Search

Two new chlorodiorganotin(IV) dithiocarbamate complexes with general formula {(R2SnCl)dtc} (dtc = R1R2NCS2−, R1 = Bn, R2 = naphtylimide; 3, R = n-Bu; 4, R = Ph) have been prepared from sodium N-[2-(benzylamino)ethyl]naphthalene-1,8-dicarboximide dithiocarbamate 2. The bis-dithiocarbamete 3d (R2Sn(dtc)2, R = n-Bu) was obtained as the thermodynamic product during the titration process (vide infra). All compounds were characterized by mass spectrometry, IR, 1H and 13C NMR spectroscopy. The chlorodiorganotin(IV) dithiocarbamate complexes 3–4 also were characterized by 119Sn NMR spectroscopy and single crystal X-ray diffraction analysis. The crystallographic study of these complexes showed the existence of C H…π, S…π and π…π intramolecular interactions, indicating that the naphthylimide aromatic fragment stabilized the complexes. Complexes 3 and 4 were studied as host for anions (CH3CO2−, F−, H2PO4−) in CDCl3 by UV–Vis and 119Sn NMR spectrometric titrations. The tested anions cause the displacement of the chloride ligand of the metallic centre. The excess of F− or H2PO4− induce the self-assembly of diorganotin(IV) dithiocarbamate to bis-dithiocarbamates R2Sn(dtc)2 (3d) instead of the breaking of the S Sn covalent bond. Quantum mechanical calculations at DFT level (B3LYP/def2-TZVP) were performed to obtain the thermodynamic parameters of the reactions involved in the anion addition to the complexes.

In the structure of the title compound, cooperative C—H⋯O=C, C—H⋯π and offset π–π inter­actions generate supra­molecular nanotubes which accommodate the 2,3-di­chloro­benzene solvent mol­ecules., The asymmetric unit of the title compound, C56H50N6O8S2·3C6H4Cl2, contains two half-mol­ecules of the parent, A and B, which both have crystallographic inversion symmetry, together with three 2,3-di­chloro­benzene mol­ecules of solvation. Mol­ecules A and B are conformationally similar, with dihedral angles between the central naphthalenedi­imide ring and the peripheral naphthalene and benzyl rings of 2.43 (7), 81.87 (7)° (A) and 3.95 (7), 84.88 (7)° (B), respectively. The conformations are stabilized by the presence of intra­molecular π–π inter­actions between the naphthalene ring and the six-membered di­imide ring of the central naphthalenedi­imide moiety, with ring centroid-to-centroid distances of 3.5795 (8) Å (A) and 3.5640 (8) Å (B). In the crystal, C—H⋯O hydrogen bonds link the mol­ecules into infinite supra­molecular chains along the c axis. These chains are inter­connected through C—H⋯π and offset π–π inter­actions, generating supra­molecular nanotubes which are filled by 1,2-di­chloro­benzene mol­ecules.

The chlorodiphenyltin(IV) dithiocarbamate complexes 1–5 with general formula {(Ph2SnCl)dtc} (dtc = R1R2NCS2−; 1, R1 = Bn, R2 = 9-anthrylmethyl; 2, R1 = Bn, R2 = 9-phenanthrylmethyl; 3, R1 = Bn, R2 = 1-pyrenylmethyl; 4, R1 = 1-naphthylmethyl, R2 = 1-pyrenylmethyl; 5, R1 = R2 1-pyrenylmethyl) have been tested as host for anions and neutral amines in acetonitrile by spectrophotometric UV/Vis titrations. In addition, the titrations of the complexes 1 and 5 were studied in chloroform by 1H and 119Sn NMR spectroscopy. It was found that anions as acetate, benzoate, and dihydrogen phosphate cause a displacement of the dithiocarbamate ligands of metallic center independently of the aromatic nature of the substituents on the nitrogen atom functioning as chemodosimeters in which the indicator is displaced. However, some aliphatic amines and aromatic methylene amines and its aromatic analogs can act as guests with binding constants in the range of 103 to 106 M−1. Also, in these cases compound 5 functions as chemodosimeter without displacement of the indicator. According to 1H, 13C, 119Sn NMR data and using DFT (B3LYP) and Poisson–Boltzmann (PB) to model the solvent, structures of the complexes are proposed in which the hydrophobic and π–π interactions are suggested as the dominant interactions.

Four new homoditopic bis[chlorodiorganotin(IV) and triorganotin(IV) dithiocarbamate] complexes derived from naphthalene diimide (NDI) with general formula NDI-[(CH2)2-N(CH2Ph)(CS2SnR2X)]2, 3: R = n-Bu, X = Cl; 4: R = Me, X = Cl; 5: R = Ph, X = Cl; 6: R = X = Me; were prepared from triethylammonium ((1,3,6,8-tetraoxo-1,3,6,8-tetrahydrobenzo[lmn][3,8]phenanthroline-2,7-diyl)bis(ethane-2,1-diyl))bis(benzylcarbamodithioate) 2. All compounds were characterized by IR, as well as 1H and 13C NMR spectroscopy. The complexes 3–6 also were characterized by 119Sn NMR spectroscopy. In addition, complex 3 was further characterized by single-crystal X-ray diffraction analysis. The crystallographic study performed on complex 3 showed that the tin atom has a coordination geometry intermediate between square-pyramid and a trigonal-bipyramidal, with τ value of 0.69. In addition the presence of cooperative C H…π, C H…S, C H…O and S…π intramolecular interactions in the crystal structure of 3 was observed. The interaction of complexes 3–6 with anions (CH3CO2−, F−, H2PO4−) in CDCl3 was studied by UV/Vis, fluorescence and 119Sn NMR titrations. The addition of the foregoing anions to complexes 3-6 lead to the displacement of the chloride ligand at the tin(IV) atom. However, an the excess of F− or H2PO4− induced the self-assembly of complexes 3 and 5 in their corresponding binuclear metallomacrocycles.

Imine formation in aqueous solution of kanamycin A with pyridoxal 5'-phosphate and other aldehydes was studied by potentiometry, NMR spectroscopy and computational chemistry. It was found that imines are formed with yields near 100 % at pH 7 in equimolar reactant ratio. In order to identify the kanamycin amino groups involved in the reaction, a NMR spectroscopic study was conducted. The structures of possible imines formed between kanamycin and FURAN or PLP were optimized by molecular mechanics with the OPLS-2005 force field. The 1H NMR spectra were calculated at the DFT-GIAO B3LYP/6-31G(d) level of theory for all structures and compared with the experimentally observed spectra. From these results a probable structure of the imines was proposed. The results obtained in this work show that kanamycin has the ability to form imine derivatives in high yields due to its anion recognition properties. Copyright © 2012 John Wiley & Sons, Ltd.

Nine mononuclear diorganotin(IV) dithiocarbamate complexes 1–9 with 19-, 20- and 21-membered macrocyclic structures were synthesized from dimethyl, di-n-butyl, and diphenyltin(IV) dichloride and three bis-dithiocarbamate ligands derived from secondary bis-amines having aromatic spacer groups. All compounds were characterized by elemental analysis, mass spectrometry, and spectroscopic methods (IR and 1H, 13C, and 119Sn NMR). Additionally, quantum chemical DFT calculations were performed for the dimethyltin(IV) derivatives in order to model the molecular structures. For one compound series the NMR spectra showed a concentration-dependent behavior in solution, which was analyzed in detail and permitted to postulate the existence of an equilibrium with the corresponding [2+2] macrocycles.

Five new chlorodiorganotin(IV) complexes derived from dithiocarbamate ligands have been prepared and structurally characterized. The complexes 1–5 with the general formula {(Ph2SnCl)dtc} (dtc = R1R2NCS2−; 1, R1 = Bn, R2 = 9-anthrylmethyl; 2, R1 = Bn, R2 = 9-phenanthrylmethyl; 3, R1 = Bn, R2 = 1-pyrenylmethyl; 4, R1 = 1-naphthylmethyl, R2 = 1-pyrenylmethyl; 5, R1 = R2 = 1-pyrenylmethyl) have been obtained from Ph2SnCl2 and the sodium dithiocarbamate salts of benzyl(9-anthrylmethyl)amine, benzyl(9-phenanthrylmethyl)amine, benzyl(1-pyrenylmethyl)amine, 1-naphthylmethyl(1-pyrenylmethyl)amine and di(1-pyrenylmethyl)amine. Compounds 1–5 have been analyzed as far as possible by elemental analysis, FAB+ mass spectrometry, IR, UV–Vis, fluorescence and NMR (1H, 13C, 119Sn) spectroscopy, and single-crystal X-ray diffraction analysis (1–3). The solid-state and solution studies showed that the dtc ligands are coordinated to the tin atoms in the anisobidentate manner. In all cases the metal centers are five-coordinate. The coordination geometry is intermediate between square-pyramidal and trigonal-bipyramidal coordination polyhedra with τ-values in the range of 0.49–0.55. The crystal structures show the presence of C–H···Cl, C–H···S, C–H···π, offset π–π and S···π contacts. The stability of the (Ph2SnCl)dtc complexes in the presence of the acetate anion has been examined in acetonitrile solutions. For all of these organotin(IV) complexes the displacement of the coordinated ligands (i.e., chloride and dtc) by the acetate anion was observed. The lability, as well as their intrinsic fluorescent properties of the polyaromatic moieties in these (Ph2SnCl)dtc compounds make them interesting candidates to detect the presence of O-donor anions at very low concentrations by displacement of the metal-coordinated dtc.

Interactions of protonated forms of kanamycin A with nucleotides and several simple phosphate anions have been studied by potentiometric and NMR titrations. The affinity of kanamycin A to anions is comparable to that observed with other aliphatic polyammonium receptors of similar charge, but it discriminates triphosphate nucleotides with different nucleobases with binding constants following the order GTP≫CTP ≈ ATP. Kanamycin A also binds the respective uncharged nucleosides with the same selectivity. Binding of ATP is exothermic with a negative entropic contribution in contrast to what is expected for simple ion pairing. Other tested aminoglycosides, amikacin and streptomycin, bind ATP less efficiently than kanamycin A. Models of structures of kanamycin A complexes with ATP and GTP obtained by molecular mechanics (OPLS-2005) calculations based on 1H and 31P NMR data confirm the possibility of nucleotide discrimination by simultaneous ion pairing of terminal nucleotide phosphate groups with ammonium sites...

Association of amino acids and some other low molecular weight compounds with rifamycin SV in water has been studied by 1H NMR titrations. Rifamycin binds aromatic amino acids with pronounced enantioselectivity in favor of l-enantiomers and forms complexes with heterocyclic compounds but does not interact with simple benzene derivatives. Binding constants correlate with LUMO energies and hydrophobicities (expressed as log P values) of guest molecules indicating contributions to the binding free energy from aromatic stacking interactions with the naphthohydroquinone fragment of rifamycin SV and from hydrophobic interactions. Proposed mode of binding is supported by semiempirical calculations of structures of host–guest complexes.

Interactions of 2-, 3- and 4-formyl phenylboronic acids (FPBAs) with sugars, amino sugars, aminoglycosides and various poly- and monoamines have been studied by UV-vis, (1)H and (11)B NMR titrations in water at variable pH. Behavior of 2-FPBA was anomalous in several aspects. Transformation of the acid into its conjugate base was slow in NMR time scale and was accompanied by intramolecular cyclization affording the respective benzoboroxole. The equilibrium constants for imine formation (K(imine)) between 2-FPBA and simple monoamines including amino sugars were ca. 2 orders of magnitude larger than those with other isomers. Still one order of magnitude larger K(imine) values were observed for 2-FPBA with aminoglycosides (kanamycin, amikacin, gentamicin, neomycin) and polyamines (spermine, spermidine). The examination of UV-vis and (11)B NMR spectra of imines formed with 2-FPBA showed that formally neutral Schiff bases in fact were zwitterionic species containing a protonated imine group and an anionic B(OH)(3)(-) group. The enhanced stability of imines with monoamines can therefore be attributed to the electrostatic stabilization provided by the zwitterionic structure and further increased stability of imines with antibiotics and polyamines is explicable by additional stabilization of the borate anionic group by ion paring with ammonium groups not involved in Schiff base formation. Thanks to high molar absorptivity of protonated imines interaction of 2-FPBA with aminoglycosides allows detecting them spectrophotometrically in a μM concentration range in neutral aqueous solutions in the presence of sugars, amino sugars and amino acids.

The alkali metal (Na+, K+, Rb+, Cs+) bis-dithiocarbamate (bis-dtc) salts of N,N′-dibenzyl-1,2-ethylenediamine have been prepared from the reaction of N,N′-dibenzyl-1,2-ethylenediamine with carbon disulfide in the presence of two equivalents of the corresponding alkali metal hydroxide. Additionally, the analogous triethylammonium derivative has been obtained. The resulting compounds have been analyzed as far as possible by elemental analysis, FAB+ mass spectrometry, IR, UV-Vis and NMR (1H, 13C) spectroscopy, and single-crystal X-ray diffraction, showing that the composition of the metal salts can be described by the general formula [{[(H2O)xM-µ-(H2O)yM(H2O)x][bis-dtc]}n] (1, M = Na+, x = 3, y = 2; 2, M = K+, x = 1, y = 2; 3, M = Rb+, x = 0, y = 1; 4, M = Cs+, x = 0, y = 1; 5, M = Et3HN+, x = 0, y = 0). The solid-state and solution studies showed that all alkali metal ions participate in the formation of M–O and cation-π(arene) interactions, while M–S interactions are only observed for the larger alkali metals K+, Rb+ and Cs+. As expected, within the alkali metal group there is a clear tendency for a decreasing number of M–O bonds in favor of M–S and cation–π(arene) interactions, however, only K+ forms a semi-sandwich type complex with η6-coordination.

Oxidation of aniline with ammonium peroxodisuffate in aqueous solutions containing poly(3-sutfonato-4-hydroxystyrene) gave polymer alloys (or polymer blends) with a general composition of {(—C6H4NH—)[—CH2—CH(C6H3·OH·SO3–)—]x(H2SO4)y·zH2O}n. Their electrical conductivities depended on the composition and varied between 10–5 and 0.5 S cm–1 at 300 K. The polyaniline salts were soluble in water and exhibited an electronic absorption band characteristic of emeraldine salts at 800 nm. The corresponding alkaline solutions showed a band due to emeraldine bases at 600 nm. These bands showed a pH dependence that is a consequence of an interchain interaction between two kinds of polymer chains. A polymer with x= 04, y= 1.2 and z= 3.6 was soluble enough to observe EPR spectra, whose pH dependence showed that, with increasing pH, deprotonation occurs at polarons prior to deprotonation at bipolarons.

A protonated cation salt of title compound C36H48N8O12 crystallized in the monoclinic space group with cell parameters a = 11.4721(8)A, b = 23.1049(16)A, c = 21.0730(14)A, β = 99.0040(10)° and Z = 4; the final residual factor was 0.0582 with 9694 reflections. A cyclophane conformation was determinated by an interplay between the ridigidy of amide and phenyl groups and the presence of intramolecular hydrogen bonds and C-H…π interactions.

Five hydrazone derivatives of streptomycin were synthetized (D0h, D1ph, D2bt, D3dctf, D4ag) and characterized by IR, 1H and 13C NMR spectroscopy, mass spectrometry and elemental analysis. Protonation constants were determined by potentiometry for all derivatives. D1ph and D2bt derivatives were investigated as receptors of dicarboxylates and adenine nucleotides in aqueous solution by potentiometric and 1H NMR titrations. D1ph and D2bt derivatives have the highest affinity with AMP and ATP, respectively, which shows that electrostatic forces are not always the dominant factor in binding of streptomycin derivatives with nucleotides, but the conformational fit between them. Calculated structures at the DFT level of the D1ph derivative bonded with either AMP or ADP showed that the complexes are stabilized by the formation of multiple interactions with the receptors. The antibiotic activity of the derivatives was explored and compared with native streptomycin.

Two bis crown ether receptors were synthesized and tested as host molecules for protonated forms of alkyl amines and amino acid esters. Molecular recognition studies were conducted in CH2Cl2:MeOH (92:8) by spectrophotometric UV/Vis titrations andby spectrometric 1H NMR titrations in CDCl3. The calculated binding constants are in the range 102-105 M-1. A high affinity for L-amino acid methyl ester derivatives was found. A theoretical study at the DFT level of the synthesized receptor and some analog ligands with three different ammonium ions helps to rationalize the experimentally found trends.

Polyaniline salts of toluenesulfonate (TS) and sulfonated poly( p -vinylphenol) (SPVP) have been prepared. The polyaniline salt of TS exhibited a room-temperature electrical conductivity of 10 S cm −1 . The activation energy for electrical conduction was 0.02 eV, which was significantly smaller than the value 0.04 eV reported for other salts. The aromatic nature of the organic anion is expected to enhance the interchain diffusion of charge carriers. The electrical conductivity of the polyaniline salt of the polymer anion was of the order of 10 −4 S cm −1 . A polyaniline base derived from the SPVP salt was water-soluble in the presence of excess NaSPVP, due to complexation between the two polymers.