Search

Supramolecular protein hydrogels with tunable properties represent promising candidates for advanced designer extracellular matrices (ECMs). To control cellular functions, ECMs should be able to spatiotemporally regulate synergistic signaling between transmembrane receptors and growth factor (GF) receptors. In this study, we developed genetically engineered temperature-responsive multifunctional protein hydrogels. The designed hydrogel was fabricated by combining the following four peptide blocks: thermosensitive elastin-like polypeptides (ELPs), a polyaspartic acid (polyD) chain to control aggregation and delivery of GFs, a de novo-designed helix peptide that forms antiparallel homotetrameric coiled-coils, and a biofunctional peptide. The resultant coiled-coil unit bound ELPs (CUBEs) exhibit a controllable sol-gel transition with tunable mechanical properties. CUBEs were functionalized with bone sialoprotein-derived RGD (bRGD), and human umbilical vein endothelial cells (HUVECs) were three-dimensionally cultured in bRGD-modified CUBE (bRGD-CUBE) hydrogels. Proangiogenic activity of HUVECs was promoted by bRGD. Moreover, heparin-binding angiogenic GFs were immobilized to bRGD-CUBEs via electrostatic interactions. HUVECs cultured in GF-tethered bRGD-CUBE hydrogels formed three-dimensional (3-D) tubulelike structures. The designed CUBE hydrogels may demonstrate utility as advanced smart biomaterials for biomedical applications. Further, the protein hydrogel design strategy may provide a novel platform for constructing designer 3-D microenvironments for specific cell types.

We developed a DNA-NanoLuc luciferase (NnaoLuc) conjugates for DNA aptamer-based sandwich assay using the catalytic domain of the replication initiator protein derived from porcine circovirus type 2 (pRep). For construction of DNA aptamer and NanoLuc conjugate using the catalytic domain of Rep from PCV2. pRep fused to NanoLuc was genetically constructed and expressed in E. coli. After purification, the activities of fused pRep and NanoLuc were evaluated, and DNA-NanoLuc conjugates were constructed via the fused pRep. Finally, constructed DNA-NanoLuc conjugates were applied for use in a DNA aptamer-based sandwich assay. Here, pRep was used not only for conjugation of the NanoLuc to the detection aptamer, but also for immobilization of the capture aptamer on the plate surface. We have demonstrated that DNA-NanoLuc conjugates via the catalytic domain of PCV2 Rep could be applied for DNA aptamer-based sandwich assay system.

Modification of protein-based drug carriers with tumor-targeting properties is an important area of research in the field of anticancer drug delivery. To this end, we developed nanoparticles comprised of elastin-like polypeptides (ELPs) with fused poly-aspartic acid chains (ELP-D) displaying DNA aptamers. DNA aptamers were enzymatically conjugated to the surface of the nanoparticles via genetic incorporation of Gene A* protein into the sequence of the ELP-D fusion protein. Gene A* protein, derived from bacteriophage ϕX174, can form covalent complexes with single-stranded DNA via the latter's recognition sequence. Gene A* protein-displaying nanoparticles exhibited the ability to deliver the anticancer drug paclitaxel (PTX), whilst retaining activity of the conjugated Gene A* protein. PTX-loaded protein nanoparticles displaying DNA aptamers known to bind to the MUC1 tumor marker resulted in increased cytotoxicity with MCF-7 breast cancer cells compared to PTX-loaded protein nanoparticles without the DNA aptamer modification.

We explored the co-localization of multiple enzymes on a DNA backbone via a DNA-binding protein, Gene-A* (A*-tag) to increase the efficiency of cascade enzymatic reactions. Firefly luciferase (FLuc) and pyruvate orthophosphate dikinase (PPDK) were genetically fused with A*-tag and modified with single-stranded (ss) DNA via A*-tag. The components were assembled on ssDNA by hybridization, thereby enhancing the efficiency of the cascading bioluminescent reaction producing light emission from pyrophosphate. The activity of A*-tag in each enzyme was investigated with dye-labeled DNA. Co-localization of the enzymes via hybridization was examined using a gel shift assay. The multi-enzyme complex showed significant improvement in the overall efficiency of the cascading reaction in comparison to a mixture of free enzymes. A*-tag is highly convenient for ssDNA modification of versatile enzymes, and it can be used for construction of functional DNA–enzyme complexes.

There is growing interest in the functional roles of the extracellular matrix (ECM) in regulating the fate of pluripotent stem cells (PSCs). An artificially bioengineered ECM provides an excellent model for studying the molecular mechanisms underlying self-renewal and differentiation of PSCs, without multiple unknown and variable factors associated with natural substrates. Here, we have engineered multifunctional fusion proteins that are based on peptides from laminin, including p20, RGD, and elastin-like polypeptide (ELP), where laminin peptides work as cell adhesion molecules (CAMs) and ELP to promote anchorage. The functionality of these chimeric proteins, referred to as ERE-p20 and E-p20, was assessed by determining their ability to immobilize cells on a hydrophobic polystyrene surface, improve mouse induced pluripotent stem cells (miPSCs) attachment, and promote miPSC differentiation to neural progenitors. ERE-p20 and E-p20 proteins showed hydrophobic binding saturation to the polystyrene plates around 500 nM (2.39 μg/cm2 ) and 750 nM (2.27 μg/cm2 ) protein concentrations, respectively. The apparent maximum cell binding to ERE-p20 and E-p20 was approximately 81% and 73%, respectively, relative to gelatin. For neural precursors, neurite outgrowth was enhanced by the presence of RGD and p20 peptides. The expression levels of neuronal marker protein MAP2 were upregulated approximately 2.5-fold and threefold by ERE-p20 and E-p20, respectively, relative to laminin. Overall, we have shown that elastin-mimetic fusion proteins consisting of p20 with and without RGD peptides are able to induce neuronal differentiation. In conclusion, our newly designed bioengineered fusion proteins allow preparation of specific bioactive matrices or coating/scaffold for miPSCs differentiation.

In this study, we developed a protein nanoparticle-based immunoassay to detect cancer biomarkers using a bioluminescent fusion protein. This method relies on the use of protein nanoparticles comprised of genetically-engineered elastin-like polypeptides (ELPs) fused with poly-aspartic acid tails (ELP-D), previously developed in our lab. The sizes of the self-assembled ELP-D nanoparticles can be regulated at the nanoscale by charged repulsion of the poly-aspartic acid chains. To improve the sensitivity of enzyme-linked immunosorbent assays (ELISAs), we herein demonstrate the multivalent display of NanoLuc® (Nluc) luciferase and a biotin acceptor peptide (BAP) on the surfaces of ELP-D nanoparticles, and demonstrate the sensitivity of these multivalent nanoparticles as detection probes. The fusion protein comprised of ELP-D and Nluc-BAP (ELP-D-Nluc-BAP) was found to form nanoparticles with Nluc and BAP displayed multivalently on their surfaces. Moreover, the use of the nanoparticles in ELISA resulted in a detection sensitivity for α-fetoprotein (AFP) about 10 times higher than that of an assay relying on the use of the monomeric version of the fusion protein. Taken together, ELP-D-based nanoparticles displaying multivalent luciferases on their surfaces enable the construction of an ELISA with enhanced sensitivity.

Three-dimensional (3D) printing is advantageous over conventional technologies for the fabrication of sophisticated structures such as 3D micro-channels for future applications in tissue engineering and drug screening. We aimed to apply this technology to cell-based assays using polydimethylsiloxane (PDMS), the most commonly used material for fabrication of micro-channels used for cell culture experiments. Useful properties of PDMS include biocompatibility, gas permeability and transparency. We developed a simple and robust protocol to generate PDMS-based devices using a soft lithography mold produced by 3D printing. 3D chemical gradients were then generated to stimulate cells confined to a micro-channel. We demonstrate that concentration gradients of growth factors, important regulators of cell/tissue functions in vivo, influence the survival and growth of human embryonic stem cells. Thus, this approach for generation of 3D concentration gradients could have strong implications for tissue engineering and drug screening.

Self-assembling peptides are attractive materials for tissue engineering applications because of their functionality including high biocompatibility and biodegradability. Modification of self-assembling peptides with functional motifs, such as the cell-adhesive tripeptide sequence RGD leads to functional artificial extracellular matrices (ECMs). In this study, we developed an artificial self-assembling ECM protein tethered with a growth factor via heterotrimer triple-helix (helix A/B/C) formation. The helix A and helix C peptides, which are capable of forming a heterodimer coiled-coil structure, were fused to both ends of a matrix protein composed of the elastin-derived structural unit (APGVGV)12 with an RGD motif. The helix B peptide, which constituents the third helix of the triple-helix structure, was fused with basic fibroblast growth factor (bFGF) for tethering to the artificial ECM proteins. Each recombinant protein exhibited cell adhesion and cell proliferation activities similar to the original, while the designed bFGF-tethered ECM protein exhibited superior cell proliferation activity. These results demonstrate that the approach of creating growth factor-tethered self-assembling proteins via triple-helix formation can be applied to develop functional ECMs for tissue engineering applications.