Search

In the development of structural composites based on regenerated cellulose filaments, the physical and chemical interactions at the fibre-matrix interphase need to be fully understood. In the present study, continuous yarns and filaments of viscose (rayon) were treated with either polymeric diphenylmethane diisocyanate (pMDI) or a pMDI-based hardener for polyurethane resins. The effect of isocyanate treatment on mechanical yarn properties was evaluated in tensile tests. A significant decrease in tensile modulus, tensile force and elongation at break was found for treated samples. As revealed by size exclusion chromatography, isocyanate treatment resulted in a significantly reduced molecular weight of cellulose, presumably owing to hydrolytic cleavage caused by hydrochloric acid occurring as an impurity in pMDI. Yarn twist, fibre moisture content and, most significantly, the chemical composition of the isocyanate matrix were identified as critical process parameters strongly affecting the extent of reduction in mechanical performance. To cope with the problem of degradative reactions an additional step using calcium carbonate to trap hydrogen ions is proposed.

Two enzyme based strategies for hydrophobic functionalization of lignocellulose materials were developed and mechanistically compared using sinapic acid and the dimer syringylglycerol β-guaiacyl ether as models respresenting (hardwood) lignin substructures for coupling fatty acid esters. Coupling of lipase/hydrogen peroxide treated methyl linoleate to sinapic acid indeed resulted in a 1:1 coupling product with an m/z peak at 575.5 measured with HPLC–MS. Using laccase for coupling, oligo/polymerization of sinapic acid seems to prevent a coupling-reaction to methyl linoleate. However, methyl linoleate was successfully coupled by laccase 1:1 onto syringylglycerol β-guaiacyl ether through the ether bond at position four. The efficient enzyme mediated incorporation of fatty acid esters as hydrophobic molecules were further confirmed when triglycerides were used to treat veneers resulting in a water contact angle increase from 58.3° to 93.5°. Thus, this study demonstrates for the first time that both (laccase mediator and lipase-hydrogen peroxide) systems can act as promising strategies for introducing fatty acid esters in wood leading to increased hydrophobization.

Among synthetic thermoplastic fiber materials for reinforcement, high modulus and low shrinkage poly(ethylene terephthalate) (HMLS-PET) became the major carcass material for the low- to medium-end tire segment. Usually cords are coated with a resorcinol–formaldehyde–latex (RFL) dip to achieve acceptable power transmission. However, the low concentration of polar groups on the PET’s surface requires an additional activation with costly and potentially toxic chemicals to create additional nucleophilic groups prior to RFL dipping. Here, a green enzyme based alternative to chemical HMLS-PET activation was investigated. Four different cutinase variants from Thermobifida cellulosilytica were shown to hydrolyze HMLS-PET cords, creating new carboxylic and hydroxyl groups with distinct exoendo-wise selectivity. The highest degree of enzymatic functionalization reached a concentration of 0.51 nmol mm–2 of COOH with a release of 1.35 mM of soluble products after 72 h. The chemical treatment with 1 M NaOH released mo...

Summary Due to the rising global environment protection awareness, recycling strategies that comply with the circular economy principles are needed. Polyesters are among the most used materials in the textile industry; therefore, achieving a complete poly(ethylene terephthalate) (PET) hydrolysis in an environmentally friendly way is a current challenge. In this work, a chemo-enzymatic treatment was developed to recover the PET building blocks, namely terephthalic acid (TA) and ethylene glycol. To monitor the monomer and oligomer content in solid samples, a Fourier-transformed Raman method was successfully developed. A shift of the free carboxylic groups (1632 cm−1) of TA into the deprotonated state (1604 and 1398 cm−1) was observed and bands at 1728 and 1398 cm−1 were used to assess purity of TA after the chemo-enzymatic PET hydrolysis. The chemical treatment, performed under neutral conditions (T = 250 °C, P = 40 bar), led to conversion of PET into 85% TA and small oligomers. The latter were hydrolysed in a second step using the Humicola insolens cutinase (HiC) yielding 97% pure TA, therefore comparable with the commercial synthesis-grade TA (98%).

Rayon filaments composed of regenerated cellulose are used as reinforcement materials in tires and to a lower extent in the clothing industry as personal protective equipment e.g. flame retardant cellulosic based materials. After use, these materials are currently transferred to landfills while chemical degradation does not allow the recovery of the cellulose (as glucose) nor the separation of the high valuable flame-retardant pigment. In this study, rayon fibers were enzymatically hydrolyzed to allow recovery of glucose and valuable additives. The glucose was successfully used as carbon source for the production of high value compounds such as itaconic acid, lactic acid and chitosan. 14.2 g/L of itaconic acid, 36.5 g/L of lactic acid and 39.2 g/L of chitosan containing biomass were produced from Escherichia coli, Lactobacillus paracasei and Aspergillus niger, respectively, comparable to yields obtained when using commercial glucose as carbon source.

Poly(lactic acid) as a biodegradable thermoplastic polyester has received increasing attention. This renewable polyester has found applications in a wide range of products such as food packaging, textiles and biomedical devices. Its major drawbacks are poor toughness, slow degradation rate and lack of reactive side-chain groups. An enzymatic process for the grafting of carboxylic acids onto the surface of poly(L-lactic acid) (PLLA) films was developed using Candida antarctica lipase B as a catalyst. Enzymatic hydrolysis of the PLLA film using Humicola insolens cutinase in order to increase the number of hydroxyl and carboxylic groups on the outer polymer chains for grafting was also assessed and showed a change of water contact angle from 74.6 to 33.1° while the roughness and waviness were an order of magnitude higher in comparison to the blank. Surface functionalization was demonstrated using two different techniques, (14) C-radiochemical analysis and X-ray photoelectron spectroscopy (XPS) using (14) C-butyric acid sodium salt and 4,4,4-trifluorobutyric acid as model molecules, respectively. XPS analysis showed that 4,4,4-trifluorobutyric acid was enzymatically coupled based on an increase of the fluor content from 0.19 to 0.40%. The presented (14) C-radiochemical analyses are consistent with the XPS data indicating the potential of enzymatic functionalization in different reaction conditions.

Cutinases have shown potential for hydrolysis of the recalcitrant synthetic polymer polyethylene terephthalate (PET). We have shown previously that the rate of this hydrolysis can be enhanced by the addition of hydrophobins, small fungal proteins that can alter the physicochemical properties of surfaces. Here we have investigated whether the PET-hydrolyzing activity of a bacterial cutinase from Thermobifida cellulosilytica (Thc_Cut1) would be further enhanced by fusion to one of three Trichoderma hydrophobins, i.e., the class II hydrophobins HFB4 and HFB7 and the pseudo-class I hydrophobin HFB9b. The fusion enzymes exhibited decreased k cat values on soluble substrates ( p -nitrophenyl acetate and p -nitrophenyl butyrate) and strongly decreased the hydrophilicity of glass but caused only small changes in the hydrophobicity of PET. When the enzyme was fused to HFB4 or HFB7, the hydrolysis of PET was enhanced >16-fold over the level with the free enzyme, while a mixture of the enzyme and the hydrophobins led only to a 4-fold increase at most. Fusion with the non-class II hydrophobin HFB9b did not increase the rate of hydrolysis over that of the enzyme-hydrophobin mixture, but HFB9b performed best when PET was preincubated with the hydrophobins before enzyme treatment. The pattern of hydrolysis by the fusion enzymes differed from that of Thc_Cut1 as the concentration of the product mono(2-hydroxyethyl) terephthalate relative to that of the main product, terephthalic acid, increased. Small-angle X-ray scattering (SAXS) analysis revealed an increased scattering contrast of the fusion proteins over that of the free proteins, suggesting a change in conformation or enhanced protein aggregation. Our data show that the level of hydrolysis of PET by cutinase can be significantly increased by fusion to hydrophobins. The data further suggest that this likely involves binding of the hydrophobins to the cutinase and changes in the conformation of its active center.

To study hydrolysis of aromatic and aliphatic polyesters cutinase 1 from Thermobifida cellulosilytica (Thc_Cut1) was expressed in P. pastoris. No significant differences between the expression of native Thc_Cut1 and of two glycosylation site knock out mutants (Thc_Cut1_koAsn and Thc_Cut1_koST) concerning the total extracellular protein concentration and volumetric activity were observed. Hydrolysis of poly(ethylene terephthalate) (PET) was shown for all three enzymes based on quantification of released products by HPLC and similar concentrations of released terephthalic acid (TPA) and mono(2-hydroxyethyl) terephthalate (MHET) were detected for all enzymes. Both tested aliphatic polyesters poly(butylene succinate) (PBS) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were hydrolyzed by Thc_Cut1 and Thc_Cut1_koST, although PBS was hydrolyzed to significantly higher extent than PHBV. These findings were also confirmed via quartz crystal microbalance (QCM) analysis; for PHBV only a small mass change was observed while the mass of PBS thin films decreased by 93% upon enzymatic hydrolysis with Thc_Cut1. Although both enzymes led to similar concentrations of released products upon hydrolysis of PET and PHBV, Thc_Cut1_koST was found to be significantly more active on PBS than the native Thc_Cut1. Hydrolysis of PBS films by Thc_Cut1 and Thc_Cut1_koST was followed by weight loss and scanning electron microscopy (SEM). Within 96 h of hydrolysis up to 92 and 41% of weight loss were detected with Thc_Cut1_koST and Thc_Cut1, respectively. Furthermore, SEM characterization of PBS films clearly showed that enzyme tretment resulted in morphological changes of the film surface., Frontiers in Microbiology, 8, ISSN:1664-302X

The potential of limited enzymatic poly(ethylene terephthalate) (PET) surface hydrolysis for the modification of track-etched (TE) membranes was investigated. Cutinases 1 and 2 from Thermobifida cellulosilytica as well as a fusion protein of cutinase 1 with the polymer binding module from the polyhydroxyalkanoate depolymerase of Alcaligenes faecalis (Thc_Cut1_PBM) were shown to hydrolyse highly crystalline PET TE membranes with a pore diameter of ∼120nm at very narrow size distribution. Furthermore the effects of surface chemistry were investigated by comparison of enzymatic hydrolysis by Thc_Cut1_PBM of "as received" PET TE membranes with two surface functionalized versions towards a "hydrophilic" and a more "hydrophobic" surface. The effects of adsorbed protein and the efficacy of cleaning steps after enzymatic treatment were elucidated by complementary methods for surface analysis and membrane characterization. With the optimized cleaning protocol, all adsorbed protein could be removed from the enzyme-treated membranes and effects of chemical surface functionalization of the PET TE membranes were demonstrated. The highest efficiency of enzymatic surface hydrolysis was observed for the original PET TE membranes, leading to an 0.36% weight loss corresponding to a removal of ∼3nm PET from the entire surface of the porous membrane. This correlates very well with the measured increase of barrier pore diameter by 4nm (a radius reduction? of 2nm), leading to about a two-fold increased water permeability.

Natural fibers have gained much attention as reinforcing components in composite materials. Despite several interesting characteristics like low cost, low density, high specific properties and biodegradability they show poor compatibility with the polymer matrix. We have shown that it is possible to use a laccase from Trametes hirsuta as a biocatalyst to attach different types of functional phenolic molecules onto the fibers. A 5% incorporation of the functional molecules was achieved as measured via X-ray photoelectron spectroscopy (XPS) in flax although it was lower in coconut fibers. In combination with different mediators it was possible to broaden the activation scope and graft hydrophobic molecules like dimer fatty amines. Among the different mediators tested 1-hydroxybenzotriazole (HBT), 2,2,6,6-tetramethylpiperidin-1-yloxy (TEMPO) and 2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS), TEMPO were the most effective achieving a 10% increase in carbon as measured by XPS.

The potential of two hydrolytic enzymes, namely a lipase from Thermomyces lanuginosus (TlL) and a cutinase from Humicola insolens (HiC) for hydrolysis of the phthalic acid backbone based polyester coatings was assessed. Two phthalic acid/trimethylolpropane based model substrates resembling the structure of the polyester backbone of coatings were synthesized. Out of both enzymes, only the cutinase was able to hydrolyze both model substrates while the larger substrate was hydrolyzed at a lower rate. The cutinase was also able to hydrolyze a coating (alkyd resin) both in suspension and as dried film. LC–MS analysis of the hydrolysis products released from the coating revealed the presence of oleic acid, its monoglyceride, phthalic acid and 2-((3-((2-((2,3-dihydroxypropoxy)carbonyl)benzoyl)oxy)-2-hydroxypropoxy)carbonyl)benzoic acid. These results indicate that the enzyme was able to hydrolyze the polyester backbone as well as to release fatty acid side chains. Consequently, enzymatic hydrolysis has a potential for the removal of coatings, their recycling or their functionalization.

Phenol red is a cytocompatible pH sensing dye that is commonly added to cell culture media, but removed from some media formulations due to its structural mimicry of estrogen. Phenol red free media is also used during live cell imaging, to avoid absorbance and fluorescence quenching of fluorophores. To overcome these complications, we developed cytocompatible and degradable phenol red-silk tyrosine cross-linked hydrogels using horseradish peroxidase (HRP) enzyme and hydrogen peroxide (H2O2). Phenol red added to silk during tyrosine crosslinking accelerated di-tyrosine formation in a concentration-dependent reaction. Phenol red diffusion studies and UV–Vis spectra of phenol red-silk tyrosine hydrogels at different pHs showed altered absorption bands, confirming entrapment of dye within the hydrogel network. LC–MS of HRP-reacted phenol red and N-acetyl- l -tyrosine reaction products confirmed covalent bonds between the phenolic hydroxyl group of phenol red and tyrosine on the silk. At lower phenol red concentrations, leak-proof hydrogels which did not release phenol red were fabricated and found to be cytocompatible based on live-dead staining and alamar blue assessments of encapsulated fibroblasts. Due to the spectral overlap between phenol red absorbance at 415 nm and di-tyrosine fluorescence at 417 nm, phenol red-silk hydrogels provide both absorbance and fluorescence-based pH sensing. With an average pKa of 6.8 and good cytocompatibiltiy, phenol red-silk hydrogels are useful for pH sensing in phenol red free systems, cellular microenvironments and bioreactors. Statement of Significance Phenol red entrapped within hydrogels facilitates pH sensing in phenol red free environments. Leak-proof phenol red based pH sensors require covalent binding techniques, but are complicated due to the lack of amino or carboxyl groups on phenol red. Currently, there is no simple, reliable technique to covalently link phenol red to hydrogel matrices, for real-time pH sensing in cell culture environments. Herein, we take advantage of phenolic groups for covalent linkage of phenol red to silk tyrosine in the presence of HRP and H2O2. The novelty of the current system stems from its simplicity and the use of silk protein to create a cytocompatible, degradable sensor capable of real-time pH sensing in cell culture microenvironments.

The polymer industry is under pressure to mitigate the environmental cost of petrol-based plastics. Biotechnologies contribute to the gradual replacement of petrol-based chemistry and the development of new renewable products, leading to the closure of carbon circle. An array of bio-based building blocks is already available on an industrial scale and is boosting the development of new generations of sustainable and functionally competitive polymers, such as polylactic acid (PLA). Biocatalysts add higher value to bio-based polymers by catalyzing not only their selective modification, but also their synthesis under mild and controlled conditions. The ultimate aim is the introduction of chemical functionalities on the surface of the polymer while retaining its bulk properties, thus enlarging the spectrum of advanced applications.

The application of ultrasound was found to enhance enzymatic hydrolysis of poly(ethylene terephthalate) (PET). After a short activation phase up to 6.6times increase in the amount of released products was found. PET powder with lower crystallinity of 8% was hydrolyzed faster when compared to PET with 28% crystallinity. Ultrasound activation was found to be around three times more effective on powders vs. films most likely due to a larger surface area accessible to the enzyme.

In this study we investigated the ability of amidases to hydrolyse polyurethane polyester co-polymers. In order to improve enzyme adsorption, a polyamidase from Nocardia farcinica (PA) was fused to a polymer binding module from a polyhydroxyalkanoate depolymerase from Alcaligenes faecalis (PA_PBM). The activity of these enzymes and of various commercially available amidases on a synthesized soluble model substrate was compared. The recombinant native PA showed the highest activity of 10.5 U/mg followed by PA_PBM with an activity of 1.13 U/mg. Both enzymes were able to cleave the urethane bond in polyurethane-polyesters with different degree of crystallinity as shown by FTIR. According to LC-TOF analysis the monomer 4,4′-diaminodiphenylmethane (MDA) and the oligomers 4-hydroxybutyl (3-(3-aminobenzyl)phenyl)carbamate [B], bis(4-hydroxybutyl) (methylenebis(3,1-phenylene))dicarbamate [C] and 4-(((3-(3-(((4-hydroxybutoxy)carbonyl)amino)benzyl)phenyl)carbamoyl)oxy)butyl (4-hydroxybutyl) adipate [D] were released. The polymer with a higher content of the rigid segment, MDA, was hydrolysed to a lower extent. Interestingly, despite the lower activity on the soluble model substrate, the PA_PBM fusion enzyme was up to 4 times more active on the polymer when compared with the native enzyme, confirming the relevance of enzyme adsorption for efficient hydrolysis.

The application of Candida antarctica lipase B in enzyme-catalyzed synthesis of aromatic-aliphatic oligoesters is here reported. The aim of the present study is to systematically investigate the most favorable conditions for the enzyme catalyzed synthesis of aromatic-aliphatic oligomers using commercially available monomers. Reaction conditions and enzyme selectivity for polymerization of various commercially available monomers were considered using different inactivated/activated aromatic monomers combined with linear polyols ranging from C2 to C12 . The effect of various reaction solvents in enzymatic polymerization was assessed and toluene allowed to achieve the highest conversions for the reaction of dimethyl isophthalate with 1,4-butanediol and with 1,10-decanediol (88 and 87% monomer conversion respectively). Mw as high as 1512 Da was obtained from the reaction of dimethyl isophthalate with 1,10-decanediol. The obtained oligomers have potential applications as raw materials in personal and home care formulations, for the production of aliphatic-aromatic block co-polymers or can be further functionalized with various moieties for a subsequent photo- or radical polymerization.

The aim of the study is to activate inert PET surface in order to introduce the carboxyl groups and to obtain its hydrophilic character. Two advanced and environmentally friendly techniques were used for these purposes: i) oxygen plasma activation; ii) enzymatic treatment by cutinase. Differently treated PET foils were studied in terms of carboxylic group content (non-aqueous potentiometric titrations, XPS) and hydrophobic/hydrophilic character (goniometry). Moreover, the influence of both activation procedures onto chitosan adsorption was examined by XPS, zeta potential measurements and ATR-FTIR spectroscopy. Obtained results show that plasma activation gives for around 19% higher amount of carboxylic groups than cutinase treatment and is during the storage less stable. Results clearly show that the use of both surfaces activation processes increases the ability of PET foils for chitosan adsorption. Due to the fact that chitosan is an antimicrobial agent, obtained materials may be applied as an active packaging system. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

A two step enzymatic process for grafting phenolics onto polyamides (PAs) was developed in order to impart special functionalities to inert PA. Therefore, a polyamidase (NfpolyA) from Nocardia farcinica was overexpressed in Escherichia coli BL21-Gold(DE3) and purified in a single step. With p -nitroacetanilide as a substrate, NfpolyA revealed a specific activity of 20 U mg −1 compared to 1.5 U mg −1 for the wild-type enzyme. NfpolyA showed a K M value of 0.12 ± 0.01 mM and a k cat of 19.1 s −1 which were both higher than measured for the wild-type enzyme ( k cat = 3.5 s −1 ; K M = 0.06 mM). A laccase from Trametes hirsuta was used to oxidize ferulic acid, used as a phenol model substrate and study the covalent grafting of n-butylamine, as model substrate for PA. According to LC–MS, up to three equivalents of n-butylamine were bound to ferulic acid after laccase oxidation of ferulic acid. Both enzymes were used sequentially in a two step process. In a first step the polyamidase is used to partially hydrolyze the amide bond, leading to a surface with amine and carboxylic acids. In a second step, by using a laccase from T. hirsuta ferulic acid was grafted onto the surface of PA as confirmed with FTIR-ATR analysis.

A new esterase from Thermobifida halotolerans (Thh_Est) was cloned and expressed in E. coli and investigated for surface hydrolysis of polylactic acid (PLA) and polyethylene terephthalate (PET). Thh_Est is a member of the serine hydrolases superfamily containing the -GxSxG- motif with 85–87% homology to an esterase from T. alba, to an acetylxylan esterase from T. fusca and to various Thermobifida cutinases. Thh_Est hydrolyzed the PET model substrate bis(benzoyloxyethyl)terephthalate and PET releasing terephthalic acid and mono-(2-hydroxyethyl) terephthalate in comparable amounts (19.8 and 21.5 mmol/mol of enzyme) while no higher oligomers like bis-(2-hydroxyethyl) terephthalate were detected. Similarly, PLA was hydrolyzed as indicated by the release of lactic acid. Enzymatic surface hydrolysis of PET and PLA led to a strong hydrophilicity increase, as quantified with a WCA decrease from 90.8° and 75.5° to 50.4° and to a complete spread of the water drop on the surface, respectively.

A new cutinase from Thermobifida alba (Tha_Cut1) was cloned and characterized for polyethylene terephthalate (PET) hydrolysis. Tha_Cut1 showed a high degree of identity to a T. cellulolysitica cutinase with only four amino acid differences outside the active site area, according to modeling data. Yet, Tha_Cut1 was more active in terms of PET surface hydrolysis leading to considerable improvement in hydrophilicity quantified based on a decrease of the water contact angle from 87.7° to 45.0°. The introduction of new carboxyl groups was confirmed and measured after esterification with the fluorescent reagent alkyl bromide, 2-(bromomethyl) naphthalene (BrNP), resulting in a fluorescence emission intensity increase from 980 to 1420 a.u. On the soluble model substrates p-nitrophenyl acetate (PNPA) and p-nitrophenyl butyrate (PNPB), the cutinase showed Km values of 213 and 1933 μM and kcat values of 2.72 and 6.03 s−1 respectively. The substrate specificity was investigated with bis(benzoyloxyethyl)terephthalate ...

In this study cutinases from Thermobifida cellulosilytica DSM44535 (Thc_Cut1 and Thc_Cut2) and Thermobifida fusca DSM44342 (Thf42_Cut1) hydrolyzing poly(ethylene terephthalate) (PET) were successfully cloned and expressed in E.coli BL21-Gold(DE3). Their ability to hydrolyze PET was compared with other enzymes hydrolyzing natural polyesters, including the PHA depolymerase (ePhaZmcl) from Pseudomonas fluorescens and two cutinases from T. fusca KW3. The three isolated Thermobifida cutinases are very similar (only a maximum of 18 amino acid differences) but yet had different kinetic parameters on soluble substrates. Their kcat and Km values on pNP–acetate were in the ranges 2.4–211.9 s–1 and 127–200 μM while on pNP–butyrate they showed kcat and Km values between 5.3 and 195.1 s–1 and between 1483 and 2133 μM. Thc_Cut1 released highest amounts of MHET and terephthalic acid from PET and bis(benzoyloxyethyl) terephthalate (3PET) with the highest concomitant increase in PET hydrophilicity as indicated by water contact angle (WCA) decreases. FTIR-ATR analysis revealed an increase in the crystallinity index A1340/A1410 upon enzyme treatment and an increase of the amount of carboxylic and hydroxylic was measured using derivatization with 2-(bromomethyl)naphthalene. Modeling the covalently bound tetrahedral intermediate consisting of cutinase and 3PET indicated that the active site His-209 is in the proximity of the O of the substrate thus allowing hydrolysis. On the other hand, the models indicated that regions of Thc_Cut1 and Thc_Cut2 which differed in electrostatic and in hydrophobic surface properties were able to reach/interact with PET which may explain their different hydrolysis efficiencies., This study was performed within the Austrian Centre of Industrial Biotechnology ACIB, the MacroFun project and COST Action 868. This work has been supported by the Federal Ministry of Economy, Family and Youth (BMWFJ), the Federal Ministry of Traffic, Innovation and Technology (bmvit), the Styrian Business Promotion Agency SFG, the Standortagentur Tirol and ZIT - Technology Agency of the City of Vienna through the COMET-Funding Program managed by the Austrian Research Promotion Agency FFG. Financial support was also given from Sachsisches Staatsministerium fur Umwelt und Landwirtschaft, Germany. PET was kindly provided by Dr. Vincent Nierstrasz from Ghent University.

From a screening on agar plates with bis(benzoyloxyethyl) terephthalate (3PET), a Bacillus subtilis p-nitrobenzylesterase (BsEstB) was isolated and demonstrated to hydrolyze polyethyleneterephthalate (PET). PET-hydrolase active strains produced clearing zones and led to the release of the 3PET hydrolysis products terephthalic acid (TA), benzoic acid (BA), 2-hydroxyethyl benzoate (HEB), and mono-(2-hydroxyethyl) terephthalate (MHET) in 3PET supplemented liquid cultures. The 3PET-hydrolase was isolated from non-denaturating polyacrylamide gels using fluorescein diacetate (FDA) and identified as BsEstB by LC-MS/MS analysis. BsEstB was expressed in Escherichia coli with C-terminally fused StrepTag II for purification. The tagged enzyme had a molecular mass of 55.2 kDa and a specific activity of 77 U/mg on p-nitrophenyl acetate and 108 U/mg on p-nitrophenyl butyrate. BsEstB was most active at 40°C and pH 7.0 and stable for several days at pH 7.0 and 37°C while the half-life times decreased to 3 days at 40°C and only 6 h at 45°C. From 3PET, BsEstB released TA, MHET, and BA, but neither bis(2-hydroxyethyl) terephthalate (BHET) nor hydroxyethylbenzoate (HEB). The kcat values decreased with increasing complexity of the substrate from 6 and 8 (s-1) for p-nitrophenyl-acetate (4NPA) and p-nitrophenyl-butyrate (4NPB), respectively, to 0.14 (s-1) for bis(2-hydroxyethyl) terephthalate (BHET). The enzyme hydrolyzed PET films releasing TA and MHET with a concomitant decrease of the water-contact angle (WCA) from 68.2°±1.7° to 62.6°±1.1° due to formation of novel hydroxyl and carboxyl groups. These data correlated with a fluorescence emission intensity increase seen for the enzyme treated sample after derivatization with 2-(bromomethyl)naphthalene.

A cutinase from Thermomyces cellullosylitica (Thc_Cut1), hydrolyzing the synthetic polymer polyethylene terephthalate (PET), was fused with two different binding modules to improve sorption and thereby hydrolysis. The binding modules were from cellobiohydrolase I from Hypocrea jecorina (CBM) and from a polyhydroxyalkanoate depolymerase from Alcaligenes faecalis (PBM). Although both binding modules have a hydrophobic nature, it was possible to express the proteins in E. coli . Both fusion enzymes and the native one had comparable kcat values in the range of 311 to 342 s(-1) on pNP-butyrate, while the catalytic efficiencies kcat/Km decreased from 0.41 s(-1)/ μM (native enzyme) to 0.21 and 0.33 s(-1)/μM for Thc_Cut1+PBM and Thc_Cut1+CBM, respectively. The fusion enzymes were active both on the insoluble PET model substrate bis(benzoyloxyethyl) terephthalate (3PET) and on PET although the hydrolysis pattern was differed when compared to Thc_Cut1. Enhanced adsorption of the fusion enzymes was visible by chemiluminescence after incubation with a 6xHisTag specific horseradish peroxidase (HRP) labeled probe. Increased adsorption to PET by the fusion enzymes was confirmed with Quarz Crystal Microbalance (QCM-D) analysis and indeed resulted in enhanced hydrolysis activity (3.8× for Thc_Cut1+CBM) on PET, as quantified, based on released mono/oligomers.

Biocompatibility is a major challenge for successful application of many biomaterials. In this study the ability to coat chemically and enzymatically activated poly(L-lactic acid) (PLA) membranes with heat denatured human serum albumin to improve biocompatibility was investigated. PLA membranes hydrolyzed with NaOH or cutinase and then treated with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide, hydrochloride (EDAC) as a heterobifunctional cross-linker promoted the coupling single bondCOOH groups on PLA membranes and single bondNH2 groups of heat denatured human serum albumin. This resulted in increased hydrophilicity (lowest water contact angles of 43° and 35°) and highest antioxidant activity (quenching of 79 μM and 115 μM tetramethylazobisquinone (TMAMQ) for NaOH and cutinase pretreated membranes, respectively). FTIR analysis of modified PLA membranes showed new peaks attributed to human serum albumin (amide bond, NH2 and side chain stretching) appearing within 3600–3000 cm−1 and 1700–1500 cm−1 (Fig. 3). MTT studies also showed that osteoblasts-like and MC-3T3-E1 cells viability increased 2.4 times as compared to untreated PLA membranes. The study therefore shows that this strategy of modifying the surfaces of PLA polymers could significantly improve biocompatibility., This work has been supported by the Federal Ministry of Economy, Family and Youth (BMWFJ), the Federal Ministry of Traffic, Innovation and Technology (bmvit), the Styrian Business Promotion Agency SFG, the Standortagentur Tirol and ZIT – Technology Agency of the City of Vienna through the COMET-Funding Program managed by the Austrian Research Promotion Agency FFG and EU-NOVO Project.