Search

ω-Transaminases (ω-TA) are attractive biocatalysts for the production of chiral amines from prochiral ketones via asymmetric synthesis. However, the substrate scope of ω-TAs is usually limited due to steric hindrance at the active site pockets. We explored a protein engineering strategy using computational design to expand the substrate scope of an (S)-selective ω-TA from Pseudomonas jessenii (PjTA-R6) toward the production of bulky amines. PjTA-R6 is attractive for use in applied biocatalysis due to its thermostability, tolerance to organic solvents, and acceptance of high concentrations of isopropylamine as amino donor. PjTA-R6 showed no detectable activity for the synthesis of six bicyclic or bulky amines targeted in this study. Six small libraries composed of 7-18 variants each were separately designed via computational methods and tested in the laboratory for ketone to amine conversion. In each library, the vast majority of the variants displayed the desired activity, and of the 40 different designs, 38 produced the target amine in good yield with >99% enantiomeric excess. This shows that the substrate scope and enantioselectivity of PjTA mutants could be predicted in silico with high accuracy. The single mutant W58G showed the best performance in the synthesis of five structurally similar bulky amines containing the indan and tetralin moieties. The best variant for the other bulky amine, 1-phenylbutylamine, was the triple mutant W58M + F86L + R417L, indicating that Trp58 is a key residue in the large binding pocket for PjTA-R6 redesign. Crystal structures of the two best variants confirmed the computationally predicted structures. The results show that computational design can be an efficient approach to rapidly expand the substrate scope of ω-TAs to produce enantiopure bulky amines.

Caprolactamase is the first enzyme in the caprolactam degradation pathway of Pseudomonas jessenii. It is composed of two subunits (CapA and CapB) and sequence-related to other ATP-dependent enzymes involved in lactam hydrolysis, like 5-oxoprolinases and hydantoinases. Low sequence similarity also exists with ATP-dependent acetone- and acetophenone carboxylases. The caprolactamase was produced in E. coli, isolated by His-tag affinity chromatography, and subjected to functional and structural studies. Activity towards caprolactam required ATP and was dependent on the presence of bicarbonate in the assay buffer. The hydrolysis product was identified as 6-aminocaproic acid (6-ACA). Quantum mechanical modeling indicated that the hydrolysis of caprolactam was highly disfavored (ΔG0 ' = 23 kJ/mol), which explained the ATP dependence. A crystal structure showed that the enzyme exists as an (αβ)2 tetramer and revealed an ATP-binding site in CapA and a Zn-coordinating site in CapB. Mutations in the ATP-binding site of CapA (D11A and D295A) significantly reduced product formation. Mutants with substitutions in the metal binding site of CapB (D41A, H99A, D101A and H124A) were inactive and less thermostable than the wild-type enzyme. These residues proved to be essential for activity and on basis of the experimental findings we propose possible mechanisms for ATP-dependent lactam hydrolysis. This article is protected by copyright. All rights reserved.

Graphical abstract, Omniligase-1 is a broadly applicable enzyme for peptide bond formation between an activated acyl donor peptide and a non-protected acyl acceptor peptide. The enzyme is derived from an earlier subtilisin variant called peptiligase by several rounds of protein engineering aimed at increasing synthetic yields and substrate range. To examine the contribution of individual mutations on S/H ratio and substrate scope in peptide synthesis, we selected peptiligase variant M222P/L217H as a starting enzyme and introduced successive mutations. Mutation A225N in the S1′ pocket and F189W of the S2′ pocket increased the synthesis to hydrolysis (S/H) ratio and overall coupling efficiency, whereas the I107V mutation was added to S4 pocket to increase the reaction rate. The final omniligase variants appeared to have a very broad substrate range, coupling more than 250 peptides in a 400-member library of acyl acceptors, as indicated by a high-throughput FRET assay. Crystal structures and computational modelling could rationalize the exceptional properties of omniligase-1 in peptide synthesis

CYP154C5 from Nocardia farcinica is a P450 monooxygenase able to hydroxylate a range of steroids with high regio‐ and stereoselectivity at the 16α‐position. Using protein engineering and substrate modifications based on the crystal structure of CYP154C5, an altered regioselectivity of the enzyme in steroid hydroxylation had been achieved. Thus, conversion of progesterone by mutant CYP154C5 F92A resulted in formation of the corresponding 21‐hydroxylated product 11‐deoxycorticosterone in addition to 16α‐hydroxylation. Using MD simulation, this altered regioselectivity appeared to result from an alternative binding mode of the steroid in the active site of mutant F92A. MD simulation further suggested that the entrance of water to the active site caused higher uncoupling in this mutant. Moreover, exclusive 15α‐hydroxylation was observed for wild‐type CYP154C5 in the conversion of 5α‐androstan‐3‐one, lacking an oxy‐functional group at C17. Overall, our data give valuable insight into the structure–function relationship of this cytochrome P450 monooxygenase for steroid hydroxylation., Changes in selectivity: Using substrate and protein engineering based on key residues and functional groups, the regioselectivity of the bacterial cytochrome P450 monooxygenase CYP154C5 in the hydroxylation of different steroids was altered. Apart from 16α‐hydroxylation, steroid products containing hydroxy groups in 15α and 21 position were formed.

Background Efficient bioethanol production from hemicellulose feedstocks by Saccharomyces cerevisiae requires xylose utilization. Whereas S. cerevisiae does not metabolize xylose, engineered strains that express xylose isomerase can metabolize xylose by converting it to xylulose. For this, the type II xylose isomerase from Piromyces (PirXI) is used but the in vivo activity is rather low and very high levels of the enzyme are needed for xylose metabolism. In this study, we explore the use of protein engineering and in vivo selection to improve the performance of PirXI. Recently solved crystal structures were used to focus mutagenesis efforts. Results We constructed focused mutant libraries of Piromyces xylose isomerase by substitution of second shell residues around the substrate- and metal-binding sites. Following library transfer to S. cerevisiae and selection for enhanced xylose-supported growth under aerobic and anaerobic conditions, two novel xylose isomerase mutants were obtained, which were purified and subjected to biochemical and structural analysis. Apart from a small difference in response to metal availability, neither the new mutants nor mutants described earlier showed significant changes in catalytic performance under various in vitro assay conditions. Yet, in vivo performance was clearly improved. The enzymes appeared to function suboptimally in vivo due to enzyme loading with calcium, which gives poor xylose conversion kinetics. The results show that better in vivo enzyme performance is poorly reflected in kinetic parameters for xylose isomerization determined in vitro with a single type of added metal. Conclusion This study shows that in vivo selection can identify xylose isomerase mutants with only minor changes in catalytic properties measured under standard conditions. Metal loading of xylose isomerase expressed in yeast is suboptimal and strongly influences kinetic properties. Metal uptake, distribution and binding to xylose isomerase are highly relevant for rapid xylose conversion and may be an important target for optimizing yeast xylose metabolism.

α-Amylase from Bacillus paralicheniformis (BliAmy), belonging to GH13_5 subfamily of glycoside hydrolases, was proven to be a highly efficient raw starch digesting enzyme. The ability of some α-amylases to hydrolyze raw starch is related to the existence of surface binding sites (SBSs) for polysaccharides that can be distant from the active site. Crystallographic studies performed on BliAmy in the apo form and of enzyme bound with different oligosaccharides and oligosaccharide precursors revealed binding of these ligands to one SBS with two amino acids F257 and Y358 mainly involved in complex formation. The role of this SBS in starch binding and degradation was probed by designing enzyme variants mutated in this region (F257A and Y358A). Kinetic studies with different substrates show that starch binding through the SBS is disrupted in the mutants and that F257 and Y358 contributed cumulatively to binding and hydrolysis. Mutation of both sites (F257A/Y358A) resulted in a 5-fold lower efficacy with raw starch as substrate and at least 5.5-fold weaker binding compared to the wild type BliAmy, suggesting that the ability of BliAmy to hydrolyze raw starch with high efficiency is related to the level of its adsorption onto starch granules. This is the peer-reviewed version of the article: N. Božić, H.J. Rozeboom, N. Lončar, et al., Characterization of the starch surface binding site on Bacillus paralicheniformis α-amylase, International Journal of Biological Macromolecules, 2020, 165, A, 1529-1539, DOI: [https://doi.org/10.1016/j.ijbiomac.2020.10.025] Published version: [https://cer.ihtm.bg.ac.rs/handle/123456789/3728]

The use of enzymes in preparative biocatalysis often requires tailoring enzyme selectivity by protein engineering. Herein we explore the use of computational library design and molecular dynamics simulations to create variants of limonene epoxide hydrolase that produce enantiomeric diols from meso‐epoxides. Three substrates of different sizes were targeted: cis‐2,3‐butene oxide, cyclopentene oxide, and cis‐stilbene oxide. Most of the 28 designs tested were active and showed the predicted enantioselectivity. Excellent enantioselectivities were obtained for the bulky substrate cis‐stilbene oxide, and enantiocomplementary mutants produced (S,S)‐ and (R,R)‐stilbene diol with >97 % enantiomeric excess. An (R,R)‐selective mutant was used to prepare (R,R)‐stilbene diol with high enantiopurity (98 % conversion into diol, >99 % ee). Some variants displayed higher catalytic rates (k cat) than the original enzyme, but in most cases K M values increased as well. The results demonstrate the feasibility of computational design and screening to engineer enantioselective epoxide hydrolase variants with very limited laboratory screening., Overcoming bottlenecks: This paper describes the use of computational design to obtain limonene epoxide hydrolase variants that show regioselective attack of water and thereby form enantiomeric diols from meso‐epoxides. Most of the 28 designs that were examined in the laboratory carried multiple mutations, retained stability, and gave diols with the predicted chirality.

The synthesis of thymosin-α1, an acetylated 28 amino acid long therapeutic peptide, via conventional chemical methods is exceptionally challenging. The enzymatic coupling of unprotected peptide segments in water offers great potential for a more efficient synthesis of peptides that are difficult to synthesize. Based on the design of a highly engineered peptide ligase, we developed a fully convergent chemo-enzymatic peptide synthesis (CEPS) process for the production of thymosin-α1via a 14-mer + 14-mer segment condensation strategy. Using structure-inspired enzyme engineering, the thiol-subtilisin variant peptiligase was tailored to recognize the respective 14-mer thymosin-α1 segments in order to create a clearly improved biocatalyst, termed thymoligase. Thymoligase catalyzes peptide bond formation between both segments with a very high efficiency (>94% yield) and is expected to be well applicable to many other ligations in which residues with similar characteristics (e.g. Arg and Glu) are present in the respective positions P1 and P1′. The crystal structure of thymoligase was determined and shown to be in good agreement with the model used for the engineering studies. The combination of the solid phase peptide synthesis (SPPS) of the 14-mer segments and their thymoligase-catalyzed ligation on a gram scale resulted in a significantly increased, two-fold higher overall yield (55%) of thymosin-α1 compared to those typical of existing industrial processes.

The substrate profile of peptiligase, a stable enzyme designed for peptide ligation in aqueous environments, was mapped using six different peptide libraries. The most discriminating substrate binding pocket proved to be the first nucleophile binding subsite (S1), which is crucial for the peptide ligation yield. Two important amino acids shaping the S1 pocket are M213 and L208. A site-saturation library of the M213 position yielded two variants with a significantly broadened substrate profile, i.e., M213G and M213P. Next, examination of two libraries with M213G+L208X and M213P+L208X (with X being any proteinogenic amino acid) resulted in a toolbox of enzymes which can accommodate any proteinogenic amino acid in the S1 pocket, except proline. The applicability of a particular enzyme variant in chemoenzymatic peptide synthesis was demonstrated by coupling at the gram scale of two peptide segments to yield exenatide, a 39-mer therapeutic peptide used in the treatment of diabetes type II. The overall yield of 43% is at least 2-fold higher than yields reported for conventional syntheses of exenatide by full solid-phase peptide synthesis; large-scale production costs are expected to be significantly reduced if the enzymatic coupling process is employed to manufacture this peptide.

The biodegradation of the nylon-6 precursor caprolactam by a strain of Pseudomonas jessenii proceeds via ATP-dependent hydrolytic ring-opening to 6-aminohexanoate. This non-natural ω-amino acid is converted to 6-oxohexanoic acid by an aminotransferase (PjAT) belonging to the fold type I PLP enzymes. To understand the structural basis of 6-aminohexanoatate conversion, we solved different crystal structures and determined the substrate scope with a range of aliphatic and aromatic amines. Comparison with the homologous aminotransferases from Chromobacterium violaceum (CvAT) and Vibrio fluvialis (VfAT) showed that the PjAT enzyme has the lowest KM values (highest affinity) and highest specificity constant (kcat /KM ) with the caprolactam degradation intermediates 6-aminohexanoate and 6-oxohexanoic acid, in accordance with its proposed in vivo function. Five distinct three-dimensional structures of PjAT were solved by protein crystallography. The structure of the aldimine intermediate formed from 6-aminohexanoate and the PLP cofactor revealed the presence of a narrow hydrophobic substrate-binding tunnel leading to the cofactor and covered by a flexible arginine, which explains the high activity and selectivity of the PjAT with 6-aminohexanoate. The results suggest that the degradation pathway for caprolactam has recruited an aminotransferase that is well adapted to 6-aminohexanoate degradation. This article is protected by copyright. All rights reserved.

Disulfide-rich macrocyclic peptides-cyclotides, for example-represent a promising class of molecules with potential therapeutic use. Despite their potential their efficient synthesis at large scale still represents a major challenge. Here we report new chemoenzymatic strategies using peptide ligase variants-inter alia, omniligase-1-for the efficient and scalable one-pot cyclization and folding of the native cyclotides MCoTI-II, kalata B1 and variants thereof, as well as of the theta-defensin RTD-1. The synthesis of the kB1 variant T20K was successfully demonstrated at multi-gram scale. The existence of several ligation sites for each macrocycle makes this approach highly flexible and facilitates both the larger-scale manufacture and the engineering of bioactive, grafted cyclotide variants, therefore clearly offering a valuable and powerful extension of the existing toolbox of enzymes for peptide head-to-tail cyclization.

We constructed an enzymatic network composed of three different enzymes for the synthesis of valuable ether amines. The enzymatic reactions are interconnected to catalyze the oxidation and subsequent transamination of the substrate and to provide cofactor recycling. This allows production of the desired ether amines from the corresponding ether alcohols with inorganic ammonium as the only additional substrate. To examine conversion, individual and overall reaction equilibria were established. Using these data, it was found that the experimentally observed conversions of up to 60% observed for reactions containing 10 mM alcohol and up to 280 mM ammonia corresponded well to predicted conversions. The results indicate that efficient amination can be driven by high concentrations of ammonia and may require improving enzyme robustness for scale-up. Biotechnol. Bioeng. 2016;113: 1853-1861. © 2016 Wiley Periodicals, Inc.

Irritable bowel syndrome (IBS) is a functional gastrointestinal disorder chronic in nature and characterized predominantly by abdominal pain or discomfort associated with altered bowel habits, diagnosis requires characteristic symptoms during the last 3 months and onset ≥6 months ago. Symptom-based approaches for functional bloating, constipation and diarrhea are best utilised to identify IBS. IBS with constipation exerts significant impairment on work productivity by hampering quality of life. Inadequate relief by existing modalities, persistent hard stools and visceral abdominal pain demanded further clinical research. Tenanapor a novel molecule acts locally on gastrointestinal sodium/hydrogen exchanger isoform 3 (NHE3), an antiporter a counter transporter and exert antinociceptive effects on visceral sensation thereby decreases the frequency of abdominal pain. Action on NHE3 receptors located on small intestine and colon’s apical surface reduces the absorption of sodium and phosphate, with minimal systemic exposure. NHE3 Inhibition induced sodium absorption results in increase in water secretion into intestinal lumen resultant an accelerated intestinal transit time and softer stool consistency. Most common adverse reactions (≥2%) are diarrhea, abdominal distension, flatulence and dizziness. The drug is metabolised mainly by CYP3A4/5 and excreted in feaces (70%) and urine (7%). Tenapanor’s minimal systemic absorption is likely to be associated with a relatively inert safety and tolerability profile. Based on positive results from the phase III T3MPO trial program, tenapanor demonstrated promising results for IBS-C management and received US Food and Drug Administration approval as IBSRELA @ Ardelyx Pharma in September 2019 and augment existing modalities for management of IBS-C.

Organic and inorganic chlorine compounds are formed by a broad range of natural geochemical, photochemical and biological processes. In addition, chlorine compounds are produced in large quantities for industrial, agricultural and pharmaceutical purposes, which has led to widespread environmental pollution. Abiotic transformations and microbial metabolism of inorganic and organic chlorine compounds combined with human activities constitute the chlorine cycle on Earth. Naturally occurring organochlorines compounds are synthesized and transformed by diverse groups of (micro)organisms in the presence or absence of oxygen. In turn, anthropogenic chlorine contaminants may be degraded under natural or stimulated conditions. Here, we review phylogeny, biochemistry and ecology of microorganisms mediating chlorination and dechlorination processes. In addition, the co-occurrence and potential interdependency of catabolic and anabolic transformations of natural and synthetic chlorine compounds are discussed for selected microorganisms and particular ecosystems., The authors thank METAEXPLORE, funded by the European Union Seventh Framework Program (Grant No. 222625), BEBASIC-FES funds from the Dutch Ministry of Economic Affairs (Projects F07.001.05 and F08.004.01), Shell Global Solutions International BV, the ERC Advanced grant “Novel Anaerobes” (Project 323009), the SIAM Gravitation grant “Microbes for Health and the Environment” (Project 024.002.002) of the Netherlands Ministry of Education, Culture and Science, and the Netherlands Science Foundation (NWO) for funding., info:eu-repo/semantics/publishedVersion

Biocatalytic dealkylation of aryl methyl ethers is an attractive reaction for valorization of lignin components, as well as for deprotection of hydroxy functionalities in synthetic chemistry. We explored the demethylation of various aryl methyl ethers by using an oxidative demethylase from Pseudomonas sp. HR199. The Rieske monooxygenase VanA and its partner electron transfer protein VanB were recombinantly coexpressed in Escherichia coli and they constituted at least 25 % of the total protein content. Enzymatic transformations showed that VanB accepts NADH and NADPH as electron donors. The VanA-VanB system demethylates a number of aromatic substrates, the presence of a carboxylic acid moiety is essential, and the catalysis occurs selectively at the meta position to this carboxylic acid in the aromatic ring. The reaction is inhibited by the by-product formaldehyde. Therefore, we tested three different cascade/tandem reactions for cofactor regeneration and formaldehyde elimination; in particular, conversion was improved by addition of formaldehyde dehydrogenase and formate dehydrogenase. Finally, the biocatalyst was applied for the preparation of protocatechuic acid from vanillic acid, giving a 77 % yield of the desired product. The described reaction may find application in the conversion of lignin components into diverse hydroxyaromatic building blocks and generally offers potential for new, mild methods for efficient unmasking of phenols.

Some bacterial cultures are capable of growth on caprolactam as sole carbon and nitrogen source, but the enzymes of the catabolic pathway have not been described. We isolated a caprolactam-degrading strain of Pseudomonas jessenii from soil and identified proteins and genes putatively involved in caprolactam metabolism using quantitative mass spectrometry-based proteomics. This led to the discovery of a caprolactamase and an aminotransferase that are involved in the initial steps of caprolactam conversion. Additionally, various proteins were identified that likely are involved in later steps of the pathway. The caprolactamase consists of two subunits and demonstrated high sequence identity to the 5-oxoprolinases. Escherichia coli cells expressing this caprolactamase did not convert 5-oxoproline but were able to hydrolyze caprolactam to form 6-aminocaproic acid in an ATP-dependent manner. Characterization of the aminotransferase revealed that the enzyme deaminates 6-aminocaproic acid to produce 6-oxohexanoate with pyruvate as amino acceptor. The amino acid sequence of the aminotransferase showed high similarity to subgroup II ω-aminotransferases of the PLP-fold type I proteins. Finally, analyses of the genome sequence revealed the presence of a caprolactam catabolism gene cluster comprising a set of genes involved in the conversion of caprolactam to adipate. Electronic supplementary material The online version of this article (10.1007/s00253-018-9073-7) contains supplementary material, which is available to authorized users.

An efficient dynamic kinetic resolution protocol using a single enzyme is described. Both the kinetic resolution and substrate racemization are catalyzed by halohydrin dehalogenase from Agrobacterium radiobacter AD1 (HheC). The HheC-catalyzed reaction of epibromohydrin and 2-bromomethyl-2-methyloxirane with sodium cyanate afforded 5-substituted 2-oxazolidinones in high yields (97% and 87%) and high optical purity (89% and > 99% ee) in the presence of catalytic amounts of bromide ion. These compounds are valuable building blocks with diverse synthetic applications.

Protein engineering aimed at enhancing enzyme stability is increasingly supported by computational methods for calculation of mutant folding energies and for the design of disulfide bonds. To examine the accuracy of mutant structure predictions underlying these computational methods, crystal structures of thermostable limonene epoxide hydrolase variants obtained by computational library design were determined. Four different predicted effects indeed contributed to the obtained stabilization: (i) enhanced interactions between a flexible loop close to the N-terminus and the rest of the protein; (ii) improved interactions at the dimer interface; (iii) removal of unsatisfied hydrogen bonding groups; and (iv) introduction of additional positively charged groups at the surface. The structures of an eightfold and an elevenfold mutant showed that most mutations introduced the intended stabilizing interactions, and side-chain conformations were correctly predicted for 72-88% of the point mutations. However, mutations that introduced a disulfide bond in a flexible region had a larger influence on the backbone conformation than predicted. The enzyme active sites were unaltered, in agreement with the observed preservation of catalytic activities. The structures also revealed how a c-Myc tag, which was introduced for facile detection and purification, can reduce access to the active site and thereby lower the catalytic activity. Finally, sequence analysis showed that comprehensive mutant energy calculations discovered stabilizing mutations that are not proposed by the consensus or B-FIT methods. This article is protected by copyright. All rights reserved.

Macitentan is an orphan drug for the treatment of pulmonary arterial hypertension (PAH). Endothelin-1 (ET-1) plays a critical role of pathophysiology of PAH. Macitentan, a new dual endothelin receptor antagonist, has reportedly improved prognosis of PAH patients by delaying the progression of disease. It prevents the binding of ET-1 to both endothelin A (ETA) and endothelin B (ETB) receptors. Macitentan displays higher efficacy, lesser adverse effects and drug interactions. It has completed phase III trials in 2012 for treatment of PAH and has been tried for ischemic digital ulcers in systemic sclerosis, recurrent glioblastoma and combination with chemotherapeutic agents against various cancers. Safety data for macitentan were obtained primarily from a placebo-controlled clinical study in 742 patients with PAH. The Food and Drug Administration (FDA) approved the drug on 13 October 2013. It is an important addition to long-term treatment of PAH.

The cyanide-mediated ring opening of epoxides catalyzed by halohydrin dehalogenases yields β-hydroxynitriles that are of high interest for synthetic chemistry. The best studied halohydrin dehalogenase to date is the enzyme from Agrobacterium radiobacter, but this enzyme (HheC) exhibits only low cyanolysis activities. Sequence comparison between a pair of related halohydrin dehalogenases from Corynebacterium and Mycobacterium suggested that substitution of a threonine that interacts with the active site might be responsible for the higher cyanolytic activity of the former enzyme. Here we report that a variant of HheC in which this substitution (T134A) is adopted displays an up to 11-fold higher activity in cyanide-mediated epoxide ring-opening. The mutation causes removal of the hydrogen bond between residue 134 and the side chain O of the active site serine 132, which donates a hydrogen bond to the substrate oxygen. The mutation also increases dehalogenase rates with various substrates. Structural analysis revealed that the anion-binding site of the mutant enzyme remained unaltered, showing that the enhanced activity is due to altered interactions with the substrate oxygen rather than changes in the nucleophile binding site.

A key problem in the engineering of pathways for the production of pharmaceutical compounds is the limited diversity of biosynthetic enzymes that restricts the attainability of suitable traits such as less harmful by-products, enhanced expression features or different cofactor requirements. A promising synthetic biology approach is to redesign the biosynthetic pathway by replacing the native enzymes by heterologous proteins from unrelated pathways. In this study, we applied this method to effectively re-engineer the biosynthesis of hydroxyphenylglycine (HPG), a building block for the calcium dependent antibiotic of Streptomyces coelicolor, a non-ribosomal peptide. A key step in HPG biosynthesis is the conversion of 4-hydroxymandelate to 4-hydroxyphenylglyoxylate, catalyzed by hydroxymandelate oxidase (HmO), with concomitant generation of H2O2. The same reaction can also be catalyzed by O2-independent mandelate dehydrogenase (MdlB), which is a catabolic enzyme involved in bacterial mandelate utilization. In this work, we engineered alternative HPG biosynthetic pathways by replacing the native HmO in S. coelicolor by both heterologous oxidases and MdlB dehydrogenases from various sources and confirmed the restoration of calcium-dependent antibiotic biosynthesis by biological and UHPLC-MS analysis. The alternative enzymes were isolated and kinetically characterized, confirming their divergent substrate specificities and catalytic mechanisms. These results demonstrate that heterologous enzymes with different physiological contexts can be used in a Streptomyces hosts to provide an expanded library of enzymatic reactions for a synthetic biology approach. This study thus broadens the options for the engineering of antibiotic production by using enzymes with different catalytic and structural features.

Opioid-induced constipation (OIC) is one of the most troublesome and the most common effects of opioid use leading to deterioration in quality of life of the patients and also has potentially deleterious repercussions on adherence and compliance to opioid therapy. With the current guidelines advocating liberal use of opioids by physicians even for non-cancer chronic pain, the situation is further complicated as these individuals are not undergoing palliative care and hence there cannot be any justification to subject these patients to the severe constipation brought on by opioid therapy which is no less debilitating than the chronic pain. The aim in these patients is to prevent the opioid-induced constipation but at the same time allow the analgesic activity of opioids. Many drugs have been used with limited success but the most specific among them were the peripherally acting mu opioid receptor antagonists (PAMORA). Methylnaltrexone and alvimopan were the early drugs in this group but were not approved for oral use in OIC. However naloxegol, the latest PAMORA has been very recently approved as the first oral drug for OIC. This article gives an overview of OIC, its current management and more specifically the development and approval of naloxegol, including pharmacokinetics, details of various clinical trials, adverse effects and its current status for the management of OIC.

Xylose isomerase from Piromyces sp. E2 (PirXI) can be used to equip Saccharomyces cerevisiae with the capacity to ferment xylose to ethanol. The biochemical properties and structure of the enzyme have not been described even though its metal content, catalytic parameters, and expression level are critical for rapid xylose utilization. We have isolated the enzyme after high-level expression in Escherichia coli, analyzed the metal dependence of its catalytic properties, and determined 12 crystal structures in the presence of different metals, substrates, and substrate analogues. The activity assays revealed that various bivalent metals can activate PirXI for xylose isomerization. Among these metals, Mn2+ is the most favorable for catalytic activity. Furthermore, the enzyme shows the highest affinity for Mn2+, which was established by measuring the activation constants (Kact) for different metals. Metal analysis of the purified enzyme showed that in vivo the enzyme binds a mixture of metals that is determined by metal availability as well as affinity, indicating that the native metal composition can influence activity. The crystal structures show the presence of an active site similar to that of other xylose isomerases, with a d-xylose binding site containing two tryptophans and a catalytic histidine, as well as two metal binding sites that are formed by carboxylate groups of conserved aspartates and glutamates. The binding positions and conformations of the metal-coordinating residues varied slightly for different metals, which is hypothesized to contribute to the observed metal dependence of the isomerase activity.

The genome sequence of Hyphomicrobium sp. strain GJ21, isolated in the Netherlands from samples of environments contaminated with halogenated pollutants and capable of using dichloromethane as its sole carbon and energy source, was determined.

Combined overexpression of xylulokinase, pentose-phosphate-pathway enzymes and a heterologous xylose isomerase (XI) is required but insufficient for anaerobic growth of Saccharomyces cerevisiae on d-xylose. Single-step Cas9-assisted implementation of these modifications yielded a yeast strain expressing Piromyces XI that showed fast aerobic growth on d-xylose. However, anaerobic growth required a 12-day adaptation period. Xylose-adapted cultures carried mutations in PMR1, encoding a Golgi Ca2+/Mn2+ ATPase. Deleting PMR1 in the parental XI-expressing strain enabled instantaneous anaerobic growth on d-xylose. In pmr1 strains, intracellular Mn2+ concentrations were much higher than in the parental strain. XI activity assays in cell extracts and reconstitution experiments with purified XI apoenzyme showed superior enzyme kinetics with Mn2+ relative to other divalent metal ions. This study indicates engineering of metal homeostasis as a relevant approach for optimization of metabolic pathways involving metal-dependent enzymes. Specifically, it identifies metal interactions of heterologous XIs as an underexplored aspect of engineering xylose metabolism in yeast.

Phenylalanine-2,3-aminomutase (PAM) from Taxus chinensis, a 4-methylidene-imidazole-5-one (MIO)-dependent enzyme, catalyzes the reversible conversion of (S)-alpha-phenylalanine into (R)-beta-phenylalanine via trans-cinnamic acid. The enzyme also catalyzes the direct addition of ammonia to trans-cinnamic acid, a reaction that can be used for the preparation of beta-amino acids, which occur as frequent constituents of bioactive compounds. Different hypotheses have been formulated to explain the stereochemistry of the PAM-catalyzed reaction, but structural evidence for these hypotheses is lacking. Furthermore, it remains unclear how the PAM MIO group is formed from the three-amino acid (A-S-G) sequence motif. For these reasons, we elucidated PAM three-dimensional (3D) structures with a bound (R)-beta-phenylalanine analogue and with bound trans-cinnamic acid. In addition, 3D structures of the (inactive) Y322A and N231A mutants of PAM were elucidated, which were found to be MIO-less. We conclude that the stereochemistry of the PAM-catalyzed reaction originates from the enzyme's ability to bind trans-cinnamic acid in two different orientations, with either the si,si face or the re,re face directed toward the MIO group, as evidenced by two distinct carboxylate binding modes. The results also suggest that the N231 side chain promotes MIO group formation by increasing the nucleophilicity of the G177 N atom through acidification of the amide proton.

Highlights • Cyclohexanone monooxygenase was stabilized by an in silico designed disulfide bond. • Stabilizing disulfide bonds were successfully designed based on a model structure. • The half-life at 30 °C was increased 12-fold for the mutant enzyme. • The apparent melting point was increased by 6 °C for the mutant enzyme. • The most stabilizing disulfide bond spans only one residue., Enzyme stability is an important parameter in biocatalytic applications, and there is a strong need for efficient methods to generate robust enzymes. We investigated whether stabilizing disulfide bonds can be computationally designed based on a model structure. In our approach, unlike in previous disulfide engineering studies, short bonds spanning only a few residues were included. We used cyclohexanone monooxygenase (CHMO), a Baeyer–Villiger monooxygenase (BVMO) from Acinetobacter sp. NCIMB9871 as the target enzyme. This enzyme has been the prototype BVMO for many biocatalytic studies even though it is notoriously labile. After creating a small library of mutant enzymes with introduced cysteine pairs and subsequent screening for improved thermostability, three stabilizing disulfide bonds were identified. The introduced disulfide bonds are all within 12 Å of each other, suggesting this particular region is critical for unfolding. This study shows that stabilizing disulfide bonds do not have to span many residues, as the most stabilizing disulfide bond, L323C–A325C, spans only one residue while it stabilizes the enzyme, as shown by a 6 °C increase in its apparent melting temperature.

Perampanel (2-[2-oxo-1-phenyl-5-pyridin-2-yl-1,2-dihydropyridin-3-yl] benzonitrile hydrate) is the latest antiepileptic drugs for treatment of refractory partial onset seizures. Perampanel inhibits α-amino-3-hydroxy-5-methyl-4-isoxazole-propionic acid (AMPA)-induced increase in intracellular Ca 2+ and selectively blocks AMPA receptor-mediated synaptic trans­mission, thus reducing neuronal excitation. Three Phase III multicenter, randomized, double-blind, placebo-controlled trials demonstrated the efficacy and good tolerability of perampanel as adjunctive treatment in patients with refractory partial-onset seizures. The drug is approved for use in the European Union and United States. The pharmacology of perampanel offers potential as more than just another new antiepileptic drug. This first-in-class drug will provide another option for practitioners of rational polytherapy.

Migraine is ranked by the World Health Organization as the world’s second leading cause of disability. The current state of knowledge suggests that migraine is a neuronal process involving activation and sensitization of the trigeminal nociceptors and the trigeminocervical complex, as well as cortical spreading depression and abnormal brainstem activity. The present non vascular etiological basis has opened a new horizon in the treatment of acute migraine targeting the trigeminal pathways. Lasmiditan, a highly selective 5-HT1F receptor agonist, acts on the trigeminal system without causing vasoconstriction because of its low affinity for 5-HT1B receptors. The compound belongs to a new class of drugs “ditans” and its mechanism of action is neuronal without evidence of vasoactive effects as seen with triptans. It lowers plasma protein extravasation decreasing the neurogenic inflammation of the dura and suppress neuronal firing within the trigeminal nucleus caudalis. Also, 5HT1F agonists have shown to decrease c-fos activity within trigeminal nucleus thereby reducing the level of synaptic activation. The onset of action of lasmiditan is fast, shows rapid absorption, oral bioavailability of 40% and linear pharmacokinetics. Most common adverse reactions seen are dizziness, paresthesia, somnolence, nausea, fatigue and lethargy with dizziness being the most recurrently reported adverse event. Clinical trials for lasmiditan to date have been positive, and maiden results suggest that lasmiditan may be a new safe and effective option for acute migraine treatment, especially for patients refractory to or unable to tolerate triptans, and/or for patients with pre-existing cardiovascular disease. With Eli Lilly and Co. having already applied for US FDA approval in Nov 2018, lasmiditan may soon be a new addition to the mounting armoury of drugs against migraine.

Peptide deformylases (PDFs) catalyze the removal of the formyl group from the N-terminal methionine residue in nascent polypeptide chains in prokaryotes. Its deformylation activity makes PDF an attractive candidate for the biocatalytic deprotection of formylated peptides that are used in chemoenzymatic peptide synthesis. For this application it is essential to use PDF preparations that are free of contamination by peptidases that can cleave internal peptide bonds. Therefore, different purification methods were attempted and an industrially applicable purification procedure was developed based on a single anion-exchange chromatography step of an engineered PDF variant that was equipped with an anionic octaglutamate tag. The deformylation activity and stability of the engineered enzyme were similar to those of the wild-type PDF. This purification method furnished a PDF preparation with a 1500-fold decreased level of contamination by amidases and peptidases as compared to cell-free extract. It was shown that the enzyme could be used for deprotection of a formylated dipeptide that was prepared by thermolysin-mediated coupling. (C) 2013 Elsevier Inc. All rights reserved.

An aminomutase, naturally catalyzing the interconversion of (S)--phenylalanine and (R)--phenylalanine, was converted into an ammonia lyase catalyzing the nonoxidative deamination of phenylalanine to cinnamic acid by a rational single-point mutation. It could be shown by crystal structures and kinetic data that the flexibility of the lid that covers the active site decides whether the enzyme acts as a lyase or a mutase. An Arg92Ser mutation destabilized the closed conformation of the lid structure and converted the mutase into a lyase that exhibited up to 44-fold increased reaction rates in the enantioselective deamination of (R)--phenylalanine. In addition, the amination rates of cinnamic acid yielding optically pure (S)-- and (R)--phenylalanine were doubled. The applicability of the mutant enzyme for kinetic resolution and asymmetric amination could be shown by biocatalysis on a preparative scale.

Ammonia lyases (AL) and aminomutases (AM) are emerging in green synthetic routes to chiral amines and an AL is being explored as an enzyme therapeutic for treating phenylketonuria and cancer. Although the restricted substrate range of the wild-type enzymes limits their widespread application, the non-reliance on external cofactors and direct functionalization of an olefinic bond make ammonia lyases attractive biocatalysts for use in the synthesis of natural and non-natural amino acids, including beta-amino acids. The approach of combining structure-guided enzyme engineering with efficient mutant library screening has extended the synthetic scope of these enzymes in recent years and has resolved important mechanistic issues for AMs and ALs, including those containing the MIO (4-methylideneimidazole-5-one) internal cofactor.

Enzymes are widely used for peptide synthesis, both for coupling and for terminal activation and modification. Broad-specificity proteases of different mechanistic classes can be used for C-terminal activation and peptide coupling reactions, whereas enzymes that recognize specific sequences are increasingly used for selective modification and tagging. Protein engineering can tailor hydrolases for improved synthesis, better reaction medium tolerance, and desired substrate selectivity. This chapter highlights properties of natural and engineered peptidases, amidases, and peptide transferases for chemoenzymatic peptide synthesis and terminal modification, with an emphasis on basic principles and innovations leading to new applications.

A Pseudomonas putida strain (MC4) that can utilize 2,3-dichloro-1-propanol (DCP) and several aliphatic haloacids and haloalcohols as sole carbon and energy source for growth was isolated from contaminated soil. Degradation of DCP was found to start with oxidation and concomitant dehalogenation catalyzed by a 72-kDa monomeric protein (DppA) that was isolated from cell lysate. The dppA gene was cloned from a cosmid library and appeared to encode a protein equipped with a signal peptide and that possessed high similarity to quinohemoprotein alcohol dehydrogenases (ADHs), particularly ADH IIB and ADH IIG from Pseudomonas putida HK. This novel dehalogenating dehydrogenase has a broad substrate range, encompassing a number of nonhalogenated alcohols and haloalcohols. With DCP, DppA exhibited a k cat of 17 s −1 . 1 H nuclear magnetic resonance experiments indicated that DCP oxidation by DppA in the presence of 2,6-dichlorophenolindophenol (DCPIP) and potassium ferricyanide [K 3 Fe(CN) 6 ] yielded 2-chloroacrolein, which was oxidized to 2-chloroacrylic acid.

Methylaspartate ammonia lyase (MAL; EC 4.3.1.2) catalyzes the reversible addition of ammonia to mesaconate to give (2S,3S)-3-methylaspartate and (2S,3R)-3-methylaspartate as products. MAL is of considerable biocatalytic interest because of its potential use for the asymmetric synthesis of substituted aspartic acids, which are important building blocks for synthetic enzymes, peptides, chemicals, and pharmaceuticals. Here, we have cloned the gene encoding MAL from the thermophilic bacterium Carboxydothermus hydrogenoformans Z-2901. The enzyme (named Ch-MAL) was overproduced in Escherichia coli and purified to homogeneity by immobilized metal affinity chromatography. Ch-MAL is a dimer in solution, consisting of two identical subunits (∼49 kDa each), and requires Mg2+ and K+ ions for maximum activity. The optimum pH and temperature for the deamination of (2S,3S)-3-methylaspartic acid are 9.0 and 70°C (kcat = 78 s−1 and Km = 16 mM). Heat inactivation assays showed that Ch-MAL is stable at 50°C for >4 h, which is the highest thermal stability observed among known MALs. Ch-MAL accepts fumarate, mesaconate, ethylfumarate, and propylfumarate as substrates in the ammonia addition reaction. The enzyme also processes methylamine, ethylamine, hydrazine, hydroxylamine, and methoxylamine as nucleophiles that can replace ammonia in the addition to mesaconate, resulting in the corresponding N-substituted methylaspartic acids with excellent diastereomeric excess (>98% de). This newly identified thermostable MAL appears to be a potentially attractive biocatalyst for the stereoselective synthesis of aspartic acid derivatives on large (industrial) scale. Electronic supplementary material The online version of this article (doi:10.1007/s00253-011-3615-6) contains supplementary material, which is available to authorized users.

By selective enrichment, we isolated a bacterium that can use β-phenylalanine as a sole nitrogen source. It was identified by 16S rRNA gene sequencing as a strain of Variovorax paradoxus . Enzyme assays revealed an aminotransferase activity. Partial genome sequencing and screening of a cosmid DNA library resulted in the identification of a 1,302-bp aminotransferase gene, which encodes a 46,416-Da protein. The gene was cloned and overexpressed in Escherichia coli . The recombinant enzyme was purified and showed a specific activity of 17.5 U mg −1 for ( S )-β-phenylalanine at 30°C and 33 U mg −1 at the optimum temperature of 55°C. The β-specific aminotransferase exhibits a broad substrate range, accepting ortho -, meta -, and para -substituted β-phenylalanine derivatives as amino donors and 2-oxoglutarate and pyruvate as amino acceptors. The enzyme is highly enantioselective toward ( S )-β-phenylalanine (enantioselectivity [E], >100) and derivatives thereof with different substituents on the phenyl ring, allowing the kinetic resolution of various racemic β-amino acids to yield ( R )-β-amino acids with >95% enantiomeric excess ( ee ). The crystal structures of the holoenzyme and of the enzyme in complex with the inhibitor 2-aminooxyacetate revealed structural similarity to the β-phenylalanine aminotransferase from Mesorhizobium sp. strain LUK. The crystal structure was used to rationalize the stereo- and regioselectivity of V. paradoxus aminotransferase and to define a sequence motif with which new aromatic β-amino acid-converting aminotransferases may be identified.

Coenzyme A ligases play an important role in metabolism by catalyzing the activation of carboxylic acids. In this study we describe the synthesis of aminoacyl-coenzyme As (CoAs) catalyzed by a CoA ligase from Penicillium chrysogenum. The enzyme accepted medium-chain length fatty acids as the best substrates, but the proteinogenic amino acids L-phenylalanine and L-tyrosine, as well as the non-proteinogenic amino acids D-phenylalanine, D-tyrosine and (R)- and (S)-beta-phenylalanine were also accepted. Of these amino acids, the highest activity was found for (R)-beta-phenylalanine, forming (R)-beta-phenylalanyl-CoA. Homology modeling suggested that alanine 312 is part of the active site cavity, and mutagenesis (A312G) yielded a variant that has an enhanced catalytic efficiency with beta-phenylalanines and D-alpha-phenylalanine. (C) 2011 Federation of European Biochemical Societies. Published by Elsevier B. V. All rights reserved.

A consortium of the newly isolated bacterial strains Arthrobacter sp. strain G1 and Ralstonia sp. strain H1 utilized 4-fluorocinnamic acid for growth under aerobic conditions. Strain G1 converted 4-fluorocinnamic acid into 4-fluorobenzoic acid and used the two-carbon side chain for growth, with some formation of 4-fluoroacetophenone as a dead-end side product. In the presence of strain H1, complete mineralization of 4-fluorocinnamic acid and release of fluoride were obtained. Degradation of 4-fluorocinnamic acid by strain G1 occurred through a β-oxidation mechanism and started with the formation of 4-fluorocinnamoyl-coenzyme A (CoA), as indicated by the presence of 4-fluorocinnamoyl-CoA ligase. Enzymes for further transformation were detected in cell extract, i.e., 4-fluorocinnamoyl-CoA hydratase, 4-fluorophenyl-β-hydroxy propionyl-CoA dehydrogenase, and 4-fluorophenyl-β-keto propionyl-CoA thiolase. Degradation of 4-fluorobenzoic acid by strain H1 proceeded via 4-fluorocatechol, which was converted by an ortho -cleavage pathway.

Arthrobacter sp. strain IF1 is able to grow on 4-fluorophenol (4-FP) as a sole source of carbon and energy. To clone the 4-FP degradation genes, DNA libraries were constructed and screened with a probe obtained by PCR using primers designed on the basis of conserved regions of aromatic two-component monooxygenases. Sequencing of positive clones yielded two gene clusters, each harboring a gene encoding a monooxygenase with high sequence similarity to the oxygenase component of 4-nitrophenol and 4-chlorophenol monooxygenase systems. Both these monooxygenase genes were differentially expressed during growth on 4-FP, as revealed by Northern blotting and reverse transcription-PCR. One cluster also contained a gene for a flavin reductase. The monooxygenase and reductase were purified from Escherichia coli cells expressing the corresponding genes, and together they catalyzed NADH-dependent hydroxylation and dehalogenation of 4-halophenols. The results indicate that strain IF1 transforms 4-FP to hydroquinone by a two-component monooxygenase system of which one component provides reduced flavin adenine dinucleotide at the expense of NADH and the other catalyzes para -hydroxylation of 4-FP and other 4-substituted phenols.

The phenylalanine aminomutase (PAM) from Taxus chinensis catalyses the conversion of alpha-phenylalanine to beta-phenylalanine, an important step in the biosynthesis of the N-benzoyl phenylisoserinoyl side-chain of the anticancer drug taxol. Mechanistic studies on PAM have suggested that (E)-cinnamic acid is an intermediate in the mutase reaction and that it can be released from the enzyme's active site. Here we describe a novel synthetic strategy that is based on the finding that ring-substituted (E)-cinnamic acids can serve as a substrate in PAM-catalysed ammonia addition reactions for the biocatalytic production of several important beta-amino acids. The enzyme has a broad substrate range and a high enantioselectivity with cinnamic acid derivatives; this allows the synthesis of several non-natural aromatic alpha- and beta-amino acids in excellent enantiomeric excess (ee > 99%). The internal 5-methylene-3,5-dihydroimidazol-4-one (1010) cofactor is essential for the PAM-catalysed amination reactions. The regioselectivity of amination reactions was influenced by the nature of the ring substituent.

Haloalkane dehalogenase (DhlA) hydrolyzes short-chain haloalkanes to produce the corresponding alcohols and halide ions. Release of the halide ion from the active-site cavity can proceed via a two-step and a three-step route, which both contain slow enzyme isomerization steps. Thermodynamic analysis of bromide binding and release showed that the slow unimolecular isomerization steps in the three-step bromide export route have considerably larger transition state enthalpies and entropies than those in the other route. This suggests that the three-step route involves different and perhaps larger conformational changes than the two-step export route. We propose that the three-step halide export route starts with conformational changes that result in a more open configuration of the active site from which the halide ion can readily escape. In addition, we suggest that the two-step route for halide release involves the transfer of the halide ion from the halide-binding site in the cavity to a binding site somewhere at the protein surface, where a so-called collision complex is formed in which the halide ion is only weakly bound. No large structural rearrangements an necessary for this latter process.

Enzymatic activation of PAA (phenylacetic acid) to phenylacetyl-CoA is an important step in the biosynthesis of the beta-lactam antibiotic penicillin G by the fungus Penicillium chrysogenum. CoA esters of PAA and POA (phenoxyacetic acid) act as acyl donors in the exchange of the aminoadipyl side chain of isopenicillin N to produce penicillin G or penicillin v. The phl gene, encoding a PCL (phenylacetrate-CoA ligase), was cloned in coli as a maltose-binding protein fusion and tile biochemical properties or the enzyme were characterized. The recombinant fusion protein converted PAA into pherlylacetyl-CoA in an ATP- and magnesium-dependent reaction. PCL Could also activate POA, but the catalytic efficiency of the enzyme was rather low with k(LAT/)K(m) values of 0.23 +/- 0.06 and 7.8 +/- 1.2 mM (1) . s (1) for PAA and POA respectively. Surprisingly, PCL was very efficient in catalysing the conversion of trans-cinnamic acids to the corresponding CoA thioesters {k(cat)/K(m) = (3.1 +/- 0.4) x 10(2) mM(-1) . s(-1) for trans-cinnamic acid]. Of all the substrates screened, medium-chain rally acids, which also occur as the side chains of the natural penicillins F, DF, H and K, were the best substrates for PCL. The high preference for fatty acids could be explained by a homology model of PCL that was constructed oil the basis Of sequence similarity with the Japanese firefly luciferase. The results suggest that PCL has evolved from a fatty-acid-activating ancestral enzyme that may have been involved in the beta-oxidation of fatty acids.

Phenylacetone monooxygenase (PAMO) from Thermobifida fusca is a FAD-containing Baeyer-Villiger monooxygenase (BVMO). To elucidate the mechanism of conversion of phenylacetone by PAMO, we have performed a detailed steady-state and pre-steady-state kinetic analysis. In the catalytic cycle ( k cat = 3.1 s (-1)), rapid binding of NADPH ( K d = 0.7 microM) is followed by a transfer of the 4( R)-hydride from NADPH to the FAD cofactor ( k red = 12 s (-1)). The reduced PAMO is rapidly oxygenated by molecular oxygen ( k ox = 870 mM (-1) s (-1)), yielding a C4a-peroxyflavin. The peroxyflavin enzyme intermediate reacts with phenylacetone to form benzylacetate ( k 1 = 73 s (-1)). This latter kinetic event leads to an enzyme intermediate which we could not unequivocally assign and may represent a Criegee intermediate or a C4a-hydroxyflavin form. The relatively slow decay (4.1 s (-1)) of this intermediate yields fully reoxidized PAMO and limits the turnover rate. NADP (+) release is relatively fast and represents the final step of the catalytic cycle. This study shows that kinetic behavior of PAMO is significantly different when compared with that of sequence-related monooxygenases, e.g., cyclohexanone monooxygenase and liver microsomal flavin-containing monooxygenase. Inspection of the crystal structure of PAMO has revealed that residue R337, which is conserved in other BVMOs, is positioned close to the flavin cofactor. The analyzed R337A and R337K mutant enzymes were still able to form and stabilize the C4a-peroxyflavin intermediate. The mutants were unable to convert either phenylacetone or benzyl methyl sulfide. This demonstrates that R337 is crucially involved in assisting PAMO-mediated Baeyer-Villiger and sulfoxidation reactions.

The gene encoding aspartate ammonia lyase (aspB) from Bacillus sp. YM55-1 has been cloned and overexpressed, and the recombinant enzyme containing a C-terminal His(6) tag has been purified to homogeneity and subjected to kinetic characterization. Kinetic studies have shown that the His(6) tag does not affect AspB activity. The enzyme processes L-aspartic acid, but not D-aspartic acid, with a K(m) of approximately 15 mM and a k(cat) of approximately 40 s(-1). By using this recombinant enzyme in the reverse reaction, a set of four N-substituted aspartic acids were prepared by the Michael addition of hydroxylamine, hydrazine, methoxylamine, and methylamine to fumarate. Both hydroxylamine and hydrazine were found to be excellent substrates for AspB. The k(cat) values are comparable to those observed for the AspB-catalyzed addition of ammonia to fumarate ( approximately 90 s(-1)), whereas the K(m) values are only slightly higher. The products of the enzyme-catalyzed addition of hydrazine, methoxylamine, and methylamine to fumarate were isolated and characterized by NMR spectroscopy and HPLC analysis, which revealed that AspB catalyzes all the additions with excellent enantioselectivity (>97 % ee). Its broad nucleophile specificity and high catalytic activity make AspB an attractive enzyme for the enantioselective synthesis of N-substituted aspartic acids, which are interesting building blocks for peptide and pharmaceutical synthesis as well as for peptidomimetics.

The halohydrin dehalogenase from Agrobacterium radiobacter AD1 (HheC) catalyzes nucleophilic ring opening of epoxides with cyanide and azide. In the case of 2,2-disubstituted epoxides, this reaction proceeds with excellent enantioselectivity (E values up to > 200), which gives, by kinetic resolution, access to various enantiopure epoxides and beta-substituted tertiary alcohols (ee up to 99%). Since the enzyme has a broad substrate range and because these tertiary alcohols are difficult to prepare in other ways, HheC is an attractive biocatalyst for the production of P-cyano and P-azido tertiary alcohols.

Oxygenases form an interesting class of biocatalysts, as they typically perform oxygenations with exquisite chemo-, regio-, and/or enantioselectivity. It has been observed that, once heterologously expressed in Escherichia coli , some oxygenases are able to form the blue pigment indigo. We have exploited this characteristic to screen a metagenomic library derived from loam soil and identified a novel oxygenase. This oxygenase shows 50% sequence identity with styrene monooxygenases from pseudomonads (StyA). Only a limited number of homologs can be found in the genome sequence database, indicating that this biocatalyst is a member of a relatively small family of bacterial monooxygenases. The newly identified monooxygenase catalyzes the epoxidation of styrene and styrene derivatives and forms the corresponding ( S )-epoxides with excellent enantiomeric excess [e.g., ( S )-styrene oxide is formed with >99% enantiomeric excess, ee ] and therefore is named styrene monooxgenase subunit A (SmoA). SmoA shows high enantioselectivity towards aromatic sulfides [e.g., ( R )-ethyl phenyl sulfoxide is formed with 92% ee ]. This excellent enantioselectivity in combination with the moderate sequence identity forms a clear indication that SmoA from a metagenomic origin represents a new enzyme within the small family of styrene monooxygenases.

A gene encoding a eugenol oxidase was identified in the genome from Rhodococcus sp. strain RHA1. The bacterial FAD-containing oxidase shares 45% amino acid sequence identity with vanillyl alcohol oxidase from the fungus Penicillium simplicissimum. Eugenol oxidase could be expressed at high levels in Escherichia coli, which allowed purification of 160 mg of eugenol oxidase from 1 L of culture. Gel permeation experiments and macromolecular MS revealed that the enzyme forms homodimers. Eugenol oxidase is partly expressed in the apo form, but can be fully flavinylated by the addition of FAD. Cofactor incorporation involves the formation of a covalent protein-FAD linkage, which is formed autocatalytically. Modeling using the vanillyl alcohol oxidase structure indicates that the FAD cofactor is tethered to His390 in eugenol oxidase. The model also provides a structural explanation for the observation that eugenol oxidase is dimeric whereas vanillyl alcohol oxidase is octameric. The bacterial oxidase efficiently oxidizes eugenol into coniferyl alcohol (KM=1.0 microM, kcat=3.1 s-1). Vanillyl alcohol and 5-indanol are also readily accepted as substrates, whereas other phenolic compounds (vanillylamine, 4-ethylguaiacol) are converted with relatively poor catalytic efficiencies. The catalytic efficiencies with the identified substrates are strikingly different when compared with vanillyl alcohol oxidase. The ability to efficiently convert eugenol may facilitate biotechnological valorization of this natural aromatic compound.

Rhamnolipids produced by Pseudomonas aeruginosa have been proposed as soil washing agents for enhanced removal of metal and organic contaminants from soil. A potential limitation for the application of rhamnolipids is sorption by soil matrix components. The objective of this study is to empirically determine the contribution of representative soil constituents (clays, metal oxides, and organic matter) to sorption of the rhamnolipid form most efficient at metal complexation (monorhamnolipid). Sorption studies show that monorhamnolipid (R1) sorption is concentration dependent. At low R1 concentrations that are relevant for enhancing organic contaminant biodegradation, R1 sorption followed the order: hematite (Fe(2)O(3))kaoliniteMnO(2) approximately illite approximately Ca-montmorillonitegibbsite (Al(OH)(3))humic acid-coated silica. At high R1 concentrations, relevant for use in complexation/removal of metals or organics, R1 sorption followed the order: illitehumic acid-coated silicaCa-montmorillonitehematiteMnO(2)gibbsite approximately kaolinite. These results allowed prediction of R1 sorption by a series of six soils. Finally, a comparison of R1 and R2 (dirhamnolipid) shows that the R1 form sorbs more strongly alone than when in a mixture of both the R1 and R2 forms. The information presented can be used to estimate, on an individual soil basis, the extent of rhamnolipid sorption. This is important for determining: (1) whether rhamnolipid addition is a feasible remediation option and (2) the amount of rhamnolipid required to efficiently remove the contaminant.