Search

New complex compounds [Cd(μ-L1)2]n (I), [Cd(μ-L2)(μ-Cl)(μ-DMSO)]n (III), and [Cd2(μ-L2)(μ-Cl)3(μ-DMSO)DMSO/EtOH]n (IV) are synthesized by the reactions of 1-(4-methoxyphenyl)-1,4-dihydro-5H-tetrazole-5-thione (HL1) and 1-(2-methoxyphenyl)-1,4-dihydro-5H-tetrazole-5-thione (HL2) with cadmium chloride. The molecular and crystal structures of the complexes are determined by X-ray structure analysis (CIF files CCDC nos. 1993455 (I), 1869249 (III), and 1993497 (IV)). Complexes I, III, and IV have uniform polymeric structures. The О···Н, Cl···H, and C···S contacts are observed between 1D polymeric chains in the crystal cells of complexes I, III, and IV. Complexes III and IV contain DMSO molecules. Under other equivalent conditions, the reaction of HL1 or HL2 with cadmium chloride in ethanol affords complex I or II of different compositions. Complex II contains the chlorine atom as found by scanning electron microscopy, whereas no chlorine is observed in complex I according to the X-ray structure analysis data.

Three new organoselenium compounds are synthesized: N-phenyl-2-(2-thienylacetyl)hydrazinecarboselenoamide (I), 4-phenyl-5-(2-thienylmethyl)-2,4-dihydro-3H-1,2,4-triazole-3-selone (II), and 3,3'-di[4-phenyl-5-(2-thienylmethyl)-4H-1,2,4-triazolyl] diselenide (III). Two of them (compounds II and III) are characterized by X-ray diffraction analysis (CIF files CCDC nos. 1956602 (II) and 1956603 (III)). Compound II crystallizes in the monoclinic crystal system (space group P21/n) with two crystallographically independent molecules A and B being different conformers relative to rotation about the NTrz–CTrz–C(H2)–CTph bond, where Trz is triazole and Tph is thiophene (gauche-A (51.4(3)°) and cis-B (4.2(4)°)). In the crystal of compound II, molecules A and B form chains along the crystallographic axis a due to strong hydrogen bonds N–H···Se. Then the chains are bound into a three-dimensional framework via intermolecular nonvalent interactions Se···S (3.3857(11) A). Owing to the anomeric effect, diselenide III is characterized by the typical gauche conformation of the substituents at the Se–Se bond (torsion angle СSeSeС 83.5(4)°) stabilized by a weak intramolecular hydrogen bond С–H···π. In the crystal of compound III, the molecules form chains along the crystallographic acid b due to intermolecular noncovalent interactions Se···π(C–C) (3.404(6) and 3.458(12) A), Se···Se (3.8975(11) A), and S···N (3.250(5) A). Bactericidal and fungicidal activity of the synthesized compounds is studied.

In the crystal of the title compound, C7H5FN4S, the molecules are non-planar, with dihedral angle formed by least-squares planes of tetrazole and benzene rings of 59.94 (8) °. The crystal packing is formed by N—H...S hydrogen bonds, which link the molecules into centrosymmetric dimers with an R 2 2(8) ring motif, and by the offset face-to-face π–π stacking interactions between the benzene rings, which join the dimers into layers parallel to (100). The Hirshfeld surface analysis shows that the most important contributions to the surface contacts are from N...H/H...N (21.9%), S...H/H...S (21.1%), H...H (14.6%), F...H/H...F (11.8%) and C...H/H...C (9.5%) interactions.

The reaction of (–)-cytisine with 2-(chloroselanyl)pyridine-1-oxide afforded the corresponding selenenylamide. Its biological activity against Aspergillus oryzae micromycetes was revealed.

Compound 4-(2-methoxyphenyl)-5-(thiophen-2-ylmethyl)-2,4-dihydro-1H-1,2,4-triazole-3-thione (LН) and its complex with cadmium(II) C42.12H39.50N9O3.12S6Cl2Cd (I) are synthesized. Their molecular and crystal structures are determined by X-ray diffraction analysis (СIF files CCDC nos. 1835776 (LН) and 1547251 (I)). Free ligand LН is thione and in the crystal forms H-bonded centrosymmetric dimers by two hydrogen bonds N–H···S. Complex I has a distorted trigonal bipyramidal structure: the sulfur atoms lie in the base and the chlorine atoms occupy the axial positions. Compound LН manifests itself as a monodentate ligand (S) when forming complex I and retains the thione form. The molecule of complex I is stabilized due to strong intramolecular contacts N–H···Cl. The crystal packing of compounds LН and I is formed due to the intermolecular contacts C–H···π, H···S, H···O, and H···N.

Cadmium (C20H16Cd2N4O4Se4) (I) and nickel (C10H8N2NiO2Se2) (II) selenolates are synthesized by the exchange reactions of sodium 1-oxypyridyl-2-selenolate and cadmium(II) and nickel(II) chlorides. The molecular and crystal structures of the complexes are determined by X-ray structure analysis (CIF files CCDC nos. 1585246 (I) and 1585251 (II)). Complex I forms a centrosymmetric dimer in which the coordination polyhedron of the cadmium atom is a distorted trigonal bipyramid and the selenium atoms take the trans configuration. Complex II containing the solvate C2H5OH molecule has a square structure and is a monomer. Unlike complex I, in complex II the selenium atoms of the ligands take the cis configuration. The crystal packings in complexes I and II are formed by weak intermolecular hydrogen bonds C–H···O and C–H···Se.

1H-Pyridine-2-selenenyl dibromide, C5H5NSeBr2, 1, is a product of the bromination of bis(pyridin-2-yl) diselenide in methylene chloride recrystallization from methanol. Compound 1 is essentially zwitterionic: the negative charge resides on the SeBr2 moiety and the positive charge is delocalized over the pyridinium fragment. The C—Se distance of 1.927 (3) Å is typical of a single bond. The virtually linear Br—Se—Br moiety of 178.428 (15)° has symmetrical geometry, with Se—Br bonds of 2.5761 (4) and 2.5920 (4) Å, and is twisted by 63.79 (8)° relative to the pyridinium plane. The Se atom forms an intermolecular Se...Br contact of 3.4326 (4) Å, adopting a distorted square-planar coordination. In the crystal, molecules of 1 are linked by intermolecular N—H...Br and C—H...Br hydrogen bonds, as well as by non-covalent Se...Br interactions, into a three-dimensional framework. (3aSR,(9aRS)-2,3,3a,9a-Tetrahydro-1H-cyclopenta[4,5][1,3]selenazolo[3,2-a]pyridinium-9 bromide, C10H12NSe+·Br−, 2, is a product of the cycloaddition reaction of 1 with cyclopentene. Compound 2 is a salt containing a selenazolopyridinium cation and a bromide anion. Both five-membered rings of the cation adopt envelope conformations. The dihedral angle between the basal planes of these rings is 62.45 (11)°. The Se atom of the cation forms two additional non-covalent interactions with the bromide anions at distances of 3.2715 (4) and 3.5683 (3) Å, attaining a distorted square-planar coordination. In the crystal, the cations and anions of 2 form centrosymmetric dimers by non-covalent Se...Br interactions. The dimers are linked by weak C—H...Br hydrogen bonds into double layers parallel to (001).

The molecular and crystal structures of 1-(2-methoxyphenyl)-1,4-dihydro-5H-tetrazole-5-thione (L) and its complex with cadmium(II) (II) are studied by X-ray diffraction analysis (CIF files CCDC nos. 1567109 (L) and 1547252 (II)). Free ligand L is nonplanar thione. The dihedral angle between the tetrazole and benzene cycles is 85.21(7)°. These cycles form centrosymmetric dimers in the crystal by two hydrogen bonds N–H···S. The dimers contain the central planar eight-membered ring {S=C–N–H···S=C–N–H···}. Complex II has a chain structure of the composition [(C8H7N4OS)2Cd]n. The coordination mode of the Сd(II) atom is a distorted tetrahedron consisting of two nitrogen atoms and two sulfur atoms of four ligands L. The 1D chains contain the eight-membered rings {←S=C–N–Cd ← S=C–N–Cd} in the boat conformation. Weak intermolecular hydrogen bonds C–H···N are observed between the adjacent 1D chains along the c axis in the crystal.

The molecular and crystal structures of 1-(4-fluorophenyl)-1,4-dihydro-1H-tetrazole-5-thione (I) and its complex with cadmium(II) (II) are studied by single crystal XRD. Free ligand I is thione; it has a nonplanar structure (the torsion angle between the tetrazole and benzene rings is 54.99(7)°) and forms H-bonded centrosymmetric dimers via two N–H…S hydrogen bonds in the crystal. The dimers contain a central planar eight-membered {S=C–N–H…S=C–N–H…} ring. Complex II has a chain structure with the composition [(C7H4N4FS)2Cd]n. The environment of the Cd(II) atom consists of two nitrogen atoms and two sulfur atoms from four ligands I and represents a distorted tetrahedron. When complex II forms, ligand I converts into the thiol form. Infinite 1D chains contain eight-membered {←S=C–N–Cd←S=C–N–Cd} rings in a chair conformation. The chains in the crystal are arranged in layers parallel to the (101) plane due to secondary intermolecular F…F and π–π-stacking interactions.

A reaction of dimethyl bicyclo[2.2.2]oct-5-ene-endo-2,endo-3-dicarboxylate with 1,3-benzо- thiazole-2- and 3-methoxycarbonylpyridine-2-sulfenyl chlorides leads to two types of heterocyclization products, which are formed through the ring closure by the oxygen atom of the carbоmethoxy group and/or by the nitrogen atom of the hetaryl fragment of the sulfenylating agent. The product ratio is affected by the medium nature and structural features of sulfenyl chlorides.

The title compound 4-(3-methoxyphenyl)-3-(2-thienylmethyl)-4,5-dihydro-3H-1,2,4-triazole-3-selone 2 was synthesized by two-step procedure including condensation of 1-isoselenocyanato-3-methoxybenzene with 2-(2-thienyl)acetohydrazide to selenosemicarbazide 1 and its intramolecular cyclization. Oxidation of selone 2 by atmospheric oxygen or hydrogen peroxide furnished corresponding diselenide 3 or product of elimination of selenium 1,2,4-triazole 4. Alkylation of compound 2 by benzyl chloride leads to the formation of selenide 5. The synthesized compounds have been characterized by spectroscopic techniques and the structures of 3,4 and 5 were confirmed by X-ray diffraction techniques and the supramolecular contacts were analyzed by Hirshfeld surface analyses.

Novel S- and Se-containing terpenoids were prepared by reacting (+)-camphene with N-heterocyclic selenyland sulfenyl chlorides.

New menthane-type derivatives were prepared via hetarylsulfenyl-chlorination reactions of (+)-carvone with 2-benzothiazolyl-, 4,6-dimethyl-2-pyrimidyl-, and 3-methoxycarbonyl-2-pyridylsulfenyl chlorides and 2-pyridylselenyl chloride.

Bis(4,6-dimethylpyrimidin-2-yl) diselenide, a new representative of dihetaryl diselenides, was obtained by successively treating selenourea with hydrochloric acid, acetylacetone, potassium hydroxide, and the system iodine—potassium iodide. The unusual planar trans-conformation of this compound (X-ray diffraction data) is stabilized by intramolecular attractive nonvalent Se…N interactions (Se…N, 2.926(1) A) and stacking of the π-systems of the aromatic heterocycles (the centers of the pyrimidine rings are spaced apart at 3.365(2) A). The energy parameters of the factors that make the molecular structure flattened were estimated by quantum chemical DFT calculations.

A reaction of 2-chloro-4,6-dimethylpyrimidine with sodium ditelluride in DMF afforded bis(4,6-dimethylpyrimidin-2-yl) ditelluride, a new representative of dihetaryl ditellurides. An X-ray diffraction study revealed an unusual planar trans-conformation of this compound, which is stabilized by both intramolecular attractive non-valent Te...N interactions (3.082(2) A) and π-stacking of the aromatic heterocycles (the centers of the pyrimidine rings are disposed at 3.421(3) ). The energy parameters of the factors that make the molecular structure flattened were estimated by quantum chemical DFT calculations.

The interaction of norbornene with the di(2-pyridyl) ditelluride–antimony pentachloride system in methylene chloride proceeds with the formation of exo-9-telluro-3-azoniatetracyclo-[9.2.1.02.10.03,8]tetradeca-3(8),4,6-triene chloroantimonates(III), which are the products of polar cycloaddition of tellurium-containing electrophiles at the multiple bond. The structure of the heterocyclization products was established by X-ray structural analysis.

Sulfenylating reagents have been obtained by the action of sulfuryl chloride or antimony pentachloride on di(2-pyridyl) disulfide. Their interaction with alkenes proceeds as addition-cyclization with ring closure by the nitrogen atom of the pyridine fragment of the sulfur-containing electrophile with the formation of 2,3-dihydro[1,3]thiazolo[3,2-a]pyridinium derivatives.

The reaction of pyridine-2-selanyl chloride with alkenes and dienes gives 2,3-dihydro[1,3]selenazolo- [3,2-a]pyridinium derivatives as addition-cyclization products involving closure of the ring at the pyridine nitrogen atom of the selanylating electrophile.

Reaction of perfluoro-1-ethyl-2-methyl-1-propenyliminochloromethanesulfenyl chloride with 1-allyl-2-methoxybenzene in methylene chloride and nitromethane gives as the main products β-and β-chloro sulfides plus derivative of 2,3-dihydrobenzofuran. The reaction in nitromethane in the presence of lithium perchlorate gave a product of addition of sulfur-containing electrophiles to the double bond-a derivative of 1,3-thiazolidin-2-one-in preference to the cycloaddition product.

Products of additive cyclization with ring closure at the nitrogen atom of the thiohetaryl unit were synthesized by the interaction of 4,6-dimethylpyrimidine-2-, 3-cyano-4,6-dimethylpyridine-2-, quinoline-8-, and 1,3-benzothiazole-2-sulfenyl chlorides with 3,3-dimethyl-1-butene.

2,3-Dihydrothiazolo[3,2-d]tetrazolium perchlorates have been synthesized by the interaction of 1-phenyl-5-tetrazolesulfenyl chloride with styrene and with (E)-1-phenylpropene in nitromethane in the presence of lithium perchlorate.

The title compound, [SnCl2(C5H4NSe)2], is the product of a reaction of 2,2'-dipyridyl diselenide with tin tetra-chloride. The mol-ecule is located about a twofold rotation axis. The coordination environment of the Sn(IV) atom is a distorted octa-hedron, with two bidentate 2-pyridine-seleno-late ligands inclined to each other at an angle of 83.96 (7)°. The two Sn-Cl and two Sn-N bonds are in cis configurations, while the two Sn-Se bonds of 2.5917 (3) Å are in a trans configuration, with an Se-Sn-Se angle of 157.988 (15)°. In the crystal, π-π inter-actions between the pyridine rings [centroid-to-centroid distance of 3.758 (3) Å] and weak inter-molecular C-H⋯Cl hydrogen bonds link the mol-ecules into chains along the c axis.

The title compound C8H8N2Se, is the product of the reaction of 2-chloro-1-methylbenzimidazole with sodium hydroselenide. The molecule is almost planar (r.m.s. deviation = 0.041 Å) owing to the presence of the long chain of conjugated bonds (Se=C—NMe—C=C—C=C—C=C—NH). The C=Se bond length [1.838 (2) Å] corresponds well to those found in the close analogs and indicates its pronounced double-bond character. In the crystal, molecules form helicoidal chains along the b axis by means of N—H...Se hydrogen bonds.

In recent years, we have developed a new approach to the synthesis of sulfur and nitrogen containing hetero cycles based on the polar cycloaddition of hetarenesulfenyl chlorides HetSCl to alkenes, dienes, and acetylenes accompanied by the ring closure through the nitrogen atom of the HetS fragment.1—6 In particular, it was found that the reactions of 2 pyridinesulfenyl chlorides con taining substituents in the pyridine moiety even with rather readily transformable bicyclic olefins, such as norbornene3 and norbornadiene,6 afford exclusively cycloaddition products with retention of the carbon skeleton of the starting unsaturated compound. With the aim of extend ing the synthetic scope of this approach, in the present study we examined the possibility of performing the tandem rearrangement—cyclization reaction with the use of readily available tetrafluorobenzobarrelene (1)7,8 as the model substrate. The choice of diene 1 was determined by the fact that its reactions with various electrophilic reagents, including sulfenylating agents, involve cascade skeletal rearrangements.8—10

In previous work [1–3], we synthesized a number of 2,3-dihydro[1,4]thiazino[2,3,4-ij]quinolinium-4 derivatives by the reaction of 8-quinolinesulfenyl chloride with alkenes. 8-Quinolineselanyl chloride (1) was obtained in a study of the feasibility of using this method for the synthesis of analogous selenium-nitrogencontaining heterocycles. The reactions of chloride 1 with indene 2 and styrene 3 were investigated. The reaction of selanyl chloride 1 with unsaturated compounds 2 and 3 in methylene chloride at 20°C leads to peri-fused systems 4 and 5 in 91 and 82% yield, respectively. H NMR spectroscopy showed that these reactions proceed regioand stereospecifically.

In recent years, we have developed a new approach to the synthesis of sulfur and nitrogen containing hetero cycles based on the polar cycloaddition of hetarenesulfenyl chlorides HetSCl to alkenes, dienes, and acetylenes accompanied by the ring closure through the nitrogen atom of the HetS fragment.1—6 In particular, it was found that the reactions of 2 pyridinesulfenyl chlorides con taining substituents in the pyridine moiety even with rather readily transformable bicyclic olefins, such as norbornene3 and norbornadiene,6 afford exclusively cycloaddition products with retention of the carbon skeleton of the starting unsaturated compound. With the aim of extend ing the synthetic scope of this approach, in the present study we examined the possibility of performing the tandem rearrangement—cyclization reaction with the use of readily available tetrafluorobenzobarrelene (1)7,8 as the model substrate. The choice of diene 1 was determined by the fact that its reactions with various electrophilic reagents, including sulfenylating agents, involve cascade skeletal rearrangements.8—10

The title compound, [SnCl(4)(C(10)H(8)N(2)Se)], was obtained by the reaction of 2,2'-dipyridyl diselenide with tin tetra-chloride. The Sn(IV) ion is coordinated by two N atoms [Sn-N = 2.266 (2) and 2.274 (2) Å] from the bis-(2-pyrid-yl)selenide ligand and four chloride anions [Sn-Cl = 2.3717 (6)-2.3939 (6) Å] in a distorted octa-hedral geometry. The central six-membered chelate ring has a boat conformation with the Se and Sn atoms deviating by 0.692 (3) and 0.855 (3) Å, respectively, from the mean plane through the remaining four ring atoms. The pyridine rings are inclined to each other by a dihedral angle of 49.62 (8)°. The crystal packing exhibits short inter-molecular Se⋯Cl contacts [3.5417 (7) and 3.5648 (7) Å], weak C-H⋯Cl hydrogen bonds and π-π stacking inter-actions between the pyridine rings with a centroid-centroid distance of 3.683 (3) Å.