Search

A scalable synthesis of high refractive index, optically transparent photopolymers from a family of low-viscosity multifunctional thiol and alkyne monomers via thiol-yne "click" is described herein. The monomers designed to incorporate high refractive index cores consisting of aryl and sulfide groups with high intrinsic molar refraction were synthesized starting from commercially available low-cost raw materials. The low-viscosity (

The kinetic effects of the substitution and functionality of the thiol in thiol-Michael reactions were investigated using model monofunctional thiols and multifunctional thiols used in various cros...

This article describes an efficient enamine organocatalyzed thiol-Michael click reaction and its broad application in cross-linking polymerizations. A series of enamines was shown to catalyze the t...

Thermoplastics encompass the majority of commercial plastics but are limited to manufacturing techniques that require heat and/or solvent to enable material reprocessing and reshaping. Photopolymer...

Photomechanical effects in liquid crystal elastomers (LCEs) functionalized with photochromic moieties, such as azobenzene, have been widely studied. This prior work has demonstrated that isothermal, photoinduced (e.g. phototropic) disruption of order via isomerization of azobenzene affects the anisotropic chain configurations of the polymer network. Here, we examine the contribution of the strength of intermolecular interactions between polymer chains in the LCE to both the thermotropic and phototropic response. By incorporating liquid crystalline monomers with reduced aromatic content, both the temperature and irradiation conditions to induce mechanical response are reduced.

A photoprintable dynamic thiol-ene resin was developed based on commercially available anhydride, thiol, and ene monomers. The dynamic chemistry chosen for this study relied on the thermal reversibility of the in situ generated thioester-anhydride links. The resin's rheological and curing properties were optimized to enable 3D printing using the masked stereolithography (MSLA) technique. To achieve a desirable depth of cure of 200 μm, a combination of radical photoinitiator (BAPO) and inhibitor (pyrogallol) were used at a weight ratio of 0.5 to 0.05, resulting in more than 90% thiol-ene conversion within 12 s curing time. In a series of stress relaxation and creep experiments, the dynamic reversible exchange was characterized and yielded rapid exchange rates ranging from minutes to seconds at temperatures of 80-140 °C. Little to no exchange was observed at temperatures below 60 °C. Various 3D geometries were 3D printed, and the printed objects were shown to be reconfigurable above 80 °C and depolymerizable at or above 120 °C. By deactivation of the exchange catalyst (DMAP), the stimuli responsiveness was demonstrated to be erasable, allowing for a significant shift in the actuation threshold. These highly enabling features of the dynamic chemistry open up new possibilities in the field of shape memory and 4D printable functional materials.

Controlling the microstructure of heterogeneous, polymer membranes used in gas barrier and gas separation technologies is challenging. Being able to control composite structures is beneficial to achieve an optimum combination of gas permeation and mechanical performance. In addition, unique properties such as anisotropy and confined transport can be controlled by tailoring the size and position of constituent materials. Two-stage reactive polymer (TSRP) networks are an emerging dual-cure polymer material for spatially varying cross-linking density via photopatterning. In this work a thiol–acrylate-based TSRP was used to investigate the effects of pattern geometry on CO₂ permeability and mechanical properties. Line and square patterns of alternating high and low cross-linking density, with characteristic dimension between 1 mm and 10 μm, were generated in TSRP membranes. Notably, synergistic enhanced barrier properties were observed for 10 μm square patterns of lower cross-linking density (or higher permeability) material exhibiting two confined dimensions compared to line gratings with only one confined dimension.

A high-performance holographic recording medium was developed based on a unique combination of photoinitiated thiol–ene click chemistry and functional, linear polymers used as binders. Allyl reacti...

In the present work, the photocatalytic activity was investigated toward a thiol-Michael reaction of different combinations of 9-fluorenylmethyl carbamate (Fmoc) derivatives and photocaged amines (PCA) as base amplifiers and the catalytic base, respectively. This phototriggering approach was systematically studied for evaluating its effect on kinetics between thiol and Michael acceptors like acrylate or sulfone wherein, butyl 3-mercaptopropionate (BMP), 1-hexyl acrylate (HA), and ethyl vinyl sulfone (EVS) were used as model reactants. Interestingly, PCAs exhibited low quantum yields by themselves; NPPOC-Hex (2.5 mol %) which when used with BMP and HA, resulted in only 25% thiol conversion; however, when used along with Fmoc-Hex or Fmoc-TMG (2.5 or 5 mol %), it resulted in a higher thiol conversion of 50–60%. Furthermore, use of NPPOC-DEA (5 mol %) with 1 mol % Fmoc-TMG resulted in >70% thiol conversion for the same system. Upon using BMP and EVS nearly complete conversion of functional groups with 5 mol % NPPOC-DEA and 5 mol % Fmoc-DEA was obtained. This enhancement in reaction kinetics and conversion upon addition of an Fmoc derivative to a monofunctional thiol-Michael system was extended to multifunctional derivatives for polymerizing cross-linked polymer networks. Moreover, the kinetic study on model reactants also demonstrated efficient dark curing, resulting in 50–75% thiol conversion with only 30 s irradiation time, leading to validation of the efficacy of Fmoc derivatives and PCAs as photocatalysts for dark cure. Upon precise characterization in cross-linked systems using Raman spectroscopy for TMPTA/PETMP in the presence of 20 mol % NPPOC-DEA and 1 mol % Fmoc-TMG, the extent of dark cure was evaluated for a distance of 16.5 mm, which was observed to undergo maximum conversion and high dark cure propagation upon heating to 70 °C. Therefore, Fmoc-PCA catalysis is a practically useful approach for improving the photoinitiated efficiency of the thiol-Michael reaction and enabling photopolymerization in the dark with a marked improvement in photosensitivity.

The effect of thiol substitution in radical thiol–ene reactions has been studied by using model, monofunctional thiols as well as multifunctional thiol monomers along with the assessment of their subsequent polymerization reactions and polymer mechanical behavior. FT-IR was used to monitor the polymerization rate and quantify the overall conversion. While the total conversion was observed to range from 70% to 100%, the polymerization rate was found to decrease by as much as 10-fold as the thiol substitution was changed from primary to tertiary. Analogous multi-thiol monomers of similar structure but varying substitution were synthesized to observe the effect of substitution type on polymerization kinetics and polymer behavior. Methylation at the α-carbon was varied from primary to tertiary to observe these differences. Mechanical properties were assessed by using dynamic mechanical analysis and water sorption experiments, where the glass transition temperatures were found to be within 1–2 °C as thiol substitution varied. Furthermore, primary thiol films absorbed 1–3% more water than secondary thiol films. Resin shelf stability experiments were performed by using rheometry to measure storage time-dependent viscosity changes, and it was found that secondary thiol films remained relatively stable for up to 100 times longer than their primary counterparts. It was concluded that while there are differences under relatively slow initiation conditions, at typical initiation rates all three thiol substitutions may be made to react at similar rates for both monofunctional and polymeric systems.

The unique photodynamics of aromatic thiols (relative to alkyl thiols) allowed their employment as effective ultraviolet and visible light photoinitiators (PIs) for acrylate photopolymerizations, r...

The reaction of thiols and anhydrides to form ring opened thioester/acids is shown to be highly reversible and it is accordingly employed in the fabrication of covalent adaptable networks (CANs) that possess tunable dynamic covalent chemistry. Maleic, succinic, and phthalic anhydride derivatives were used as bifunctional reactants in systems with varied stoichiometries, catalyst, and loadings. Dynamic characteristics such as temperature-dependent stress relaxation, direct reprocessing and recycling abilities of a range of thiol-anhydride elastomers, glasses, composites and photopolymers are discussed. Depending on the catalyst strength, 100 % of externally imposed stresses were relaxed in the order of minutes to 2 hours at mild temperatures (80-120 °C). Pristine properties of the original materials were recovered following up to five cycles of a hot-press reprocessing technique (1 h/100 °C).

Functional nanogels are attractive additives for use in polymer composites. In this study, nanogels with internal allyl sulfide moieties throughout their network structure were prepared via a thiol-Michael addition reaction. The excess thiol-functionalized nanogels were less than 60 nm as discrete particles but act as room-temperature liquids in the bulk state. The reactive nanogels can be dispersed in and swollen by a thiol-ene matrix resin, which upon photopolymerization yields dramatically decreased levels of polymerization shrinkage stress. Furthermore, the postcured nanogel-modified polymers effectively relaxed applied stresses as well as enhanced toughness during exposure to a UV light source that activated the addition-fragmentation as a means for dynamic bond exchange. These nanogels provide a generic approach to introduce adaptable network performance that significantly improves a number of key properties of glassy cross-linked polymer.

Because of facile implementation, quantitative conversions, and an insensitivity to oxygen, water, and most organic functional groups, radical-mediated thiol-ene coupling (TEC) reactions have emerged as a valuable tool in macromolecule synthesis. It was recently demonstrated that the kinetics and conversions of thiyl radical-mediated reactions are adversely affected in the presence of basic amines by the formation of retardive thiolate anions. Herein, the performance of TEC polymerizations is evaluated under a variety of reaction environments with the intention to aid in the optimal formulation design of TEC reactions in the presence of amines. Results from both bulk and aqueous-phase network photopolymerizations established that sensitivity to amine basicity and pH is dependent on the thiol acidity, although norbornene-type alkenes exhibit a unique ability to achieve high conversions, where allyl ethers, vinyl ether, and vinyl siloxanes are highly inhibited. Additionally, the protic solvents such as alcohols and acetic acid are established as ideal solvents or additives to suppress or eliminate amine-induced retardation.

Motivated by the various reported potential applications of poly(phosphine oxide) materials, a visible light photoinitiated iodo-ene reaction was successfully employed in network polymerization between the phosphorus-containing multifunctional monomer, tris(allyloxymethyl)phosphine oxide (TAOPO), and diiodoperfluorobutane. The cross-linked poly(phosphine oxide) network exhibited a higher glass transition temperature than a similarly cross-linked polymer formulated with trimethylolpropane triallyl ether (TMPTAE). Interestingly, the TMPTAE/DIPFB cross-linked polymer, changed color from clear to yellow within 10 min of exposure to air, whereas the cross-linked poly(phosphine oxide) underwent a similar change only upon heating. Upon investigation, it was determined that alkenes were generated within the polymer network, presumably via elimination, accounting for the observed color. These double bonds, formed in the polymer matrix, permitted surface modification via radical thiol-ene reaction. The successful surface functionalization with PEG-SH resulted in increasing the surface wettability. Additionally, the phosphorus-containing network polymer with double bonds in the polymer matrix showed shape memory capability, this representing an exciting and versatile materials platform.

A new group of nitrogen-centered nucleophilic catalysts for the thiol-Michael addition “click” reactions is examined. These nucleophiles showed efficient catalytic activities as compared with traditional base catalysts, such as triethylamine, and are demonstrated to be a viable strategy for cross-linking polymerization reactions. Additionally, an experimental and computational mechanistic study was performed, suggesting a pathway for the nitrogen-centered catalyst to undergo the nucleophilic addition mechanism.

An approach to efficient and scalable production of oligonucleotide-based gel networks is presented. Specifically, a new class of xenonucleic acid (XNA) synthesized through a scalable and efficient thiol–ene polymerization mechanism, “clickable” nucleic acids (CNAs), were conjugated to a multifunctional poly(ethylene glycol), PEG. In the presence of complementary single stranded DNA (ssDNA), the macromolecular conjugate assembled into a crosslinked 3D gel capable of achieving storage moduli on the order of 1 kPa. Binding studies between the PEG-CNA macromolecule and complementary ssDNA indicate that crosslinking is due to the CNA/DNA interaction. Gel formation was specific to the base sequence and length of the ssDNA crosslinker. The gels were fully thermoreversible, completely melting at temperatures above 60 °C and re-forming upon cooling over multiple cycles and with no apparent hysteresis. Shear stress relaxation experiments revealed that relaxation dynamics are dependent on crosslinker length, which is hypothesized to be an effect of the polydisperse CNA chains. Arrhenius analysis of characteristic relaxation times was only possible for shorter crosslinker lengths, and the activation energy for these gels was determined to be 110 ± 20 kJ mol−1. Overall, the present work demonstrates that CNA is capable of participating in stimuli-responsive interactions that would be expected from XNAs, and that these interactions support 3D gels that have potential uses in biological and materials science applications.

An athermal approach to mRNA enrichment from total RNA using a self-immolative thioester linked nucleic acids (TENA) is described. Oligo(thymine) (oT) TENA has a six-atom spacing between bases which allowed TENA to selectively base-pair with polyadenine RNA. As a result of the neutral backbone of TENA and the hydrophobicity of the octanethiol end group, oT TENA is water insoluble and efficiently pulled down 93±2 % of EGFP mRNA at a concentration of 10 ng μL-1 . Self-immolative degradation of TENA upon ambient temperature exposure to nucleophilic buffer components (Tris, DTT) allowed recovery of 55±27 ng of mRNA from 3.1 μg of total RNA, which was not statistically different from the amount recovered using Dynabeads® mRNA DIRECT Kit (89±24 ng). Gene expression as measured by RT-qPCR was comparable for both enrichment methods, suggesting that the mild conditions required for enrichment of mRNA using oT TENA are compatible with RT-qPCR and other downstream molecular biology applications.

Semicrystalline polymeric materials possessing extraordinary mechanical properties were rapidly fabricated using light from low viscosity liquids at room temperature. Unlike conventional photopolymerizations which form crosslinked networks, this material is a noncrosslinked polymer which renders it meltable and intrinsically reprocessable. This introduces a new class of high performance, recyclable materials applicable for light-based additive manufacturing.

Recycling of polyurethanes is largely infeasible due to the harsh reprocessing conditions and associated risks of side reactions and degradation whereas polymer networks incorporating dynamic covalent bonds represent an attractive approach to the design of recyclable materials. Here, we report findings on the dynamic nature of thiourethanes, and their application as a new class of recyclable analogs of urethane materials. A series of small molecule experiments was initially conducted to determine the equilibrium constant and exchange reaction kinetic constant for the thiol–isocyanate reaction. Furthermore, incorporating those thiourethane moieties into a cross-linked network resulted in thermoset materials that are readily depolymerized to liquid oligomers. The resultant oligomers can be re-crosslinked to thiourethanes without any loss of performance nor change in mechanical properties (peak stress of 25 MPa with max strain of 200%). Moreover, the recycled thiol oligomers from thiourethane network polymers could potentially be transformed into other materials with mechanical properties that exceed those of the initial, pristine thiourethane materials. Overall, the ease with which these polythiourethanes are polymerized, recycled and reformulated gives a new direction and hope in the design of sustainable polymers.

A phosphatidylcholine-based cerasome (PC-cerasome) was prepared by a combination of a copper-catalyzed azide alkyne cyclo-addition (CuAAC) reaction and a sol–gel condensation process. In a 2 wt % u...

Photopolymers formed from the family of thiol-X “click” reactions notably form sulfur-containing thioether linkages. While sulfur-containing materials are conventionally expected to result in high ...

Thermally transformable/responsive (meth)acrylate photopolymer networks were constructed from commercial (meth)acrylate esters and synthetic di- and mono(meth)acylate monomers bearing thioester functionalities. The thermal responsiveness, here self-limited exchange, relied on the catalytic metamorphosis of thioesters into esters with the concomitant depletion of hydroxyls and subsequent generation of free thiols. The thioester–hydroxyl cross-exchange was demonstrated in network systems with interchain thioesters as well as in networks with side-chain pendant thioacetyls. The interchain metamorphosis resulted in close to 80% conversion of thioesters into esters when 2 equiv of hydroxyl groups was initially present. In practical terms, such an outcome enabled efficient stress relaxation (60%) and good shape adaptation (90% shape fixity) in 1 h at 105 °C. On the other hand, side-chain S → O acyl transfer reactions were found to vary in efficiency depending on the vicinity of thioesters and hydroxyls. When in...

The ability to behave in a fluidlike manner fundamentally separates thermoset and thermoplastic polymers. Bridging this divide, covalent adaptable networks (CANs) structurally resemble thermosets with permanent covalent crosslinks but are able to flow in a manner that resembles thermoplastic behavior only when a dynamic chemical reaction is active. As a consequence, the rheological behavior of CANs becomes intrinsically tied to the dynamic reaction kinetics and the stimuli that are used to trigger those, including temperature, light, and chemical stimuli, providing unprecedented control over viscoelastic properties. CANs represent a highly capable material that serves as a powerful tool to improve mechanical properties and processing in a wide variety of polymer applications, including composites, hydrogels, and shape-memory polymers. This review aims to highlight the enabling material properties of CANs and the applied fields where the CAN concept has been embraced.

In the present study, the photo-initiated copper-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization was utilized to form structurally diverse glassy polymer networks. Systematic alterations in the monomer backbone rigidity (e.g., cyclic or aliphatic groups with a different length of backbone) and the reactive functional group density (e.g., tetra-, tri-, di-, and mono-functional azide and alkyne monomers) were used to provide readily tailorable network structures with crosslink densities (estimated from the rubbery modulus) varying by a factor of over 20. All eight of the resultant networks exhibited glass transition temperatures (T(g)) between 50 and 80 °C with tensile toughness ranging from 28 to 61 MJ m(−3). A nearly linear dependence of yield stress and elongation at break (broadly defined as strength and ductility, respectively) on the T(g) and rubbery modulus was established in these triazole networks. When a flexible di-alkyne monomer (5 carbon spacing between alkynes) was incorporated in a network composed of a tri-alkyne and di-azide monomer, the elongation at break was improved from 166 to 300 %, while the yield stress was reduced from 36 to 23 MPa. Additionally, the polymer ductility was also varied by incorporating mono-functional azides as chain ends in the network - replacing a sterically hindered stiff mono-azide with a more flexible mono-azide increased the elongation at break from 24 to 185 % and the tensile toughness from 6 to 28 MJ m(−3).

International audience; Surface modifications are typically permanent in shape and chemistry. Herein, vinylogous urethane (VU) chemistry is presented as an easily accessible and versatile platform for rapid, facile, and reworkable surface modification. It is demonstrated that both physical and chemical post-modification of permanent, yet dynamic elastic polymer networks are achieved. Surface patterns with high regularity are created, both via a straightforward replication process using a polydimethylsiloxane stamp (resolution ca. 10-100 µm) as well as using thermally activated nano-imprint lithography (NIL) to form hole, pillar, or line patterns (ca. 300 nm) in elastic VU-based vitrimers. The tunable, rapid exchange allows patterning at 130 °C in less than 15 min, resulting in an increased water contact angle and surface-structure induced light reflection. Moreover, it is also demonstrated that the use of a single dynamic covalent chemistry makes it possible to strongly adhere to fluorinated and non-fluorinated materials based on incompatible matrices, causing cohesive failure in a peel test. In a topography scan, the visibly transparent interface is shown to possess a continuous phase without a gap, while maintaining distinctively separated (non)-fluorinated domains. Finally, this approach allowed for a straightforward coating of a non-fluorinated material with a fluorinated monomer to minimize the overall fluorinated content.

A covalent adaptable network (CAN) with high glass transition temperature (Tg ), superior mechanical properties including toughness and ductility, and unprecedented spatio-temporally controlled dynamic behavior is prepared by introducing dynamic moieties capable of reversible addition fragmentation chain transfer (RAFT) into photoinitiated copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC)-based networks. While the CuAAC polymerization yields glassy polymers composed of rigid triazole linkages with enhanced toughness, the RAFT moieties undergo bond exchange leading to stress relaxation upon light exposure. This unprecedented level of stress relaxation in the glassy state leads to numerous desirable attributes including glassy state photoinduced plasticity, toughness improvement during large deformation, and even photoinduced reversal of the effects of physical aging resulting in the rejuvenation of mechanical and thermodynamic properties in physically aged RAFT-CuAAC networks that undergo bond exchange in the glassy state. Surprisingly, when an allyl-sulfide-containing azide monomer (AS-N3 ) is used to form the network, the network exhibits up to 80% stress relaxation in the glassy state (Tg - 45 °C) under fixed displacement. In situ activation of RAFT during mechanical loading results in a 50% improvement in elongation to break and 40% improvement in the toughness when compared to the same network without light-activation of RAFT during the tensile testing.

The simultaneous delivery of multiple therapeutics to a single site has shown promise for cancer targeting and treatment. However, because of the inherent differences in charge and size between drugs and biomolecules, new approaches are required for colocalization of unlike components in one delivery vehicle. In this work, we demonstrate that triblock copolymers containing click nucleic acids (CNAs) can be used to simultaneously load a prodrug enzyme (cytosine deaminase, CodA) and a chemotherapy drug (doxorubicin, DOX) in a single polymer nanoparticle. CNAs are synthetic analogs of DNA comprised of a thiolene backbone and nucleotide bases that can hybridize to complementary strands of DNA. In this study, CodA was appended with complementary DNA sequences and fluorescent dyes to allow its encapsulation in PEG-CNA-PLGA nanoparticles. The DNA-modified CodA was found to retain its enzyme activity for converting prodrug 5-fluorocytosine (5-FC) to active 5-fluorouracil (5-FU) using a modified fluorescent assay. The DNA-conjugated CodA was then loaded into the PEG-CNA-PLGA nanoparticles and tested for cell cytotoxicity in the presence of the 5-FC prodrug. To study the effect of coloading DOX and CodA within a single nanoparticle, cell toxicity assays were run to compare dually loaded nanoparticles with nanoparticles loaded only with either DOX or CodA. We show that the highest level of cell death occurred when both DOX and CodA were simultaneously entrapped and delivered to cells in the presence of 5-FC.

Here, a process is introduced for forming dual stage thiol-Michael/acrylate hybrid networks photocured by two different wavelengths, demonstrating its use in nanoimprint lithography (NIL) and shape memory materials. Initiated with a visible light sensitive photobase and a UV-sensitive radical initiator, thiol-Michael-acrylate hybrid polymerizations were programmed to proceed sequentially and orthogonally, with base-catalyzed thiol-Michael photopolymerization as the first stage and radical mediated acrylate photopolymerization as the second stage. By regulating the photopolymerization formulations, i.e. thiol-to-acrylate ratios, initiator loadings and irradiation conditions, a series of materials with highly tunable mechanical performance was achieved, with ultimate T(g) values ranging from 23 to 70 °C. With a photopatternable first stage and a readily reconfigurable second stage, its implementation in nanoimprint lithography (NIL) enabled surface features on the scale of 10 nm to be formed on a photopatterned substrate. Additionally, the dual stage polymer results in a relatively homogenous polymer network with a narrow glass transition temperature (Tg), which enables rapid response in applications as shape memory materials, with shape-fixity values above 95% and shaperecovery values above 99%. With its unique photocuring process and programmable mechanical properties, the two color light controlled photopolymerization can be exploited as a useful tool in a wide range of materials science applications.

Polymers that possess dynamic covalent bonds activated at ambient conditions are ideal platforms for smart, responsive materials. Herein, a class of dynamic covalent polymerizations is developed based on the thiol-thioester exchange, that is, transthioesterification, reaction. Shifts in the equilibrium extent of the exchange reactions are deliberately utilized to drive the formation of oligomers and polymers. In particular, a series of AB and A

The extracellular matrix (ECM) constitutes a viscoelastic environment for cells. A growing body of evidence suggests that the behavior of cells cultured in naturally-derived or synthetic ECM mimics is influenced by the viscoelastic properties of these substrates. Adaptable crosslinking strategies provide a means to capture the viscoelasticity found in native soft tissues. In this work, we present a covalent adaptable hydrogel based on thioester exchange as a biomaterial for the in vitro culture of human mesenchymal stem cells . Through control of pH, gel stoichiometry , and crosslinker structure, viscoelastic properties in these crosslinked networks can be modulated across several orders of magnitude. We also propose a strategy to alter these properties in existing networks by the photo-uncaging of the catalyst 4-mercaptophenylacetic acid. Mesenchymal stem cells encapsulated in thioester hydrogels are able to elongate in 3D and display increased proliferation relative to those in static networks.

Kinetic parameters and their influence on the overall rates of base-catalyzed thiol–Michael reactions proceeding via an alternating propagation and chain transfer cycle were evaluated. A kinetic model was developed that enables the determination and accurate prediction of the reaction kinetic paths for the thiol–Michael addition reaction and its accompanying polymerization. Individual kinetic parameters for propagation and chain transfer steps were evaluated for three commonly used thiol and vinyl functional monomers. Chain transfer and propagation kinetic parameters were determined in binary combinations of monomers from analysis of experimental data for the reaction rates. Subsequently, eight ternary thiol–Michael systems composed of thiol–acrylate–vinyl sulfone and thiol 1-thiol 2-vinyl were analyzed based on the binary kinetic model parameters. It was clearly demonstrated that the kinetic parameters determined from the binary reactions enabled an accurate prediction of the relative reactivity and sele...

Classical materials readily switch phases (solid to fluid or fluid to gas) upon changes in pressure or heat; however, subsequent reversion of the stimulus returns the material to their original phase. Covalently cross-linked polymer networks, which are solids that do not flow when strained, do not change phase even upon changes in temperature and pressure. However, upon the addition of dynamic cross-links, they become stimuli responsive, capable of switching phase from solid to fluid, but quickly returning to the solid state once the stimulus is removed. Reported here is the first material capable of a bistable switching of phase. A permanent solid to fluid transition or vice versa is demonstrated at room temperature, with inherent, spatiotemporal control over this switch in either direction triggered by exposure to light., Polymers cross-linked with dynamic bonds can switch the phase from solid to fluid upon stimulus but return quickly to the solid state once the stimulus is removed. Here the authors report a light triggered permanent solid to fluid transition at room temperature with inherent spatiotemporal control in either direction

In this contribution, three o-nitrobenzyl-based photobase systems were synthesized and evaluated for visible light initiated thiol-Michael addition polymerizations. With a modified structure, the (3,4-methylenedioxy-6-nitrophenyl)-propyloxycarbonyl (MNPPOC) protected base performance exceeds that of the nonsubstituted 2-(2-nitrophenyl)-propyloxycarbonyl (NPPOC) protected base and an ITX sensitized photobase system, with respect to both long-wavelength light sensitivity and photolytic efficiency. In material synthesis, MNPPOC-TMG is capable of initiating photo thiol-Michael polymerization efficiently and orthogonally with only limited visible light exposure and generating a highly homogeneous cross-linked polymer network. This approach enables the thiol-Michael “click” reaction to be conducted with a low-energy, visible light irradiation and, thus, expands its applications in biocompatible and UV sensitive materials.

OBJECTIVE: For the past several decades, the resins used in dental restorations have been plagued with numerous problems, including their implication in biofilm formation and secondary caries. The need for alternative resins is critical, and evaluation of biofilm formation on these resins is essential. The aim of this study was to evaluate in vitro biofilm formation on the surface of novel copper (I)-catalyzed azide-alkyne cycloaddition (CuAAC)-based resins and composites. METHODS: CuAAC-based resins/composites made from varying azide monomers and different copper concentrations were compared with BisGMA-TEGDMA resins/composites that served as the control. Biofilms were formed using a mono-species model containing a luciferase-expressing strain of Streptococcus mutans. Luciferase activity was measured and the number of viable bacteria was enumerated on biofilms associated with each resin and composite. RESULTS: A significant reduction (p < 0.05) in luciferase activity, and the number of viable bacteria recovered from biofilms on CuAAC-based resins and composites was observed in comparison to biofilms associated with the BisGMA-TEGDMA controls. SIGNIFICANCE: CuAAC-based resins do still allow for the formation of biofilms; however, the statistically significant reduction of growth that was associated with the CuAAC resin may enhance the longevity of restorations that incorporate CuAAC-based materials.

The effect of amines on the kinetics and efficacy of radical-mediated thiol-ene coupling (TEC) reactions was investigated. By varying the thiol reactant and amine additive, it was shown that amines retard thiyl radical-mediated reactions when the amine is adequately basic enough to deprotonate the thiol affording the thiolate anion, e.g., when the weakly basic amine tetramethylethylenediamine was incorporated in the TEC reaction between butyl 2-mercaptoacetate and an allyl ether at 5 mol %, the final conversion was reduced from quantitative to

The synthesis, characterization, and post-synthetic functionalization of a readily functionalized step-growth linear polymer derived from divinyl sulfone (DVS) and tert-butylcarbazate (TBC) is presented. Construction of this atom-economic polymer under thermal conditions proceeds in high yield (>94%) at 75 °C, achieving a number average molecular weight of 17.0 kDa, a weight-average molecular weight of 26.2 kDa, and a polydispersity of 1.54, corresponding to a number-average degree of polymerization >60, despite the step-growth nature of the reaction. Removal of the Boc-groups yields a polymeric scaffold with hydrazine moieties that are readily reacted with aldehydes to yield the corresponding functional polyhydrazone materials. A variety of hydrazone-linked functionalities are readily added under mild conditions, including cationic, anionic, electron-rich/poor, and hetereoatom-containing aromatics. Owing to its rapid functionalization and simple and scalable synthesis, this material is an accommodating and generalized polymer scaffold that is rapidly tailored to a variety of applications with easily introduced functionality.

The exchange of thiolates and thiols has long been held as a nearly ideal reaction in dynamic covalent chemistry. The ability for the reaction to proceed smoothly in neutral aqueous media has propelled its widespread use in biochemistry, however, far fewer applications and studies have been directed towards its use in material science which primarily is performed in organic media. Herein, we present the exploration of this dynamic exchange in both small molecule and polymer settings with a wide sampling of thiols, thioesters, organic bases, and nucleophilic catalysts in various organic solvents. Effects of the character of the thiol and thioester, pKa or nucleophilicity of the catalyst, and heat on the reaction were investigated. The mechanism regarding the previously unexplored effectiveness of nucelophilic catalysts, such as quinuclidine or DABCO, to affect the thiol-thioester exchange was also explored. Finally, the use of the thiol-thioester exchange in a network polymer to reduce applied stresses or change shape of the material following polymerization was shown and the ability of basic and nucleophilic catalysts to promote these effects were benchmarked. The influence of polarity in these networks was also explored, with the rate of exchange shown to be easily tuned by the addition of diluents with varying polarities. Presented here is a so-called “user's guide” to the thiol-thioester exchange; we hope that this guide is instructive to practitioners in the field of material science which seek to utilize the thiol-thioester exchange in both linear and network polymers.

We demonstrate a class of rapidly photopolymerizable step-growth cross-linked networks that incorporate thioesters into the backbone. The thioester functional groups enable complete degradation of the network into oligomers that can subsequently be recycled into a nearly indistinguishable material with no change in material behavior.

Multifunctional vinyl sulfonates and vinyl sulfonamides were conveniently synthesized and assessed in thiol-Michael crosslinking polymerizations. The monomer reactivities, mechanical behavior and hydrolytic properties were analyzed and compared with those of analogous thiol-acrylate polymerizations. Materials with a broad range of mechanical properties and diverse hydrolytic stabilities were obtained.

Reconfiguring the permanent shape of elastomeric microparticles has been impossible due to the incapability of plastic deformation in these materials. To address this limitation, we synthesize the first instance of microparticles comprising a covalent adaptable network (CAN). CANs are cross-linked polymer networks capable of reconfiguring their network topology, enabling stress relaxation and shape changing behaviors, and reversible addition–fragmentation chain transfer (RAFT) is the corresponding dynamic chemistry used in this work to enable CAN-based microparticles. Using nanoimprint lithography to apply controllable deformations we demonstrate that upon light stimulation microparticles are able to reconfigure their shape to permanently fix large aspect ratios and nanoscale surface topographies.

This chapter explores polymers that are capable of degrading to smaller components under physiologically relevant conditions or upon exposure to specific stimuli. Such polymers have been used in a wide range of biomaterials, spanning from sutures to drug delivery devices to orthopedic implants. Key definitions and concepts relating to biodegradation and resorption are explained, after which more details on different classes of degradable polymers are discussed. The properties of such polymers that affect their degradation are detailed to give readers a better understanding of the tunability of biodegradation. While this chapter largely focuses on hydrolytically degradable polymers and the kinetics of hydrolytic degradation, polymers that are degraded by other stimuli (e.g., enzymes, light) are also highlighted. Beyond the polymer structure, the effects of processing on degradation are discussed to emphasize the many different considerations that must be taken into account when designing a new degradable biomaterial. Several worked examples and case studies are provided to reinforce concepts relating to biodegradable and resorbable polymers.

Objective To assess the performance of thiol Michael photocurable composites based on ester-free thiols and vinyl sulfonamides of varying monomer structures and varied filler loadings and to contrast the properties of the prototype composites with conventional BisGMA-TEGDMA methacrylate composite. Methods Synthetic divinyl sulfonamides and ester-free tetrafunctional thiol monomers were utilized for thiol-Michael composite development with the incorporation of thiolated microfiller. Polymerization kinetics was investigated using FTIR spectroscopy. Resin viscosities were assessed with rheometry. Water uptake properties were assessed according to standardized methods. Thermomechanical properties were analyzed by dynamic mechanical analysis. Flexural modulus/strength and flexural toughness were measured on a universal testing machine in three-point bending testing mode. Results The vinyl sulfonamide-based thiol-Michael resin formulation demonstrated a wide range of viscosities with a significant increase in the functional group conversion when compared to the BisGMA-TEGDMA system. The two different types of vinyl sulfonamide under investigation demonstrated significant differences towards the water sorption. Tertiary vinyl sulfonamide did not undergo visible swelling whereas the secondary vinyl sulfonamide composite swelled extensively in water. With the introduction of rigid monomer into the polymer matrix the glass transition temperature increased and so increased the toughness. Glassy thiol-Michael composites were obtained by ambient curing. Significance Employing the newly developed step-growth thiol-Michael resins in dental composites will provide structural uniformity, improved stability and lower water sorption.

Biofabrication allows for the templating of structural features in materials on cellularly-relevant size scales, enabling the generation of tissue-like structures with controlled form and function. This is particularly relevant for growing organoids, where the application of biochemical and biomechanical stimuli can be used to guide the assembly and differentiation of stem cells and form architectures similar to the parent tissue or organ. Recently, ablative laser-scanning techniques was used to create 3D overhang features in collagen hydrogels at size scales of 10–100 µm and supported the crypt-villus architecture in intestinal organoids. As a complementary method, providing advantages for high-throughput patterning, we printed thioester functionalized poly(ethylene glycol) (PEG) elastomers using digital light processing (DLP) and created sacrificial, 3D shapes that could be molded into soft (G′ < 1000 Pa) hydrogel substrates. Specifically, three-arm 1.3 kDa PEG thiol and three-arm 1.6 kDa PEG norbornene, containing internal thioester groups, were photopolymerized to yield degradable elastomers. When incubated in a solution of 300 mM 2-mercaptoethanol (pH 9.0), 1 mm thick 10 mm diameter elastomer discs degraded in µm, resolutions of 22 ± 5 µm, and overhang structures as small as 50 µm, were printed on the order of minutes. These sacrificial thioester molds with physiologically relevant features were cast-molded into Matrigel and subsequently degraded to create patterned void spaces with high fidelity. Intestinal stem cells (ISCs) cultured on the patterned Matrigel matrices formed confluent monolayers that conformed to the underlying pattern. DLP printed sacrificial thioester elastomer constructs provide a robust and rapid method to fabricate arrays of 3D organoid-sized features in soft tissue culture substrates and should enable investigations into the effect of epithelial geometry and spacing on the growth and differentiation of ISCs.

A new addition-fragmentation chain transfer (AFT) capable moiety was incorporated into a dimethacrylate monomer that participated readily in network formation by copolymerizing with multifunctional methacrylates or acrylates. The process of AFT occurred simultaneously with photopolymerization of the AFT monomer (AFM) and other (meth)acrylate monomers leading to polymer stress relaxation via network reconfiguration. At low loading levels of the AFM, a significant reduction in shrinkage stress, especially for acrylate monomers, was observed with nominal effects on conversion. At higher loading levels of the AFM, the photopolymerization reaction kinetics and final double bond conversion were significantly lowered along with a delay in the gel-point conversion. Electron paramagnetic resonance studies during polymerization revealed the presence of a distinct radical species that was present in proportional quantities to the AFM content in the system. The lifetime and the character of the persistent radicals were altered due to the presence of the distinctive radical, in turn affecting the polymerization kinetics. With polymerization conducted at higher irradiance, the differential conversion between the control resin and samples with moderate AFM content was minimal, especially for the methacrylate-based formulations.

We report the synthesis of polymeric particles using radical mediated step-growth thiol-ene and thiol-yne ‘click’ dispersion polymerizations in alcoholic solvents. Various alkene, alkyne and thiol monomers were used, and thermal, photo- or redox initiation methods were all shown to be effective means to initiate polymerization. Polymer particles typically were formed with diameters in the range of several hundred nanometers, with narrow size distributions though broader than typical free-radical chain-growth dispersion polymerizations. Photoinitiation yielded the smallest sizes due to the rapid nucleation of particles as compared to redox and thermal initiation methods. Reaction kinetics were monitored by FT-IR spectroscopy for aliquot samples taken at various reaction durations. The reaction achieved full conversion in photoinitiated systems within five minutes, while it took three hours for both thermal and redox initiation to be completed. The effects of polymerization conditions on particle size particularly the impact of monomer, stabilizer, and initiator concentrations were studied. Generally, average particle size increased with higher monomer concentration and decreased with additional stabilizer or initiator. Combinations of monomers with varying number of functional groups were investigated to form particles of various mechanical and physical behavior, including both linear and crosslinked systems.

We demonstrate the formation of shape-programmed, glassy origami structures using a single-layer photopolymer with two mechanically distinct phases. The latent origami pattern consisting of rigid, high cross-link density panels and flexible, low cross-link density creases is fabricated using a series of photomask exposures. Strong optical absorption of the polymer formulation creates depth-wise gradients in the cross-link density of the creases, enforcing directed folding which enables programming of both mountain and valley folds within the same sheet. These multiple photomask patterns can be sequentially applied because the sheet remains flat until immersed into a photopolymerizable monomer solution that differentially swells the polymer to fold and form the origami structure. After folding, a uniform photoexposure polymerizes the absorbed solution, permanently fixing the shape of the folded structure while simultaneously increasing the modulus of the folds. This approach creates sharp folds by mimicking the stiff panels and flexible creases of paper origami while overcoming the traditional trade-off of self-actuated materials that require low modulus for folding and high modulus for mechanical robustness. Using this process, we demonstrate a waterbomb base capable of supporting 1500 times its own weight.

Synthetic vesicles have a wide range of applications from drug and cosmetic delivery to artificial cell and membrane studies, making simple and controlled formation of vesicles a large focus of the field today. Here, we report the use of the photoinitiated copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction using visible light to introduce spatiotemporal control into the formation of vesicles. Upon the establishment of the spatiotemporal control over vesicle formation, it became possible to adjust initiation conditions to modulate vesicle sizes resulting in the formation of controllably small or large vesicles based on light intensity or giant vesicles when the formation was initiated in flow-free conditions. Additionally, this photoinitiated method enables vesicle formation at a density 400-fold higher than initiation using sodium ascorbate as the catalyst. Together, these advances enable the formation of high-density, controlled size vesicles using low-energy wavelengths while producing enhanced control over the formation characteristics of the vesicle.

Remote transport of material is an utmost useful, but challenging, property expanding the design possibilities of many applications such as microfluidics or robotics where species can be carried without interfering with its environment. Nature has solved the problem of transport in e.g., the respiratory system by a concerted motion of cilia. This study addresses a new method to fabricate an array of small parallel fibers acting as cilia placed side by side on a substrate. The fibers consist of a crosslinked liquid crystal main chain polymer functionalized with coreactant azobenzene molecules. The fibers bend toward a light source in a concerted manner. When placed in a liquid, the cooperative bending motion of the fibers creates a flow able to efficiently carry objects. The proposed fabrication process of the fibers is scalable to large area and requires an optimized rheology which is achieved by converting low molecular weight reactive liquid crystal acrylate monomers to oligomers using a multiplication of the monomeric units by the Michael addition reaction with dithiol. The oligomer properties and the elasticity of the fibers are adjusted by changing the thiol spacer leading to optimized manufacturing and maximized optical response.