The cumulative release profiles of RIF and LID (and also CF for comparison) were found to be lower from the "drug-in-liposomes-in-hydrogel" (DLH) assembly in comparison to "drug-in-hydrogel" (DH) system., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Porous collagen/chitosan scaffolds with different Collagen:Chitosan (Coll:Ch) ratios were prepared by freeze-drying followed by self-crosslinking via dehydrothermal treatment (DHT) and characterized as biomaterials for tissue engineering. Cy7 and Cy5.5 fluorochromes were covalently grafted to collagen and chitosan, respectively. Thus, it was possible, using optical fluorescence imaging of the two fluorochromes, to simultaneously track their in vivo biodegradation, in a blend scaffold form. The fluorescence signal evolution, due to the bioresorption, corroborated with histological analysis. In vitro cytocompatibility of Coll:Ch blend scaffolds were evaluated with standardized tests. In addition, the scaffolds showed a highly interconnected porous structure. Extent of crosslinking was analyzed by convergent analysis using thermogravimetry, Fourier Transform Infrared Spectroscopy and PBS uptake. The variations observed with these techniques indicate strong interactions between collagen and chitosan (covalent and hydrogen bonds) promoted by the DHT. The mechanical properties were characterized to elucidate the impact of the different processing steps in the sample preparation (DHT, neutralization and sterilization by β-irradiation) and showed a robust processing scheme with low impact of Coll:Ch composition ratio., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This work emphazises the importance of the solubilizing conditions for the elaboration of chitosan hydrogel beads, which were produced using electromagnetic laminar jet breakup technology, resulting in dried porous beads by further freeze-drying. Paramaters such as the acid nature and concentration (acetic, formic, citric, lactic, maleic and malic, 0.1 to 0.5 mol·L -1 ), the chitosan concentration (2 to 5 wt%) and composition of the gelation bath (NaOH, with or without EtOH) were studied. Viscosity versus strain rate measurements were carried out on chitosan acidic solutions and the viscoelastic behaviour was studied on hydrogels. The solutions exhibiting the highest viscosities led to the stiffest macrohydrogels, as a result of chitosan carboxylate interactions. Specific surface areas of the freeze-dried beads were determined in the range from 12 to 107 m 2 ·g -1 . Their internal texture was observed by Scanning Electron Microscopy. Water uptake was also measured for further use in the field of water purification., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Objective: Regenerating a functional dental pulp in the pulpectomized root canal has been recently proposed as a novel therapeutic strategy in dentistry. To reach this goal, designing an appropriate scaffold able to prevent the growth of residual endodontic bacteria, while supporting dental pulp tissue neoformation, is needed. Our aim was to create an innovative cellularized fibrin hydrogel supplemented with chitosan to confer this hydrogel antibacterial property., Methods: Several fibrin-chitosan formulations were first screened by rheological analyses, and the most appropriate for clinical use was then studied in terms of microstructure (by scanning electron microscopy), antimicrobial effect (analysis of Enterococcus fæcalis growth), dental pulp-mesenchymal stem/stromal cell (DP-MSC) viability and spreading after 7 days of culture (LiveDead ® test), DP-MSC ultrastructure and extracellular matrix deposition (transmission electron microscopy), and DP-MSC proliferation and collagen production (RT-qPCR and immunohistochemistry)., Results: A formulation associating 10mg/mL fibrinogen and 0.5% (w/w), 40% degree of acetylation, medium molar mass chitosan was found to be relevant in order to forming a fibrin-chitosan hydrogel at cytocompatible pH (# 7.2). Comparative analysis of fibrin-alone and fibrin-chitosan hydrogels revealed a potent antibacterial effect of the chitosan in the fibrin network, and similar DP-MSC viability, fibroblast-like morphology, proliferation rate and type I/III collagen production capacity., Significance: These results indicate that incorporating chitosan within a fibrin hydrogel would be beneficial to promote human DP tissue neoformation thanks to chitosan antibacterial effect and the absence of significant detrimental effect of chitosan on dental pulp cell morphology, viability, proliferation and collagenous matrix production., (Copyright © 2019 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

Aims: The need for small caliber vessels to treat cardiovascular diseases has grown. However, synthetic polymers perform poorly in small-diameter applications. Chitosan hydrogels can provide a novel biological scaffold for vascular engineering. The goal of this study was to explore host cell and tissue behavior at the interface with chitosan-based scaffolds in vitro and in vivo., Methods and Results: in vitro, we assessed the ability of endothelial cells lining chitosan hydrogels to produce tissue factor (TF), thrombomodulin (TM) and nitric oxide. We showed that endothelial cells behave as a native endothelium since under stimulation, TF and TM expression increased and decreased, respectively. Endothelial cells seeded on chitosan produced nitric oxide, but no change was observed under stimulation. After in vivo subcutaneous implantation of chitosan hydrogels in rats, macrophage activation phenotypes, playing a crucial role in biomaterial/tissue, were explored by immunohistochemistry. Our results suggested a balance between pro- and anti-inflammatory signals since we observed an inflammatory response in favor of macrophage M2 phenotype., Conclusion: in vitro exploration of endothelial cell response at the interface with chitosan hydrogel showed a functional endothelium and in vivo exploration of tissue response revealed a biointegration of chitosan hydrogels.

Bone substitute fabrication is of interest to meet the worldwide incidence of bone disorders. Physical chitosan hydrogels with intertwined apatite particles were chosen to meet the bio-physical and mechanical properties required by a potential bone substitute. A set up for 3-D printing by robocasting was found adequate to fabricate scaffolds. Inks consisted of suspensions of calcium phosphate particles in chitosan acidic aqueous solution. The inks are shear-thinning and consist of a suspension of dispersed platelet aggregates of dicalcium phosphate dihydrate in a continuous chitosan phase. The rheological properties of the inks were studied, including their shear-thinning characteristics and yield stress. Scaffolds were printed in basic water/ethanol baths to induce transformation of chitosan-calcium phosphates suspension into physical hydrogel of chitosan mineralized with apatite. Scaffolds consisted of a chitosan polymeric matrix intertwined with poorly crystalline apatite particles. Results indicate that ink rheological properties could be tuned by controlling ink composition: in particular, more printable inks are obtained with higher chitosan concentration (0.19 mol·L -1 ).

Chitosan hydrogel and adipose derived stem cells (ADCS) have been reported as the optimal partnership for colorectal tissue engineering. In that field, the aim of the current experiment was to assess the interest of seeding ADSC on chitosan hydrogel patches in an in vivo comparative study and on a tube intended replace a colonic segment in an in vivo feasibility study. In the comparative study, a 2 × 3 cm colonic wall defect was performed in 20 swine and repaired by suturing a chitosan hydrogel patch: acellular matrix (group A, n = 10) versus matrix seeded with autologous stromal vascular fraction (SVF) (group B, n = 10). In the feasibility study, a circular colonic section was performed and a 2-cm-length chitosan hydrogel tube (seeded with autologous SVF) was implanted between the two edges of the colon in 3 pigs. Graft areas were explanted at 8 weeks for examinations. Endpoints were technical feasibility, fibrosis ratio, and smooth muscle layer regeneration. A complete coverage of the patched area was observed with an ad integrum regeneration of the colonic wall including smooth muscle cells layer around a thin fibrosis scare. Fibrosis ratio was significantly lower group B: 13% versus 55% (p = 0.013). Segmental colonic replacement appeared accurate. Our data confirmed in a large animal model the healing effect of chitosan on colorectal tissue. The very low rate of the fibrosis ratio in the cellularized group emphasizes inflammatory control effect of the chitosan hydrogel and SVF association. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 460-467, 2018., (© 2017 Wiley Periodicals, Inc.)

Vascular grafts made of synthetic polymers perform poorly in cardiac and peripheral bypass applications. In these applications, chitosan-based materials can be produced and shaped to provide a novel scaffold for vascular tissue engineering. The goal of this study was to evaluate in vitro the mechanical properties of a novel chitosan formulation to assess its potential for this scaffold. Two chitosan-based hydrogel tubes were produced by modulating chitosan concentration. Based on the standard ISO 7198:1998, the hydrogel tubes were characterized in vitro in terms of suture retention strength, tensile strength, compliance, and burst pressure. By increasing chitosan concentration, suture retention value increased to reach 1.1 N; average burst strength and elastic moduli also increased significantly. The compliance seemed to exhibit a low value for chitosan tubes of high concentration. By modulating chitosan concentration, we produced scaffolds with suitable mechanical properties to be implanted in vivo and withstand physiological blood pressures.

Aims: Vascular grafts made of synthetic polymers perform poorly in small-diameter applications (cardiac and peripheral bypass). Chitosan is a biocompatible natural polymer that can provide a novel biological scaffold for tissue engineering development. The goal of this study was to demonstrate the biocompatibility of a novel chitosan preparation in vitro and in vivo, and to assess its potential as a scaffold for vascular applications., Methods and Results: A series of experiments of increasing complexity, ranging from in vitro biocompatibility and hemocompatibility tests to in vivo studies in small and large animals (rats and sheep), was performed to provide a comprehensive analysis of chitosan hydrogels' biological properties. In vitro studies established that: (i) chitosan supported human endothelial progenitor cells adhesion, proliferation and resistance to physiological shear stress; (ii) chitosan did not activate platelets, the complement system, or the intrinsic coagulation pathway. In vivo results showed: (iii) no resorption of chitosan and no chronic inflammation at 60 days in a rat heterotopic implantation model (magnetic resonance imaging and histology); (iv) no flow obstruction (Doppler ultrasound) and no thrombus formation (histology and scanning electron microscopy) at 2 h after a carotid arteriotomy repair with chitosan patches in sheep. Finally, two chitosan tubes were implanted as carotid interposition grafts for 3 days in sheep showing that chitosan was strong enough to be sutured, to withstand arterial pressure, and no flow obstruction was observed through this short period., Conclusion: Chitosan-based hydrogels displayed promising in vitro biocompatibility and hemocompatibility properties as well as in vivo short-term performance.

Recovery from traumatic spinal cord injury (SCI) usually fails due to a cascade of cellular and molecular events that compromise neural tissue reconstitution by giving rise to glial scarring and cavity formation. We designed a scaffold material for SCI treatment containing only chitosan and water as fragmented physical hydrogel suspension (Chitosan-FPHS), with defined degree of acetylation (DA), polymer concentration, and mean fragment size. Implantation of Chitosan-FPHS alone into rat spinal cord immediately after a bilateral dorsal hemisection promoted reconstitution of spinal tissue and vasculature, and diminished fibrous glial scarring: with astrocyte processes primarily oriented towards the lesion, the border between lesion site and intact tissue became permissive for regrowth of numerous axons into, and for some even beyond the lesion site. Growing axons were myelinated or ensheathed by endogenous Schwann cells that migrated into the lesion site and whose survival was prolonged. Interestingly, Chitosan-FPHS also modulated the inflammatory response, and we suggest that this might contribute to tissue repair. Finally, this structural remodeling was associated with significant, long-lasting gain in locomotor function recovery. Because it effectively induces neural tissue repair, Chitosan-FPHS biomaterial may be a promising new approach to treat SCI, and a suitable substrate to combine with other strategies., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Polyelectrolyte complexes (PECs) were prepared from Chitosan (CS) and Hyaluronic Acid (HYA) homogeneous mixtures of aqueous solutions. The method consisted of preparing a homogeneous mixture of the two polysaccharides via charge screening at high salt concentrations. Then, the mixture was dialyzed, leading to the controlled self-assembly of the two polyelectrolytes. Critical parameters like the chitosan degree of acetylation (DA) and molar mass (Mw), the residual salt concentration and the molar charge ratio r=nNH3(+) (CS)/nCOO(-) (HYA) accounted for the transition from homogeneous aqueous solutions to colloidal suspensions (r=0.1) or gel coacervates (r=0.5). The influence of the DA and Mw of CS was evaluated by visual observations, light scattering and rheological measurements. For low values of r, Small Angle X-ray Scattering (SAXS) experiments revealed that the HYA nanostructure was weakly affected by the presence of PECs. On the contrary, the structure was impacted when increasing r, revealing a heterogeneous aggregate morphology with ladder-like chain interactions., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The formation of chitosan hydrogels without any external cross-linking agent was successfully achieved by inducing the gelation of a viscous chitosan solution with aqueous NaOH or gaseous NH3. The hydrogels produced from high molecular weight (Mw ≈ 640 000 g mol(-1)) and extensively deacetylated chitosan (DA ≈ 2.8%) at polymer concentrations above ∼2.0% exhibited improved mechanical properties due to the increase of the chain entanglements and intermolecular junctions. The results also show that the physicochemical and mechanical properties of chitosan hydrogels can be controlled by varying their polymer concentration and by controlling the gelation conditions, that is, by using different gelation routes. The biological evaluation of such hydrogels for regeneration of infarcted myocardium revealed that chitosan hydrogels prepared from 1.5% polymer solutions were perfectly incorporated onto the epicardial surface of the heart and presented partial degradation accompanied by mononuclear cell infiltration.

Objective: Tissue engineering may provide new operative tools for colorectal surgery in elective indications. The aim of this study was to define a suitable bioscaffold for colorectal tissue engineering., Methods: We compared 2 bioscaffolds with in vitro and in vivo experiments: porcine small intestinal submucosa (SIS) versus chitosan hydrogel matrix. We assessed nontoxicity of the scaffold in vitro by using human adipose-derived stem cells (hADSC). In vivo, a 1 × 2-cm colonic wall defect was created in 16 rabbits. Animals were divided randomly into 2 groups according to the graft used, SIS or chitosan hydrogel. Graft area was explanted at 4 and 8 weeks. The end points of in vivo experiments were technical feasibility, behavior of the scaffold, in situ putative inflammatory effect, and the quality of tissue regeneration, in particular smooth muscle layer regeneration., Results: In vitro, hADSC attachment and proliferation occurred on both scaffolds without a substantial difference. After proliferation, hADSCs kept their mesenchymal stem cell characteristics. In vivo, one animal died in each group. Eight weeks after implantation, the chitosan scaffold allowed better wound healing compared with the SIS scaffold, with more effective control of inflammatory activity and an integral regeneration of the colonic wall including the smooth muscle cell layer., Conclusion: The outcomes of in vitro experiments did not differ greatly between the 2 groups. Macroscopic and histologic findings, however, revealed better wound healing of the colonic wall in the chitosan group suggesting that the chitosan hydrogel could serve as a better scaffold for colorectal tissue engineering., (Copyright © 2015 Elsevier Inc. All rights reserved.)

This work deals with the elaboration of an original biosystem in view of its application as drug delayed-release device in biomedical area. This innovative "hybrid" system is composed of phosphatidylcholine liposomes entrapped within a chitosan physical hydrogel (only constituted of polymer and water). To this end, pre-formed liposomes were suspended into chitosan solutions, and the polymer gelation process was subsequently carried out following particular experimental conditions. This liposome incorporation did absolutely not prevent the gel formation as shown by rheological properties of the resulting tridimensional matrix. The presence of liposomes within the hydrogel was confirmed by fluorescence and cryo-scanning electron microscopies. Then, the expected concept of delayed-release of this "hybrid" system was proved using a model water soluble molecule (carboxyfluorescein, CF) encapsulated in liposomes, themselves incorporated into the chitosan hydrogel. The CF release was assayed after repeated and intensive washings of hydrogels, and was found to be higher in the CF-in-hydrogel systems in comparison with the CF-in-liposomes-in-hydrogel ones, demonstrating a CF delayed-release thanks to lipid vesicles., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

A new generation of dermal filler for wrinkle filler based on chitosan was compared to current hyaluronic acid-based dermal fillers by using a new rheological performance criterion based on viscosity during injection related to Newtonian viscosity. In addition an in vivo evaluation was performed for preclinical evidence of chitosan use as dermal filler. In this way, biocompatibility and dermis reconstruction was evaluated on a pig model.

Polysaccharide-based hydrogels are remarkable materials for the development of tissue engineering strategies as they meet several critical requirements for such applications and they may partly mimic the extracellular matrix. Chitosan is widely envisioned as hydrogel in biomedical fields for its bioresorbability, biocompatibility, and fungistatic and bacteriostatic properties. In this study, we report that the modulation of the polymer concentration, the degree of acetylation, the gelation processes [or neutralization routes (NR)] in the preparation of different chitosan-based hydrogels lead to substantially and significantly different biological responses. We show that it is possible to tune the physicochemical characteristics, mechanical properties, and biological responses of such matrices. Physical hydrogels prepared from highly acetylated chitosan were softer, degraded quickly in vivo, and were not suitable for in vitro culture of human mesenchymal stem and progenitor derived endothelial cells. In contrast, for a same chitosan concentration and obtained by the same processing route, a low degree of acetylation chitosan hydrogel provided a more elastic material, better cell adhesion on its surface and tissue regeneration, and restored tissue neo-vascularization as well. This work offers promising and innovative perspectives for the design of hydrogel materials with tunable properties for tissue engineering and regenerative medicine., (© 2013 Society of Plastics Engineers.)

Tissue-engineered biodegradable medical devices are widely studied and systems must present suitable balance between versatility and elaboration simplicity. In this work, we aim at illustrating that such equilibrium can be found by processing chitosan physical hydrogels without external cross-linker. Chitosan concentration, degree of acetylation, solvent composition, and neutralization route were modulated in order to obtain hydrogels exhibiting different physico-chemical properties. The resulting in vivo biological response was investigated by scanning electron microscopy. "Soft" hydrogels were obtained from chitosan of high degree of acetylation (35%) and by the neutralization with gaseous ammonia of a chitosan acetate aqueous solutions presenting low polymer concentration (Cp=1.6% w/w). "Harder" hydrogels were obtained from chitosan with lower degree of acetylation (5%) and after neutralization in sodium hydroxide bath (1M) of hydro-alcoholic chitosan solutions (50/50 w/w water/1,2-propanediol) with a polymer concentration of 2.5% w/w. Soft and hard hydrogels exhibited bioresorption times from below 10 days to higher than 60 days, respectively. We also evidenced that cell colonization and neo-vascularization mechanisms depend on the hydrogel-aggregated structure that is controlled by elaboration conditions and possibly in relation with mechanical properties. Specific processing conditions induced micron-range capillary formation, which can be assimilated to colonization channels, also acting on the resorption scenario., (Copyright © 2014 Elsevier B.V. All rights reserved.)

We investigated the spinning of hydroalcoholic chitosan solutions. The dope composition was optimized in order to obtain a continuous alcogel fiber by water evaporation on heating the extruded hydroalcoholic solution. This alcogel fiber was then neutralized in aqueous alkali baths and washed in water to eliminate the residual alcohol and salts before final drying. Depending on the alcohol content in the filament at the neutralization step, on specific alcohol-chitosan interactions and on the nature and concentration of the coagulation base, the process yielded semicrystalline chitosan fibers with different proportions of anhydrous and hydrated allomorphs. Contrarily to the classical annealing method, the formation of mainly anhydrous crystals was obtained without significant molecular weight decrease by neutralizing the polymer in hydrophobic conditions. The control of allomorph content was shown to be related to the hydrophobicity of the solvent (alcohol fraction) at the neutralization step., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

In this study, new materials capable of reversible self-assembly, based on concentrated negatively charged poly(lactic acid) nanoparticles and chitosan, a natural polycationic polymer, were successfully fabricated. Electrostatic interactions between oppositely charged components along with weaker interactions led to the formation of a 3D network. The resulting macroscopic assemblies were characterized by dynamic mechanical measurements, and the influences of various parameters such as chitosan/poly(lactic acid) weight ratio, duration and temperature of the mixture, and molecular weight or chitosan degree of acetylation were studied. Our results showed that the mechanical properties of assemblies were highly dependent on the nanoparticle solid content and chitosan/nanoparticle ratio. In particular, at an optimum weight ratio the colloidal assemblies exhibited remarkable high elastic moduli (about 300 kPa) for a particle solid content of 18% w/w. Thanks to the weak and reversible nature of the interactions, these materials exhibited shear thinning properties, and could instantly recover their cohesiveness at rest. The mode of interactions between PLA particles and chitosan was shown to be in part due to electrostatic interactions, but the cross-linking of chitosan-covered particles was attributed to hydrogen bonding. These materials could be envisaged as good candidates for injectable scaffolds for tissue engineering, taking advantage of the biocompatibility and bioactivity of both components. However, some issues concerning temperature stability must be resolved before applying these colloidal assemblies to cell growth in physiological conditions.

The electrodeposition of hydrogels provides a programmable means to assemble soft matter for various technological applications. We report an anodic method to deposit hydrogel films of the aminopolysaccharide chitosan. Evidence suggests the deposition mechanism involves the electrolysis of chloride to generate reactive chlorine species (e.g., HOCl) that partially oxidize chitosan to generate aldehydes that can couple covalently with amines (presumably through Schiff base linkages). Chitosan's anodic deposition is controllable spatially and temporally. Consistent with a covalent cross-linking mechanism, the deposited chitosan undergoes repeated swelling/deswelling in response to pH changes. Consistent with a covalent conjugation mechanism, proteins could be codeposited and retained within the chitosan film even after detergent washing. As a proof-of-concept, we electroaddressed glucose oxidase to a side-wall electrode of a microfabricated fluidic channel and demonstrated this enzyme could perform electrochemical biosensing functions. Thus, anodic chitosan deposition provides a reagentless, single-step method to electroaddress a stimuli-responsive and biofunctionalized hydrogel film.

We investigated the bioactivity of new chitosan-based multi-membrane hydrogel (MMH) architectures towards chondrocyte-like cells. The microstructure of the hydrogels constituting the membranes precludes any living cell penetration, whereas their lower scale architecture allows the protein diffusion. The biological behavior of chondrocytes implanted within the MMH inter-membrane spaces was studied for 45 days in culture. Chondrocytes formed cell aggregates and proliferated without loosing their chondrogenic phenotype as illustrated by collagen II and aggrecan expressions at the mRNA and protein levels. Cells produced neo-formed alcyan blue matrix proteins filling MMH interspaces. The HiF-2α/SOX9 pattern of expression suggested that the elevated chondrocytic phenotype in MMH could be related to a better hypoxic local environment than in classical culture conditions. Pro-inflammatory markers were not expressed during the period of culture. The low level of nitric oxide accumulation within the inter-membrane spaces and in the incubation medium implied that chitosan consumed nitrites produced by entrapped chondrocytes, in relation with the decrease of its molecular weight of 50%. Our data suggest that MMH structures may be considered as complex chondrocytic cell bioreactors; "active decoys of biological media", potentially promising for various biomedical applications like the inter-vertebral disk replacement., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Physical chitosan hydrogels are potential biomaterials for several biomedical applications, such as wound healing, tissue repair, and drug delivery. Controlling the microstructural organization of chitosan gels is one of the keys for monitoring the physical, mechanical, and biological properties. As a result, the main objective of the present work was to explore the microstructural organization of chitosan hydrogels in relation with the processing conditions of gelation. For this purpose, different gelation routes were studied, that is, chitosan solution neutralization of an aqueous or hydroalcoholic solution and neutralization of an alco-gel. Overall, the resulting morphology after processing was determined by the medium viscosity during neutralization and the nature and concentration of the base. The effect of these processing parameters on the morphology was evaluated mainly through small angle light scattering (SALS) measurements including in situ measurements during chitosan neutralization. As a result, we reported different bulk microstructures consisting in 200-400 nm aggregates (primary particles) agglomerated into micrometer range clusters or arranged into more organized structures, that is, forming microchannels (4-6 μm). We thus established a qualitative and quantitative relation between supramolecular morphology and gelation conditions of chitosan hydrogels.

This work deals with chain ordering in aqueous and water-alcohol solutions of chitosan. The so-called polyelectrolyte peak is investigated by small-angle synchrotron X-ray scattering. The polyelectrolyte microstructure was characterized by the position of the maximum of the polyelectrolyte scattering peak qmax, which scales with the polymer concentration cp as qmax approximately cp alpha. An evolution of the power law exponent alpha is observed as a function of the degree of acetylation (DA) of chitosan, which is responsible for changes of both the charge density (f) and the hydrophobicity of the polymer chains. The results highlighted the two organization regimes of the theory of Dobrynin and Rubinstein, investigated here for the first time for a natural polymer. At low DAs, alpha approximately 1/2, in agreement with a pearl necklace organization where the structure is controlled by the string between pearls. For higher DA, alpha approximately 1/3, and the correlation revealed by the polyelectrolyte peak is controlled by the pearls. This analysis offers a way to study quantitatively the balance between solvophobic-solvophilic interactions that play an important role in the solution properties of natural polymers. In addition, the role of several parameters acting on the interaction balance were evidenced, such as the nature of the counterion, the composition of the solvent (amount of alcohol in the aqueous solution), and the screening of Coulombic forces by salt addition. Finally, the nanostructure transition from a polyelectrolyte solution to a physical gel is discussed. The gel state is reached when the solvophobic interactions are favored, but depending on the gelation route the polyelectrolyte ordering could be preserved or not.

The cartilage tissue has a limited self-regenerative capacity. Tissue-engineering represents a promising trend for cartilage repair. The present study was aimed to develop a biomaterial formulation by combining fragments of chitosan hydrogel with isolated rabbit or human chondrocytes. We first reported the properties of the constructs elaborated with rabbit chondrocytes and pure chitosan physical hydrogels with defined molecular weight, acetylation degree and polymer concentration. Morphological data showed that chondrocytes were not penetrating the hydrogels but tightly bound to the surface of the fragments and spontaneously formed aggregates of combined cell/chitosan. A significant amount of neo-formed cartilage-like extracellular matrix (ECM) was first accumulated in-between cells and hydrogel fragments and furthermore was widely distributed within the neo-construct. The optimal biological response was obtained with hydrogel fragments concentrated at 1.5% (w/w) of polymer made from a chitosan with a degree of acetylation between 30 and 40%. Such hydrogels were then mixed with human chondrocytes. The phenotype of the cells was analyzed by using chondrocytic (mRNA expression of mature type II collagen and aggrecan as well as secretion of proteoglycans of high molecular weight) and non chondrocytic (mRNA expression of immature type II collagen and type I collagen) molecular markers. As compared with human chondrocytes cultured without chitosan hydrogel which rapidly dedifferentiated in primary culture, cells mixed with chitosan rapidly loose the expression of type I and immature type II collagen while they expressed mature type II collagen and aggrecan. In these conditions, chondrocytes maintained their phenotype for as long as 45 days, thus forming cartilage-like nodules. Taken together, these data suggest that a chitosan hydrogel does not work as a scaffold, but could be considered as a decoy of cartilage ECM components, thus favoring the binding of chondrocytes to chitosan. Such a biological response could be described by the concept of reverse encapsulation.

The formation of chitosan physical hydrogels without any external cross-linking agent was studied. The gelation took place in an acetic acid-water-propanediol solution. The time to reach the gel point was determined by rheometry and gelations from different initial conditions could be compared. The influence of different parameters on gelation such as the polymer concentration, the degree of acetylation (DA) of chitosan and the composition of the initial solvent were investigated. The fractal morphology of the sample was not affected by the composition of the system. The number of junctions per unit volume at the gel point varied only with the initial number of chain entanglements per unit volume. Then, below an initial concentration of 1.5% (w/w), physical chain entanglements were insufficient and more junctions had to be formed to induce gelation. Over this value, only the kinetics allowing to replace entanglements by stable physical junctions played a key parameter. This kinetics was influenced by several parameters such as DA, temperature or the initial proportion water/alcohol. The acetyl groups played an important role in the formation of hydrophobic interactions, mainly responsible for gelation. The study of the influence of the gelation media revealed two critical points at 40% and 70% of water in the initial solvent, probably due to conformational changes and then to different modes of gelation. These physical hydrogels being used for cartilage regeneration, their final rheological properties were studied as a function of their degree of acetylation, the polymer concentration and the solvent composition in the initial solvent. Our results allowed us to define an optimal gelation condition for our application, corresponding to: DA=40%, a proportion water/alcohol of 50/50 and a polymer concentration of 1.5%.

A new process of formation of chitosan physical hydrogels in aqueous solution, without any organic solvent or cross-linking additive, was studied. The three conditions required for the physical gelation were an initial polymer concentration over C*, a critical value of the balance between hydrophilic and hydrophobic interactions, and a physicochemical perturbation responsible for a bidimensional percolating mechanism. The time necessary to reach the gel point was determined by rheometry, and gelations were compared according to different initial conditions. Thus, we investigated the influence of the polymer concentration and the degree of acetylation (DA) of chitosan on gelation. The number of junctions per unit volume at the gel point varied with the initial polymer concentration, i.e., the initial number of chain entanglements per unit volume or the number of gel precursors. The time to reach the gel point decreased with both higher DAs and concentrations. For a chitosan of DA = 36.7%, a second critical initial concentration close to 1.8% (w/w) was observed. Above this concentration, the decrease of the time to reach the gel point was higher and fewer additional junctions had to be formed to induce gelation. To optimize these physical hydrogels, to be used for cartilage regeneration, their final rheological properties were studied as a function of their degree of acetylation and their polymer concentration. Our results allowed us to define the most appropriate gel for the targeted application corresponding to a final concentration of chitosan in the gel of near 1.5% (w/w) and a DA close to 40%.

The formation of chitosan physical hydrogels without any external cross-linking agent was studied. This gelation took place in an acetic acid-water-propanediol solution. Static light scattering was used to detect the gel point and then, to study the gelation for different initial conditions. Thus, we investigated the influence of the degree of acetylation, the gelation temperature and the nature of the initial solvent. The variation of the solvent composition during gelation was determined from a simple weighting, and the ionisation state of the polymer at the gel point, by pH titrations. This work showed that it was possible to form a chitosan physical-hydrogel, whatever the degree of acetylation provided typical conditions were observed. The mechanism of gelation simply consisted in the modification of the hydrophilic/hydrophobic balance allowing the formation of both hydrophobic interactions and hydrogen bonding. Several parameters had an important role on this mechanism: 1--the apparent charge density of chitosan, modified by the degree of neutralisation, 2--the dielectric constant of the solvent, related to the composition of the medium, 3--the degree of acetylation, 4--temperature, playing a role on the interactions responsible for the physical cross-linking and the molecular mobility, and, 5--the molecular mobility depending on possible changes of conformation, steric hindrance and viscosity of the medium.

Current pulpotomy is limited in its ability to induce regeneration of the dental-pulp (DP) complex. Hydrogels are reported to be well-suited for tissue engineering and are unlikely to induce an inflammatory response that might damage the remaining tissue. The present study investigated the molecular and cellular actors in the early inflammatory/immune response and deciphered M1/M2 macrophage polarisation to a chitosan-enriched fibrin hydrogel in pulpotomised rat incisors. Both fibrin and fibrin-chitosan hydrogels induced a strong increase in interleukin-6 (IL-6) transcript in the DP when compared to the DP of untreated teeth. Gene expression of other inflammatory mediators was not significantly modified after 3 h. In the viable DP cell population, the percentage of leukocytes assessed by flow cytometry was similar to fibrin and fibrin-chitosan hydrogels after 1 d. In this leukocyte population, the proportion of granulocytes increased beneath both hydrogels whereas the antigen-presenting cell, myeloid dendritic cells, T cells and B cells decreased. The natural killer (NK) cell population was significantly decreased only in DPs from teeth treated with fibrin-chitosan hydrogel. Immunolabeling analysis of the DP/hydrogel interface showed accumulation of neutrophil granulocytes in contact with both hydrogels 1 d after treatment. The DP close to this granulocyte area contained M2 but no M1 macrophages. These data collectively demonstrated that fibrin-chitosan hydrogels induced an inflammatory/immune response similar to that of the fibrin hydrogel. The results confirmed the potential clinical use of fibrin-chitosan hydrogel as a new scaffold for vital-pulp therapies.

Background and Objectives: To test the long-term ability of human ovarian cortex cells to develop in unconventional culture conditions. Materials and Methods. Ovarian cortex cells from fetuses aged 23 to 39 weeks gestation were cultured for 90 days in hollow chitosan hydrogel micro-bioreactors and concurrently in traditional wells. Various cell-type counts were considered. Results: With intact follicles as a denominator, the percentage of growing intact follicles at Day 0 varied widely between ovaries (0 to 31.7%). This percentage tended to increase or stay relatively constant in bioreactor as in control cultures; it tended more toward an increase over time in bioreactor vs. control cultures. Modeled percentages showed differences (though not significant) in favor of bioreactor cultures (16.12% difference at D50 but only 0.12% difference at D90). With all follicles present as a denominator, the percentage of growing primary and secondary follicles at D0 varied widely between ovaries (0 to 29.3%). This percentage tended to increase over time in bioreactor cultures but to decrease in control cultures. Modeled percentages showed significant differences in favor of bioreactor cultures (8.9% difference at D50 and 11.1% difference at D90). At D50 and D90, there were only few and sparse apoptotic cells in bioreactor cultures vs. no apoptotic cells in control cultures. Conclusions: Over three months, bioreactor folliculogenesis outperformed slightly traditional culture. This is an interesting perspective for follicle preservation and long-term toxicological studies.

Vectorization of microRNAs has shown to be a smart approach for their potential delivery to treat many diseases (i.e., cancer, osteopathy, vascular, and infectious diseases). However, there are barriers to genetic in vivo delivery regarding stability, targeting, specificity, and internalization. Polymeric nanoparticles can be very promising candidates to overcome these challenges. One of the most suitable polymers for this purpose is chitosan. Chitosan (CS), a biodegradable biocompatible natural polysaccharide, has always been of interest for drug and gene delivery. Being cationic, chitosan can easily form particles with anionic polymers to encapsulate microRNA or even complex readily forming polyplexes. However, fine tuning of chitosan characteristics is necessary for a successful formulation. In this review, we cover all chitosan miRNA formulations investigated in the last 10 years, to the best of our knowledge, so that we can distinguish their differences in terms of materials, formulation processes, and intended applications. The factors that make some optimized systems superior to their predecessors are also discussed to reach the highest potential of chitosan microRNA nanocarriers.

The development of non-cellularized composites of chitosan (CHI) hydrogels, filled with cellulose nanofibers (CNFs) of the type nanofibrillated cellulose, was proposed for the repair and regeneration of the intervertebral disc (IVD) annulus fibrosus (AF) tissue. With the achievement of CNF-filled CHI hydrogels, biomaterial-based implants were designed to restore damaged/degenerated discs. The structural, mechanical and biological properties of the developed hydrogel composites were investigated. The neutralization of weakly acidic aqueous CNF/CHI viscous suspensions in NaOH yielded composites of physical hydrogels in which the cellulose nanofibers reinforced the CHI matrix, as investigated by means of microtensile testing under controlled humidity. We assessed the suitability of the achieved biomaterials for intervertebral disc tissue engineering in ex vivo experiments using spine pig models. Cellulose nanofiber-filled chitosan hydrogels can be used as implants in AF tissue defects to restore IVD biomechanics and constitute contention patches against disc nucleus protrusion while serving as support for IVD regeneration.