Search

Controlling the transmission of thin films with external stimuli is an important goal in functional optical materials and devices. Tuning is especially challenging where both broad band (neutral density filtering) and spectrally varied (colour) transmission are required. The external control provided by photochemically driven switching, between transmission levels and colours, is functionally simple from a device perspective. The limits due to the spectral ranges of individual photochromic compounds can be overcome by combining several photochromes within one material or device. Here we show that a combination of photochromic molecular switches immobilised in a PMMA polymer matrix enables tuning of colour and transparency. We show that only a single excitation wavelength is required through the use of the primary inner filter effect and the layered construction of the films in which the photochromes nitrospiropyran (NSP), and nitrothiospiropyran (TSP) or 1,2-bis-terthienyl-hexafluorocyclopentene (DTE) are separated spatially. The approach taken circumvents the need to match photochemical quantum yields and thermal reactivity of the component photochromes. The photochemical switching of the films was characterised by UV/vis absorption spectroscopy and shows that switching rates and photostationary states are limited by inner filter effects rather than the intrinsic properties of photochromes, such as photochemical quantum yields and thermal stability. The photochemical behaviour and stability of the photochromes in solution and in the PMMA films were compared and the concentration range over which self-inhibition of photochemical switching occurs was established. The rate of photochemical switching and the difference in transmission between the spiropyran and merocyanine forms in solution enable prediction of the performance in the films and enable rational design of colour tuning ranges and responsivity in thin film filters., A multilayer coating, with a different photochrome in each layer, enables predictable control over transmission and colour with a single wavelength of light, which is an important goal in functional optical materials and devices.

A multistable molecular switching system based on an anthracene-extended bis-thiaxanthylidene with three individually addressable states that can be interconverted by electrochemical, thermal, and photochemical reactions is reported. Besides reversible switching between an open-shell diradical- and a closed-shell electronic configuration, our findings include a third dicationic state and control by multiple actuators. This dicationic state with an orthogonal conformation can be switched electrochemically with the neutral open-shell triplet state with orthogonal conformation, which was characterized by EPR. The remarkably stable diradical shows kinetic stability as a result of a significant activation barrier for isomerization to a more stable neutral closed-shell folded geometry. We ascribe this activation barrier of ΔG‡(293 K) = 25.7 kcal mol-1 to steric hindrance in the fjord region of the overcrowded alkene structure. The folded closed-shell state can be converted back to the diradical state by irradiation with 385 nm. The folded state can also be oxidized to the dicationic state. These types of molecules with multiple switchable states and in particular stable diradicals show great potential in the design of new functional materials such as memory devices, logic gates, and OFETs.

The epoxidation of ethylene-propylene-diene rubber (EPDM) with 5-ethylidene-2-norbornene (ENB) as the diene to epoxidized EPDM (eEPDM) creates additional routes to cross-linking and reactive blending, as well as increasing the polarity and thereby the adhesion to polar materials, e.g., mineral fillers such as silica. The low solubility of apolar, high molecular weight polymers in the polar solvents constrains the catalytic method for epoxidation that can be applied. Here we have applied an in situ prepared catalyst comprising a manganese(ii) salt, sodium picolinate and a ketone to the epoxidation of EPDM rubber with hydrogen peroxide (H2O2) as the oxidant in a solvent mixture, that balances the need for polymer and catalyst/oxidant miscibility and solubility. Specifically, a mixture of cyclohexane and cyclohexanone is used, where cyclohexanone functions as a co-solvent as well as the ketone reagent. Reaction progress was monitored off-line through a combination of Raman and ATR-FTIR spectroscopies, which revealed that the reaction profile and the dependence on the composition of the catalyst are similar to those observed with low molar mass alkene substrates, under similar reaction conditions. The combination of spectroscopies offers a reliable method for off-line reaction monitoring of both the extent of the conversion of unsaturation (Raman) and the extent of epoxidation (FTIR) as well as determining side reactions, such as epoxide ring opening and further, aerobic oxidation. The epoxidation of EPDM described, in contrast to currently available methods, uses a non-scarce manganese catalyst and H2O2, and avoids side reactions, such as those that can occur with peracids.

The electrons that nature uses to reduce CO2 during photosynthesis come from water oxidation at the oxygen-evolving complex of photosystem II. Molecular catalysts have served as models to understand its mechanism, in particular the O-O bond-forming reaction, which is still not fully understood. Here we report a Ru(IV) side-on peroxo complex that serves as a 'missing link' for the species that form after the rate-determining O-O bond-forming step. The Ru(IV) side-on peroxo complex (eta(2)-1(IV)-OO) is generated from the isolated Ru(IV) oxo complex (1(IV)=O) in the presence of an excess of oxidant. The oxidation (IV) and spin state (singlet) of eta(2)-1(IV)-OO were determined by a combination of experimental and theoretical studies. O-18- and H-2-labelling studies evidence the direct evolution of O-2 through the nucleophilic attack of a H2O molecule on the highly electrophilic metal-oxo species via the formation of eta(2)-1(IV)-OO. These studies demonstrate water nucleophilic attack as a viable mechanism for O-O bond formation, as previously proposed based on indirect evidence.

Oxidized starch can be efficiently prepared using H2O2 as an oxidant and iron(III) tetrasulfophthalocyanine (FePcS) as a catalyst, with properties in the same range as those for commercial oxidized starches prepared using NaOCl. Herein, we performed an in-depth study on the oxidation of potato starch focusing on the mode of operation of this green catalytic system and its fate as the reaction progresses. At optimum batch reaction conditions (H2O2/FePcS molar ratio of 6000, 50 °C, and pH 10), a high product yield (91 wt %) was obtained with substantial degrees of substitution (DSCOOH of 1.4 and DSCO of 4.1 per 100 AGU) and significantly reduced viscosity (197 mPa·s) by dosing H2O2. Model compound studies showed limited activity of the catalyst for C6 oxidation, indicating that carboxylic acid incorporation likely results from C-C bond cleavage events. The influence of the process conditions on the stability of the FePcS catalyst was studied using UV-vis and Raman spectroscopic techniques, revealing that both increased H2O2 concentration and temperature promote the irreversible degradation of the FePcS catalyst at high pH. The rate and extent of FePcS degradation were found to strongly depend on the initial H2O2 concentration where also the rapid decomposition of H2O2 by FePcS occurs. These results explain why the slow addition of H2O2 in combination with low FePcS catalyst concentration is beneficial for the efficient application in starch oxidation.

Light-driven unidirectional molecular rotary motors have the potential to power molecular machines. Consequently, optimizing their speed and efficiency is an important objective. Here, we investigate factors controlling the photochemical yield of the prototypical unidirectional rotary motor, a sterically overcrowded alkene, through detailed investigation of its excited-state dynamics. An isoviscosity analysis of the ultrafast fluorescence decay data resolves friction from barrier effects and reveals a 3.4 ± 0.5 kJ mol-1 barrier to excited-state decay in nonpolar media. Extension of this analysis to polar solvents shows that this barrier height is a strong function of medium polarity and that the decay pathway becomes near barrierless in more polar media. Thus, the properties of the medium can be used as a route for controlling the motor's excited-state dynamics. The connection between these dynamics and the quantum yield of photochemical isomerization is probed. The photochemical quantum yield is shown to be a much weaker function of solvent polarity, and the most efficient excited-state decay pathway does not lead to a strongly enhanced quantum yield for isomerization. These results are discussed in terms of the solvent dependence of the complex multidimensional excited-state reaction coordinate.

Surface-enhanced Raman spectroscopy (SERS) is an emerging analytical technique for chemical analysis, which is favourable due to its combination of short measurement time, high sensitivity and molecular specificity. However, the application of SERS is still limited, largely because in real samples the analyte is often present in a complex matrix that contains micro/macro particles that block the probe laser, as well as molecular contaminants that compete for the enhancing surface. Here, we show a simple and scalable spray-deposition technique to fabricate SERS-active paper substrates which combine sample filtration and enhancement in a single material. Unlike previous spray-deposition methods, in which simple colloidal nanoparticles were sprayed onto solid surfaces, here the colloidal nanoparticles are mixed with hydroxyethyl cellulose (HEC) polymer before application. This leads to significantly improved uniformity in the distribution of enhancing particles as the film dries on the substrate surface. Importantly, the polymer matrix also protects the enhancing particles from air-oxidation during storage but releases them to provide SERS enhancement when the film is rehydrated. These SERS-paper substrates are highly active and a model analyte, crystal violet, was detected down to 4 ng in 10 μL of sample with less than 20% point-by-point signal deviation. The filter paper and HEC effectively filter out both interfering micro/macro particles and molecular (protein) contaminants, allowing the SERS-paper substrates to be used for SERS detection of thiram in mud and melamine in the presence of protein down to nanogram levels without sample pre-treatment or purification.

A series of iron(IV) oxo complexes, which differ in the donor (CH(2)py or CH2COO-) cis to the oxo group, three with hemilabile pendant donor/second coordination sphere base/acid arms (pyH/py or ROH), have been prepared in water at pH 2 and 7. The nu(Fe=O) values of 832 +/- 2 cm(-1) indicate similar Fe-IV=O bond strengths; however, different reactivities toward C-H substrates in water are observed. HAT occurs at rates that differ by 1 order of magnitude with nonclassical KIEs (k(H)/k(D) = 30-66) consistent with hydrogen atom tunneling. Higher KIEs correlate with faster reaction rates as well as a greater thermodynamic stability of the iron(III) resting states. A doubling in rate from pH 7 to pH 2 for substrate C-H oxidation by the most potent complex, that with a cis-carboxylate donor, [(FeO)-O-IV(Htpena)](2+), is observed. Supramolecular assistance by the first and second coordination spheres in activating the substrate is proposed. The lifetime of this complex in the absence of a C-H substrate is the shortest (at pH 2, 3 h vs up to 1.3 days for the most stable complex), implying that slow water oxidation is a competing background reaction. The iron(IV)=O complex bearing an alcohol moiety in the second coordination sphere displays significantly shorter lifetimes due to a competing selective intramolecular oxidation of the ligand.

Establishing how life can emerge from inanimate matter is among the grand challenges of contemporary science. Chemical systems that capture life’s essential characteristics—replication, metabolism and compartmentalization—offer a route to understanding this momentous process. The synthesis of life, whether based on canonical biomolecules or fully synthetic molecules, requires the functional integration of these three characteristics. Here we show how a system of fully synthetic self-replicating molecules, on recruiting a cofactor, acquires the ability to transform thiols in its environment into disulfide precursors from which the molecules can replicate. The binding of replicator and cofactor enhances the activity of the latter in oxidizing thiols into disulfides through photoredox catalysis and thereby accelerates replication by increasing the availability of the disulfide precursors. This positive feedback marks the emergence of light-driven protometabolism in a system that bears no resemblance to canonical biochemistry and constitutes a major step towards the highly challenging aim of creating a new and completely synthetic form of life. [Figure not available: see fulltext.].

Light activated photosensitizers generate reactive oxygen species (ROS) that interfere with cellular components and can induce cell death, e.g., in photodynamic therapy (PDT). The effect of cellular components and especially proteins on the photochemistry and photophysics of the sensitizers is a key aspect in drug design and the correlating cellular response with the generation of specific ROS species. Here, we show the complex range of effects of binding of photosensitizer to a multidrug resistance protein, produced by bacteria, on the formers reactivity. We show that recruitment of drug like molecules by LmrR (Lactococcal multidrug resistance Regulator) modifies their photophysical properties and their capacity to induce oxidative stress especially in 1O2 generation, including rose bengal (RB), protoporphyrin IX (PpIX), bodipy, eosin Y (EY), riboflavin (RBF), and rhodamine 6G (Rh6G). The range of neutral and charged dyes with different exited redox potentials, are broadly representative of the dyes used in PDT.

Iron centers featuring thiolates in their metal coordination sphere (as ligands or substrates) are well-known to activate dioxygen. Both heme and non-heme centers that contain iron-thiolate bonds are found in nature. Investigating the ability of iron-thiolate model complexes to activate O2 is expected to improve the understanding of the key factors that direct reactivity to either iron or sulfur. We report here the structural and redox properties of a thiolate-based dinuclear Fe complex, [FeII 2(LS)2] (LS2- = 2,2′-(2,2′-bipyridine-6,6′-iyl)bis(1,1-diphenylethanethiolate)), and its reactivity with dioxygen, in comparison with its previously reported protonated counterpart, [FeII 2(LS)(LSH)]+. When reaction with O2 occurs in the absence of protons or in the presence of 1 equiv of proton (i.e., from [FeII 2(LS)(LSH)]+), unsupported μ-oxo or μ-hydroxo FeIII dinuclear complexes ([FeIII 2(LS)2O] and [FeIII 2(LS)2(OH)]+, respectively) are generated. [FeIII 2(LS)2O], reported previously but isolated here for the first time from O2 activation, is characterized by single crystal X-ray diffraction and Mössbauer, resonance Raman, and NMR spectroscopies. The addition of protons leads to the release of water and the generation of a mixture of two Fe-based "oxygen-free" species. Density functional theory calculations provide insight into the formation of the μ-oxo or μ-hydroxo FeIII dimers, suggesting that a dinuclear μ-peroxo FeIII intermediate is key to reactivity, and the structure of which changes as a function of protonation state. Compared to previously reported Mn-thiolate analogues, the evolution of the peroxo intermediates to the final products is different and involves a comproportionation vs a dismutation process for the Mn and Fe derivate, respectively.

Efficient photomolecular motors will be critical elements in the design and development of molecular machines. Optimisation of the quantum yield for photoisomerisation requires a detailed understanding of molecular dynamics in the excited electronic state. Here we probe the primary photophysical processes in the archetypal first generation photomolecular motor, with sub‐50 fs time resolved fluorescence spectroscopy. A bimodal relaxation is observed with a 100 fs relaxation of the Franck‐Condon state to populate a red‐shifted state with a reduced transition moment, which then undergoes multi‐exponential decay on a picosecond timescale. Oscillations due to the excitation of vibrational coherences in the S1 state are seen to survive the ultrafast structural relaxation. The picosecond relaxation reveals a strong solvent friction effect which is thus ascribed to torsion about the C−C axle. This behaviour is contrasted with second generation photomolecular motors; the principal differences are explained by the existence of a barrier on the excited state surface in the case of the first‐generation motors which is absent in the second generation. These results will help to provide a basis for designing more efficient molecular motors in the future., Generation conflict? The excited state dynamics of first‐generation molecular motors are studied by means of ultrafast time resolved fluorescence. A 100 fs structural reorganization in the excited state is followed by a slower excited state relaxation, which is influenced by solvent viscosity. The decay is accompanied by coherent vibrational excitation of modes in the excited electronic state. The observed behaviour is contrasted with that of the second‐generation motors.

A one-pot multi-step method for the oxidative cleavage of alkenes to aldehydes/ketones under ambient conditions is described as an alternative to ozonolysis. The first step is a highly efficient manganese catalyzed epoxidation/cis-dihydroxylation of alkenes. This step is followed by an Fe(III) assisted ring opening of the epoxide (where necessary) to a 1,2-diol. Carbon-carbon bond cleavage is achieved by treatment of the diol with sodium periodate. The conditions used in each step are not only compatible with the subsequent step(s), but also provide for increased conversion compared to the equivalent reactions carried out on the isolated intermediate compounds. The described procedure allows for carbon-carbon bond cleavage in the presence of other alkenes, oxidation sensitive moieties and other functional groups; the mild conditions (r.t.) used in all three steps make this a viable general alternative to ozonolysis and especially for use under flow or continuous batch conditions.

In search for cobalt replacements for alkyd paint curing we show that the photo-active complex [(Cp)Fe(C6H6)]+ (Cp = cyclopentadienyl) acts as a latent catalytic drier that allows for photochemical control over the onset of curing, without the need for anti-skinning agents such as the volatile MEKO normally used to prevent curing during paint storage. The highly soluble neutral complex [(Cp)Fe(Ch)] (Ch = cyclohexadienyl) readily converts to the photo-active complex [(Cp)Fe(C6H6)]+ upon oxidation in alkyd, allowing the latter to be dosed in a wide range of concentrations. Infrared and Raman studies show similar spectral changes of the alkyd paint matrix as have been observed in alkyd curing mediated by the known commercial cobalt- and manganese-based driers Durham NUODEX® Cobalt 10 Neo and NUODEX® DryCoat. The new [(Cp)Fe(Ch)] / [(Cp)Fe(C6H6)]+ system performs equally well as both commercial paint driers in terms of drying time, and outperforms NUODEX® DryCoat by showing a hardness development (increase) similar to the cobalt-based drier. Based on an observed light-dark on/off effect and EPR studies we propose that photolysis of [(Cp)Fe(C6H6)]+ generates short-lived active FeII species, explaining the excellent latency. The novel alkyd curing system [(Cp)Fe(Ch)] / [(Cp)Fe(C6H6)]+ presented herein is the first example of an intrinsically latent paint curing catalyst that is: (1) based on an abundant and harmless transition metal (Fe), (2) doesn’t require any anti-skinning agents, and (3) shows excellent performance in terms of drying times and hardness development.

The complex [FeIII2(μ-O2)(L3)4(S)2]4+ (L3 = 2-(4-thiazolyl)benzimidazole, S = solvent) forms upon reaction of [FeII(L3)2] with H2O2 and is a functional model of peroxo-diiron intermediates invoked during the catalytic cycle of oxidoreductases. The spectroscopic properties of the complex are in line with those of complexes formed with N-donor ligands. [FeIII2(μ-O2)(L3)4(S)2]4+ shows both nucleophilic (aldehydes) and electrophilic (phenol, N,N-dimethylanilines) oxidative reactivity and unusually also electron transfer oxidation., A bidentate ligand based iron complex shows nucleophillic and electrophillice reactivity in the oxidation of organic substrates.

The bistability of molecular switches is an essential characteristic in their use as functional components in molecular-based devices and machines. For photoswitches, light-driven switching between two stable states proceeds via short-lived changes of the bond order in electronically excited states. Here, bistable switching of a ditertbutyl-substituted spiropyran photoswitch is instead demonstrated by oxidation and subsequent reduction in an overall four-state cycle. The spiropyran structure chosen has reduced sensitivity to the effect of secondary electrochemical processes such as H+ production and provides transient access to a decreased thermal Z-E isomerization barrier in the one electron oxidized state, akin to that achieved in the corresponding photochemical path. Thus, we show that the energy needed for switching spiropyrans to the merocyanine form on demand, typically delivered by a photon, can instead be provided electrochemically. This opens up further opportunities for the utilization of spiropyrans in electrically controlled applications and devices.

Although light is a prominent stimulus for smart materials, the application of photoswitches as light-responsive triggers for phase transitions of porous materials remains poorly explored. Here we incorporate an azobenzene photoswitch in the backbone of a metal-organic framework producing light-induced structural contraction of the porous network in parallel to gas adsorption. Light-stimulation enables non-invasive spatiotemporal control over the mechanical properties of the framework, which ultimately leads to pore contraction and subsequent guest release via negative gas adsorption. The complex mechanism of light-gated breathing is established by a series of in situ diffraction and spectroscopic experiments, supported by quantum mechanical and molecular dynamic simulations. Unexpectedly, this study identifies a novel light-induced deformation mechanism of constrained azobenzene photoswitches relevant to the future design of light-responsive materials.

International audience; he spiropyran family of photochromes are key components in molecular-based responsive materials and devices, e.g., as multiphotochromes, covalently coupled dyads, triads, etc. This attention is in no small part due to the change in properties that accompany the switch between spiropyran and merocyanine forms. Although the spiropyran is a single structural isomer, the merocyanine form represents a family of isomers (TTT, TTC, CCT, etc.) and protonation states. Combining two spiropyrans into one compound increases the number of possible structures dramatically and the interaction between the units determines, which are impeded due to intramolecular quenching of excited states. Here, we show that the coupling of two spiropyran photochromes through their phenol units yields favorable interactions (crosstalk) between the components that provides access to species inaccessible with the component monospiropyran alone. Specifically, the ring opening of one spiropyran unit, which is thermally stable at -30 °C, prevents ring opening of the second spiropyran unit. Furthermore, whereas protonated E- and Z-monomerocyanines were previously shown to undergo thermal- and photo-equilibration, the corresponding protonated E- and Z- bimerocyanines are thermally stable and show one-way photoisomerization from the Z,Z- to an emissive E,E-bimerocyanine form. Subsequent deprotonation at room temperature resets the system to the bispiro ring-closed form, but deprotonation at -30 °C yields the otherwise inaccessible bimerocyanine form. This form is photochemically inert but undergoes a two-step thermal relaxation via the merocyanine-spiropyran form, showing that the connection at the phenol units provides sufficient intramolecular interaction to fine-tune the complex isomerization pathways of spiropyrans and demonstrating noncommutability in photo- and pH-regulated multistep isomerization pathways.

Although iron is among the most abundant of the bio-essential transition metals and its coordination chemistry is of central importance to bio-inorganic and bioinspired chemistry, its photochemistry has been overshadowed by ruthenium polypyridyl complexes since the 1970s. The photochemistry of iron complexes is nevertheless rich and presents a multitude of opportunities in a wide range of fields. Here, we review the state of the art and especially recent progress in the photochemistry of iron complexes, focusing on aspects of relevance to environmental, biological and photocatalytic chemistry.

The iron(III) complex [Fe(tpena)]2+ (tpena = N,N,N′-tris(2-pyridylmethyl)ethylendiamine-N′-acetate) undergoes irreversible O2-dependent N-demethylcarboxylation to afford [FeII(SBPy3)(MeCN)]2+ (SBPy3 = N,N-bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-aldimine), when irradiated with near-UV light. The loss of a mass equivalent to the glycyl group in a process involving consecutive C-C and C-N cleavages is documented by the measurement of the sequential production of CO2 and formaldehyde, respectively. Time-resolved UV-vis absorption, Mössbauer, EPR, and Raman spectroscopy have allowed the spectroscopic characterization of two iron-based intermediates along the pathway. The first of these, proposed to be a low-spin iron(II)-radical ligand complex, reacts with O2 in the rate-determining step to produce a putative alkylperoxide complex. DFT calculations suggest that this evolves into an Fe(IV)-oxo species, which can abstract a hydrogen atom from a cis methylene group of the ligand to give the second spectroscopically identified intermediate, a high-spin iron(III)-hydroxide of the product oxidized ligand, [FeIII(OH)(SBPy3)]2+. Reduction and exchange of the cohydroxo/water ligand produces the crystallographically characterized products [FeII(SBPy3)(X)]2+/3+, X = MeCN, [Zn(tpena)]+.

Spiropyrans undergo C-spiro-O bond breaking to their ring-open protonated E-merocyanine form upon protonation and irradiation via an intermediate protonated Z-merocyanine isomer. We show that the extent of acid-induced ring opening is controlled by matching both the concentration and strength of the acid used and with strong acids full ring opening to the Z-merocyanine isomer occurs spontaneously allowing its characterization by H-1 NMR spectroscopy as well as UV/vis spectroscopy, and reversible switching between Z/E-isomerization by irradiation with UV and visible light. Under sufficiently acidic conditions, both E- and Z-isomers are thermally stable. Judicious choice of acid such that its pK(a) lies between that of the E- and Z-merocyanine forms enables thermally stable switching between spiropyran and E-merocyanine forms and hence pH gating between thermally irreversible and reversible photochromic switching.

Soluble model compounds, such as flavones, are frequently employed in initial and mechanistic studies under homogeneous conditions in the search for effective bleaching catalysts for raw cotton. The relevance of model substrates, such as morin and chrysin, and especially their reactivity with manganese catalysts [i.e. in combination with 1,4,7-triazacyclononane (tacn) based ligands] applied in raw cotton bleaching with H2O2 in alkaline solutions is examined. We show that morin, used frequently as a model, is highly sensitive to oxidation with O-2, by processes catalyzed by trace metal ions, that can be accelerated photochemically, although not involve generation of O-1(2). The structurally related chrysin is not susceptible to such photo-accelerated oxidation with O-2. Furthermore, chrysin is oxidized by H2O2 only in the presence of a Mn-tacn based catalyst, and does not undergo oxidation with O-2 as terminal oxidant. Chrysin mimics the behavior of raw cotton's chromophores in their catalyzed oxidation with H2O2, and is likely a mechanistically relevant model compound for the study of transition metal catalysts for dye bleaching catalysts under homogeneous conditions.

Non-heme (L)Fe-III and (L)Fe-III-O-Fe-III(L) complexes (L=1,1-di(pyridin-2-yl)-N,N-bis(pyridin-2-ylmethyl)-ethan-1-amine) underwent reduction under irradiation to the Fe-II state with concomitant oxidation of methanol to methanal, without the need for a secondary photosensitizer. Spectroscopic and DFT studies support a mechanism in which irradiation results in charge-transfer excitation of a Fe-III-mu-O-Fe-III complex to generate [(L)Fe-IV=O](2+) (observed transiently during irradiation in acetonitrile), and an equivalent of (L)Fe-II. Under aerobic conditions, irradiation accelerates reoxidation from the Fe-II to the Fe-III state with O-2, thus closing the cycle of methanol oxidation to methanal.

A versatile approach to the preparation of [Ir(LL)(2)Cl-2](PF6) type complexes is reported, in which LL is an (NN)-N- bound polypyridyl ligand [X(2)bpy, X(2)phen, where X = H-, CH3-, (CH3)(3)C-, or phenyl-, and bpy = 2,2-bipyridyl, phen = 1,10-phenanthroline] as well as their deuterated analogues. In the synthesis of [Ir(bpy)(2)Cl-2]PF6 (I) and its deuterated analogue (III), the cyclometallated complexes [Ir(bpy)(2)(bpy-C-N)](PF6)(2) (II) and [Ir([D-8]-bpy)(2)([D-8]-bpy-C-N)](PF6)(2) (IV) were also obtained. The complexes are characterised by H-1 NMR, UV/Vis absorption and emission spectroscopy. The effect of deuteration on emission quantum yields and emission lifetimes is discussed. The ready availability of these complexes through efficient scaleable synthetics routes opens new opportunities for their use, especially in energy related applications.

The reactivity of [Fe III(tpena)] 2+ (tpena=N,N,N′-tris(2-pyridylmethyl)ethylenediamine-N′-acetate) as a catalyst for oxidation reactions depends on its ratio to the terminal oxidant H 2O 2 and presence or absence of sacrificial substrates. The outcome can be switched between: 1) catalysed H 2O 2 disproportionation, 2) selective catalytic oxidation of methanol or benzyl alcohol to the corresponding aldehyde, or 3) oxidative decomposition of the tpena ligand. A common mechanism is proposed involving homolytic O−O cleavage in the detected transient purple low-spin (S=1/2) [(tpenaH)Fe IIIO−OH] 2+. The resultant iron(IV) oxo and hydroxyl radical both participate in controllable hydrogen-atom transfer (HAT) reactions. Consistent with the presence of a weaker σ-donor carboxylate ligand, the most pronounced difference in the spectroscopic properties of [Fe(OOH)(tpenaH)] 2+ and its conjugate base, [Fe(OO)(tpenaH)] +, compared to non-heme iron(III) peroxide analogues supported by neutral multidentate N-only ligands, are slightly blue-shifted maxima of the visible absorption band assigned to ligand-to-metal charge-transfer (LMCT) transitions and, corroborating this, lower Fe III/Fe II redox potentials for the pro-catalysts.

α-Hydroxy ketones are valuable synthons in organic chemistry. Here we show that oxidation of vic-diols to α-hydroxy ketones with H2O2 can be achieved with an in situ prepared catalyst based on manganese salts and pyridine-2-carboxylic acid. Furthermore the same catalyst is effective in alkene epoxidation, and it is shown that alkene oxidation with the MnII catalyst and H2O2 followed by Lewis acid ring opening of the epoxide and subsequent oxidation of the alkene to α-hydroxy ketones can be achieved under mild (ambient) conditions.

High-resolution laser spectroscopy in combination with molecular beams and mass-spectrometry has been applied to study samples of a prototypical rotary motor. Vibrationally well-resolved excitation spectra have been recorded that are assigned, however, to a structural isomer of the original rotary motor which is formed in situ under the elevated temperatures required experimentally. In this isomer the 'rotor' and 'stator' parts are to a large extent conjugationally disconnected leading to excited-state properties that are dominantly determined by the 'rotor' with the 'stator' acting as observer.

A reactive high-valent dinuclear nickel(IV) oxido bridged complex is reported that can be formed at room temperature by reaction of [(L) 2 Ni(II) 2 (μ-X) 3 ]X (X = Cl or Br) with NaOCl in methanol or acetonitrile (where L = 1,4,7-trimethyl-1,4,7-triazacyclononane). The unusual Ni(IV) oxido species is stabilized within a dinuclear tris-μ-oxido-bridged structure as [(L) 2 Ni(IV) 2 (μ-O) 3 ] 2+ . Its structure and its reactivity with organic substrates are demonstrated through a combination of UV-vis absorption, resonance Raman, 1 H NMR, EPR, and X-ray absorption (near-edge) spectroscopy, ESI mass spectrometry, and DFT methods. The identification of a Ni(IV)-O species opens opportunities to control the reactivity of NaOCl for selective oxidations The Ubbo Emmius fund of the University of Groningen, the European Research Council (StG, no. 279549, W.R.B.), NWO for a VIDI grant (723.014.010, D.J.M. and M.T.), The Netherlands Ministry of Education, Culture and Science (Gravity program 024.001.035, W.R.B.), MINECO (CTQ2014-59212-P and CTQ2015-70851-ERC, M.S.), Gen- Cat (2014SGR1202, M.S.), FEDER (UNGI10-4E-801, M.S.), and COST action CM1305 “ECOSTBio” (W.R.B., COSTSTSM- CM1305-29045) are acknowledged for financial support

We present the first high-resolution rotational spectrum of an artificial molecular rotary motor. By combining chirped-pulse Fourier transform microwave spectroscopy and supersonic expansions, we captured the vibronic ground-state conformation of a second-generation motor based on chiral, overcrowded alkenes. The rotational constants were accurately determined by fitting more than 200rotational transitions in the 2-4GHz frequency range. Evidence for dissociation products allowed for the unambiguous identification and characterization of the isolated motor components. Experiment and complementary quantum-chemical calculations provide accurate geometrical parameters for the C27H20 molecular motor, the largest molecule investigated by high-resolution microwave spectroscopy to date.

Photochemical isomerization in sterically crowded chiral alkenes is the driving force for molecular rotary motors in nanoscale machines. Here the excited-state dynamics and structural evolution of the prototypical light-driven rotary motor are followed on the ultrafast time scale by femtosecond stimulated Raman spectroscopy (FSRS) and transient absorption (TA). TA reveals a sub-100-fs blue shift and decay of the Franck-Condon bright state arising from relaxation along the reactive potential energy surface. The decay is accompanied by coherently excited vibrational dynamics which survive the excited-state structural evolution. The ultrafast Franck-Condon bright state relaxes to a dark excited state, which FSRS reveals to have a rich spectrum compared to the electronic ground state, with the most intense Raman-active modes shifted to significantly lower wavenumber. This is discussed in terms of a reduced bond order of the central bridging bond and overall weakening of bonds in the dark state, which is supported by electronic structure calculations. The observed evolution in the FSRS spectrum is assigned to vibrational cooling accompanied by partitioning of the dark state between the product isomer and the original ground state. Formation of the product isomer is observed in real time by FSRS. It is formed vibrationally hot and cools over several picoseconds, completing the characterization of the light-driven half of the photocycle.

Photochemically driven molecular motors convert the energy of incident radiation to intramolecular rotational motion. The motor molecules considered here execute four step unidirectional rotational motion. This comprises a pair of successive light induced isomerizations to a metastable state followed by thermal helix inversions. The internal rotation of a large molecular unit required in these steps is expected to be sensitive to both the viscosity of the medium and the volume of the rotating unit. In this work, we describe a study of motor motion in both ground and excited states as a function of the size of the rotating units. The excited state decay is ultrafast, highly non-single exponential, and is best described by a sum of three exponential relaxation components. The average excited state decay time observed for a series of motors with substituents of increasing volume was determined. While substitution does affect the lifetime, the size of the substituent has only a minor effect. The solvent polarity dependence is also slight, but there is a significant solvent viscosity effect. Increasing the viscosity has no effect on the fastest of the three decay components, but it does lengthen the two slower decay times, consistent with them being associated with motion along an intramolecular coordinate displacing a large solvent volume. However, these slower relaxation times are again not a function of the size of the substituent. We conclude that excited state decay arises from motion along a coordinate which does not necessarily require complete rotation of the substituents through the solvent, but is instead more localized in the core structure of the motor. The decay of the metastable state to the ground state through a helix inversion occurs 14 orders of magnitude more slowly than the excited state decay, and was measured as a function of substituent size, solvent viscosity and temperature. In this case neither substituent size nor solvent viscosity influences the rate, which is entirely determined by the activation barrier. This result is different to similar studies of an earlier generation of molecular motors, which suggests different microscopic mechanisms are in operation in the different generations. Finally, the rate of photochemical isomerization was studied for the series of motors, and those with the largest volume substituents showed the highest photochemical cross section.

The effect of a minor difference in ligand structure is shown to have a large effect on the photochemical pathways followed by two ruthenium(II) polypyridyl based complexes [Ru(CH3CN) (LL)](2+), 1 and 2, where LL is MeN4Py (1,1-di(pyridin-2-yl)-N,N-bis (pyridin-2-yl-methyl) ethan-1-amine) or N4Py (1,1-di (pyri din-2-yl)-N,N-bis (pyridin-2-yl-m ethyl) methanamine), respectively. In our earlier report we demonstrated near completely reversible two-way photochromism of 1, in which a pyridyl ring dissociated on irradiation with visible light to form the thermally stable 1P, [Ru(CH3CN)(2)(MeN4Py)](2+). Complex 1 was recovered upon irradiation in the near-UV. Here, we show that the methyl group in the ligand backbone is critical to the reversibility by impeding the dissociation of one of the two sets of pyridyl rings. Irradiation of 2, which does not bear the methyl group, with visible light results in formation of two thermally stable isomers 2a and 2b, which are characterized by UV-vis absorption, FTIR, H-1 NMR spectroscopy, ESI mass spectrometry, and X-ray crystallography. In contrast to 1P, in both 2a and 2b, a different pyridyl moiety is dissociated. Whereas UV irradiation returns 2a to its original state (2), the overall reversibility is limited by the relative stability of 2b. The changes to the structure of 2 made possible by the increased freedom for all four pyridyl moieties to dissociate allows access to coordination modes that are not accessible thermally opening opportunities toward new catalysts for oxidation chemistry, photochromism and photoswitching.

Phenolato moieties impart redox flexibility to metal complexes due their accessible (oxidative) redox chemistry and have been proposed as functional ligand moieties in redox non-innocent ligand based transition metal catalysis. Here, the electro- and spectroelectrochemistry of phenolato based μ-oxodiiron(III) complexes [(L1)Fe(μ-O)Fe(L1)]2+ (1) and [(L2)Fe-(μ-O)Fe(L2)]2+ (2), where L1 = 2-(((di(pyridin-2-yl)methyl)-(pyridin-2-ylmethyl)amino)methyl)phenol and L2 = 3, 5-di-tert-butyl-2-(((di(pyridin-2-yl)methyl)(pyridin-2-ylmethyl)amino)-methyl)phenol, is described. The electrochemical oxidation of 1 in dichloromethane results in aryl C-C coupling of phenoxyl radical ligand moieties to form tetra nuclear complexes, which undergo subsequent oxidation to form iron(III) phenolato based polymers (poly-1). The coupling is blocked by placing tert-butyl groups at para and ortho positions of phenol units (i.e., 2). Poly-1 shows two fully reversible redox processes in monomer free solution. Assignment of species observed during the electrochemical and chemical {(NH4)2[CeIV(NO3)6]} oxidation of 1 in acetonitrile is made by comparison with the UV-vis-NIR absorption and resonance micro-Raman spectroelectrochemistry of poly-1, and by DFT calculations, which confirms that oxidative coupling occurs in acetonitrile also. However, in contrast to that observed in dichloromethane, in acetonitrile, the oligomers formed are degraded in terms of a loss of the Fe(III)-O-Fe(III) bridge by protonation. The oxidative redox behavior of 1 and 2 is, therefore, dominated by the formation and reactivity of Fe(III) bound phenoxyl radicals, which considerably holds implications in regard to the design of phenolato based complexes for oxidation catalysis The European Research Council (StG, no. 279549, D.U.,W.R.B.) and the Ministry of Education, Culture and Science(Gravity program 024.001.035, W.R.B.), the Ministerio de Economia y Competitividad (MINECO, projects CTQ2014-59212-P and CTQ2015-70851-ERC, M.S.), the DIUE of the Generalitat de Catalunya (project 2014SGR1202, M.S.), and the European Fund for Regional Development (FEDER, UNGI10-4E-801, M.S.) are acknowledged for financial support. A. van Dam (ERIBA, University of Groningen) is thanked for assistance with a recording of ESI-MS spectra. L. Kortekaas (University of Groningen) is acknowledged for discussion. This work was performed in the framework of the COST action CM1305 “Explicit Control Over Spin-states in Technology and Biochemistry (ECOSTBio)” (with support of an STSM to W.R.B., COST-STSM-CM1305-29045)

We report the design, synthesis and study of nanotube-forming light-responsive amphiphiles, in which chirality can be used as a means to control the morphologies of self-assembled structures., The concept of using chirality to dictate dimensions and to store chiral information in self-assembled nanotubes in a fully controlled manner is presented. We report a photoresponsive amphiphile that co-assembles with its chiral counterpart to form nanotubes and demonstrate how chirality can be used to effect the formation of either micrometer long, achiral nanotubes or shorter (∼300 nm) chiral nanotubes that are bundled. The nature of these assemblies is studied using a variety of spectroscopic and microscopic techniques and it is shown that the tubes can be disassembled with light, thereby allowing the chiral information to be erased.

The Fe III/Fe II redox potentials for [Fe(tpen)] 2+/3+, [Fe(tpena)] +/2+, and [Fe(tpenO)] +/2+ ( N-R- N, N' ,N'-tris(2-pyridylmethyl)ethane-1,2-diamine, where R = CH 2C 6H 4N, CH 2COO -, CH 2CH 2O -, respectively) span 470 mV with the oxidation potentials following the order [Fe II(tpenO)] + (MeOH) < [Fe II(tpena)] + (MeCN) < [Fe II(tpen)] 2+ (MeCN). In their +3 oxidation states the complexes react with 1 equiv of H 2O 2 to give the purple [Fe III(OOH)(HL)] n+ ( n = 2 for L = tpena, tpenO; n = 3 for L = tpen). A pyridine arm is decoordinated in these complexes, furnishing a second coordination sphere base which is protonated at ambient pH. The lifetimes of these transient species depend on how readily the substrate (sometimes the solvent) is oxidized and reflect the trend in both the O-O bond lability and oxidizing potency of the putative iron-based oxidant derived from the iron(III) peroxides. In methanol solution, [Fe III(tpenO)] 2+ and [Fe III(tpena)] 2+ exist in their Fe(III) states and hence the formation of [Fe III(OOH)(Htpena)] 2+ and [Fe III(OOH)(HtpenO)] 2+ is instantaneous. This is in contrast to the short lag time that occurs before adduct formation between [Fe II(tpen)] 2+ and H 2O 2 due to the requisite prior oxidation of the solution-state iron(II) complex to its iron(III) state. Stabilization of the +3 iron oxidation state in the resting state catalysts affords complexes that activate H 2O 2 more readily with the consequence of higher yields in the oxidation of the C-H bonds using H 2O 2 as terminal oxidant. The presence of a cis monodentate carboxylato donor increases the rate of oxidation by hydrogen atom transfer in comparison to the systems with an alkoxo or pyridine in this position. Competing with substrate oxidation is the oxidative modification of the alkoxido group in [Fe III(tpenO)] 2+, converting it to a carboxylato group in the presence of H 2O 2: in effect, transforming tpenO to tpena.

The upgrading of complex bio-renewable feedstock, such as lignocellulose, through depolymerisation benefits from the selective reactions at key functional groups. Applying homogeneous catalysts developed for selective organic oxidative transformations to complex feedstock such as lignin is challenged by the presence of interfering components. The selection of appropriate model compounds is essential in applying new catalytic systems and identifying such interferences. Here, it was shown by using as an example the oxidation of a model substrate containing a beta-O-4 linkage with H2O2 and an in situ-prepared manganese-based catalyst, capable of efficient oxidation of benzylic alcohols, that interference from compounds liberated during the reaction can prevent its application to lignocellulose depolymerisation.

Spiropyrans have played a pivotal role in the emergence of the field of chromism following their discovery in the early 20th century, with almost ubiquitous use in materials applications especially since their photochromism was discovered in 1952. Their versatility continues to lend them to application in increasingly diverse fields not least due to recent discoveries of properties that have expanded their utility extensively. This review provides an overview of their rich history and highlights the contemporary relevance of the spiropyrans.

Controlling the excited-state properties of light driven molecular machines is crucial to achieving high efficiency and directed functionality. A key challenge in achieving control lies in unravelling the complex photodynamics and especially in identifying the role played by dark states. Here we use the structure sensitivity and high time resolution of UV-pump/IR-probe spectroscopy to build a detailed and comprehensive model of the structural evolution of light driven molecular rotors. The photodynamics of these chiral overcrowded alkene derivatives are determined by two close-lying excited electronic states. The potential energy landscape of these "bright" and "dark" states gives rise to a broad excited-state electronic absorption band over the entire mid-IR range that is probed for the first time and modeled by quantum mechanical calculations. The transient IR vibrational fingerprints observed in our studies allow for an unambiguous identification of the identity of the "dark" electronic excited state from which the photon's energy is converted into motion, and thereby pave the way for tuning the quantum yield of future molecular rotors based on this structural motif.

Reaction bifurcation processes are often encountered in the oxidation of substrates by enzymes and generally lead to a mixture of products. One particular bifurcation process that is common in biology relates to electron transfer versus oxygen atom transfer by high-valent iron(IV)-oxo complexes, which nature uses for the oxidation of metabolites and drugs. In biomimicry and bioremediation, an important reaction relates to the detoxification of ClOx - in water, which can lead to a mixture of products through bifurcated reactions. Herein we report the first three water-soluble non-heme iron(II) complexes that can generate chlorine dioxide from chlorite at ambient temperature and physiological pH. These complexes are highly active oxygenation oxidants and convert ClO2 - into either ClO2 or ClO3 via high-valent iron(IV)-oxo intermediates. We characterize the short-lived iron(IV)-oxo species and establish rate constants for the bifurcation mechanism leading to ClO2 and ClO3 - products. We show that the ligand architecture of the metal center plays a dominant role by lowering the reduction potential of the metal center. Our experiments are supported by computational modeling, and a predictive valence bond model highlights the various factors relating to the substrate and oxidant that determine the bifurcation pathway and explains the origins of the product distributions. Our combined kinetic, spectroscopic, and computational studies reveal the key components necessary for the future development of efficient chlorite oxidation catalysts.

The effect of the catalytic moiety on the early-time photodynamics of Ru/M (M=Pt or Pd) bimetallic photocatalysts is studied by ultrafast transient absorption spectroscopy. In comparison to the Ru/Pd photocatalyst described earlier, the Ru/Pt analogue shows complex excited-state dynamics with three distinct kinetic components ranging from sub-ps to 10(2) ps, requiring a more sophisticated photophysical model than that developed earlier for the Ru/Pd complex. In the Pu/Pt photocatalyst, an additional lower-lying excited state is proposed to quench the hot higher-lying triplet metal-to-ligand charge-transfer states. Furthermore, a strong excitation wavelength dependence on the population of excited states is observed for both the Ru/Pt and Ru/Pd complexes, indicating a non-equilibrated distribution even on the 10(2) ps timescale. These insights shed light on the significant impact of the catalytic moiety on the fundamental early-time photophysics of Ru-based photocatalysts.

The oxidation of alkenes, alkanes, and alcohols with H2O2 is catalyzed efficiently using an in situ prepared catalyst comprised of a MnII salt and pyridine-2-carboxylic acid (PCA) together with a ketone in a wide range of solvents. The mechanism by which these reactions proceed is elucidated, with a particular focus on the role played by each reaction component: i.e., ketone, PCA, MnII salt, solvent, etc. It is shown that the equilibrium between the ketone cocatalysts, in particular butanedione, and H2O2 is central to the catalytic activity observed and that a gem-hydroxyl-hydroperoxy species is responsible for generating the active form of the manganese catalyst. Furthermore, the oxidation of the ketone to a carboxylic acid is shown to antecede the onset of substrate conversion. Indeed, addition of acetic acid either prior to or after addition of H2O2 eliminates a lag period observed at low catalyst loading. Carboxylic acids are shown to affect both the activity of the catalyst and the formation of the gem-hydroxyl-hydroperoxy species. The molecular nature of the catalyst itself is explored through the effect of variation of MnII and PCA concentration, with the data indicating that a MnII:PCA ratio of 1:2 is necessary for activity. A remarkable feature of the catalytic system is that the apparent order in substrate is 0, indicating that the formation of highly reactive manganese species is rate limiting.

The photocatalytic generation of hydrogen (H2) from protons by two cyclometalated ruthenium-platinum polypyridyl complexes, [Ru(bpy)2(2,5-bpp)PtIS](2+) (1) and [Ru(dceb)2(2,5-bpp)PtIS](2+) (2) [where bpy = 2,2'-bipyridine, 2,5-bpp = 2,2',5',2″-terpyridine, dceb = 4,4'-di(carboxyethyl)bipyridine, and S = solvent], is reported. Turnover numbers (TONs) for H2 generation were increased by nearly an order of magnitude by the introduction of carboxyethyl ester units, i.e., from 80 for 1P to 650 for 2P after 6 h of irradiation, with an early turnover frequency (TOF) increasing from 15 to 200 h(-1). The TON and TOF values for 2P are among the highest reported to date for supramolecular photocatalysts. The increase correlates with stabilization of the excited states localized on the peripheral ligands of the light-harvesting Ru(II) center.

Smart or functional surfaces that exhibit complex multimodal responsivity, e.g., to light, heat, pH, etc., although highly desirable, require a combination of distinct functional units to achieve each type of response and present a challenge in achieving combinations that can avoid cross-talk between the units, such as excited-state quenching. Compounds that exhibit multiple switching modalities help overcome this challenge and drastically reduce the synthetic cost and complexity. Here we show that a bis-spiropyran photochrome, which is formed through coupling at the indoline 5-position using redox chemistry, exhibits pH-gated photochromism, with opening of the spiro moiety by irradiation with UV light and the expected reversion by either heating or irradiation with visible light gated by protonation/deprotonation. Remarkably, when the photochrome is oxidized to its dicationic form, bis-spiropyran(2+), visible light can be used instead of UV light to switch between the spiro and merocyanine forms, with locking and unlocking of each state achieved by protonation/deprotonation. The formation of the bis-spiropyran unit by electrochemical coupling is exploited to generate "smart surfaces", i.e., polymer-modified electrodes, avoiding the need to introduce an ancillary functional group for polymerization and the concomitant potential for cross-talk. The approach taken means not only that the multiresponsive properties of the bis-spiropyran are retained upon immobilization but also that the effective switching rate can be enhanced dramatically.

A Mn II complex, [Mn(dpeo) 2] 2+ (dpeo=1,2-di(pyridin-2-yl)ethanone oxime), activates O 2, with ensuing stepwise oxidation of the methylene group in the ligands providing an alkoxide and ultimately a ketone group. X-ray crystal-structure analysis of an intermediate homoleptic alkoxide Mn III complex shows tridentate binding of the ligand via the two pyridyl groups and the newly installed alkoxide moiety, with the oxime group no longer coordinated. The structure of a Mn II complex of the final ketone ligand, cis-[MnBr 2(hidpe) 2] (hidpe=2-(hydroxyimino)-1,2-di(pyridine-2-yl)ethanone) shows that bidentate oxime/pyridine coordination has been resumed. H 2 18O and 18O 2 labeling experiments suggest that the inserted O atoms originate from two different O 2 molecules. The progress of the oxygenation was monitored through changes in the resonance-enhanced Raman bands of the oxime unit.

The authors regret that incorrect details were provided for ref. 13 in the original article. The correct version of ref. 13 is provided below as ref. 1. The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.