Search

Although great progress has been made in artificial enzyme engineering, their catalytic performance is far from satisfactory as alternatives of natural enzymes. Here, we report a novel and efficient strategy to access high-performance nanozymes via direct atomization of platinum nanoparticles (Pt NPs) into single atoms by reversing the thermal sintering process. Atomization of Pt NPs into single atoms makes metal catalytic sites fully exposed and results in engineerable structural and electronic properties, thereby leading to dramatically enhanced enzymatic performance. As expected, the as-prepared thermally stable Pt single-atom nanozyme (PtTS-SAzyme) exhibited remarkable peroxidase-like catalytic activity and kinetics, far exceeding the Pt nanoparticle nanozyme. The following density functional theory calculations revealed that the engineered P and S atoms not only promote the atomization process from Pt NPs into PtTS-SAzyme but also endow single-atom Pt catalytic sites with a unique electronic structure owing to the electron donation of P atoms, as well as the electron acceptance of N and S atoms, which simultaneously contribute to the substantial enhancement of the enzyme-like catalytic performance of PtTS-SAzyme. This work demonstrates that thermal atomization of the metal nanoparticle-based nanozymes into single-atom nanozymes is an effective strategy for engineering high-performance nanozymes, which opens up a new way to rationally design and optimize artificial enzymes to mimic natural enzymes.

Proton-exchange membrane fuel cells (PEMFCs) are a promising new energy-conversion technology due to their safe and environmentally friendly characteristics in a wide range of operating conditions. However, catalysis of the acidic oxygen reduction reaction (ORR) at the cathode is the main obstacle. In this regard, platinum-free single-atomic-site catalysts (SACs) with designable active sites are a potential solution. Unlike catalysts for the ORR in alkaline media that have been widely explored, there is still a gap between the performance of SACs and Pt-based catalysts in acidic media. In this review, we introduce the latest progress of SACs in acidic ORR. SACs consist of metal centers and substrates. We conclude controllable synthetic strategies for SACs from single-atomic sites and substrate design, discuss the relationship between the structure of single-atom sites and acidic ORR performance of SACs at the atomic level, and propose challenges and perspectives of SACs in acidic ORR.

Developing artificial enzymes with the excellent catalytic performance of natural enzymes has been a long-standing goal for chemists. Single-atom catalysts with well-defined atomic structure and electronic coordination environments can effectively mimic natural enzymes. Here, we report an engineered FeN3P-centred single-atom nanozyme (FeN3P-SAzyme) that exhibits comparable peroxidase-like catalytic activity and kinetics to natural enzymes, by controlling the electronic structure of the single-atom iron active centre through the precise coordination of phosphorus and nitrogen. In particular, the engineered FeN3P-SAzyme, with well-defined geometric and electronic structures, displays catalytic performance that is consistent with Michaelis–Menten kinetics. We rationalize the origin of the high enzyme-like activity using density functional theory calculations. Finally, we demonstrate that the developed FeN3P-SAzyme with superior peroxidase-like activity can be used as an effective therapeutic strategy for inhibiting tumour cell growth in vitro and in vivo. Therefore, SAzymes show promising potential for developing artificial enzymes that have the catalytic kinetics of natural enzymes. Nanozymes can provide cost and stability advantages over natural enzymes, but they usually display low catalytic activity and inferior kinetics. Now, a highly active nanozyme is developed that shows comparable kinetics to horseradish peroxidase in the oxidation of a commonly used artificial substrate.

Regulating the selectivity of catalysts in selective hydrogenation reactions at the atomic level is highly desirable but remains a grand challenge. Here we report a simple and practical strategy to synthesize a monolithic single-atom catalyst (SAC) with isolated Pd atoms supported on bulk nitrogen-doped carbon foams (Pd-SAs/CNF). Moreover, we demonstrate that the single-atom Pd sites with unique electronic structure endow Pd-SAs/CNF with an isolated site effect, leading to excellent activity and selectivity in 4-nitrophenylacetylene semi-hydrogenation reaction. In addition, benefiting from the great integrity and excellent mechanical strength, monolithic Pd-SAs/CNF catalyst is easy to separate from the reaction system for conducting the subsequent recycling. The cyclic test demonstrates the excellent reusability and stability of monolithic Pd-SAs/CNF catalyst. The discovery of isolated site effect provides a new approach to design highly selective catalysts. And the development of monolithic SACs provides new opportunities to advance the practical applications of single-atom catalysts.

The electrochemical CO2 reduction reaction (CO2RR) is viewed as a promising way to remove the greenhouse gas CO2 from the atmosphere and convert it into useful industrial products such as methane, methanol, formate, ethanol, and so forth. Single-atom site catalysts (SACs) featuring maximum theoretical atom utilization and a unique electronic structure and coordination environment have emerged as promising candidates for use in the CO2RR. The electronic properties and atomic structures of the central metal sites in SACs will be changed significantly once the types or coordination environments of the central metal sites are altered, which appears to provide new routes for engineering SACs for CO2 electrocatalysis. Therefore, it is of great importance to discuss the structural regulation of SACs at the atomic level and their influence on CO2RR activity and selectivity. Despite substantial efforts being made to fabricate various SACs, the principles of regulating the intrinsic electrocatalytic performances of the single-atom sites still needs to be sufficiently emphasized. In this perspective article, we present the latest progress relating to the synthesis and catalytic performance of SACs for the electrochemical CO2RR. We summarize the atomic-level regulation of SACs for the electrochemical CO2RR from five aspects: the regulation of the central metal atoms, the coordination environments, the interface of single metal complex sites, multi-atom active sites, and other ingenious strategies to improve the performance of SACs. We highlight synthesis strategies and structural design approaches for SACs with unique geometric structures and discuss how the structure affects the catalytic properties., Electrochemical CO2 reduction reaction (CO2RR) is a promising way to remove CO2 and convert it into useful industrial products. Single-atom site catalysts provide opportunities to regulate the active sites of CO2RR catalysts at the atomic level.

Single-atom catalysts not only maximize metal atom efficiency, they also display properties that are considerably different to their more conventional nanoparticle equivalents, making them a promising family of materials to investigate. Herein we developed a general host–guest strategy to fabricate various metal single-atom catalysts on nitrogen-doped carbon (M1/CN, M = Pt, Ir, Pd, Ru, Mo, Ga, Cu, Ni, Mn). The iridium variant Ir1/CN electrocatalyses the formic acid oxidation reaction with a mass activity of 12.9 $${{{\rm{A}}\,{\rm{mg}}^{-1}_{{\rm{Ir}}}}}$$ whereas an Ir/C nanoparticle catalyst is almost inert (~4.8 × 10−3 $${{{\rm{A}}\,{\rm{mg}}^{-1}_{{\rm{Ir}}}}}$$). The activity of Ir1/CN is also 16 and 19 times greater than those of Pd/C and Pt/C, respectively. Furthermore, Ir1/CN displays high tolerance to CO poisoning. First-principle density functional theory reveals that the properties of Ir1/CN stem from the spatial isolation of iridium sites and from the modified electronic structure of iridium with respect to a conventional nanoparticle catalyst. Single-atom catalysts maximize metal atom efficiency and exhibit properties that can be considerably different to their nanoparticle equivalent. Now a general host–guest strategy to make various single-atom catalysts on nitrogen-doped carbon has been developed; the iridium variant electrocatalyses the formic acid oxidation reaction with high mass activity and displays high tolerance to CO poisoning.

The solar-driven photocatalytic reduction of CO2 (CO2 RR) into chemical fuels is a promising route to enrich energy supplies and mitigate CO2 emissions. However, low catalytic efficiency and poor selectivity, especially in a pure-water system, hinder the development of photocatalytic CO2 RR owing to the lack of effective catalysts. Herein, we report a novel atom-confinement and coordination (ACC) strategy to achieve the synthesis of rare-earth single erbium (Er) atoms supported on carbon nitride nanotubes (Er1 /CN-NT) with a tunable dispersion density of single atoms. Er1 /CN-NT is a highly efficient and robust photocatalyst that exhibits outstanding CO2 RR performance in a pure-water system. Experimental results and density functional theory calculations reveal the crucial role of single Er atoms in promoting photocatalytic CO2 RR.

Manipulating metal atoms in a controllable way for the synthesis of materials with the desired structure and properties is the holy grail of chemical synthesis. The recent emergence of single atomic site catalysts (SASC) demonstrates that we are moving toward this goal. Owing to the maximum efficiency of atom-utilization and unique structures and properties, SASC have attracted extensive research attention and interest. The prerequisite for the scientific research and practical applications of SASC is to fabricate highly reactive and stable metal single atoms on appropriate supports. In this review, various synthetic strategies for the synthesis of SASC are summarized with concrete examples highlighting the key issues of the synthesis methods to stabilize single metal atoms on supports and to suppress their migration and agglomeration. Next, we discuss how synthesis conditions affect the structure and catalytic properties of SASC before ending this review by highlighting the prospects and challenges for the synthesis as well as further scientific researches and practical applications of SASC.

Background Although cyclin-dependent kinase inhibitor 2B antisense RNA 1 (CDKN2B-AS1) is upregulated in glioma, its function and potential mechanism in glioma remain unclear. Methods CDKN2B-AS1 level in glioma tissues and cell lines LN229, U251, and U87 was measured by qRT-PCR. Loss of function assays using short hairpin RNA for CDKN2B-AS1 (sh-CDKN2B-AS1) were performed to evaluate the effect of CDKN2B-AS1 on cell invasion, migration, proliferation, and apoptosis. The relationship among CDKN2B-AS1, miR-199a-5p, and DDR1 was determined by bioinformatics analysis and luciferase reporter assay. Rescue experiments were conducted to explore the function of CDKN2B-AS1 and miR-199a-5p in glioma. An in vivo animal model of lentivirally transduced U87 glioma xenografts in mice was established to confirm the role of CDKN2B-AS1. Results CDKN2B-AS1 is significantly upregulated in glioma tissues and cell lines. CDKN2B-AS1 knockdown significantly inhibits cell proliferation, invasion, and migration, while promotes apoptosis of glioma cell lines U251 and U87. Further, a miR-199a-5p inhibitor attenuates the inhibitory effects of sh-CDKN2B-AS1 on these cell phenotypes. CDKN2B-AS1 positively regulates DDR1 expression by directly sponging miR-199a-5p. Moreover, CDKN2B-AS1 knockdown efficiently inhibits U87 tumor xenograft growth in mice. Conclusion Our study reveals that CDKN2B-AS1 promotes glioma development by regulating the miR-199a-5p/DDR1 axis, suggesting that this lncRNA might be a potential therapeutic target.

It is highly desirable but challenging to optimize the structure of photocatalysts at the atomic scale to facilitate the separation of electron-hole pairs for enhanced performance. Now, a highly efficient photocatalyst is formed by assembling single Pt atoms on a defective TiO2 support (Pt1 /def-TiO2 ). Apart from being proton reduction sites, single Pt atoms promote the neighboring TiO2 units to generate surface oxygen vacancies and form a Pt-O-Ti3+ atomic interface. Experimental results and density functional theory calculations demonstrate that the Pt-O-Ti3+ atomic interface effectively facilitates photogenerated electrons to transfer from Ti3+ defective sites to single Pt atoms, thereby enhancing the separation of electron-hole pairs. This unique structure makes Pt1 /def-TiO2 exhibit a record-level photocatalytic hydrogen production performance with an unexpectedly high turnover frequency of 51423 h-1 , exceeding the Pt nanoparticle supported TiO2 catalyst by a factor of 591.

Here, we successfully developed nanostructured PtNi particles supported on nitrogen-doped carbon (NC), which were obtained by carbonization of metal-organic frameworks under different temperatures, forming the nano-PtNi/NC-600, nano-PtNi/NC-800, nano-PtNi/NC-900 and nano-PtNi/NC-1000 catalysts. For hydrosilylation of 1-octene, we found that the nano-PtNi/NC-1000 catalyst exhibits higher activity for anti-Markovnikov hydrosilylation of 1-octene than those of nano-PtNi/NC-600, nano-PtNi/NC-800, nano-PtNi/NC-900 catalysts. Experiments have verified that benefiting from obvious charge transfer from nano-PtNi particles to NC support carbonized at 1,000 °C, the nano-PtNi/NC-1000 catalyst achieved almost complete conversion and produce exclusive adduct for anti-Markovnikov hydrosilylation of 1-octene. Importantly, the nano-PtNi/NC-1000 catalyst exhibited good reusability for the hydrosilylation reaction. This work provides a new path to optimize electronic structure of catalysts by support modification to enhance electron transfer between metal active species and supports for highly catalytic performance.

Incorporating atomically dispersed metal species into functionalized metal-organic frameworks (MOFs) can integrate their respective merits for catalysis. A cage-controlled encapsulation and reduction strategy is used to fabricate single Ru atoms and triatomic Ru3 clusters anchored on ZIF-8 (Ru1 @ZIF-8, Ru3 @ZIF-8). The highly efficient and selective catalysis for semi-hydrogenation of alkyne is observed. The excellent activity derives from high atom-efficiency of atomically dispersed Ru active sites and hydrogen enrichment by the ZIF-8 shell. Meanwhile, ZIF-8 shell serves as a novel molecular sieve for olefins to achieve absolute regioselectivity of catalyzing terminal alkynes but not internal alkynes. Moreover, the size-dependent performance between Ru3 @ZIF-8 and Ru1 @ZIF-8 is detected in experiment and understood by quantum-chemical calculations, demonstrating a new and promising approach to optimize catalysts by controlling the number of atoms.

Atomic-level insight into the unique catalytic capability of single-atom catalysts that distinguished from nanometer-sized counterparts is highly desirable for catalyst design and catalysis research. By synthesizing single Pd atoms supported on TiO2 as a catalyst, here we demonstrate a steric hindrance effect of single atoms induced by the unique isolation of single-atom active sites to achieve a remarkable enhancement on catalytic performance in the synthesis of dimethyl carbonate. Experimental results and density functional theory calculations reveal that such steric hindrance effect of single atoms favors the yield of the desired product dimethyl carbonate against further reacting with intermediates to form byproduct, because no extra Pd species around single Pd atoms provide active sites to further adsorb and activate substrates directly. The discovery of such steric hindrance effect is a valuable supplement to single-atom catalysis, and may promote single-atom catalysts to be widely applied in selective catalytic reactions.

Demonstrated here is the correlation between atomic configuration induced electronic density of single-atom Co active sites and oxygen reduction reaction (ORR) performance by combining density-functional theory (DFT) calculations and electrochemical analysis. Guided by DFT calculations, a MOF-derived Co single-atom catalyst with the optimal Co1 -N3 PS active moiety incorporated in a hollow carbon polyhedron (Co1 -N3 PS/HC) was designed and synthesized. Co1 -N3 PS/HC exhibits outstanding alkaline ORR activity with a half-wave potential of 0.920 V and superior ORR kinetics with record-level kinetic current density and an ultralow Tafel slope of 31 mV dec-1 , exceeding that of Pt/C and almost all non-precious ORR electrocatalysts. In acidic media the ORR kinetics of Co1 -N3 PS/HC still surpasses that of Pt/C. This work offers atomic-level insight into the relationship between electronic density of the active site and catalytic properties, promoting rational design of efficient catalysts.

Here, we have developed a cobalt single-atom-site catalyst (Co1/P-NC). Benefiting from the unique properties of single atoms and ingenious support modification by atomic-level heteroatom nitrogen and phosphorus doping, the Co1/P-NC catalyst exhibited high activity and excellent selectivity for selective oxidation of primary alcohols.

Here we report a novel approach to synthesize atomically dispersed uniform clusters via a cage-separated precursor preselection and pyrolysis strategy. To illustrate this strategy, well-defined Ru3(CO)12 was separated as a precursor by suitable molecular-scale cages of zeolitic imidazolate frameworks (ZIFs). After thermal treatment under confinement in the cages, uniform Ru3 clusters stabilized by nitrogen species (Ru3/CN) were obtained. Importantly, we found that Ru3/CN exhibits excellent catalytic activity (100% conversion), high chemoselectivity (100% for 2-aminobenzaldehyde), and significantly high turnover frequency (TOF) for oxidation of 2-aminobenzyl alcohol. The TOF of Ru3/CN (4320 h–1) is about 23 times higher than that of small-sized (ca. 2.5 nm) Ru particles (TOF = 184 h–1). This striking difference is attributed to a disparity in the interaction between Ru species and adsorbed reactants.

The development of low-cost, efficient, and stable electrocatalysts for the oxygen reduction reaction (ORR) is desirable but remains a great challenge. Herein, we made a highly reactive and stable isolated single-atom Fe/N-doped porous carbon (ISA Fe/CN) catalyst with Fe loading up to 2.16 wt %. The catalyst showed excellent ORR performance with a half-wave potential (E1/2) of 0.900 V, which outperformed commercial Pt/C and most non-precious-metal catalysts reported to date. Besides exceptionally high kinetic current density (Jk) of 37.83 mV cm−2 at 0.85 V, it also had a good methanol tolerance and outstanding stability. Experiments demonstrated that maintaining the Fe as isolated atoms and incorporating nitrogen was essential to deliver the high performance. First principle calculations further attributed the high reactivity to the high efficiency of the single Fe atoms in transporting electrons to the adsorbed OH species.

The hydrosilylation reaction is one of the largest-scale application of homogeneous catalysis and is widely used to enable the commercial manufacture of silicon products. However, considerable issues including disposable platinum consumption, undesired side reactions and unacceptable catalyst residues still remain. Here, we synthesize a heterogeneous partially charged single-atom platinum supported on anatase TiO2 (Pt1δ+/TiO2) catalyst via an electrostatic-induction ion exchange and two-dimensional confinement strategy, which can catalyze hydrosilylation reaction with almost complete conversion and produce exclusive adduct. Density functional theory calculations reveal that unexpected property of Pt1δ+/TiO2 originates from atomic dispersion of active species and unique partially positive charge Ptδ+ electronic structure that conventional nanocatalysts do not possess. The fabrication of single-atom Pt1δ+/TiO2 catalyst accomplishes a reasonable use of Pt through recycling and maximum atom-utilized efficienc...

We successfully prepared Fe and Co isolated single atoms on metal-organic framework derived nitrogen-doped carbon (FeCo-ISAs/CN) by an adsorption-calcination strategy. The obtained FeCo-ISAs/CN exhibited top-level catalytic reactivity for the alkaline oxygen reduction reaction (ORR) with a half-wave potential of 0.920 V, which was 70 mV more positive than that of commercial Pt/C. Moreover, the catalyst was durable and showed negligible activity decay in the alkaline ORR during 5000 voltage cycles.

Efficient, durable and inexpensive electrocatalysts that accelerate sluggish oxygen reduction reaction kinetics and achieve high-performance are highly desirable. Here we develop a strategy to fabricate a catalyst comprised of single iron atomic sites supported on a nitrogen, phosphorus and sulfur co-doped hollow carbon polyhedron from a metal-organic framework@polymer composite. The polymer-based coating facilitates the construction of a hollow structure via the Kirkendall effect and electronic modulation of an active metal center by long-range interaction with sulfur and phosphorus. Benefiting from structure functionalities and electronic control of a single-atom iron active center, the catalyst shows a remarkable performance with enhanced kinetics and activity for oxygen reduction in both alkaline and acid media. Moreover, the catalyst shows promise for substitution of expensive platinum to drive the cathodic oxygen reduction reaction in zinc-air batteries and hydrogen-air fuel cells., Development of fuel cells and metal-air batteries is hindered by electrocatalyst performance, which can be enhanced with uniform and atomically dispersed active sites. Here the authors report an iron-based electrocatalyst for oxygen reduction in cathodes for a zinc-air battery and a hydrogen-air fuel cell.

By manipulating both the “stacking” and “carving” routes at the nanoscale, we successfully fabricated a class of Pt-based bimetallic NCs with defect-rich surface structures, which exhibited robust electrocatalytic performance toward both MOR and ORR compared with commercial Pt/C catalysts due to their abundant surface defects (high density of low-coordinated atoms such as steps, edges and kinked atoms).

The dimethyl ether to olefins process is very important for converting coal to chemicals. A SAPO-34 molecular sieve with a particle size up to 50 μm has been synthesized with morpholine as the template. The cold model fluidization experiment indicates that the SAPO-34 catalyst with average size of 45–50 μm is of good fluidization properties. After high temperature steam treatment at 1073 K for 8 h, this large fluidizable catalyst showed good reactivity and selectivity for the dimethyl ether to olefins (DTO) reaction in a micro-reactor. X-ray diffraction characterization showed that the structure of the catalyst was maintained well. A fluidized reactor of 50 mm inner diameter was used to carry out the DTO reaction, which showed that the fluidizable SAPO-34 is a selective catalyst for light olefin production.

Kinetic control of surface defects is achieved, and cubic, concave cubic, and defect-rich cubic intermetallic Pt3 Sn nanocrystals are prepared for the electro-oxidation of formic acid. The generality of this kinetic approach is demonstrated by the fabrication of Pt-Mn nanocrystals with different surface defects. The defect-rich nanocrystals exhibit high catalytic activity and stability concurrently, indicating their potential application in fuel cells.

In this work, we present a facile etching–reduction–selective epitaxial growth synergistic strategy to synthesize trimetallic nanocrystals. The methodology demonstrated here provides some general guidelines for the design and fabrication of multimetallic heteronanostructures, which would open up new opportunities for practical fuel cell applications or other chemical reactions.

By depositing Mg vapor generated via carbothermal reduction on boron powder in the presence of different additives, dumbbell-like MgO nanofibers, NaCl particle-decorated MgO nanofibers and camphor tree stalk-like MgO fibers were produced. SEM, TEM and EDS analysis showed that the additives of Si and NaCl deposited in the sites of stacking faults in fiber, which resulted in the growth of different morphologies of decorated fibers.

A novel morphology of SiOx (x=1–2) nanowires was fabricated via a thermal evaporation method by heating pure silicon powder at 1373 K followed by depositing silicon vapor on a quartz-glass substrate which was coated with a catalyst precursor from a 0.005 M Fe(NO3)3 aqueous solution. At the deposition temperature, the catalyst particles aggregated and formed quasi-plates, from which a short Si rod grew outward on one side and a great deal of SiOx nanowires projected outward on the other side, forming comet-like objects with long tails. The diameters of the nanowires gradually decreased with an increase in the distance from the catalyst plate.