Search

Metal oxide semiconductor (MOS) thin films are promising sensing layer for integration in gas sensor devices for detecting toxic and harmful molecules. Herein, tungsten oxide (WO3) thin films are deposited on interdigital electrodes by vacuum thermal evaporation to realize batch fabrication of high-performance gas sensors. Subsequent annealing at different temperatures allows for regulation of the concentration of oxygen vacancies in the WO3 films, which has been found to exert a great influence on the sensor properties. In addition, the surface structure of WO3 films is also highly dependent on the annealing temperature. Gas sensing investigations show that the WO3 sensor annealed at 500 °C possesses the best sensing properties for detecting triethylamine (TEA) including very high response, good selectivity, fast response, and low limit of detection (63 ppb). The excellent sensor performances are attributed to the enhanced adsorption of oxidative oxygen species due to the presence of abundant oxygen vacancies. The scalable fabrication of WO3 thin film gas sensors and the oxygen vacancy engineering strategy proposed herein may shed some light to developing high performance environmental sensors.

Methanol has long been used as a hole scavenger in photocatalysis to improve charge separation. Although the prototypical methanol/TiO2(110) system shows salient adsorption-state-dependent photoact...

Herein, an environmentally friendly CoP/Zn2In2S5 catalyst is reported as a visible-light photocatalyst for the selective activation of the α-C-H bond of methanol to generate ethylene glycol with a selectivity of as high as 90%. The catalytic system also illustrates the first example of visible-light-driven dehydrogenative coupling of ethanol to 2,3-butanediol.

Atenolol (ATL), a kind of largely used beta-blockers, has been widely detected in the aquatic environment, which could cause adverse impact on human beings. In this study, bismuth oxychloride (BiOCl) photocatalyst was synthesized and applied to remove ATL in the aqueous system under simulated natural light. Emphasis was laid on the reaction kinetics and the impact of natural organic matter (NOM) (0–20 mg/L). Possible transformation pathways were systematically investigated based on identification of reaction products via liquid chromatography-mass spectrometry (LC-MS). As a consequence, BiOCl presents highly photocatalytic efficiency yielding up to nearly 100% ATL conversion after 60 min of interaction, together with fairly high photostability evidenced by considerably efficient removal of ATL after 10 catalytic cycles. Four kinds of possible products are detected using LC-MS in the process of reaction, indicating possible transformation ways of ATL photocatalysis. NOM has an inhibiting impact on the removal of ATL and influences the products distribution. This study provides an emerging nanocatalyst for ATL photodegradation and could eventually lead to development of novel methods to control pharmaceutical contamination in water.

In this study, we systematically investigated the effect of multiwall carbon nanotubes (MWCNTs) on the removal of tetrabromobisphenol A (TBBPA) mediated by horseradish peroxidase (HRP) at varying important conditions. The results suggested that the presence of MWCNTs significantly enhanced the removal of TBBPA mediated by HRP and the reaction rate constant was linear with the MWCNTs dosage. The enhancement of MWCNTs on the HRP-mediated reaction was attributed to two facts, one is that MWCNTs protected HRP from inactivation, the other is that the presence of MWCNTs made the homogeneous reaction of TBBPA be heterogeneous reaction by adsorbing TBBPA on its surface. Moreover, the influence of MWCNTs on TBBPA products distribution was further elucidated. We found that the species of reaction product had no difference between the HRP-mediated systems with and without the presence of MWCNTs. However, the presence of MWCNTs significantly decreased the yields of each product. These results give insight into the role of MWCNTs in HRP-mediated TBBPA reactions and provide theoretical foundation for potential development of novel enzymatic methods to control TBBPA contamination. MWCNTs enhanced the removal of TBBPA mediated by HRP/H2O2, because it protected HRP from inactivation and adsorbed TBBPA on its surface to form a heterogeneous reaction process.

Laccase is a multicopper oxidase containing four coppers as reaction sites, including one type 1, one type 2, and two type 3. We here provide the first experimental data showing that As (III) can be effectively removed from water and transformed to As (V) through reactions mediated by laccase with the presence of oxygen. To this end, the As (III) removal, As (V) yields, total protein, active laccase, and copper concentrations in the aqueous phase were determined, respectively. Additionally, electron paramagnetic resonance spectra and UV-vis spectra were applied to probe possible structural changes of the laccase during the reaction. The data offer the first evidence that laccase can be inactivated by As (III) attack thus leading to the release of type 2 copper. The released copper has no reactivity with the As (III). These findings provide new ideas into a significant pathway likely to master the environmental transformation of arsenite, and advance the understanding of laccase inactivation mechanisms, thus providing a foundation for optimization of enzyme-based processes and potential development for removal and remediation of arsenite contamination in the environment.