Search

The accumulation of salts in building stones can lead to weathering features such as scaling, sanding or even slab detachment. To detect salts in walls at the early stages and to predict their evolution, the non-destructive technique (NDT) Infrared Thermography (IRT) was tested in a stimulated way. The main objective was to trial this technique in order to obtain more information such as the type of salt, its precise location and its concentration in building stones. Three building materials were studied, including two natural limestones and a reconstituted stone. Samples were submitted to immersion/drying tests in water and in salt solutions of Na2SO4, NaCl and MgSO4 at 7%, 14% and 26% in weight during 20 cycles of 24 h. The weight of the samples and the surface colour were recorded after each cycle. After 1, 5, 10 and 15 cycles, 3 samples were taken out for active IRT measurements. The results showed that when the porosity and the capillarity are low, the intake of salts into the porous network is low and the thermal response of the stone to heating (ΔTmax) corresponds to the salt thermal signature and has no relation with concentration. On the other hand, when the initial porosity is high, salts crystallize inside the porous network and porosity decreases. Hence, the thermal response of the porous stone is related to salt concentration and the ΔTmax increases until the stone starts to disaggregate. Active IRT is a promising NDT adapted to identify and quantify salts within building stones during the first states of accumulation.

International audience; To assess the influence of the composition of dissolved organic matter (DOM) on metal speciation, two models have been used: Model VI and NICA-Donnan. The speciation of Cu, Ni, Pb and Zn in the soil solution of 36 samples characterized by alkaline pH and different contamination levels has been determined. Four assumptions about DOM composition have been tested: (i) 100% of humic substances (HS) are fulvic acids (FA), (ii) 100% are humic acids (HA), (iii) 35% are HA and 65% FA and (iv) 84% are HA and 16% FA. The results obtained with the two distinct models are of the same order of magnitude; however, few differences have been highlighted regarding the description of the non-specific interactions, the Zn–FA interactions and the lowest free ion concentrations. The main result of this study is that the free ion concentrations calculated with the two models may differ by one order of magnitude depending on whether HA and/or FA are used to represent DOM. This work demonstrates the impact of the assumptions made about the DOM nature for metal speciation modelling.

Trace element (TE) speciation modelling in soil solution is controlled by the assumptions made about the soil solution composition. To evaluate this influence, different assumptions using Visual MINTEQ were tested and compared to measurements of free TE concentrations. The soil column Donnan membrane technique (SC-DMT) was used to estimate the free TE (Cd, Cu, Ni, Pb and Zn) concentrations in six acidic soil solutions. A batch technique using DAX-8 resin was used to fractionate the dissolved organic matter (DOM) into four fractions: humic acids (HA), fulvic acids (FA), hydrophilic acids (Hy) and hydrophobic neutral organic matter (HON). To model TE speciation, particular attention was focused on the hydrous manganese oxides (HMO) and the Hy fraction, ligands not considered in most of the TE speciation modelling studies in soil solution. In this work, the model predictions of free ion activities agree with the experimental results. The knowledge of the FA fraction seems to be very useful, especially in the case of high DOM content, for more accurately representing experimental data. Finally, the role of the manganese oxides and of the Hy fraction on TE speciation was identified and, depending on the physicochemical conditions of the soil solution, should be considered in future studies.

The reconstituted stone used in the Orval Abbey is highly susceptible to salt weathering. It was produced from debris of natural stones (which were at that time in short supply) by craftsmen working in the Abbey and its composition is highly variable. The major salt involved in weathering is sodium sulfate (Na2SO4). This study focused on the thermal behavior of a reconstituted stone with various degrees of weathering observed on-site and it was studied by passive and active infrared thermography (IRT), and on the evolution of reconstituted-stone samples in a salt uptake experiment in the laboratory. On-site, the thermal responses of salt-weathered and unweathered zones were different. IRT allowed to detect unweathered though highly salt-laden zones, although correlations between thermal response and salt concentration are difficult to establish due to the influence of surface properties (color and roughness). In the laboratory, samples of the reconstituted stone were submitted to successive immersion-drying cycles in solutions of Na2SO4 with 7, 14 and 26 % concentration and characterized by weighing, surface colorimetry and active IRT. Results showed that the thermal response (increase in surface temperature due to flash excitation: T max) increased with salt concentration and with the number of cycles, as long as sample disintegration had not started. Then, it decreased and stabilized, whatever the salt concentration. Those results indicated that an increase in the thermal response of building materials (in active IRT) can be interpreted as an indicator of salt accumulation, possibly leading to damage. IRT proved to be an interesting non-destructive technique in this respect.

In grapevine, stimulation of defence responses was evidenced in response to various types of abiotic stresses in both leaves and berries, as revealed by the increasing expression of genes encoding defence-related proteins or the stimulation of their corresponding activities. However, the capability of inflorescences to respond to abiotic stresses has never been investigated. Therefore, plant defence reactions in response to UV-C irradiation were followed in inflorescences and young clusters focusing on both bunchstems (peduncle and pedicels) and developing flowers/berries from separated floral buds stage [Biologische Bundesanstalt, Bundessortenamt and CHemical industry (BBCH) stage 57] to groat-sized berries stage (BBCH 73). For this purpose, the expression of various genes coding for pathogenesis-related (PR) proteins (class I and III chitinases, Chi1b and CH3; beta-1,3-glucanase, GLUC), an enzyme of the phenylpropanoid pathway (phenylalanine ammonia-lyase, PAL), and stilbene synthase (STS) was analysed in parallel with variations of chitinase activity and the accumulation of the phytoalexin resveratrol. Multiple defence responses were induced in bunchstems of both inflorescences and clusters following UV-C treatment. First, expression of genes encoding PR proteins was stimulated and chitinase activity was enhanced. Secondly, PAL and STS expression increased in association with resveratrol accumulation. Amazingly, none of the tested defence processes was induced in grapevine flowers following UV-C exposure, whatever the stage analysed. Similarly, in berries at fruit set, induction of gene expression was weak and neither an increase in chitinase activity nor resveratrol synthesis was noticed. However, in groat-sized berries, responsiveness to UV-C increased, as revealed by the induction of CH3, PAL, and STS expression, together with resveratrol accumulation. The differential responsiveness between bunchstems, flowers, and berries is discussed.

Stilbenic compounds recently have become the focus of a number of studies in medicine and plant physiology as well as have emerged as promising molecules that potentially affect human health. Stilbenes are relatively simple compounds synthesized by plants and deriving from the phenyalanine/polymalonate route, the last and key enzyme of this pathway being stilbene synthase. Here, we review the biological significance of stilbenes in plants together with their biosynthesis pathway and their metabolism both by fungi and in planta. Special attention will be paid to the role of stilbenic molecules as phytoalexins.

The grapevine phytoalexin resveratrol, the synthesis of which is achieved by stilbene synthase (STS), displays a wide range of biological effects. Most interest has centred, in recent years, on STS gene transfer experiments from grapevine to the genome of numerous plants. This work presents a comprehensive review on plant molecular engineering with the STS gene. Gene and promoter options are discussed, namely the different promoters used to drive the transgene, as well as the enhancer elements and/or heterologous promoters used to improve transcriptional activity in the transformed lines. Factors modifying transgene expression and epigenetic modifications, for instance transgene copy number, are also presented. Resveratrol synthesis in plants, together with that of its glucoside as a result of STS expression, is described, as is the incidence of these compounds on plant metabolism and development. The ectopic production of resveratrol can lead to broad-spectrum resistance against fungi in transgenic lines, and to the enhancement of the antioxidant activities of several fruits, highlighting the potential role of this compound in health promotion and plant disease control.