Search

Changes in microbial community induced by acid shock were studied in the context of potential release of acids to the environment due to chemical accidents. The responses of microbial communities in three different soils to the exposure to sulfuric or hydrofluoric acid and to the subsequent neutralization treatment were investigated as functions of acid concentration and exposure time by using 16S-rRNA gene based pyrosequencing and DGGE (Denaturing Gradient Gel Electrophoresis). Measurements of soil pH and dissolved ion concentrations revealed that the added acids were neutralized to different degrees, depending on the mineral composition and soil texture. Hydrofluoric acid was more effectively neutralized by the soils, compared with sulfuric acid at the same normality. Gram-negative ß-Proteobacteria were shown to be the most acid-sensitive bacterial strains, while spore-forming Gram-positive Bacilli were the most acid-tolerant. The results of this study suggest that the Gram-positive to Gram-negative bacterial ratio may serve as an effective bio-indicator in assessing the impact of the acid shock on the microbial community. Neutralization treatments helped recover the ratio closer to their original values. The findings of this study show that microbial community changes as well as geochemical changes such as pH and dissolved ion concentrations need to be considered in estimating the impact of an acid spill, in selecting an optimal remediation strategy, and in deciding when to end remedial actions at the acid spill impacted site.

Cis-1,2,-dichloroethylene (cis-DCE) is a toxic, persistent contaminant occurring mainly as a daughter product of incomplete degradation of perchloroethylene (PCE) and trichloroethylene (TCE). This paper reports on abiotic reductive dechlorination of cis-DCE by mackinawite (FeS1−x ), a ferrous monosulfide, under variable geochemical conditions. To assess in situ abiotic cis-DCE dechlorination by mackinawite in the field, mackinawite suspensions prepared in a field groundwater sample collected from a cis-DCE contaminated field site were used for dechlorination experiments. The effects of geochemical variables on the dechlorination rates were monitored. A set of dechlorination experiments were also carried out in the presence of aquifer sediment from the site over a range of pH conditions to better simulate the actual field situations. The results showed that the suspensions of freshly prepared mackinawite reductively transformed cis-DCE to acetylene, whereas the conventionally prepared powder form of mackinawite had practically no reactivity with cis-DCE under the same experimental conditions. Significant cis-DCE degradation by mackinawite has not been reported prior to this study, although mackinawite has been shown to reductively transform PCE and TCE. This study suggests feasibility of using mackinawite for in situ remediation of cis-DCE-contaminated sites with high S levels such as estuaries under naturally achieved or stimulated sulfate-reducing conditions.

Cu(II) coordination in the interlayer of an expandable clay mineral montmorillonite is studied using X-ray absorption spectroscopy (XAS) along with electron paramagnetic resonance (EPR) and X-ray diffraction (XRD). Ab initio calculations are performed using FEFF code to reproduce the X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) portion of the experimentally measured XAS spectra. Cu(II) coordination changes depending on the Cu(II) loading and hydration state of the interlayer. XRD shows that the Cu-saturated montmorillonite has d001-spacing values corresponding to the interlayer thickness of four and one water layer(s) for the hydrated and dehydrated interlayers, respectively. EPR shows that Cu(II) in the fully hydrated, unsaturated interlayer behaves similarly to free Cu(II) ion in a bulk aqueous solution, while Cu(II) forms a square planar complex in the dehydrated interlayer. Cu(II) in the fully hydrated, Cu-saturated montmorillonite has a characteristic singlet 1st derivative XANES spectrum. FEFF calculations show that this singlet feature originates from a quasi-regular octahedral coordination of water molecules around the interlayer Cu(II) atom. All other samples and model compounds including the dry Cu-saturated montmorillonite, wet and dry unsaturated montmorillonite, aqueous Cu(II), cupric nitrate salt (Cu(NO3)2·4.5H2O), and Cu(II) hydroxide precipitates have doublet 1st derivative XANES spectra. FEFF calculations suggest that the doublet features arise from an axially elongated octahedral coordination under the Jahn–Teller effect or square planar coordination. FEFF calculations of the EXAFS spectra as a function of the axial oxygen bond length demonstrate that a destructive interference between backscattering from equatorial oxygen (Oeq) and that from axial oxygen (Oax) atoms leads to an apparent coordination number (CN) less than six expected for the tetragonal coordination, with the farther, loosely bound axial oxygen atoms making a minor, yet negative contribution to the CN determined by the EXAFS analysis. This study shows that Cu(II) has interchangeable octahedral, tetragonal, and square planar coordinations in the interlayer of montmorillonite, depending on Cu(II) loading and degree of hydration. The quasi-regular octahedral coordination of the interlayer Cu(II) in montmorillonite is a new finding of this study.

We reviewed literature focusing on the amounts of domestic production, distribution, and consumption of strong acids and their spill cases. In particular, we investigated the chemistry and toxicity of four strong acids classified as “accident preparedness substances,” including hydrochloric, nitric, sulfuric, and hydrofluoric acid. We recommend sulfuric and hydrofluoric acid as the chemicals of priority control based on the amounts used and toxicity. An advanced prevention/ response system needs to be established along with an improved human and social infrastructure to prevent and efficiently respond to chemical accidents. Understanding the behavior and transport of spilled strong acids in the soil and groundwater environments requires a multi-disciplinary approach since they go through a variety of chemical and biogeochemical reactions with complex geomedia. However, no such research has been done in this area in Korea to the best of our knowledge. We expect the results of this study to contribute as basic data to future research.

Reactions with aqueous sulfide are important in determining uranium (U) geochemistry under sulfate reducing conditions. This paper reports on abiotic reduction of U(VI) by aqueous sulfide under a range of experimental conditions using batch reactors. Dissolved U concentration was measured as a function of time to study the effects of chemical variables including pH, U(VI), S(−II), total dissolved carbonate (CARB = H 2 CO 3 * + HCO 3 − + CO 3 2− ), and Ca 2+ concentration on the U(VI) reduction rate. Solid phase reaction products were characterized using X-ray diffraction, X-ray absorption spectroscopy, and transmission electron microscopy. The chemical variables had impacts on the solid phase U(VI) reaction products as well as the reduction rates by aqueous sulfide. The solid U reaction product at circumneutral pH was identified as uraninite (UO 2+ x (s) ). Under basic pH conditions, whether a precipitate occurred depended on Ca 2+ and CARB concentrations. U(VI) reduction was faster under higher S(−II) concentrations but was slowed by increased dissolved Ca 2+ or CARB concentration. In the absence of dissolved CARB and Ca 2+ , a rapid decrease in dissolved U concentration occurred at circumneutral pH, while virtually no decrease was observed at pH 10.7 within the experimental timeframe of two days. The U(VI) reduction rate was proportional to the total concentration of free uranyl plus its hydrolysis complexes even at minor to trace concentrations. Dissolved Ca 2+ and CARB slow abiotic U(VI) reduction by forming stable Ca–U(VI)–carbonato soluble complexes that are resistant to reaction with aqueous sulfide. U(VI) reduction was slow in a synthetic solution representative of groundwater at a uranium mill tailings site. This study illustrates that abiotic U reduction by aqueous sulfide can significantly vary under typical ranges of chemical conditions in groundwater and newly demonstrates the importance of dissolved Ca 2+ in the abiotic U(VI) reduction by aqueous sulfide. The results contribute to our understanding of the impact of sulfate reducing conditions on U speciation in groundwater systems undergoing bioreduction conversion of U(VI) to less mobile U(IV) solid phases.

The long-term success of in situ reductive immobilization of uranium (U) depends on the stability of U(IV) precipitates (e.g., uraninite) in the presence of natural oxidants, such as oxygen, Fe(III) hydroxides, and nitrite. Field and laboratory studies have implicated iron sulfide minerals as redox buffers or oxidant scavengers that may slow oxidation of reduced U(IV) solid phases. Yet, the inhibition mechanism(s) and reaction rates of uraninite (UO2) oxidative dissolution by oxic species such as oxygen in FeS-bearing systems remain largely unresolved. To address this knowledge gap, abiotic batch experiments were conducted with synthetic UO2 in the presence and absence of synthetic mackinawite (FeS) under simulated groundwater conditions of pH = 7, P O 2 = 0.02 atm, and P CO 2 = 0.05 atm. The kinetic profiles of dissolved uranium indicate that FeS inhibited UO2 dissolution for about 51 h by effectively scavenging oxygen and keeping dissolved oxygen (DO) low. During this time period, oxidation of structural Fe(II) and S(-II) of FeS were found to control the DO levels, leading to the formation of iron oxyhydroxides and elemental sulfur, respectively, as verified by X-ray diffraction (XRD), Mossbauer, and X-ray absorption spectroscopy (XAS). After FeS was depleted due to oxidation, DO levels increased and UO2 oxidative dissolution occurred at an initial rate of rm = 1.2 ± 0.4 × 10−8 mol g−1 s−1, higher than rm = 5.4 ± 0.3 × 10−9 mol g−1 s−1 in the control experiment where FeS was absent. XAS analysis confirmed that soluble U(VI)-carbonato complexes were adsorbed by iron oxyhydroxides (i.e., nanogoethite and lepidocrocite) formed from FeS oxidation, which provided a sink for U(VI) retention. This work reveals that both the oxygen scavenging by FeS and the adsorption of U(VI) to FeS oxidation products may be important in U reductive immobilization systems subject to redox cycling events.

A novel bioreactor system, consisting of two biologically active carbon (BAC) reactors in series, was developed for the simultaneous removal of nitrate and arsenic from a synthetic groundwater supplemented with acetic acid. A mixed biofilm microbial community that developed on the BAC was capable of utilizing dissolved oxygen, nitrate, arsenate, and sulfate as the electron acceptors. Nitrate was removed from a concentration of approximately 50 mg/L in the influent to below the detection limit of 0.2 mg/L. Biologically generated sulfides resulted in the precipitation of the iron sulfides mackinawite and greigite, which concomitantly removed arsenic from an influent concentration of approximately 200 ug/L to below 20 ug/L through arsenic sulfide precipitation and surface precipitation on iron sulfides. This study showed for the first time that arsenic and nitrate can be simultaneously removed from drinking water sources utilizing a bioreactor system.

Iron sulfide minerals commonly found in natural anoxic Fe-S systems have been shown to reductively transform chlorinated hydrocarbons including trichloroethylene (TCE). In the present study, we tested the feasibility of applying an Fe(II) solution to a TCE-contaminated aquifer groundwater under simulated sulfide reducing conditions to enhance reductive transformation of TCE to nontoxic compounds. To achieve this goal, iron sulfide particles were precipitated under a range of pH and Fe:S molar ratios in aquifer groundwater samples from the Dugway Proving Grounds, Utah. Batch tests for abiotic reductive dechlorination of TCE were performed using the precipitates to establish the conditions for most favorable solids for dechlorination. Under all experimental conditions, the solids formed consisted mainly of mackinawite, a tetragonal reduced iron monosulfide FeS1-x . However, the precipitation conditions strongly affected the reactivity of the mackinawite particles formed. The results indicated that addition ...

The capacity of Desulfovibrio vulgaris to reduce U(VI) was studied previously with nongrowth conditions involving a high biomass concentration; thus, bacterial growth through respiration of U(VI) was not proven. In this study, we conducted a series of batch tests on U(VI) reduction by D. vulgaris at a low initial biomass (10 to 20 mg/L of protein) that could reveal biomass growth. D. vulgaris grew with U(VI) respiration alone, as well as with simultaneous sulfate reduction. Patterns of growth kinetics and solids production were affected by sulfate and Fe(2+). Biogenic sulfide nonenzymatically reduced 76% of the U(VI) and greatly enhanced the overall reduction rate in the absence of Fe(2+) but was rapidly scavenged by Fe(2+) to form FeS in the presence of Fe(2+). Biogenic U solids were uraninite (UO2) nanocrystallites associated with 20 mg/g biomass as protein. The crystallite thickness of UO2 was 4 to 5 nm without Fe(2+) but was1.4 nm in the presence of Fe(2+), indicating poor crystallization inhibited by adsorbed Fe(2+) and other amorphous Fe solids, such as FeS or FeCO3. This work fills critical gaps in understanding the metabolic utilization of U by microorganisms and formation of UO2 solids in bioremediation sites.

Abiotic degradation of cis-dichloroethylene (cis-DCE) and vinyl chloride (VC) was investigated using Fe hydroxides obtained by hydrolyzing Fe(II) salts over a pH range of 7.7–8.0. Within this narrow pH range, a green rust (GR) precipitated. The dechlorination reactivity of the resulting GR precipitates increased with the dissolved Fe(II) concentration remaining in solution after precipitation. Controls run using only the dissolved Fe(II) supernatant were not reactive, suggesting the relative amount of Fe(II) on the surface of precipitated GRs was the causative agent in the relative reactivity. To test this, a series of GR batches with varying dissolved Fe(II) concentrations were prepared by acid-base titration and examined for cis-DCE and VC dechlorination kinetics under reducing conditions. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses of these batches were performed to characterize the bulk mineralogy and the excess surface Fe(II), respectively. Cis-DCE and VC dechlorination results along with solid phase characterization show that different surface Fe(II)/Fe(III) compositions are responsible for the different reactivity of GRs formed within the GR precipitation zone.

Reaction of aqueous uranium(VI) with iron(II) monosulfide mackinawite in an O(2) and CO(2) free model system was studied by batch uptake measurements, equilibrium modeling, and L(III) edge U X-ray absorption spectroscopy (XAS). Batch uptake measurements showed that U(VI) removal was almost complete over the wide pH range between 5 and 11 at the initial U(VI) concentration of 5 × 10(-5) M. Extraction by a carbonate/bicarbonate solution indicated that most of the U(VI) removed from solution was reduced to nonextractable U(IV). Equilibrium modeling using Visual MINTEQ suggested that U was in equilibrium with uraninite under the experimental conditions. X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopy showed that the U(IV) phase associated with mackinawite was uraninite. Oxidation experiments with dissolved O(2) were performed by injecting air into the sealed reaction bottles containing mackinawite samples reacted with U(VI). Dissolved U measurement and XAS confirmed that the uraninite formed from the U(VI) reduction by mackinawite did not oxidize or dissolve under the experimental conditions. This study shows that redox reactions between U(VI) and mackinawite may occur to a significant extent, implying an important role of the ferrous sulfide mineral in the redox cycling of U under sulfate reducing conditions. This study also shows that the presence of mackinawite protects uraninite from oxidation by dissolved O(2). The findings of this study suggest that uraninite formation by abiotic reduction by the iron sulfide mineral under low temperature conditions is an important process in the redistribution and sequestration of U in the subsurface environments at U contaminated sites.

A study of U(VI) adsorption by aquifer sediment samples from a former uranium mill tailings site at Rifle, Colorado, was conducted under oxic conditions as a function of pH, U(VI), Ca, and dissolved carbonate concentration. Batch adsorption experiments were performed using2 mm size sediment fractions, a sand-sized fraction, and artificial groundwater solutions prepared to simulate the field groundwater composition. To encompass the geochemical conditions of the alluvial aquifer at the site, the experimental conditions ranged from 6.8 x 10(-8) to 10(-5) M in [U(VI)](tot), 7.2 to 8.0 in pH, 3.0 x 10(-3) to 6.0 x 10(-3) M in [Ca(2+)], and 0.05 to 2.6% in partial pressure of carbon dioxide. Surface area normalized U(VI) adsorption K(d) values for the sand and2 mm sediment fraction were similar, suggesting a similar reactive surface coating on both fractions. A two-site two-reaction, nonelectrostatic generalized composite surface complexation model was developed and successfully simulated the U(VI) adsorption data. The model successfully predicted U(VI) adsorption observed from a multilevel sampling well installed at the site. A comparison of the model with the one developed previously for a uranium mill tailings site at Naturita, Colorado, indicated that possible calcite nonequilibrium of dissolved calcium concentration should be evaluated. The modeling results also illustrate the importance of the range of data used in deriving the best fit model parameters.

As(III) uptake from solution by synthetic mackinawite is examined as a function of pH and initial As(III) concentration using X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD). XAS data indicate that when mackinawite is reacted at pH 5, 7, and 9 with 5 x 10(-4) M As(III), arsenic is reduced from its original +3 valence state and is primarily coordinated as As-S (approximately 2.26 angstroms) and As-As (approximately 2.54 angstroms), which is consistent with the formation of a realgar-like phase in agreement with XRD data. At 5 x 10(-5) M As(III), samples are markedly different from those collected at an order of magnitude higher concentration and differ at each pH value. The XAS analysis of mackinawite samples reacted with 5 x 10(-5) M As(III) shows a transition from As-O coordination to As-S coordination as pH decreases, with the sample reacted at pH 5 resembling realgar. Under alkaline conditions, arsenic retains its original valence state of +3 and is primarily coordinated to oxygen at a distance of 1.75 angstroms. This may be attributed to uptake by adsorption as an As(III) oxyanion. These results provide the basis for selecting the reactions needed for modeling and are beneficial in understanding the mechanisms of arsenite uptake by mackinawite under anoxic sulfidic conditions.