Search

As part of the MILAGRO 2006 field campaign, the exchange of atmospheric aerosols with the urban landscape was measured from a tall tower erected in a heavily populated neighborhood of Mexico City. Urban submicron aerosol fluxes were measured using an eddy covariance method with a quadrupole aerosol mass spectrometer during a two week period in March, 2006. Nitrate and ammonium aerosol concentrations were elevated at this location near the city center compared to measurements at other urban sites. Significant downward fluxes of nitrate aerosol, averaging −0.2 μg m−2 s−1, were measured during daytime. The urban surface was not a significant source of sulfate aerosols. The measurements also showed that primary organic aerosol fluxes, approximated by hydrocarbon-like organic aerosols (HOA), displayed diurnal patterns similar to CO2 fluxes and anthropogenic urban activities. Overall, 47% of submicron organic aerosol emissions were HOA, 35% were oxygenated (OOA) and 18% were associated with biomass burning (BBOA). Organic aerosol fluxes were bi-directional, but on average HOA fluxes were 0.1 μg m−2 s−1, OOA fluxes were −0.03 μg m−2 s−1, and BBOA fluxes were −0.03 μg m−2 s−1. After accounting for size differences (PM1 vs PM2.5) and using an estimate of the black carbon component, comparison of the flux measurements with the 2006 gridded emissions inventory of Mexico City, showed that the daily-averaged total PM emission rates were essentially identical for the emission inventory and the flux measurements. However, the emission inventory included dust and metal particulate contributions, which were not included in the flux measurements. As a result, it appears that the inventory underestimates overall PM emissions for this location. more...

Data from a recent field campaign in Mexico City are used to evaluate the performance of the EPA Federal Reference Method for monitoring the ambient concentrations of NO2. Measurements of NO2 from standard chemiluminescence monitors equipped with molybdenum oxide converters are compared with those from Tunable Infrared Laser Differential Absorption Spectroscopy (TILDAS) and Differential Optical Absorption Spectroscopy (DOAS) instruments. A significant interference in the chemiluminescence measurement is shown to account for up to 50% of ambient NO2 concentration during afternoon hours. As expected, this interference correlates well with non-NOx reactive nitrogen species (NOz) as well as with ambient O3 concentrations, indicating a photochemical source for the interfering species. A combination of ambient gas phase nitric acid and alkyl and multifunctional alkyl nitrates is deduced to be the primary cause of the interference. Observations at four locations at varying proximities to emission sources indicate that the percentage contribution of HNO3 to the interference decreases with time as the air parcel ages. Alkyl and multifunctional alkyl nitrate concentrations are calculated to reach concentrations as high as several ppb inside the city, on par with the highest values previously observed in other urban locations. Averaged over the MCMA-2003 field campaign, the chemiluminescence monitor interference resulted in an average measured NO2 concentration up to 22% greater than that from co-located spectroscopic measurements. Thus, this interference has the potential to initiate regulatory action in areas that are close to non-attainment and may mislead atmospheric photochemical models used to assess control strategies for photochemical oxidants. more...

A wide array of volatile organic compound (VOC) measurements was conducted in the Valley of Mexico during the MCMA-2002 and 2003 field campaigns. Study sites included locations in the urban core, in a heavily industrial area and at boundary sites in rural landscapes. In addition, a novel mobile-laboratory-based conditional sampling method was used to collect samples dominated by fresh on-road vehicle exhaust to identify those VOCs whose ambient concentrations were primarily due to vehicle emissions. Four distinct analytical techniques were used: whole air canister samples with Gas Chromatography/Flame Ionization Detection (GC-FID), on-line chemical ionization using a Proton Transfer Reaction Mass Spectrometer (PTR-MS), continuous real-time detection of olefins using a Fast Olefin Sensor (FOS), and long path measurements using UV Differential Optical Absorption Spectrometers (DOAS). The simultaneous use of these techniques provided a wide range of individual VOC measurements with different spatial and temporal scales. The VOC data were analyzed to understand concentration and spatial distributions, diurnal patterns, origin and reactivity in the atmosphere of Mexico City. The VOC burden (in ppbC) was dominated by alkanes (60%), followed by aromatics (15%) and olefins (5%). The remaining 20% was a mix of alkynes, halogenated hydrocarbons, oxygenated species (esters, ethers, etc.) and other unidentified VOCs. However, in terms of ozone production, olefins were the most relevant hydrocarbons. Elevated levels of toxic hydrocarbons, such as 1,3-butadiene, benzene, toluene and xylenes, were also observed. Results from these various analytical techniques showed that vehicle exhaust is the main source of VOCs in Mexico City and that diurnal patterns depend on vehicular traffic in addition to meteorological processes. Finally, examination of the VOC data in terms of lumped modeling VOC classes and its comparison to the VOC lumped emissions reported in other photochemical air quality modeling studies suggests that some alkanes are underestimated in the emissions inventory, while some olefins and aromatics are overestimated. more...

The performance of the EPA Federal Equivalent Method (FEM) technique for monitoring ambient concentrations of O3 via ultraviolet absorption (UV) has been evaluated using data from the Mexico City Metropolitan Area field campaign (MCMA-2003). Comparisons of UV O3 monitors with open path Differential Optical Absorption Spectroscopy (DOAS) and open path Fourier Transform Infrared (FTIR) spectroscopy instruments in two locations revealed average discrepancies in the measured concentrations between +13% to −18%. Good agreement of two separate open path DOAS measurements at one location indicated that spatial and temporal inhomogeneities were not substantially influencing comparisons of the point sampling and open path instruments. The poor agreement between the UV O3 monitors and the open path instruments was attributed to incorrect calibration factors for the UV monitors, although interferences could not be completely ruled out. Applying a linear correction to these calibration factors results in excellent agreement of the UV O3 monitors with the co-located open path measurements; regression slopes of 0.94 to 1.04 and associated R2 values of >0.89. A third UV O3 monitor suffered from large spurious interferences, which were attributed to extinction of UV radiation within the monitor by fine particles ( more...

Atmospheric tracer release techniques have been used to quantify low-level fugitive methane emissions from components and facilities in all sectors of the natural gas system in the United States. The emission data are collected as part of a program to extrapolate the emissions from the entire U.S. natural gas industry and thus reduce uncertainties in the environmental impact of increased natural gas use. In these experiments, the total methane emission from a site is measured by releasing a tracer gas (SF6) at the natural gas facility to simulate the source. Both methane and tracer levels are measured with real-time instruments deployed in a mobile laboratory downwind of the site. A large range of emission levels for the different sectors of the entire system was determined. Within any one group of a particular facility type there is also much variability in the emission rates. The exact nature and number of gas system components in a facility are important factors in determining its emission level. more...

During the summer of 1992, isoprene emissions were measured in a mixed deciduous forest near Oak Ridge, Tennessee. Measurements were aimed at the experimental scale-up of emissions from the leaf level to the forest canopy to the mixed layer. Results from the scale-up study are compared to different canopy models for determining the leaf microclimate as input to isoprene emission algorithms. These include (1) no canopy effects, (2) a simple vertical scaling canopy model with a leaf energy balance, and (3) a numerical canopy model which accounts for leaf-sun geometries, photosynthesis, respiration, transpiration, and gas transport in the canopy. Initial evaluation of the models was based upon a standard emission rate factor of 90 μgC g-1 hr-1 (0.42 nmol g-1 s-1) taken from leaf cuvette measurements and a biomass density factor of 203 g m-2 taken from biomass surveys and a flux footprint analysis. The results indicated that predicted fluxes were consistent among the models to within approximately ±20%, but that the models overestimated the mean flux by about a factor of 2 and overestimated the maximum observed flux by 30 to 50%. Adjusting the standard emission factor and biomass density each downward by 20% yielded predicted means approximately 20% greater than the observed means and predicted maxima approximately 25% less than the observed maxima. Accounting for changes in biomass density as a function of direction upwind of the tower improved the overall model performance. more...

Methane (CH4) emissions were measured from the Nashua, New Hampshire municipal landfill using static enclosure and atmospheric tracer methods. The spatial variability of emissions was also examined using geostatistical methods. One hundred and thirty nine enclosure measurements were performed on a regular grid pattern over the emitting surface of the landfill resulting in an estimate of whole landfill emissions of 15,800 L CH4 min−1. Omnidirectional variograms displayed spatial correlation among CH4 fluxes below a separation distance of 7 m. Eleven tracer tests, using sulfur hexafluoride (SF6) as a tracer gas, resulted in a mean emissions estimate of 17,750 L CH4 min−1. The favorable agreement between the emission estimates was further refined using the observed relationship between atmospheric pressure and CH4 flux. This resulted in a pressure-corrected tracer flux estimate of whole landfill emissions of 16,740 L CH4 min−1. more...

We have investigated methane emissions from urban sources in the former East Germany using innovative measurement techniques including a mobile real-time methane instrument and tracer release experiments. Anthropogenic and biogenic sources were studied with the emphasis on methane emissions from gas system sources, including urban distribution facilities and a production plant. Methane fluxes from pressure regulating stations ranged from 0.006 to 24. l/min. Emissions from diffuse sources in urban areas were also measured with concentration maps and whole city flux experiments. The area fluxes of the two towns studied were 0.37 and 1.9 μg/m2/s. The emissions from individual gas system stations and total town emissions of this study are comparable to results of similar sites examined in the United States. more...

Field measurements of methane emissions from landfills are essential if one is to accurately constrain uncertainties in current estimates of global methane emissions from landfills and document emissions reductions realized by currently available control technology. Two experimental techniques for the measurement of methane flux from landfills, flux chamber measurements and tracer flux techniques, have been evaluated at a 24 hectare landfill site in New England. Agreement between the two techniques was quite good, with the flux chamber technique giving a landfill wide methane flux of 16.4 m 3 CH 4 min -1 while a series of seven tracer flux tests resulted in a mean flux of 17.8 m 3 CH 4 min -1 . Model estimates suggest that the installation of gas recovery measures at the five largest landfill sites in the state of New Hampshire and the ten largest sites in Massachusetts would reduce landfill emissions in each state by approximately 75%, resulting in a total emissions reduction of 65 x 10 9 g CH 4 /yr. more...

Isoprene emission rates from Engelmann ( Picea engelmannii ), red ( Picea rubens ), and black ( Picea mariana ) spruce were measured from groups of seedlings in a controlled environmental chamber. Standard isoprene emission rate factors, obtained from measurements over an array of light and temperature conditions, ranged from 1 to 16 μgCg −1 h −1 at 30°C and 1000 μmolm −2 s −1 photosynthetically active radiation. Emission measurements were also collected using a dynamic enclosure technique from branches of a mature white spruce ( Picea glauca ) through a complete growing season. These data indicate that isoprene emissions, normalized to standard conditions, are moderate in spring and fall (∼ 7 μgC g −1 h −1 at 30°C, 1000 μmol m −2 s −1 ) with a maximum in mid-summer (∼ 12 μgCg −1 h −1 at 30°C, 1000 μmolm −2 s −1 ) Isoprene from white spruce represented more than 90% of the total identified hydrocarbons. Branch enclosure measurements from limited survey samples for blue spruce ( Picea pungens ) yielded a standard emission rate of 12 μgC g −1 h −1 while samples for Norway spruce ( Picea abies ) indicated very little isoprene emitted ( −1 h −1 ). The wide range of isoprene emissions from these different spruce species suggest that improvements in hydrocarbon emission inventories may require detailed species distribution data. On a regional basis, this may be especially true in Europe where 22% of isoprene emissions are estimated to be from spruce and in boreal regions where spruce is a dominant part of the ecosystem. more...

Eddy covariance (EC) flux measurements of the atmosphere/surface exchange of gases over an urban area are a direct way to improve and evaluate emissions inventories, and, in turn, to better understand urban atmospheric chemistry and the role that cities play in regional and global chemical cycles. As part of the MCMA-2003 study, we demonstrated the feasibility of using eddy covariance techniques to measure fluxes of selected volatile organic compounds (VOCs) and CO2 [CO subscript 2] from a residential district of Mexico City (Velasco et al., 2005a, b). During the MILAGRO/MCMA-2006 field campaign, a second flux measurement study was conducted in a different district of Mexico City to corroborate the 2003 flux measurements, to expand the number of species measured, and to obtain additional data for evaluation of the local emissions inventory. Fluxes of CO2 [CO subscript 2] and olefins were measured by the conventional EC technique using an open path CO2 [CO subscript 2] sensor and a Fast Isoprene Sensor calibrated with a propylene standard. In addition, fluxes of toluene, benzene, methanol and C2-benzenes [C subscript 2 - benzenes] were measured using a virtual disjunct EC method with a Proton Transfer Reaction Mass Spectrometer. The flux measurements were analyzed in terms of diurnal patterns and vehicular activity and were compared with the most recent gridded emissions inventory. In both studies, the results showed that the urban surface of Mexico City is a net source of CO2 [CO subscript 2] and VOCs with significant contributions from vehicular traffic. Evaporative emissions from commercial and other anthropogenic activities were significant sources of toluene and methanol. The data show that the emissions inventory is in reasonable agreement with measured olefin and CO2 [CO subscript 2] fluxes, while C2-benzenes [C subscript 2 - benzenes] and toluene emissions from evaporative sources are overestimated in the inventory. It appears that methanol emissions from mobile sources occur, but are not present in the mobile emissions inventory., National Science Foundation (U.S.) (Grant ATM-0528227), United States. Dept. of Energy (Award DE-FG02-05ER63980), Mexico. Comisión Ambiental Metropolitana, Molina Center for Energy and the Environment more...

Ambient concentrations of isoprene and several of its atmospheric oxidation productsmethacrolein, methylvinyl ketone, formaldehyde, formic acid, acetic acid, and pyruvic acid-were measured in a central Pennsylvania deciduous forest during the summer of 1988. Isoprene concentrations ranged from near zero at night to levels in excess of 30 ppbv during daylight hours. During fair weather periods, midday isoprene levels normally fell in the 5–10 ppbv range. Methacrolein and methylvinyl ketone levels ranged from less than 0.5 ppbv to greater than 3 ppbv with average midday concentrations in the 1 to 2 ppbv range. The diurnal behavior of formaldehyde paralleled that of isoprene with ambient concentrations lowest (∼1 ppbv) in the predawn hours and highest (>9.0 ppbv) during the afternoon. The organic acids peaked during the midday period with average ambient concentration of 2.5, 2.0, and 0.05 ppbv for formic, acetic, and pyruvic acid, respectively. These data indicate that oxygenated organics comprise a large fraction of the total volatile organic carbon containing species present in rural, forested regions of the eastern United States. Consequently, these compounds need to be included in photochemical models that attempt to simulate oxidant behavior and/or atmospheric acidity in these forested regions. more...

Landfills are the largest source of anthropogenic methane (CH4) emissions to the atmosphere in the United States. However, few measurements of whole landfill CH4 emissions have been reported. Here, we present the results of a multi-season study of whole landfill CH4 emissions using atmospheric tracer methods at the Nashua, New Hampshire Municipal landfill in the northeastern United States. The measurement data include 12 individual emission tests, each test consisting of 5-8 plume measurements. Measured emissions were negatively correlated with surface atmospheric pressure and ranged from 7.3 to 26.5 m3 CH4 min(-1). A simple regression model of our results was used to calculate an annual emission rate of 8.4 x 10(6) m3 CH4 year(-1). These data, along with CH4 oxidation estimates based on emitted landfill gas isotopic characteristics and gas collection data, were used to estimate annual CH4 generation at this landfill. A reported gas collection rate of 7.1 x 10(6) m3 CH4 year(-1) and an estimated annual rate of CH4 oxidation by cover soils of 1.2 x 10(6) m3 CH4 year(-1) resulted in a calculated annual CH4 generation rate of 16.7 x 10(6) m3 CH4 year(-1). These results underscore the necessity of understanding a landfill's dynamic environment before assessing long-term emissions potential. more...

Isoprene fluxes were estimated using eight different measurement techniques at a forested site near Oak Ridge, Tennessee, during July and August 1992. Fluxes from individual leaves and entire branches were estimated with four enclosure systems, including one system that controls leaf temperature and light. Variations in isoprene emission with changes in light, temperature, and canopy depth were investigated with leaf enclosure measurements. Representative emission rates for the dominant vegetation in the region were determined with branch enclosure measurements. Species from six tree genera had negligible isoprene emissions, while significant emissions were observed for Quercus, Liquidambar, and Nyssa species. Above-canopy isoprene fluxes were estimated with surface layer gradients and relaxed eddy accumulation measurements from a 44-m tower. Midday net emission fluxes from the canopy were typically 3 to 5 mg C m−2 h−1, although net isoprene deposition fluxes of −0.2 to −2 mg C m−2 h−1 were occasionally observed in early morning and late afternoon. Above-canopy CO2 fluxes estimated by eddy correlation using either an open path sensor or a closed path sensor agreed within ±5%. Relaxed eddy accumulation estimates of CO2 fluxes were within 15% of the eddy correlation estimates. Daytime isoprene mixing ratios in the mixed layer were investigated with a tethered balloon sampling system and ranged from 0.2 to 5 ppbv, averaging 0.8 ppbv. The isoprene mixing ratios in the mixed layer above the forested landscape were used to estimate isoprene fluxes of 2 to 8 mg C m−2 h−1 with mixed layer gradient and mixed layer mass balance techniques. Total foliar density and dominant tree species composition for an approximately 8100 km2 region were estimated using high-resolution (30 m) satellite data with classifications supervised by ground measurements. A biogenic isoprene emission model used to compare flux measurements, ranging from leaf scale (10 cm2) to landscape scale (102 km2), indicated agreement to within ±25%, the uncertainty associated with these measurement techniques. Existing biogenic emission models use isoprene emission rate capacities that range from 14.7 to 70 μg C g−1 h−1 (leaf temperature of 30°C and photosynthetically active radiation of 1000 μmol m−2 s−1) for oak foliage. An isoprene emission rate capacity of 100 μg C g−1 h−1 for oaks in this region is more realistic and is recommended, based on these measurements. more...

Environ. Sci. Techno/. 1995, 29, 1468-1 479 Introduction Tracer -Methods To Measure Downloaded by UNIV OF CALIFORNIA IRVINE on August 26, 2015 | http://pubs.acs.org Publication Date: June 1, 1995 | doi: 10.1021/es00006a007 Gas Faciliies and U h n Areas BRIAN K. LAMB,*,’ J. BARRY MCMANUS,* JOANNE H. SHORTER,* CHARLES E . KOLB,* BYARD MOSHER,$ R O B E R T C . HARRISS,§ EUGENE ALLWINE,’ DENISE BLAHA,$ T O U C H E H O W A R D , ” A L E X GUENTHER,l ROBERT A. LOTT,A ROBERT SIVERSON,’ HAL WESTBERG,’ AND PAT ZIMMERMAN- Laboratory for Atmospheric Research, Department of Civil & Environmental Engineering, Washington State University, Pullman, WA 99164-2910, Center for Chemical and Environmental Physics, Aerodyne Research, Inc., Billerica, Massachusetts 01821, Institute for the Study of Earth, Oceans and Space, University of New Hampshire, Durham, New Hampshire 03824, Indaco Air Quality Services, Inc., Pullman, Washington 99163, National Center for Atmospheric Research, Boulder, Colorado 80303, and Gas Research Institute, Chicago, Illinois 60631 -3562 A new, integrated methodologyto locate and measure methane emissions from natural gas systems has been developed. Atmospheric methane sources are identified by elevated ambient CH4 concentrations measured with a mobile laser-based methane analyzer. The total methane emission rate from a source is obtained by simulating the source with a sulfur hexafluoride (SFS) tracer gas release and by measuring methane and tracer concentrations along downwind sampling paths using mobile, real-time analyzers. Combustion sources of methane are dis- tinguished from noncombustion sources by concur- rent ambient carbon dioxide measurements. Three variations on the tracer ratio method are described for application to (1) small underground vaults, (2) above- ground natural gas facilities, and (3) diffuse methane emissions from an entire town. Results from controlled releases and from replicate tests demonstrate thatthe tracer ratio approach can yield total emission rates to within approximately &15%. The estimated accuracy of emission estimates for urban areas with a variety of diffuse emissions is &50%. Methane (CH4) has been a contributor to the increasing burden of greenhouse gases in the earth’s atmosphere for more than a century (1). Faced with significant risks identified in scenarios of increasing greenhouse gas con- centrations, many countries are developing plans to reduce emissions. However, uncertainties in specific source emission rates for CH4 and other non-COz greenhouse gases currently limit the quantitative risk-benefit analysis needed to answer key policy questions related to the socioeconomic impacts of large-scale mitigation actions (2, 3 ) . Initial attempts to estimate CH4 losses to the atmosphere from natural gas production and use assumed that emis- sions could be approximated by industry reports of “unac- counted for” gas (e.g., ref 4). Unaccounted for gas, defined as the difference between the amount of natural gas metered into a system and the amount of gas metered out of a system, does not account for gas losses from wells to the processing plant, gas used as fuel in facilities, theft of gas, meter inaccuracies, and differences in accounting procedures between companies (4,5). Thus, the unaccounted for gas estimates cannot unambiguously be considered an upper or lower bound on emissions (5). Extrapolation of engi- neering estimates or data obtained from component by component sniffing methods also leads to large uncertain- ties in estimated emissions. In the United Kingdom, the British Gas Company estimates CH4 emissions from gas distribution system components to be less than 1% of throughput, while others estimate losses as high as 11% of gas throughput (6). A recent estimate of CH4 leakage from the natural gas system in the former Soviet Union, which was characterized as “tentative and highly conditional” suggested a range of total losses from 3.3% to 7% of gas production ( 7 ) . The U.S. Environmental Protection Agency (EPA) and the Gas Research Institute (GRI) have recently sponsored an integrated field measurement and analysis program to better define methane emissions from the U.S. natural gas system. Drawing on initial measurements using some of the techniques reported here as weil as engineering estimates, GRI has developed a preliminary estimate of methane emissions from the gas industry that equals approximately 1.5 i 0.5% of annual throughput (8). In the case of CH4 emissions due to the use of natural gas, there is an added motivation for correctly prescribing the methane source strength. Since natural gas typically produces 32-45% less COz per unit of thermal output compared to coal and 30% less compared to fuel oil, switching from coal and fuel oil to natural gas has the potential to reduce carbon dioxide emissions and reduce global warming (5). However, CH4 is a more potent greenhouse gas than CO2 on a molecule for molecule basis (9- 1 I). As a result, increasing the usage of natural gas may * To whom correspondence should be addressed: e-mail address: blamb@wsu.edu. + Washington State University. Aerodyne Research, Inc. 5 University of New Hampshire. I’ Indaco Air Quality Services, Inc. National Center for Atmospheric Research. A Gas Research Institute. 1468 ENVIRONMENTAL SCIENCE &TECHNOLOGY / VOL. 29, NO. 6, 1995 0013-936)(/95/0929-1468$09.00/0 @ 1995 American Chemical Society more...

We recently have conducted measurements of distributions and fluxes of methane in several small towns in the U.S. These measurements are made with a real-time methane instrument recently developed at Aerodyne Research. This instrument is based on absorption of infrared light from a Zeeman-broadened HeNe laser operating at 3.39 micrometers . A non-uniform magnetic field applied to the laser plasma results in a nearly flat gain profile, which allows piezoelectric tuning of the laser on and off a methane line. Long path (47 m) absorption occurs in a multipass cell. The instrument has a noise level of 5 ppbv (rms, 1 sec.) and a gas sampling time of 6 sec. The instrument is mounted in a van with a suite of other real-time instruments (CO2 and SF6) which can function while moving at roadway speeds. We map the methane distribution in towns, identify the primary methane sources, and measure fluxes with tracer methods. The simultaneous measurement of CO2 with a commercially available NDIR device is useful in identifying some sources of methane. An SF6 instrument (electron capture) allows precise location and measurement of tracer plumes during flux measurement experiments.© (1993) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only. more...