Search

The display of complex proteins on the surface of cells is of great importance for protein engineering and other fields of biotechnology. Herein, we describe a modular approach, in which the membrane anchor protein Lpp‐OmpA and a protein of interest (passenger) are expressed independently as genetically fused SpyCatcher and SpyTag units and assembled in situ by post‐translational coupling. Using fluorescent proteins, we first demonstrate that this strategy allows the construct to be installed on the surface of E. coli cells. The scope of our approach was then demonstrated by using three different functional enzymes, the stereoselective ketoreductase Gre2p, the homotetrameric glucose 1‐dehydrogenase GDH, and the bulky heme‐ and diflavin‐containing cytochrome P450 BM3 (BM3). In all cases, the SpyCatcher‐SpyTag method enabled the generation of functional whole‐cell biocatalysts, even for the bulky BM3, which could not be displayed by conventional fusion with Lpp‐OmpA. Furthermore, by using a GDH variant carrying an internal SpyTag, the system could be used to display an enzyme with unmodified N‐ and C‐termini., Room for independent folding. A surface display method employs the SpyCatcher‐SpyTag system for post‐translational in situ coupling of independently expressed and properly folded passenger enzymes and membrane anchors. The efficient surface display of delicate and complex enzymes expands the toolbox for the fabrication of productive whole‐cell biocatalysts.

Enantiopure α-hydroxy ketones are important building blocks of active pharmaceutical ingredients (APIs), which can be produced by thiamine-diphosphate-dependent lyases, such as benzaldehyde lyase. Here we report the discovery of a novel thermostable benzaldehyde lyase from Rhodococcus erythropolis R138 (ReBAL). While the overall sequence identity to the only experimentally confirmed benzaldehyde lyase from Pseudomonas fluorescens Biovar I (PfBAL) was only 65 %, comparison of a structural model of ReBAL with the crystal structure of PfBAL revealed only four divergent amino acids in the substrate binding cavity. Based on rational design, we generated two ReBAL variants, which were characterized along with the wild-type enzyme in terms of their substrate spectrum, thermostability and biocatalytic performance in the presence of different co-solvents. We found that the new enzyme variants have a significantly higher thermostability (up to 22 °C increase in T50 ) and a different co-solvent-dependent activity. Using the most stable variant immobilized in packed-bed reactors via the SpyCatcher/SpyTag system, (R)-benzoin was synthesized from benzaldehyde over a period of seven days with a stable space-time-yield of 9.3 mmol ⋅ L-1 ⋅ d-1 . Our work expands the important class of benzaldehyde lyases and therefore contributes to the development of continuous biocatalytic processes for the production of α-hydroxy ketones and APIs.

Continuous flow systems for chemical synthesis are becoming a major focus in organic chemistry and there is a growing interest in the integration of biocatalysts due to their high regio‐ and stereoselectivity. Methods established for 3D bioprinting enable the fast and simple production of agarose‐based modules for biocatalytic reactors if thermally stable enzymes are available. We report here on the characterization of four different cofactor‐free phenacrylate decarboxylase enzymes suitable for the production of 4‐vinylphenol and test their applicability for the encapsulation and direct 3D printing of disk‐shaped agarose‐based modules that can be used for compartmentalized flow microreactors. Using the most active and stable phenacrylate decarboxylase from Enterobacter spec. in a setup with four parallel reactors and a subsequent palladium(II) acetate‐catalysed Heck reaction, 4‐hydroxystilbene was synthesized from p‐coumaric acid with a total yield of 14.7 % on a milligram scale. We believe that, due to the convenient direct immobilization of any thermostable enzyme and straightforward tuning of the reaction sequence by stacking of modules with different catalytic activities, this simple process will facilitate the establishment and use of cascade reactions and will therefore be of great advantage for many research approaches., 3D printing in flow chemistry: 4‐Hydroxystilbene is obtained from p‐coumaric acid employing a phenacrylate decarboxylase enzyme immobilized in 3D‐printed agarose‐based flow reactor modules and a subsequent palladium(II) acetate‐catalyzed Heck reaction with a total yield of 14.7 % on a milligram scale.

The compartmentalization of chemical reactions is an essential principle of life that provides a major source of innovation for the development of novel approaches in biocatalysis. To implement spatially controlled biotransformations, rapid manufacturing methods are needed for the production of biocatalysts that can be applied in flow systems. Whereas three-dimensional (3D) printing techniques offer high-throughput manufacturing capability, they are usually not compatible with the delicate nature of enzymes, which call for physiological processing parameters. We herein demonstrate the utility of thermostable enzymes in the generation of biocatalytic agarose-based inks for a simple temperature-controlled 3D printing process. As examples we utilized an esterase and an alcohol dehydrogenase from thermophilic organisms as well as a decarboxylase that was thermostabilized by directed protein evolution. We used the resulting 3D-printed parts for a continuous, two-step sequential biotransformation in a fluidic setup.

The optimization of enzyme properties for specific reaction conditions enables their tailored use in biotechnology. Predictions using established computer-based methods, however, remain challenging, especially regarding physical parameters such as thermostability without concurrent loss of activity. Employing established computational methods such as energy calculations using FoldX can lead to the identification of beneficial single amino acid substitutions for the thermostabilization of enzymes. However, these methods require a three-dimensional (3D)-structure of the enzyme. In contrast, coevolutionary analysis is a computational method, which is solely based on sequence data. To enable a comparison, we employed coevolutionary analysis together with structure-based approaches to identify mutations, which stabilize an enzyme while retaining its activity. As an example, we used the delicate dimeric, thiamine pyrophosphate dependent enzyme ketoisovalerate decarboxylase (Kivd) and experimentally determined its stability represented by a T50 value indicating the temperature where 50% of enzymatic activity remained after incubation for 10 min. Coevolutionary analysis suggested 12 beneficial mutations, which were not identified by previously established methods, out of which four mutations led to a functional Kivd with an increased T50 value of up to 3.9°C.

We present a facile method for the combined synthesis and purification of protein-decorated DNA origami nanostructures (DONs). DONs bearing reductively cleavable biotin groups in addition to ligands for ligation of recombinant proteins are bound to magnetic beads. Protein immobilization is conducted with a large protein excess to achieve high ligation yields. Subsequent to cleavage from the solid support, pure sample solutions are obtained which are suitable for direct AFM analysis of occupation patterns. We demonstrate the method's utility using three different orthogonal ligation methods, the "halo-based oligonucleotide binder" (HOB), a variant of Halo-tag, the "SpyTag/SpyCatcher" (ST/SC) system, and the enzymatic "ybbR tag" coupling. We find surprisingly low efficiency for ST/SC ligation, presumably due to electrostatic repulsion and steric hindrance, whereas the ybbR method, despite its ternary nature, shows good ligation yields. Our method is particularly useful for the development of novel ligation methods and the synthesis of mechanically fragile DONs that present protein patterns for surface-based cell assays.

All-enzyme hydrogels are efficient reagents for continuous flow biocatalysis. These materials can be obtained by self-assembly of two oligomeric enzymes, modified with the complementary SpyTag and SpyCatcher units. To facilitate access to the large proportion of biocatalytically relevant monomeric enzymes, we demonstrate that the tagging valency of the monomeric (S)-stereoselective ketoreductase Gre2p from Saccharomyces cerevisiae can be designed to assemble stable, active hydrogels with the cofactor-regenerating glucose 1-dehydrogenase GDH from Bacillus subtilis. Mounted in microfluidic reactors, these gels revealed high conversion rates and stereoselectivity in the reduction of prochiral methylketones under continuous flow for more than 8 days. The sequential use as well as parallelization by ‘numbering up’ of the flow reactor modules demonstrate that this approach is suitable for syntheses on the semipreparative scale.

A convenient reverse micellar one-pot reaction yields multifunctional silica nanoparticles, which can be tailored to effectively suppress non-specific adsorption and, at the same time, enable efficient specific covalent immobilization of proteins. Using two highly sensitive proteins, it is demonstrated that the new particles provide a suitable microenvironment to maintain the protein's activity.

A generic methodology for cytosolic delivery of large supramolecular multiprotein complexes into living cells is described that takes advantage of the highly-controllable bottom-up fabrication of protein-decorated DNA nanostructures and the microfluidic “cell squeezing” technique. Therein, cells are deformed upon passage through a narrow constriction leading to formation of transient holes in the cell membrane that enable the diffusion of the protein-DNA nanostructures from the surrounding buffer into the cytosol. A diverse set of multiprotein complexes was assembled on DNA origami nanostructures using streptavidin and the sensitive glucose sensor protein FLIP as model systems. We demonstrate that our approach allows for the direct cytosolic delivery of these multifunctional protein complexes into the cytosol of HeLa cells. We also demonstrate that targeting groups can be incorporated into the protein-DNA nanoassemblies to enable their intracellular targeting to cytosolic compartments, such as the cytoskeleton or nucleus. We believe that this methodology will open up novel strategies for research in fundamental cell biology, such as the reverseengineering of the supramolecular machinery involved in gene regulation, cell signalling, or cell division. Furthermore, direct applications in immunotherapy can be foreseen.

A synthetic substrate enables a new colorimetric screen for terpene synthase cyclization activity, facilitating the engineering of these enzymes. Using directed evolution, the thermostability of the sesquiterpene synthase BcBOT2 was increased without the loss of other properties. The technique also enabled rapid optimization of conditions for expression and stabilization in lysate of another terpene synthase, SSCG_02150.

The establishment of microfluidic enzyme cascades is a topical field of research and development, which is currently hampered by the lack of methodologies for mild and efficient immobilization of isolated enzymes. We here describe the use of self-immobilizing fusion enzymes for the modular configuration of microfluidic packed-bed reactors. Specifically, three different enzymes, the (R)-selective alcohol dehydrogenase LbADH, the (S)-selective methylglyoxal reductase Gre2p and the NADP(H) regeneration enzyme glucose 1-dehydrogenase GDH, were genetically fused with streptavidin binding peptide, Spy and Halo-based tags, to enable their specific and directional immobilization on magnetic microbeads coated with complementary receptors. The enzyme-modified beads were loaded in four-channel microfluidic chips to create compartments that have the capability for either (R)- or (S)-selective reduction of the prochiral CS-symmetrical substrate 5-nitrononane-2,8-dione (NDK). Analysis of the isomeric hydroxyketone and ...

We report on the rational engineering of the binding interface of the self-ligating HaloTag protein to generate an optimized linker for DNA nanostructures. Five amino acids positioned around the active-site entry channel for the chlorohexyl ligand (CH) of the HaloTag protein were exchanged for positively charged lysine amino acids to produce the HOB (halo-based oligonucleotide binder) protein. HOB was genetically fused with the enzyme cytochrome P450 BM3, as well as with BMR, the separated reductase domain of BM3. The resulting HOB-fusion proteins revealed significantly improved rates in ligation with CH-modified oligonucleotides and DNA origami nanostructures. These results suggest that the efficient self-assembly of protein-decorated DNA structures can be greatly improved by fine-tuning of the electrostatic interactions between proteins and the negatively charged nucleic acid nanostructures.

The potential advantages of biological production of chemicals or fuels from biomass at high temperatures include reduced enzyme loading for cellulose degradation, decreased chance of contamination, and lower product separation cost. In general, high temperature production of compounds that are not native to the thermophilic hosts is limited by enzyme stability and the lack of suitable expression systems. Further complications can arise when the pathway includes a volatile intermediate. Here we report the engineering of Geobacillus thermoglucosidasius to produce isobutanol at 50 °C. We prospected various enzymes in the isobutanol synthesis pathway and characterized their thermostabilities. We also constructed an expression system based on the lactate dehydrogenase promoter from Geobacillus thermodenitrificans. With the best enzyme combination and the expression system, 3.3 g/l of isobutanol was produced from glucose and 0.6 g/l of isobutanol from cellobiose in G. thermoglucosidasius within 48 h at 50 °C. This is the first demonstration of isobutanol production in recombinant bacteria at an elevated temperature.

Mutation of the sesquiterpene synthase Cop2 was conducted with a high-throughput screen for the cyclization activity using a non-natural substrate. A mutant of Cop2 was identified that contained three amino acid substitutions. This mutant, 17H2, converted the natural substrate FPP into germacrene D-4-ol with 77% selectivity. This selectivity is in contrast to that of the parent enzyme in which germacrene D-4-ol is produced as 29% and α-cadinol is produced as 46% of the product mixture. The mutations were shown to each contribute to this selectivity, and a homology model suggested that the mutations lie near to the active site though would be unlikely to be targeted for mutation by rational methods. Kinetic comparisons show that 17H2 maintains a k_(cat)/K_M of 0.62 mM^(−1) s^(−1), which is nearly identical to that of the parent Cop2, which had a k_(cat)/K_M of 0.58 mM^(−1) s^(−1).

Protein-DNA conjugates have found numerous applications in the field of diagnostics and nanobiotechnology, however, their intrinsic susceptibility to DNA degradation by nucleases represents a major obstacle for many applications. We here report the selective covalent conjugation of the protein streptavidin (STV) with phosphorothioate oligonucleotides (psDNA) containing a terminal alkylthiolgroup as the chemically addressable linking unit, using a heterobifunctional NHS-/maleimide crosslinker. The psDNA-STV conjugates were synthesized in about 10% isolated yields. We demonstrate that the terminal alkylthiol group selectively reacts with the maleimide while the backbone sulfur atoms are not engaged in chemical conjugation. The novel psDNA-STV conjugates retain their binding capabilities for both biotinylated macromolecules and the complementary nucleic acid. Moreover, the psDNA-STV conjugate retained its binding capacity for complementary oligomers even after a nuclease digestion step, which effectively degrades deoxyribonucleotide oligomers and thus the binding capability of regular DNA-STV conjugates. The psDNA-STV therefore hold particular promise for applications e.g. in proteome research and novel biosensing devices, where interfering endogenous nucleic acids need to be removed from analytes by nuclease digestion.

Colloidal CdS nanoparticles are conjugated with a variety of proteins, including enhanced yellow fluorescent protein, tobacco etch virus protease (TEV), lysozyme, and bacterial cytochrome P450 CYP152A1, and the photochemical properties of the resulting conjugates are analyzed by EPR spectroscopy and hydroxyl radical-specific fluorimetric assay. While irradiation of bare CdS colloids leads to photogeneration of hydroxyl and superoxide radicals, it is surprisingly observed that coating of the CdS particles with proteins effectively suppresses the production of these radical species and instead leads to increased formation of a long-lived reactive oxygen species, most likely H(2)O(2). A mechanism for the observed results is suggested. The empirical results are capitalized on for the assembly of a CdS-TEV nanohybrid, which shows significantly higher performance as a photocatalytic mediator for fatty acid hydroxylation by CYP152A1 than bare CdS nanoparticles.

The modulation of peroxidase activity by fatty acid additives and organic cosolvents was determined and compared for four bacterial cytochrome P450 enzymes, thermostable P450 CYP119A1, the P450 domain of CYP102A1 (BMP), CYP152A1 (P450(bsbeta)), and CYP101A1 (P450(cam)). Utilizing a high-throughput microplate assay, we were able to readily screen more than 100 combinations of enzymes, additives and cosolvents in a convenient and highly reproducible assay format. We found that, in general, CYP119A1 and BMP showed an increase in peroxidative activity in the presence of fatty acids, whereas CYP152A1 revealed a decrease in activity and CYP101A1 was only slightly affected. In particular, we observed that the conversion of the fluorogenic peroxidase substrate Amplex Red by CYP119A1 and BMP was increased by a factor of 38 or 11, respectively, when isopropanol and lauric acid were present in the reaction mixture. The activity of CYP119A1 could thus be modulated to reach more than 90% of the activity of CYP152A1 without effectors, which is the system with the highest peroxidative activity. For all P450s investigated we found distinctive reactivity patterns, which suggest similarities in the binding site of CYP119A1 and BMP in contrast with the other two proteins studied. Therefore, this study points towards a role of fatty acids as activators for CYP enzymes in addition to being mere substrates. In general, our detailed description of fatty acid- and organic solvent-effects is of practical interest because it illustrates that optimization of modulators and cosolvents can lead to significantly increased yields in biocatalysis.

Cytochrome P450 enzymes are known to catalyze a variety of reactions that are difficult to perform by standard organic synthesis, such as the oxidation of unactivated C--C bonds. Cytochrome P450 enzymes can also be used in artificial systems in which organic peroxides act as cosubstrates. To find substrates that are converted by a certain P450 catalyst in the presence of an organic peroxide, various screening assays have been established, however, most of them are limited to one or only a few specific substrates. Here, we report a simple and rapid screening assay that works independently of the nature of the substrate and utilizes a previously undescribed reactivity of catalase as reporter enzyme. In an initial demonstration of this assay, we screened 180 enzyme/peroxide/substrate combinations for potential bioconversions. As shown by subsequent verification of the screening results with liquid chromatography/multistage mass spectrometry (LC/MS(n)), we were able to identify three new substrates for the enzyme CYP152A1 and at least two previously undescribed conversions by the enzyme CYP119.

We here report on the developments of semisynthetic DNA‐protein conjugates and their assembly into multi‐component nanostructures. We describe the improvement of the DNA sequences embedded in such nanostructures by computational and analytical methods. Moreover, we report on the exploration of novel DNA conjugates of streptavidin or redox proteins with improved properties for the assembly of nucleic acid based nanostructures.

Finding the optimal combinations of ligands for tissue-specific delivery is tedious even if only a few well-established compounds are tested. The cargo affects the receptor-ligand interaction, especially when it is charged like DNA. The ligand should therefore be evaluated together with its cargo. Several viruses have been shown to interact with more than one receptor, for efficient internalization. We here present a DNA oligonucleotide-based method for inexpensive and rapid screening of biotin labeled ligands for combinatorial effects on cellular binding and uptake. The oligonucleotide complex was designed as a 44 bp double-stranded DNA oligonucleotide with one central streptavidin molecule and a second streptavidin at the terminus. The use of a highly advanced robotic platform ensured stringent processing and execution of the experiments. The oligonucleotides were fluorescently labeled and used for detection and analysis of cell-bound, internalized and intra-cellular compartmentalized constructs by an automated line-scanning confocal microscope, IN Cell Analyzer 3000. All possible combinations of 22 ligands were explored in sets of 2 and tested on 6 different human cell lines in triplicates. In total, 10 000 transfections were performed on the automation platform. Cell-specific combinations of ligands were identified and their relative position on the scaffold oligonucleotide was found to be of importance. The ligands were found to be cargo dependent, carbohydrates were more potent for DNA delivery whereas cell penetrating peptides were more potent for delivery of less charged particles. © 2008 American Institute of Physics.

Deactivation of release factor 1 by polyclonal antibodies in an in vitro translation system, which was used to express the esterase gene, led to the reversible elimination of naturally occurring termination. This technique allowed the antibiotic puromycin to be used as an acceptor substrate for the peptidyl residue in the peptidyl-transferase reaction. This resulted in more than 80 % yield of protein with C-terminally incorporated puromycin. pCpPuromycin that was either conjugated with the Cy3 fluorophor or biotin by N4 alkylation of cytosine, also acted as an acceptor substrate for the peptidyl-transferase reaction and was incorporated into the protein C terminus. The resulting conjugates possessed Cy3-specific fluorescence and affinity to streptavidin-coated surfaces, respectively. This left the enzymatic activity of the reporter protein unaffected. It was also shown that extension of puromycin on its 5'-hydroxyl end by up to ten deoxyoligonucleotides also allowed conjugation with the C terminus of in vitro translated protein when RF1-dependent termination was suppressed. However, the conjugation yield decreased upon addition of more than six nucleotides.

On page 1, Introduction, Column 2, line 8 from bottom “An exception is G. thermoglucosidasius, for which transformation procedures enabling metabolic manipulation have been established (Cripps et al., 2009)” Should read “An exception is G. thermoglucosidasius, for which transformation procedures enabling metabolic manipulation have been established (Taylor et al., 2008; Cripps et al., 2009; Bartosiak-Jentys et al., 2012, 2013).” On page 7, Discussion, Column 2, the first sentence “Although this organism has an established transformation protocol and an integration vector system for gene replacements (Cripps et al., 2009), no expression system has been established. Here, we identified a robust promoter to drive gene expression from a plasmid, and we characterized enzymes for isobutanol biosynthesis at elevated temperature.” Should read “Previously, transformation procedures, plasmid-based expression systems, and gene replacement protocols have been established for this organism (Taylor et al., 2008; Cripps et al., 2009; Bartosiak-Jentys et al., 2012, 2013). In this work, we determined that the ldh promoter from G. thermodenitrificans is suitable for driving the expression of the isobutanol pathway genes, and we characterized enzymes for isobutanol biosynthesis at 50 1C.”