Search

Various nanostructured amorphous silicas [fumed silicas such as crude (A-300), hydro-compacted (cA-300, TS 100), and precipitated silica Syloid 244] were modified by different polydimethylsiloxanes such as PDMS5, PDMS100, PDMS200, PDMS1000, and PDMS12500 (the label numbers show the viscosity (η) values) using dimethyl carbonate (DMC) as a siloxane-bond-breaking reagent. In addition, hexamethyldisilazane was used to modify fumed silica cA-300. The nanocomposites were characterized using microscopy, infrared spectroscopy, thermodesorption, nitrogen adsorption–desorption, solid-state NMR spectroscopy, small-angle X-ray scattering, and zeta-potential methods. It was found that the morphological, textural, and structural characteristics of silicas grafted with PDMS depend strongly not only on the type and content of the polymers used but also on the organization of nonporous nanoparticles (NPNP) in secondary structures (aggregates of NPNP and agglomerated aggregates, ANPNP), as well on the reaction temperature (Tr). Specifically, we determined that ANPNP with a macro/mesoporous character are favorable for the effective modification of the silicas studied with short polymers and no DMC addition but at higher temperatures or for a longer silicone polymer with the presence of DMC and at lower temperatures. In particular, the PDMS/DMC-modified silicas are of great interest from a practical point of view because they remain in a dispersed state with no strong compaction of the secondary structures after modification, and this corresponds to a better distribution of the modified nanoparticles in polymeric or other matrices.

Three poly(organosiloxanes) (hydromethyl-, dimethyl-, and epoxymethylsiloxane) of different chain lengths and pendant groups and their mixtures of dimethyl (DMC) or diethyl carbonates (DEC) were applied in the modification of fumed silica nanoparticles (FSNs). The resulting modified silicas were studied in depth using 29Si, 1H, and 13C solid-state NMR spectroscopy, elemental analysis, and nitrogen adsorption-desorption (BET) analysis. The obtained results reveal that the type of grafting, grafting density, and structure of the grafted species at the silica surface depend strongly on the length of organosiloxane polymer and on the nature of the “green” additive, DMC or DEC. The spectral changes observed by solid-state NMR spectroscopy suggest that the major products of the reaction of various organosiloxanes and their DMC or DEC mixtures with the surface are D (RR’Si(O0.5)2) and T (RSi(O0.5)3) organosiloxane units. It was found that shorter methylhydro (PMHS) and dimethylsiloxane (PDMS) and their mixtures with DMC or DEC form a denser coverage at the silica surface since S BET diminution is larger and grafting density is higher than the longest epoxymethylsiloxane (CPDMS) used for FSNs modification. Additionally, for FSNs modified with short organosiloxane PMHS/DEC and also medium organosiloxane PDMS/DMC, the dense coverage formation is accompanied by a greater reduction of isolated silanols, as shown by solid-state 29Si NMR spectroscopy, in contrast to reactions with neat organosiloxanes. The surface coverage at FSNs with the longest siloxane (CPDMS) greatly improves with the addition of DMC or DEC. The data on grafting density suggest that molecules in the attached layers of FSNs modified with short PMHS and its mixture of DMC or DEC and medium PDMS and its mixture of DMC form a “vertical” orientation of the grafted methylhydrosiloxane and dimethylsiloxane chains, in contrast to the reaction with PDMS/DEC and epoxide methylsiloxane in the presence of DMC or DEC, which indicates a “horizontal” chain orientation of the grafted methyl and epoxysiloxane molecules. This study highlights the major role of solid-state NMR spectroscopy for comprehensive characterization of solid surfaces. Graphical abstract

Herein we develop a quantitative dye dequenching technique for the measurement of polymersome fusion, using it to characterize the salt mediated, mechanically-induced fusion of polymersomes with polymer, lipid, and so-called stealth lipid vesicles. While dye dequenching has been used to quantitatively explore liposome fusion in the past, this is the first use of dye dequenching to measure polymersome fusion of which we are aware. In addition to providing quantitative results, dye dequenching is ideal for detecting fusion in instances where DLS results would be ambiguous, such as low yield levels and size ranges outside the capabilities of DLS. The dye chosen for this study was a cyanine derivative, 1,1′-dioctadecyl-3,3,3′,3′-tetramethylindotricarbocyanine iodide (DiR), which proved to provide excellent data on the extent of polymersome fusion. Using this technique, we have shown the limited fusion capabilities of polymersome/liposome heterofusion, notably DOPC vesicles fusing with polymersomes at half the efficiency of polymersome homofusion and DPPC vesicles showing virtually no fusion. In addition to these key heterofusion experiments, we determined the broad applicability of dye dequenching in measuring kinetic rates of polymersome fusion; and showed that even at elevated temperatures or over multiple weeks' time, no polymersome fusion occurred without agitation. Stealth liposomes formed from DPPC and PEO-functionalized lipid, however, fused with polymersomes and stealth liposomes with relatively high efficiency, lending support to our hypothesis that the response of the PEO corona to salt is a key factor in the fusion process. This last finding suggests that although the conjugation of PEO to lipids increases vesicle biocompatibility and enables their longer circulation times, it also renders the vesicles subject to destabilization under high salt and shear (e.g. in the circulatory system) that may lead to, in this case, fusion.

Self-assembled giant polymer vesicles prepared from double-hydrophilic diblock copolymers, poly(ethylene oxide)-b-poly(acrylic acid) (PEO-PAA) show significant degradation in response to pH changes. Because of the switching behavior of the diblock copolymers at biologically-relevant pH environments (2 to 9), these polymer vesicles have potential biomedical applications as smart delivery vehicles.

Polymersomes, hollow spherical nano-to-microscale polymer assemblies, have increasingly become important constructs in the development of biomimetic materials that expand the library of functional and robust analogs to lipid-based vesicles. As compared to liposomes, polymersomes possess superior physical properties and the nearly unlimited potential for synthetic fine-tuning. Herein we improve on the physical properties of these polymer vesicles by introducing platinum-based metal–ligand cross-links into the hydrophobic core, which gave the vesicles demonstrated resistance to destabilization by surfactants over un-cross-linked polymersomes. The formation of cross-links was capable of being selectively reversed by the addition of phosphines. In addition, the Pt(0) cross-links retained their catalytic activity for the hydrosilylation of alkenes.

Previously we have studied the mechanically-activated fusion of extruded (200 nm) polymer vesicles into giant polymersomes using agitation in the presence of salt. In this study we have investigated several factors contributing to this phenomenon, including the effects of (i) polymer vesicle concentration, (ii) agitation speed and duration, and iii) variation of the salt and its concentration. It was found that increasing the concentration of the polymer dramatically increases the production of giant vesicles through the increased collisions of polymersomes. Our investigations also found that increasing the frequency of agitation increased the efficiency of fusion, though ultimately limited the size of vesicle which could be produced due to the high shear involved. Finally it was determined that salt-mediation of the fusion process was not limited to NaCl, but is instead a general effect facilitated by the presence of solvated ionic compounds, albeit with different salts initiating fusion at different concentration.

The temperature-dependent aggregation and recovery of the copolymer poly(ethylene oxide)22-b-poly(N-isopropylacrylamide)29 with a C12 end-cap in aqueous solutions of salts and acids are investigated. Salt solutions affected the critical aggregation temperature of the copolymer in a manner predictable according to the Hofmeister series, with the kosmotropic adipic ion lowering the critical aggregation temperature and the chaotropic iodide raising it. Also, both salts and acids increased the size of copolymer aggregates formed with heating, due to the electrostatic shielding of aggregated structures provided by the electrolytes. Additionally, the presence of ionic additives caused a thermohysteretic increase in the size of copolymer aggregates with temperature cycling. The transitions of polymer structure with increasing temperature were surprisingly sharp with the C12 end-cap present, and particularly broad in samples in which the end cap had been cleaved. This observation suggested that the hydrophobic end group was responsible for imparting some degree of order to the polymer at low temperatures, which allowed for rapid reconfiguration with increasing temperature. Finally, in addition to the transitions expected from the least critical solution temperature behavior of the polymer blocks, we have observed an unexpected additional transition which we attribute to the contraction of the poly(ethylene oxide) chains of the copolymer aggregates at higher temperatures. This work illustrates the importance of considering the environment and composition of thermoresponsive block copolymers in certain applications, particularly in solutions with even modest electrolyte concentrations (1–10 mM), as it can have a profound effect on transition temperatures and morphology. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014, 52, 507–516

We describe for the first time how biological nanomotors may be used to actively self-assemble mesoscale networks composed of diblock copolymer nanotubes. The collective force generated by multiple kinesin nanomotors acting on a microtubule filament is large enough to overcome the energy barrier required to extract nanotubes from polymer vesicles comprised of poly(ethylene oxide-b-butadiene) in spite of the higher force requirements relative to extracting nanotubes from lipid vesicles. Nevertheless, large-scale polymer networks were dynamically assembled by the motors. These networks displayed enhanced robustness, persisting more than 24 h post-assembly (compared to 4–5 h for corresponding lipid networks). The transport of materials in and on the polymer membranes differs substantially from the transport on analogous lipid networks. Specifically, our data suggest that polymer mobility in nanotubular structures is considerably different from planar or 3D structures, and is stunted by 1D confinement of the polymer subunits. Moreover, quantum dots adsorbed onto polymer nanotubes are completely immobile, which is related to this 1D confinement effect and is in stark contrast to the highly fluid transport observed on lipid tubules.

Large (200 nm) poly(ethylene oxide)-b-poly(butadiene) polymer vesicles fuse into giant (>1 μm) vesicles with mild agitation in dilute aqueous NaCl solutions. This unusual effect is attributed to the salt-induced contraction of the poly(ethylene oxide) corona, reducing steric resistance between vesicles and, with agitation, increasing the probability of contact between the hydrophobic cores of adjacent membranes. In addition, NaCl and agitation facilitated the creation of giant hybrid vesicles from much smaller homogeneous polymersomes and liposomes. Whereas lipid vesicles do not readily fuse with each other under the same circumstances, they did fuse with polymersomes to produce hybrid polymer/lipid vesicles.

Polymersomes are being widely explored as synthetic analogs of lipid vesicles based on their enhanced stability and potential uses in a wide variety of applications in (e.g., drug delivery, cell analogs, etc.). Controlled formation of giant polymersomes for use in membrane studies and cell mimetic systems, however, is currently limited by low-yield production methodologies. Here, we describe for the first time, how the size distribution of giant poly(ethylene glycol)-poly(butadiene) (PEO-PBD) polymersomes formed by gel-assisted rehydration may be controlled based on membrane fluidization. We first show that the average diameter and size distribution of PEO-PBD polymersomes may be readily increased by increasing the temperature of the rehydration solution. Further, we describe a correlative relationship between polymersome size and membrane fluidization through the addition of sucrose during rehydration, enabling the formation of PEO-PBD polymersomes with a range of diameters, including giant-sized vesicles (>100 μm). This correlative relationship suggests that sucrose may function as a small molecule fluidizer during rehydration, enhancing polymer diffusivity during formation and increasing polymersome size. Overall the ability to easily regulate the size of PEO-PBD polymersomes based on membrane fluidity, either through temperature or fluidizers, has broadly applicability in areas including targeted therapeutic delivery and synthetic biology.