Search

It has been suggested that the coronavirus disease 2019 (COVID-19) pandemic has had a negative impact on glycemic control in patients with type 2 diabetes mellitus (T2DM). However, no study has examined yearly trends in glycated hemoglobin (HbA1c) levels after the start of the COVID-19 outbreak. Here, we performed a retrospective analysis of HbA1c concentrations during the early period of the COVID-19 outbreak (COVID-19 cohort) and then compared the yearly trend in the mean HbA1c level, along with fluctuations in HbA1c levels, with those during previous years (non-COVID-19 cohorts). We observed that the mean HbA1c level in patients with T2DM increased during the first 6 months of the COVID-19 outbreak. After 6 months, HbA1c levels in the COVID-19 cohort returned to levels seen in the non-COVID-19 cohorts. The data suggest that vulnerable patients with T2DM should be monitored closely during the early period of a pandemic to ensure they receive appropriate care.

In this study, we focused on the manufacturing of void-free composites of electrospun nylon 6 nanofibers as reinforcement for the poly(vinyl alcohol) (PVA) matrix. PVA solution was introduced into ...

Purpose To develop consensus terminology in the setting of polypoidal choroidal vasculopathy (PCV), and to develop and validate a set of diagnostic criteria not requiring indocyanine green angiograph (ICGA) for differentiating PCV from typical neovascular age-related macular degeneration (nAMD) based on a combination of OCT and color fundus photograph findings. Design Evaluation of diagnostic test Participants Panel of retina specialists. Methods As part of the Asia-Pacific Ocular Imaging Society (APOIS), an international group of experts surveyed and discussed the published literature regarding the current nomenclature and lesion components for PCV and proposed an updated consensus nomenclature, which reflects our latest understanding based on imaging and histology reports. The workgroup evaluated a set of diagnostic features based on OCT and color fundus photographs for PCV that may distinguish it from typical nAMD and assessed the performance of individual and combinations of these non-ICGA features, aiming to propose a new set of diagnostic criteria which does not require the use of ICGA. The final recommendation was validated in 80 eyes from 2 additional cohorts. Main Outcome Measures A consensus nomenclature system for PCV lesion components and non-ICGA-based criteria to differentiate PCV from typical nAMD. Results The workgroup recommended the terms ‘polypoidal lesion’ and ‘branching neovascular network’ for the two key lesion components in PCV. For the diagnosis of PCV, the combination of 3 OCT-based ‘major criteria’ (sub-RPE ring-like lesion, enface OCT complex RPE elevation, and sharp-peaked PED) achieved an area under the receiver operating characteristic curve of 0.90. Validation of this new scheme in a separate subset 110 eyes achieved an accuracy of 82%. Conclusions We propose updated terminology for PCV lesion components which better reflect the nature of these lesions which was based on international consensus. A set of practical diagnostic criteria that are easily applied to SD-OCT can be used for diagnosing PCV with high accuracy in clinical settings in which ICGA is not routinely performed.

The control of surface wettability through a combination of surface roughness, chemical composition, and structural modification has attracted significant attention for antifogging and antibacterial applications. Herein, a two-step spin-coating method for amphiphilic organic-inorganic hybrid materials with incorporated transition metal ions is presented. The coating solution was prepared via photochemical thiol-ene click reaction between the mercapto functional group in trimethylolpropane tris(3-mercaptopropionate) and the vinyl functionalized silica precursor 3-(trimethoxysilyl)propyl methacrylate. In the first step of coating, a glass substrate was coated using a solution of metal nitrate hydrates and subsequently showed hydrophobic properties. As the second step, the spin-coated glass substrate was further coated with silica nanoparticles (SiO2 NPs) and polycaprolactone triol (PCT) suspension, where the contents of SiO2 NPs were fixed at 0.1 wt %, unless otherwise noted. The coated substrate exhibited hydrophilic properties. For comparison, the coating was also formulated with the SiO2 NPs/PCT suspension without SiO2 NPs and with 0.5 wt % SiO2 NPs as well as by adjusting different coating layer thicknesses. The surface morphology and chemical compositions of the obtained coating materials were analyzed by field emission scanning electron microscopy with energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. The transparency and static contact angle of coated samples were measured by UV-visible spectrophotometry and drop shape analysis, respectively. It was concluded that our novel hybrid coating materials exhibited excellent antibacterial and antifogging properties with extremely high scratch resistance and transparency.

Background/AimsTo analyse the long-term anatomic and visual outcomes of patients with peripapillary pachychoroid syndrome (PPS), a recently described entity in the pachychoroid disease spectrum.MethodsThis study retrospectively included patients from several retina centres worldwide. Visual acuity (VA), retinal thickness and choroidal thickness at baseline, 6 months and final follow-up were assessed. Temporal trends in VA and anatomic characteristics were evaluated. Visual and anatomic outcomes in eyes that were observed versus those that were treated were analysed.ResultsFifty-six eyes of 35 patients were included with mean follow-up of 27±17 months. Median VA was 20/36 at baseline and remained stable through follow-up (p=0.77). Retinal thickness significantly decreased subfoveally (p=0.012), 1.5 mm nasal to the fovea (p=0.002) and 3.0 mm nasal to the fovea (p=0.0035) corresponding to areas of increased thickening at baseline. Choroidal thickness significantly decreased subfoveally (p=0.0030) and 1.5 mm nasal to the fovea (p=0.0030). Forty-three eyes were treated with modalities including antivascular endothelial growth factor injection, photodynamic therapy, and others. VA remained stable in treated eyes over follow-up (p=0.67). An isolated peripapillary fluid pocket in the outer nuclear layer was characteristic of PPS.ConclusionPatients with PPS experienced decreased retinal oedema and decreased choroidal thickening throughout the course of disease. While some patients experienced visual decline, the overall visual outcome was relatively favourable and independent of trends in retinal or choroidal thickening.

A series of novel structured latex particles with semi-interpenetrating polymer network (IPN) of glassy styrene-acrylonitrile copolymer (SAN) cores and rubbery polyurethane (PU) shells were synthes...

Since a production line for 3D printing is easier to change a product model than that for traditional manufacturing one, 3D printing technology is developing and growing faster than most other tech...

In this study, we synthesized non-isocyanate poly(hydroxyurethane)s (NI-PHUs) via the polyaddition of bis(cyclic carbonate)s and diamines. Bis(cyclic carbonate)s were prepared by reacting resorcino...

Recently, conventional solvent-typed polyurethanes are subject to many regulations due to emission of organic volatile compounds(VOCs) and researches have been focused on eco-friendly waterborne po...

The degradability of degradable polymers is the most important property to determine the lifetime of commercial applications. To control degradation rate and thermal properties, enantiomeric block ...

Although a photo curing is more efficient in terms of time, solvent, and cost than a thermal one, photo-curable coatings require low viscosity and fast curing speed due to workability and time savi...

Over the past few years, silicone-based polymers have been widely studied because silicone shows unique surface properties, such as hydrophobicity, film formability, etc and then silicone-based com...

Introduction There are only a few studies on the clinical utility of filler injections for penile augmentation (PA) in patients with small penis syndrome (SPS), which is a type of anxiety or body dysmorphic disorder, not a true micropenis. Aim To compare the clinical outcomes of hyaluronic acid (HA) with polylactic acid (PLA) filler injection for temporary PA in patients with SPS. Methods Our prospective, patient/evaluator-blind, comparative, randomized, non-inferiority trial consisted of a single filler injection and a 24-week post-injection period. Seventy-four men with SPS were included between November 2017 and February 2018. Patients were divided into those injected with HA (n = 39) and those injected with PLA filler (n = 35). Main Outcome Measure The psychological effects of PA, based on the Beliefs about Penis Size Scale, penile girth, and satisfaction, were assessed at baseline and at 4, 12, and 24 weeks post-injection. Results At 24 weeks, the mean penile girth increases were 2.1 ± 1.0 cm (P < .001) in the HA group and 1.6 ± 0.9 cm (P < .001) in the PLA group, with a mean difference of 0.5 ± 0.2 cm between groups (P = .031). In both groups, satisfaction levels significantly increased at 24 weeks, with 1.8 ± 1.7 and 1.6 ± 1.4 mean increases in the visual analog scale for penile appearance satisfaction in the HA and PLA groups, respectively (each P < .001), and 1.0 ± 1.1 and 0.7 ± 1.2 mean increases in the visual analog scale for sexual life satisfaction in the HA and PLA groups, respectively (each P < .001), with no significant differences between groups (P = .950 and P = .287). The mean Beliefs about Penis Size Scale scores significantly decreased at 24 weeks, with 7.8 ± 8.3 and 5.3 ± 7.2 mean decreases in the HA and PLA groups, respectively (each P < .001), and no significant difference between the groups (P = .920). There were no serious adverse events, but filler injection-related adverse events in the HA and the PLA groups were reported in 2 cases (5.13%) and 5 cases (14.29%), respectively (P = .245). Clinical Implications Our study provides an overview of clinical course after HA and PLA filler injections for PA and suggests that filler injections can be considered an alternative approach in patients with SPS. Strengths & Limitations Our study is the first to assess the psychological symptoms in patients with SPS who received the filler injection for PA; however, the follow-up duration was insufficient to prove the long-term outcomes of fillers. Conclusion Without serious adverse events, HA and PLA filler injections for PA significantly resulted in not only an augmentative effect but also improvement of psychological distress, and the clinical utility was comparable between the fillers.

Since most of the coatings have been prepared by organic solvents, there are many regulations because of the environmental and health hazards caused by volatile organic compounds. As an alt...

To develop carbon dioxide-reducible polymeric materials, triblock copolymers (PLA-polyester-PLA) of enantiomeric lactides and biopolyester diol, were synthesized by the ring-opening polymer...

Polyurethane is one of the most versatile polymeric materials and is found just about everywhere in modern life including coatings and adhesives in electronics and automobile interior. Howe...

In order to develop ultraviolet (UV)-curable coatings applicable to pre-coated metal (PCM), organic-inorganic hybrid UV curable polyurethane (PU)-acrylates were prepared using cage type met...

Polyaspartic coating is well known as one of popular eco-friendly coatings because of non VOC and excellent mechanical properties such as fast curing, abrasion resistance, chemical resistan...

Typical light stabilizers absorb and block UV rays in the wavelength range of 300-380 nm region. This range overlaps with the UV region, necessary to cure UV-curable coating. By overlapping...

The value of the critical surface tension(γc.0) of the polyolefin part calculated by Zismann plot was 26.1 dyne/cm. The surface state and the γc,0 of the polyolefin part were changed by sol...

PurposeTo compare the efficacy and safety of brolucizumab versus aflibercept in eyes with polypoidal choroidal vasculopathy (PCV) over 96 weeks in the HAWK study.DesignHAWK was a global, 2-year, randomised, double-masked, multicentre phase III trial in participants with neovascular age-related macular degeneration.MethodsOf the Japanese participants with PCV, 39 received brolucizumab 6 mg and 30 received aflibercept 2 mg. After 3 monthly loading doses, brolucizumab-treated eyes received an injection every 12 weeks (q12w) but were adjusted to q8w if disease activity was detected. Aflibercept-treated eyes received fixed q8w dosing. Mean change in best-corrected visual acuity (BCVA), the proportion of participants on q12w, retinal thickness, retinal fluid changes and safety were assessed to Week 96.ResultsMean change in BCVA (early treatment diabetic retinopathy study (ETDRS) letters) from baseline to week 48/week 96 was+10.4/+11.4 for brolucizumab and +11.6/+11.1 for aflibercept. For brolucizumab-treated eyes, the probability of only q12w dosing after loading through week 48 was 76%, and 68% through week 96. Fluid resolution was greater with brolucizumab than aflibercept: respective proportions of eyes with intraretinal fluid and/or subretinal fluid were 7.7% and 30% at week 48% and 12.8% and 16.7% at week 96. Brolucizumab exhibited an overall well-tolerated safety profile despite a higher rate of intraocular inflammation compared with aflibercept.ConclusionIn Japanese eyes with PCV, brolucizumab q12w/q8w monotherapy resulted in robust and consistent BCVA gains that were comparable to q8w aflibercept dosing. Anatomical outcomes favoured brolucizumab over aflibercept, with 76% of brolucizumab participants maintained on q12w dosing after loading to week 48.

PurposeTo develop and validate OCT and color fundus photography (CFP) criteria in differentiating polypoidal choroidal vasculopathy (PCV) from typical neovascular age-related macular degeneration (nAMD) in eyes with suboptimal response to anti–vascular endothelial growth factor (VEGF) monotherapy and to determine whether OCT alone can be used to guide photodynamic therapy (PDT) treatment.DesignClinical study evaluating diagnostic accuracy.ParticipantsPatients with nAMD who received 3-month anti-VEGF monotherapy but had persistent activity defined as subretinal fluid or intraretinal fluid at month 3 assessments.MethodsIn phase 1, international retina experts evaluated OCT and CFP of eyes with nAMD to identify the presence or absence of features due to PCV. The performance of individual and combinations of these features were compared with ICGA. In phase 2, these criteria were applied to an independent image set to assess generalizability. In a separate exercise, retinal experts drew proposed PDT treatment spots using only OCT and near-infrared (NIR) images in eyes with PCV and persistent activity. The location and size of proposed spot were compared with ICGA to determine the extent of coverage of polypoidal lesions (PLs) and branching neovascular network (BNN).Main Outcome MeasuresSensitivity and specificity of CFP and OCT criteria to differentiate PCV from nAMD and accuracy of coverage of OCT-guided PDT compared with ICGA.ResultsIn eyes with persistent activity, the combination of 3 non–ICGA-based criteria (sharp-peaked pigment epithelial detachment [PED], subretinal pigment epithelium [RPE] ring-like lesion, and orange nodule) to detect PCV showed good agreement compared with ICGA, with an area under the receiver operating characteristic curve of 0.85. Validation using both an independent image set and assessors achieved an accuracy of 0.77. Compared with ICGA, the OCT-guided PDT treatment spot covered 100% of PL and 90% of the BNN.ConclusionsIn nAMD eyes with persistent activity, OCT and CFP can differentiate PCV from typical nAMD, which may allow the option of adjunct PDT treatment. Furthermore, OCT alone can be used to plan adjunct PDT treatment without the need for ICGA, with consistent and complete coverage of PL.

PurposeTo evaluate the various patterns of subretinal fluid (SRF) in eyes with age-related macular degeneration (AMD) in the absence of macular neovascularisation (MNV) and to assess the long-term outcomes in these eyes.MethodsThis retrospective study included only eyes with non-neovascular AMD and associated SRF. Eyes with evidence of MNV were excluded. Spectral-domain optical coherence tomography (SD-OCT) was obtained at baseline and at follow-up, and qualitative and quantitative SD-OCT analysis of macular drusen including drusenoid pigment epithelial detachment (PED) and associated SRF was performed to determine anatomic outcomes.ResultsForty-five eyes (45 patients) were included in this analysis. Mean duration of follow-up was 49.7±36.7 months. SRF exhibited three different morphologies: crest of fluid over the apex of the drusenoid PED, pocket of fluid at the angle of a large druse or in the crypt of confluent drusen or drape of low-lying fluid over confluent drusen. Twenty-seven (60%) of the 45 eyes with fluid displayed collapse of the associated druse or drusenoid PED and 24 (53%) of the 45 eyes developed evidence of complete or incomplete retinal pigment epithelial and outer retinal atrophy.ConclusionNon-neovascular AMD with SRF is an important clinical entity to recognise to avoid unnecessary anti-vascular endothelial growth factor therapy. Clinicians should be aware that SRF can be associated with drusen or drusenoid PED in the absence of MNV and may be the result of retinal pigment epithelial (RPE) decompensation and RPE pump failure.

Nitrogen-doped magnetic mesoporous hollow carbon (NMMHC) was prepared to realize effective adsorption of phenol from wastewater. The chemical and physical properties of NMMHC were analyzed, and the effects of adsorption time, initial pH, and phenol concentration on the adsorption capacity of NMMHC were studied. Adsorption kinetics and isotherm models were used to explain the adsorption properties. The results showed that the specific surface area, type of nitrogen group, and nitrogen content of NMMHC are related to the carbonization temperature. Chemical interaction was demonstrated to be present in the process of adsorption, which was characterized as monolayer adsorption. In addition, the adsorption mechanism was studied by attenuated total internal reflectance Fourier transform infrared spectroscopy and analysis of non-covalent interactions. This study found that non-covalent interactions between NMMHC and phenol molecules are van der Waals interactions, and nitrogen-containing groups increase the phenol adsorption capacity by enhancing such interactions. The π-π interactions between the nitrogen groups and phenol molecules also enhanced the adsorption energy.

Central serous chorioretinopathy (CSC) is a chorioretinal disorder characterized by serous detachment of the neurosensory retina, associated with serous retinal pigment epithelial (RPE) detachment, angiographic leakage at the level of the RPE, and choriodal hyperpermeability (Nicholson et al. 2013). It is usually idiopathic but might also be secondary to high levels of endogenous or exogenous corticosteroids. CSC typically affects young to middle-aged men, and the lesion is usually located at the posterior pole (Kitzmann et al. 2008). CSC can be classified according to its clinical course: acute or chronic (persisting for more than 3–6 months). Acute CSC usually resolves spontaneously within 2–3 months with good visual prognosis. However, some patients in chronic CSC may suffer from persistent or recurrent serous macular detachment with subsequent progressive visual loss (Gilbert et al. 1984).

A new type of UV-curable organic–inorganic hybrid oligomer was synthesized from vinyltrimethoxysilane (VTMS), tetraethylorthosilicate, and colloidal silica (CS) using a sol–gel method. UV-curable hybrid hard coating formulations were then prepared by mixing the organic–inorganic hybrid oligomer and acrylic monomers, trimethylolpropane triacrylate and tetrahydrofurfuryl acrylate, with a levelling agent and a photoinitiator. The oligomer was hydrolyzed and condensed from alkoxysilane and CS to obtain the UV-cured hybrid films. The hybrid oligomer and resulting hybrid films were characterized by Fourier transform infrared spectroscopy, 29Si nuclear magnetic resonance spectroscopy, scanning electron microscopy, and ultraviolet–visible spectrophotometry to confirm the chemical functionality, oxo-silicon signal, cross-sectional morphology, and transparency, respectively. When the concentration of the CS/VTMS mixture in the organic–inorganic hybrid oligomer was 0.50 mol, remarkable pencil hardness (up to 5H) with excellent transparency was observed. The hardness and transparency of the UV-cured hybrid coating films were improved significantly by increasing the CS content in the organic–inorganic hybrid oligomer.

The aim of the present study was to evaluate the efficacy of the inverted internal limiting membrane (ILM) flap technique that involved the use of a perfluorocarbon liquid (PFCL) bubble for the selective prevention of indocyanine green (ICG) staining of the parts of the inverted flap in contact with the retinal pigment epithelium for large macular hole (MH) closure.This retrospective, interventional, comparative study included 26 patients with idiopathic large MHs (minimum diameter, 400 µm) who underwent vitrectomy using the inverted ILM flap technique with conventional ILM staining with ICG (n = 14, Group 1) or PFCL-mediated selective ILM staining with ICG (n = 12, Group 2). The hole closure rate, best-corrected visual acuity (BCVA), and optical coherence tomography findings were analyzed at baseline and 1, 3, and 6 months after surgery in both groups.Hole closure was achieved in all the eyes. BCVA significantly improved after surgery in both groups (p 0.001 for both groups), although Group 2 exhibited significantly better values at 3 and 6 months after surgery (p = 0.008 and 0.001 at 3 and 6 months, respectively). The sizes of ellipsoid zone defect significantly decreased after surgery in both groups (p 0.001 relative to the baseline width in both groups), and it was significantly smaller in Group 2 than in Group 1 at 3 (p = 0.006) and 6 (p = 0.001) months after surgery.The findings of this study suggest that recovery of the photoreceptor layers and, consequently, the postoperative VA are better with the inverted ILM flap technique employing PFCL-mediated selective ILM staining with ICG than with the technique employing conventional ILM staining with ICG methods for patients with large MHs.

BACKGROUND AND OBJECTIVE: To evaluate the retinal morphologic characteristics of patients with macropsia caused by epiretinal membrane (ERM) based on spectral-domain optical coherence tomography (SD-OCT). PATIENTS AND METHODS: A cross-sectional, non-interventional study was performed to compare the characteristics of retinal structures in eyes with ERM according to the presence or absence of macropsia. Twenty-six patients with ERM and macropsia were defined as the macropsia group and 26 age-matched patients with ERM without macropsia were the control group. All participants underwent a full ophthalmologic examination and SD-OCT examination. Macropsia was diagnosed and quantified using a double dot chart. The thickness of retinal layers, including the outer nuclear layer (ONL) and inner segment / outer segment / retinal pigment epithelium (IS/OS/RPE) at the central fovea, were measured by electronic calipers of the SD-OCT system. The interocular ratio of each parameter was calculated for each patient and compared between the two groups. The integrity of the external limiting membrane (ELM), IS/OS junction, and cone outer segment tips (COST) line were evaluated. RESULTS: The thickness of the IS/OS/RPE differed significantly between both eyes in the macropsia group ( P < .001), whereas the control group was not significantly different ( P = .161). The ONL in the diseased eye was significantly thicker in the macropsia group than in the control group ( P = .020), whereas these two groups did not differ significantly in the thickness of ONL in the control eye ( P = .860). More patients had a disrupted COST line in the macropsia group ( P < .001 for macropsia group, P = .252 for control group). No eye showed disrupted ELM and IS/OS junction, regardless of the presence of macropsia. CONCLUSIONS: Eyes with macropsia showed thicker foveal ONL, IS/OS/RPE, and more frequently disrupted COST lines. This may indicate that the contractile strength of ERM can lead to centralization of photoreceptor cells. [ Ophthalmic Surg Lasers Imaging Retina . 2018;49:656–663.]

To develop environmentally friendly coating materials with good workability, a low-viscosity polyurethane acrylate (LPUA) was newly synthesized using cycloaliphatic isocyanate, 2-hydroxypropyl acrylate and caprolactone hydroxyl acrylate. Low-viscosity UV-curable dendritic polyurethane acrylate coatings (LPUA-DAs) were then prepared by adding different amounts of dendritic acrylates to LPUA. The viscosity of the resulting products, curing behavior, mechanical and thermal stability, hardness, and flexibility of the UV-cured films were examined. The mechanical properties and the glass transition temperature increased with increasing content of dendritic acrylates but the viscosity decreased. The optimal properties of the coating materials were observed when 10% of dendritic acrylate was used.

Deep eutectic solvents (DESs), a new type of cost-effective ionic liquid analogues, were employed to develop a novel and efficient method for direct functionalization of multiwalled carbon nanotubes (MWNTs) via Diels-Alder (DA) click reaction. Poly(ionic liquid)s featuring furfuryl moieties (P(F-ILs)) and butyl moieties (P(B-ILs)) were synthesized by the functionalization of poly(chloromethylstyrene-alt-maleic anhydride) with 1-methylimidazole and furfuryl amine or butylamine. Then, the polymer was directly grafted on the surface of untreated MWNTs in choline:ethylene glycol (ChCl:EG) based DES without any catalyst. The successful functionalization of the polymer on MWNTs was confirmed by Raman spectroscopy, TGA, and XPS analysis. It was shown that the reaction proceeded in a very rapid fashion (less than an hour) and the use of DESs significantly improved the grafting density (more than double) as compared with the reaction in water.

Polypoidal choroidal vasculopathy (PCV) is an age-related macular degeneration (AMD) subtype and is seen particularly in Asians. Previous studies have suggested disparity in response to intravitreal injections of anti–vascular endothelial growth factor (VEGF) agents between PCV and typical AMD, and thus, the preferred treatment for PCV has remained unclear. Recent research has provided novel insights into the pathogenesis of PCV, and imaging studies based on OCT suggest that PCV belongs to a spectrum of conditions characterized by pachychoroid, in which disturbance in the choroidal circulation seems to be central to its pathogenesis. Advances in imaging, including enhanced depth imaging, swept-source OCT, en face OCT, and OCT angiography, have facilitated the diagnosis of PCV. Importantly, 2 large, multicenter randomized clinical trials evaluating the safety and efficacy of anti-VEGF monotherapy and combination with photodynamic therapy (PDT) recently reported initial first-year outcomes, providing level I evidence to guide clinicians in choosing the most appropriate therapy for PCV. In this review, we summarize the latest updates in the epidemiologic features, pathogenesis, and advances in imaging and treatment trials, with a focus on the most recent key clinical trials. Finally, we propose current management guidelines and recommendations to help clinicians manage patients with PCV. Remaining gaps in current understanding of PCV, such as significance of polyp closure, high recurrence rate, and heterogeneity within PCV, are highlighted where further research is needed.

To develop a halogen-free polyurethane adhesive for thermoplastic nonpolar polyolefins, polyurethanes were synthesized by using polyester polyol, polyolefin polyol, 4,4′-dicyclohexylmethane diisocy...

A facile route for grafting poly(ionic liquid)s (PILs) on to the surface of multi-walled carbon nanotubes (MWNTs) was demonstrated via Diels-Alder (DA) “click” reaction. Firstly, block copolymers o...

Eco-friendly water-repellent UV-curable polyurethane acrylates (PUA) with fluorine groups were synthesized from H12MDI which is excellent yellowing resistance and water resistance, polycarbonate di...

The UV-curable coatings are emerging as new environmental friendly coating technology for replacement of solvent-based ones. UV-curable polyurethane acrylate oligomers were newly synthesized using ...

In this study, chloroprene rubber (CR) /silica nanocomposites prepared by dispersing nanosilica in CR was applied as a primer and its adhesion properties were examined. The structure of CR/silica n...

Herein, we propose a facile method for the synthesis of functionalised mesoporous silica nanoparticles (MSN) via the polymerisation of N-isopropylacrylamide (NIPAM) monomer with vinyl functional mesoporous silica nanoparticles (VMSN). The structural and functional properties of the materials are analysed using various characterisation techniques. Additionally, a transparent hydrophobic glass substrate is fabricated by dispersing a certain amount of the synthesised nanoparticles in ethyl acetate (EA) followed by spin-coating on a glass substrate and drying overnight at 80 °C. In summary, the functionalised mesoporous materials can be used for multiple applications such as the preparation of stable hydrophobic, transparent, and temperature-sensitive surfaces, as well as for the adsorption of Rhodamine B dye.

For an environmentally-friendly coating, waterborne UV-curable poly-urethane acrylates were synthesized with different mixing ratios of 4,4-methylene dicyclohexyl diisocyanate (H12MDI) and ...

Although polyurethane (PU)- and polysiloxane-based coating agents find wide applications in electronics and automotive industries (e.g., for sealing), their full potential can be realized only base...

Poly(lactic acid)(PLA)/lipophilized graphene oxide (LGO) nanohybrids were prepared using a solution blending method. Graphene oxide (GO) was synthesized using a modified Hummers method and then lipophilized by functionalization with alkylamines such as octylamine (OA), dodecylamine (DA), or octadecylamine (ODA). The PLA/GO (PG) nanohybrids were also prepared for comparison. Among the LGOs, ODA-GO was chosen to produce the PLA/LGO (PLG) nanohybrids because ODA-GO exhibited obvious intercalation behavior and the best dispersibility in chloroform. The properties of the PGs and PLGs were examined by scanning electron microscopy, wide-angle X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, universal testing machine, chemical resistance test, and hydrolytic degradable analysis. The hydrophobic ODA-GO (LGO) was dispersed on the nanoscale within the PLA matrix and the resulting nanohybrids showed significantly higher chemical resistance and reduced hydrolytic degradation.

To improve the mechanical and thermal properties of polyurethane, two prepolymers, polyurethane acrylate (PUA) and epoxy acrylate (EPA) which have acrylate-ended groups, were synthesized. The obtained prepolymers were homogeneously mixed with various compositions and cured by UV. After UV curing, the properties of PU/EP copolymers were investigated by using Fourier-transform infrared spectroscopy, universal testing machine, dynamic mechanical thermal analysis and thermogravimetric analysis. The thermal and tensile properties of PU/EP copolymers gradually increased with the amount of EP due to the intermolecular interaction whereas their elongation properties decreased. These results indicate that the copolymerization of PU with EP could control their mechanical properties.

We prepared novel hybrid materials by in situ self-hydroxylation and condensation of polymethylsiloxane (PMHS) with multi-walled carbon nanotubes (MWCNTs). The hybrid material showed superhydrophobic and non-stick properties, mesoporous structure, and liquid marble-like non-stick water droplet behavior. Moreover, we found that the in situ addition of MWCNTs to the PMHS would increase the thermal stability of the hybrid material. Thermal stability of the hybrid is enhanced by increasing the percentage of MWCNTs to the PMHS. The superhydrophobic hybrid powder covered non-stick water droplet showed anti-icing behavior for long time. The hybrids also showed oils sorption behavior and easy reusable property. The obtained results suggest that the thermally stable superhydrophobic hybrid mesoporous materials with anti-icing, oils sorption properties can be easily synthesized and used for various applications.

Purpose To investigate vascular endothelial growth factor (VEGF) level according to the clinical and imaging features, and to explore its relationship with the responsiveness to anti-VEGF treatment in eyes with polypoidal choroidal vasculopathy. Methods Aqueous samples were collected from 62 eyes of 62 patients with treatment-naive polypoidal choroidal vasculopathy. Vascular endothelial growth factor levels were measured using enzyme-linked immunosorbent assay. Baseline best-corrected visual acuity, central macular thickness, subfoveal choroidal thickness, greatest linear dimension of the lesion, and the presence of hemorrhage were included in the analysis. The effects of 3 monthly intravitreal ranibizumab injections on best-corrected visual acuity and central macular thickness were assessed. Results Baseline VEGF level was negatively correlated with subfoveal choroidal thickness (r = -0.33, P = 0.01). Other variables had no correlation with VEGF level. The mean change in central macular thickness after anti-VEGF treatment was -51 ± 64 μm, which is positively correlated with VEGF concentration (r = 0.30, P = 0.04) and negatively correlated with subfoveal choroidal thickness (r = -0.35, P = 0.02). Conclusion Vascular endothelial growth factor level demonstrated a negative correlation with baseline subfoveal choroidal thickness and was associated with response to anti-VEGF treatment. These findings suggest that VEGF has a variable contribution to the pathogenesis of polypoidal choroidal vasculopathy depending on choroid thickness.

Polylactic acid (PLA) fillers are widely used for cosmetic volume augmentation. But, no study has evaluated the use of PLA filler in penile augmentation (PA No. 4). We evaluated the efficacy and safety of a newly developed PLA filler for PA during a 18-month follow-up period. A total of 23 healthy adult men were prospectively enrolled between June and November 2012. Penile girth was measured at proximal-, mid- and distal-shaft at baseline, 3, 6, 12 and 18 months following injection. Subjects' satisfaction was assessed with visual analogue scale (VAS). Adverse events (AEs) were also reported. Mean injected volume was 20 ml. The circumference of proximal-, mid-, and distal-shaft increased by a mean of 2.2±0.2, 2.7±1.0 and 2.7±1.0 cm at 3 months, respectively (each P0.001). No significant differences were noted in girth circumference between 3 and 18 months post-injection (each P0.05). VAS score increased from 51.6±14.7 at baseline to 64.8±19.3 and 74.3±14.6 at 3 and 6 months, respectively (each P0.05). Six cases of mild, transient treatment-emergent AEs were reported in 5 subjects. Serious AEs were not reported. In conclusion, penile injection of a newly developed PLA filler led to significant penile augmentative effects for up to 18 months and was well tolerated without serious AEs.