Search

Polymer electrolyte membrane fuel cells require cheap and active electrocatalysts to drive the oxygen reduction reaction. Nitrogen-doped carbons have been extensively studied regarding their oxygen reduction reaction. The work at hand looks beyond the nitrogen chemistry and brings to light the role of oxygen. Nitrogen-doped nanocarbons were obtained by a radio-frequency plasma route at 0, 100, 250, and 350 W. The lateral size of the graphitic domain, determined from Raman spectroscopy, showed that the nitrogen plasma treatment decreased the crystallite size. Synchrotron radiation photoelectron spectroscopy showed a similar nitrogen chemistry, albeit the nitrogen concentration increased with the plasma power. Lateral crystallite size and several nitrogen moieties were plotted against the onset potential determined from oxygen reduction reaction curves. There was no correlation between the electrochemical activity and the sample structure, as determine from Raman and synchrotron radiation photoelectron spectroscopy. Near-edge X-ray absorption fine structure (NEXAFS) was performed to unravel the carbon and nitrogen local structure. A difference analysis of the NEXAFS spectra showed that the oxygen surrounding the pyridinic nitrogen was critical in achieving high onset potentials. The work shows that there were more factors at play, other than carbon organization and nitrogen chemistry.

A hydrodynamic cavitation method was used to maximize the effect of destructuration of a honeycomb monolithic support of a spent Selective Catalyst Reduction (SCR) catalyst&mdash, V2O5-WO3/TiO2-type&mdash, for extracting crystalline titanium and tungsten oxides from the cordierite surface. A high relative inlet pressure of 40 MPa was applied to a divergent nozzle for obtaining high shear stresses of the submerged cavitating jets and intensive micro- and nano-jets and shock waves acting on the particle surface of the milled catalyst. Scanning Electron Microscopy (SEM) analysis indicated the compact morphology of the thin metal oxide layer at the surface of the cordierite support and the high content of Ti and W elements in the sample. Energy dispersive spectroscopy (EDAX) performed along with TEM investigations on different nano-zones from the sample established the elemental composition of WO3-TiO2 agglomerates separated after hydrodynamic cavitation processing and identified as independent nanocrystalline structures through Bright Field Transmission Electron Microscopy (BF-TEM) and High Resolution Transmission Electron Microscopy (HR-TEM) measurements. The tetragonal anatase phase of TiO2 and cubic phase of WO3 were established by both interplanar d spacing measurements and X-ray diffraction analysis. The photoelectrochemical results showed the possible second life application of automotive catalysts.

Platinum group metals (PGMs: Pt, Pd, and Rh) are used extensively by the industry, while the natural resources are limited. The PGM concentration in spent catalytic converters is 100 times larger than in natural occurring ores. Traditional PGM methods use high temperature furnaces and strong oxidants, thus polluting the environment. Electrochemical studies showed that platinum can be converted to their chloride form. The amount of dissolved PGM was monitored by inductively coupled plasma-optical emission spectroscopy and the structure was identified by ultraviolet-visible spectroscopy. An electrochemistry protocol was designed to maximize platinum dissolution, which was then used for a spent catalytic converter. A key finding is the use of potential step that enhances the dissolution rate by a factor of 4. Recycling rates as high as 50% were achieved in 24 h without any pretreatment of the catalyst. The method developed herein is part of a current need to make the PGM recycling process more sustainable.

Modification of carbon materials via incorporation of nitrogen has received much attention in recent years due to their performance as electrodes in applications ranging from electroanalysis to electrocatalysis for energy storage technologies. In this work we synthesized nitrogen-incorporated amorphous carbon thin film electrodes (a-C:N) with different degrees of nitrogenation via magnetron sputtering. Electrodes were characterized using a combination of spectroscopic and electrochemical methods, including X-ray photoelectron spectroscopy, ellipsometry, voltammetry, and impedance spectroscopy. Results indicate that low levels of nitrogenation yield carbon materials with narrow optical gaps and semimetallic character. These materials displayed fast electron-transfer kinetics to hexammine ruthenium(II)/(III), an outer-sphere redox couple that is sensitive to electronic properties near the Fermi level in the electrode material. Increasing levels of nitrogenation first decrease the metallic character of the e...

Carbon materials are widely used in a range of applications from biomaterials to sensing and electronics. Many of these applications rely on the ability to control carbon/water interfacial properties, in particular, surface charge density. This work reports a study of the electrokinetic properties of amorphous carbon thin films as a function of pH and surface chemistry. Surface ζ-potential (SZP) and isoelectric point were determined using the tracer particle method. Initially, the use of sulfonated and amine-terminated latex bead suspensions as tracer particles for the determination of SZP of reference polymer surfaces was validated. The tracer particle method was then applied to the determination of SZP and isoelectric point of macroscopic carbon surfaces with different surface chemistry. Highly graphitic and sp3-rich hydrogenated carbon surfaces were found to display negative SZP, as expected for hydrophobic surfaces. The isoelectric point of the most highly graphitic surface was found to be pHiso = 3.7. Surface oxidation of these films resulted in a decrease of SZP at all pH values and in a downshift of pHiso to values lower than 1.5, consistently with the presence of surface acidic groups arising from oxidation. Results indicate that the specific choice of acid/base chemistry for the tracer particles does not significantly affect either SZP or pHiso determinations. These results show that the tracer particle method in combination with widely available latex beads as tracers can be applied for the determination of carbon SZP as a function of pH. Copyright © 2017 John Wiley & Sons, Ltd.

Porous manganese carbonate was obtained via solvothermal synthesis using ethanol and urea. The manganese carbonate was subsequently used as a precursor to synthesise mesoporous manganese oxides via thermal treatments at three various temperatures. X-ray diffraction and Extended X-ray Absorption Fine Structure (EXAFS) results shows that γ-MnO2 is synthesised at 380 and 450 °C while Mn2O3 is produced at the annealing temperature of 575 °C. X-ray absorption spectra show that γ-MnO2 converts completely to Mn2O3 after annealing over the 450–575 °C range. The oxides obtained at 380 °C and 450 °C possess extremely high specific surface area, which is of interest for catalytic applications. The oxides were investigated as electrocatalysts for the oxygen evolution reaction; the oxide prepared at the lowest annealing temperature was found to be the optimum catalyst with an overpotential of 427 ± 10 mV at a current density of 10 mA cm−2, normalised by the geometric area. The improved catalytic activity was related to the presence of defect-rich and highly porous manganese dioxide at the lowest annealing temperature.

Oxygen electrochemistry is at the core of several emerging energy conversion technologies. The role of carbon nanostructures in the electrocatalysis of the oxygen reduction reaction is not well understood. Herein we report an investigation of the role of graphitic edges in oxygen electrochemistry. A new synthetic method was used to create all-carbon model electrode materials with controlled morphology. Electron microscopy results show that synthesized materials possess a high density of graphitic edges. Electrochemical intercalation experiments, however, indicate that the density of electroactive edges does not correlate positively with microscopy results. The materials were then characterized as electrodes for the oxygen reduction reaction in alkaline media. Results suggest that electrochemical determinations of edge and defect density more accurately predict electrocatalytic activity, thus suggesting that in situ characterization techniques are needed to understand the carbon/electrolyte interface.

Nitrogen incorporated carbon materials play an important role in electrochemical energy conversion technologies from fuel cells to capacitive storage devices. This work investigates the effects of nitrogen incorporation on capacitance, work function and semiconductor properties of amorphous carbon thin film electrodes. Nitrogenated electrodes (a-C:N) electrodes were synthesized via magnetron sputtering and characterized using X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy (UPS), Raman spectroscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). EIS was carried in both aqueous (0.1 M KCl) and organic (0.1 M TBAPF6/acetonitrile) electrolytes to discriminate between pseudocapacitive contributions and changes to semiconductor properties of the materials arising from structural and chemical disruption of the graphitic carbon scaffold. Raman and UPS spectroscopy both suggest that nitrogen incorporation increases the metallic character of the disordered carbon matrix at low-intermediate concentrations, whereas further nitrogen incorporation results in significantly more defective carbon with small graphitic cluster size. EIS studies in 0.1 M KCl indicate that the capacitance of a-C:N electrodes increases relative to nitrogen-free a-C electrodes due to a combination of microroughness and pseudocapacitive contributions in parallel to those of the double layer capacitance. Results in 0.1 M TBAPF6 in acetonitrile which are dominated by the interfacial capacitance, show that initial nitrogen incorporation into the disordered carbon scaffold compensates for p-type properties in the disordered carbon matrix, resulting in an increase in metallic character. Greater levels of nitrogenation, are instead disruptive and increase defect density while decreasing the double layer capacitance.

In the presented work, the electrochemical stability of platinized silicon carbide is studied. Postmortem transmission electron microscopy and X-ray photoelectron spectroscopy were used to document the change in the morphology and structure upon potential cycling of Pt/SiC catalysts. Two different potential cycle aging tests were used in order to accelerate the support corrosion, simulating start-up/shutdown and load cycling. On the basis of the results, we draw two main conclusions. First, platinized silicon carbide exhibits improved electrochemical stability over platinized active carbons. Second, silicon carbide undergoes at least mild oxidation if not even silicon leaching.

A non-covalent functionalization for multi-walled carbon nanotubes has been used as an alternative to the damaging acid treatment. Platinum nanoparticles with similar particle size distribution have been deposited on the surface modified multi-walled carbon nanotubes. The interaction between platinum nanoparticles and multi-walled carbon nanotubes functionalized with 1-pyrenecarboxylic acid is studied and its electrochemical stability investigated. This study reveals the existence of a platinum-support interaction and leads to three main conclusions. First, the addition of 1-pyrenecarboxylic acid is improving the dispersion of platinum nanoparticles, leading to an improved electrochemical activity towards oxygen reduction reaction. Second, the investigations regarding the electrochemical stability showed that the platinum-support interaction plays an important role in improving the long-term stability by as much as 20%. Third, post-mortem microscopy analysis showed a surprising effect. During the electrochemical stability investigations concerned with carbon corrosion it was found that the multi-walled carbon nanotubes were undergoing severe structural change, transforming finally into carbon spheres.

Commercially available graphitized carbon nanofibers and multi-walled carbon nanotubes, two carbon materials with very different structure, have been functionalized in a nitric–sulfuric acid mixture. Further on, the materials have been platinized by a microwave assisted polyol method. The relative degree of graphitization has been estimated by means of Raman spectroscopy and X-ray diffraction while the relative concentration of oxygen containing groups has been estimated by X-ray photoelectron spectroscopy, which resulted in a graphitic character trend: Pt/GNF > Pt/F-GNF ⋙ Pt/MWCNT > Pt/F-MWCNT. Transmission electron microscopy showed that the Pt particle size is around 3 nm for all samples, which was similar to the crystallite size obtained by X-ray diffraction. The activity towards electrochemical reduction of oxygen has been quantified using the thin-film rotating disk electrode, which has shown that all the samples have a better activity than the commercially available electrocatalysts. The trend obtained for the graphitic character maintained for the electrochemical activity, while the reverse trend has been obtained for the accelerated ageing test. Long-term potential cycling has demonstrated that the functionalization improves the stability for multi-walled carbon nanotubes, at the cost of decreased activity.

Electrochemical dissolution of platinum has been proposed by several research groups as an environmentally friendly way to recover platinum from catalytic structures such as fuel cell electrodes. For the case of electrochemical dissolution of platinum in hydrochloric acid electrolyte, the present communication reports a simple chemical method for reprecipitating platinum as nanoparticles of reasonable particle size on a carbon substrate without intermediary separation and handling of solid platinum salt. After electrochemical dissolution, platinum was reprecipitated using a polyol based method. Platinum on carbon was then identified, quantified, and the particle size evaluated by powder X-ray diffraction, thermogravimetric analysis and cyclic voltammetry. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Research with proton exchange membrane fuel cells has demonstrated their potential as important providers of clean energy. The commercialization of this type of fuel cell needs a breakthrough in the electrocatalyst technology to reduce the relatively large amount of noble metal platinum used with the present carbon based substrates. We have recently examined suitably sized silicon carbide (SiC) particles as catalyst supports for fuel cells based on the stable chemical and mechanical properties of this material. In the present study, we have continued our work with studies of the oxygen reduction and methanol oxidation reactions of SiC supported catalysts and measured them against commercially available carbon based catalysts. The deconvolution of the hydrogen desorption signals in CV cycles shows a higher contribution of Pt (110) and Pt (111) peaks compared to Pt (100) for SiC based supports than for carbon based commercial catalysts, when HClO 4 is used as an electrolyte. The Pt (110) and Pt (111) facets are shown to have higher electrochemical activities than Pt (100) facets. To the best of our knowledge, methanol oxidation studies and the comparison of peak deconvolutions of the H desorption region in CV cyclic studies are reported here for the first time for SiC based catalysts. The reaction kinetics for the oxygen reduction and for methanol oxidation with Pt/SiC are observed to be similar to the carbon based catalysts. The SiC based catalyst shows a higher specific surface activity than BASF (Pt/C) for methanol oxidation and oxygen reduction while the mass activity values are comparable.